46504946 supply of supply of tertiary locking pin as per rdsupply of tertiary locking pin as per rd,supply of tertiary locking pin as per rdso specification no. rdso/2011/cg 03 (rev.01). ma ke frontier alloy steel ltd. only. firms accepted make fas. [ warranty period: 30 months after the date of delivery ] ]...
46452875 supply of high grade alloy steel four leg grade 80 chain slinghigh grade alloy steel four leg grade 80 chain sling,high grade alloy steel four leg grade 80 chain sling type fsl swl 25 ton capacity and tasted to 50 ton capacity fitted with common master oblong ring assembly with two nos. sub link as per following specification to is: 2760 1980. as per annexure. [ warranty period: 30 months after the date of delivery ] ] => limited...
46438091 supply of four legged 22mm diafour legged 22mm dia,four legged 22mm dia, alloy steel gr. 80 chain sling with o ring of 32mm dia x160mm dia i d & intermediate link of 18mm dia x 75mm 40mm on top & connected with joining link of 14mm dia x 60m m dia x35mm at both ends having forged steel eye hook at bottom chain conforming to is:6215, hook conf orming to is:3822, chain sling conforming to is:3822, chain sling conforming to is:2760 1980. capacity 10 ton, tested to proof load 15 ton 22mm dia x effective length 3 meter. carring capacity of each hook must be 5 ton. [ warranty period: 30 months after the date of delivery ] ] => limited...
46401497 supply of supply of p seriessupply of p series,supply of p series triple spur geared chain pulley block alloy steel load chain gr 80. dia & hand chain as per g 30, 5mm dia, powder coating, hook is:15560 with safety latches capacity: 2 ton h eight of lift: 10meters make: ara or indef or similar. [ warranty period: 30 months after the date of deli very ] ] , supply of p series triple spur geared chain pulley block alloy steel load chain gr 80, dia & hand chain as per g 30, 5mm dia, powder coating, hook is:15560 with safety latches capacity: 3 ton, height of lift: 10meters make: ara or indef or similar. [ warranty period: 30 months after the date of de livery ] ]...
46325807 supply of spark lighter made of alloy steel materialspark lighter made of alloy steel material,spark lighter made of alloy steel material with surface for corrosion protection with single sto ne. make bishwas or similar [ warranty period: 30 months after the date of delivery ] ]...
45950074 supply of four leg alloy steel sling chain grade 80four leg alloy steel sling chain grade 80,four leg alloy steel sling chain grade 80 with eye hock (with safety lock) as pe r is:3822 at one end and assembly confirming to is:2760/1980 with proof load test certificate from goverment approved test lab , length 4 metre capacity 10 ton(swl) [ warr anty period: 30 months after the date of delivery ] ] => limited...
45948867 supply of double leg alloy steel sling chain grade 80double leg alloy steel sling chain grade 80,double leg alloy steel sling chain grade 80 with eye hock (with safety lock) as per is:3822 at one end and assembly confirming to is:2760/1980 with proof load test certificate from goverment approved test lab , length 3 metre capacity 5 ton(swl) [ warra nty period: 30 months after the date of delivery ] ] , four leg alloy steel sling chain grade 80 with eye hock (with safety lock) as pe r is:3822 at one end and assembly confirming to is:2760/1980 with proof load test certificate from goverment approved test lab , length 3 metre capacity 5 ton(swl) [ warra nty period: 30 months after the date of delivery ] ] => limited...
45741553 bids are invited for 100242623 10 m0171131000 bar,circular,ss,aisi316,25mm , 100242623 20 m0171131602 bar,circular,ss,aisi316,40mm , 100242623 30 m0171133200 bar,circular,ss,aisi316,80mm , 100242623 40 m0171181005 bar,circular,ss,aisi410,25x2000mm , 100242623 50 m0171181209 bar,circular,ss,aisi410,30mm , 100242623 60 m0171181607 bar,circular,ss,aisi410,40mm , 100242623 70 m0171184004 bar,circular,ss,aisi410,100mm , 100242623 80 m0171182804 bar,circular,ss,aisi410,70mm , 100245983 20 m0171110328 bar,circular,ss,aisi304,8mm , 100245983 30 m0171110407 bar,circular,ss,aisi304,10mm , 100245983 80 m0188852128 wire mesh pl weld mesh,ss,aisi304,50mm ss rod bar material high strength deformed steel bars and wires for concrete reinforcement conforming to is 1786, weight lock, sweeping ss handle broom stick, drill rods for tools, towel rail ring for bathroom, wrought aluminium and aluminium alloys bars, rods and sections (general engineering purposes) as per is 733, copper rods and bars for electrical purposes is:613, counter chair (bar pub), electrodes for manual metal arc welding of stainless steel and other similar high alloy steels as per is 5206, metal beds (v2) 1 13 total quantity : 5600...
45710109 supply of mechanical connectormechanical connector,mechanical connector (link g) for single leg chain and grade 80 alloy steel chain of the ca pacity 12.5 mt. [ warranty period: 30 months after the date of delivery ] ] => limited...
45648593 bids are invited for 3 axis spatial filter and others 3 axis spatial filter , adjustable mechanical slits , half wave plate mounted , non polarizing cubic beam splitter un mounted , non polarizing cubic beam splitter mounted 50 50 , polarizer , micro lens arrays mounted , q plate zero order vortex half wave retarders m 1 , he ne laser , mounted biconvex lens 3 axis spatial filter, adjustable mechanical slits, half wave plate (mounted), non polarizing cubic beam splitter (un mounted) , non polarizing cubic beam splitter (mounted) 50:50, polarizer, micro lens arrays (mounted) , q platezero order vortex half wave retarders: m = , he ne laser, mounted biconvex lens searched string: 3 axis spatial filter filtering half mask air pollution mask is 9473, enamel, synthetic, exterior (a) under coating (b) finishing paint (v3) confirming to is 2932, digital physiograph system, oil filter cartridges, drip irrigation unit searched string: adjustable mechanical slits adjustable spanner, revolving chair (v4), adjustable monitor mount with adjustable keyboard workstation, adjustable tree looper, revolving chair (v3), height adjustable table, icu bed, duel adjustable pulley, surgical isolation or surgical masks, insulated adjustable wrench searched string: half wave plate (mounted) lighting box (flasher for police vehicles), d and c set, name plates or tags, alloy steel plate, basketball ring, smith machine (version 2) 1 13searched string: non polarizing cubic beam splitter (un total quantity : 15...
45618987 bids are invited for ss plate 6 mm for ntpc barh , ss plate 10 mm for ntpc barh , ss plate 15 mm for ntpc barh ss plate 15 mm forged fish plate is1570, copper alloy fancy taps for bathroom as per is 8931 (latest), 3.5mm reconstruction plate with corresponding screws, taps or valves of nonferrous metals, 4.5mm narrow d.c. plate with corresponding screws, sofa set (steel tube), 4.5mm l buttress plate with corresponding screws, chapati plate with puffer (v2), 4.5mm broad d.c. plate with corresponding screws, cast copper alloy screw down bib taps and stop valves for water services as per is 781 relevant steel tubes alloy steel plate total quantity : 25045...
45584901 bids are invited for hand tools slugging spanners 36mm , 100240163_200 t2250145155_screw driver set 8 pcs , 100240163_210 t2270020506_wrench adjustable 12in , 100240163_220 t2270061204_pipe wrench size 18 , 100240163_230 t2270060803_pipe wrench size 12 , 100240163_240 t2240662008_is 3650 side cutting plier insultd 200mm , 100240163_250 m2240920090_plier flat nose alloy steel 6 , 100240163_260 t2240251503_nose plier insulated 6 , 100240163_270 t2220150221_hammer ball peen 500gm , 100240163_280 m2220500924_hammer cu is9064 1 81 2kg , 100240163_290 t2220200428_hammers is 841sledge hammer 0 81 1 00kg , 100240163_300 t2276100877_chisel flat l 150 cutting edge 20mm , 100240163_310 t2276111161_chisels is 402 cold flat l x w 200x20mm , 100240163_320 t2276120796_cold chisel drop cross size10 150mm , 100240163_330 m2276106432_chisel flat 18 25mm , 100240163_340 m2273701389_allen key set 1 27mm , 100240163_350 m2273701388_allen key set 1 16 3 8mm , 100240163_360 m2279487002_1 2sq hex socket set , 100240163_370 m2240920092_ext circlip plier straight nose 7 inch , 100240163_380 m2240920091_int circlip plier straight nose 7 inch 2 36 total quantity : 201...
45547948 bids are invited for 1 m3101152578 100241889 mech seal,bfp 210mw,body:ms,seal:carbon puf seal, metal beds (v2), oil seal, wrought carbon steel and alloy steel pipe fitting for moderate and high temperature service, bolt bullet seal, trolleys or accessories, plastic grip seal, portable fire extinguishers (v2) as per is 15683:2018, d seal (rubber), dental cold mould seal relevant puf seal oil seal total quantity : 6...
45529041 bids are invited for sche. no. 1 100246433_10_m0141200310_sheet,ss,aisi304,3.15mm , sche. no. 2 100246433_ 20_m0141200408_sheet,ss,aisi304,4mm , sche. no. 3 100246433_ 30 _m0141200602_sheet,ss,aisi304,6mm , sche. no. 4 100246433_ 40_m0141200806_sheet,ss,aisi304,8mm , sche. no. 5 100246433_ 50_m0141201003_sheet,ss,aisi304,10mm , sche. no. 6 100246433_ 60_m0141201207_sheet,ss,aisi304,12mm , sche. no. 7 100245768_ 10 _m0141200806_sheet,ss,aisi304,8mm stainless steel sheet stainless steel pole mounted stainless steel dustbin, almirah steel (v2), stainless steel hose, fire hose cabinet, mild steel sheet, steel tables as per is 8126, stainless steel bucket (defence), non pressure stoves is:2980, duplex stainless steel pipes, steel bookcases as per is 7761 alloy steel plate relevant carbon steel plate (bhel) mild steel sheet total quantity : 24000...
45509861 bids are invited for cp bib cock long body with flange 15 mm fancy type isi marked cp bib cock long nose with flange 15 mm fancy type long body isi marked cp stop cock 15mm male thread isi marked cp brass concealed stop cock 15 mm with flange isi marked cp stop cock 15mm female thread isi marked cp angle cock 15 mm with flange isi marked cp angle cock two way 15mm with flange as per is 8931 abs hand shower multi flow 100 x 230mm with 1.5 mtr ss tube and abs hook abs overhead shower 125mm dia cp brass health faucet with ss pipe 1.0 mtr and abs hook cp jet spray cp wall mixer with l bend for overhead shower 15mm isi marked cp wall mixer telephonic with crutch with provn for hand shower 15mm isi marked central hole cp basin mixer without pop up cp pillar cock swan neck t or m 15 mm fancy type isi marked wall mounted cp sink mixer with regular spout 15 mm brass cp towel rail glossy finish round 600 mm long pvc ball cocks high pressure with epoxy coated alumn rod with hd ball 20 mm complete pvc ball cocks high pressure with epoxy coated alumn rod with hd ball 25 mm complete looking mirror 600 x 450 x6 mm with frame glass shelves 500 x 60 mm ply wood 6ft x 3ft x 12 mm bwr gde as per is 303 pvc flushing cistern low level of 10 ltr capacity isi marked collapsible pvc waste pipe 32mm for whb basin 950mm long brass cp soap dish fancy type glossy finish collapsible pvc waste pipe 40mm for urinal 800mm long cp ss waste coupling light half threaded 32 mm dia brass cp waste coupling heavy full threaded 40 mm dia brass cp waste coupling heavy full threaded 50 mm dia cp waste coupling 100 mm dia for stainless steel sink plastic seat cover for ewc colour white plate rack stainless steel grade 204 of size 786mm height 914mm width 254mm depth and 0.85mm ss grating round slotted doom type 102 mm dia aisi 304 ss grating round slotted doom type 102 mm dia aisi 304 with waste hole plate rack stainless steel grade 204 of size 786mm height 760mm width 254mm depth and 0.85mm pvc brauded connection 15 x 300mm long with ptmt nut collar bush and spanner pvc brauded connection 15 x 375mm long with ptmt nut collar bush and spanner pvc brauded connection 15 x 450mm long with ptmt nut collar bush and spanner pvc brauded connection 15 x 600mm long with ptmt nut collar bush and spanner white portland cement a grade 1.0 kg decorative quality multi purpose ss bracket foldable multipurpose for ss sink brass sliding bolt 300 mm with 16mm bolt complete brass sliding bolt 250 mm with 16mm bolt complete wire mesh 0.47 mm aperture of width 1200 mm length 8.20mtr aluminum door handle d type 100 mm isi marked aluminum door handle d type 125 mm isi marked aluminum door handle d type 150 mm isi marked aluminium alloy extruded section curtain rails of size 25mm and 12ft long as per is 10342 1982 curtain rod aluminum 20mm aluminium single diamond brackets curtain holder with ss support 1 inch curtains rod pocket finials designer pack of 1 pair cp hydraulic door closer cast iron body designation no 2 universal type suitable for door shutters of 701 to 850mm in width and weight between 36 to 60 kg ms butt hinges medium grade 100 mm as per is 1341 1992 aluminium barrel tower bolts with barrel and bolt of almn extruded section of 150mm length aluminium skeleton tower bolts with plate staples and bolt of extruded sections of aluminium alloy of size 150mm ms sliding door 250mm with bolt type and complying to is 281 1991 ms sliding door 200mm with bolt type and complying to is 281 1991 ms sliding door 300mm with bolt type and complying to is 281 1991 sliding door bolt aluminum 300mm with fixing bolts complete complying to is 281 1991 floor door stopper brass 125mm confirming to is 1823 1980 bracket cp for curtain rod 19 mm floor door stopper aluminum of 125mm confirming to is 1823 1980 aluminum tower bolt 200mm confirming to is 204 part 2 1992 aluminum tower bolt 100mm confirming to is 204 part 2 1992 ms bow handle stove enamelled black 125mm conform to is 208 1996 curtain rod stainless steel with brackets 20mm hack saw blade double edge 300 mm hasp and staple aluminum alloy safety type 100 mm conform to is 363 1993 hasp and staple aluminum alloy safety type 50 mm conform to is 363 1994 oil putty for fixing of window glass nails wire polished round 25mm size nails wire polished round 35mm size nails wire polished round 50mm size nails wire polished round 80mm size teak wood beading 4 mm thick x 20 mm half round mild steel 45 x 5 mm standard wood screws drum polish pkt of 200 pieces mild steel 45 x 5 mm standard wood screws drum polish pkt of 200 pieces mild steel 75 x 7 mm standard wood screws drum polish pkt of 200 pieces heavy duty padlocks dark grey with 8 keys 100mm hardened solid steel monoblock lock anti drill and anti saw and weighing not less than 850g gi steel tubing medium gde of 15 mm dia with one socket gi steel tubing medium gde of 20 mm dia with one socket gi steel tubing medium gde of 25 mm dia with one socket gi nipple 15 x 100mm gi nipple 15 x 300 mm gi nipple 15x75mm isi marked gi nipple threaded 15 x 25mm isi marked gi barrel nipple 20x80 mmthreaded isi marked gi bend 90 degree 15 mm dia isi marked cp brass tee 90 degree of 15mm m seal phataphat small packet of 25 gram gi union socket 15 mm isi marked gi union socket 20 mm isi marked gi socket fully threaded 15 mm isi marked gi socket fully threaded 25 mm isi marked gi socket fully threaded 32 mm isi marked gi socket 50 mm gi bend semicircle 15x100 mm isi marked gi bend semicircle 20x100 mm isi marked gi socket reducer 20 x 15 mm gi socket reducer 25x15 mm gi socket reducer 25 x 20 mm gi elbow reducer 32x20 mm isi marked gi tee equal 15mm isi marked gi reducer elbow of size 20 x 15 mm isi marked gi bend metal threaded 90 degree 80 mm dia nut and bolt with washer 6mm dia 50mm long gi tee reducer 50x15 mm x 50 mm isi marked gi socket reducer 50 x 20 mm isi marked gi nipple 20mm galvanized iron pipe nipple gi threaded round union socket polished 50 mm dia gi union socket 3mm thick of 25mm isi marked gi union socket 3mm thick of 15mm isi marked gi tee 3mm thick of 25mm isi marked pvc angle l type polished beading of size 2x10mm x 8ft long pvc angle l type polished beading of size 3x8mm x 8ft long back for chair cb steel without arms back for chair cb steel with arms plain white viscose fabric of width 48 inches for clothing ms screw wood 30 mm mild steel 30 x 7 mm standard wood screws drum polish pkt of 100 pieces ms wood screws powder coated of size 20x 5mm pkt of 200 pieces crome polish wood screw of size 35x8mm pkt of 100 pieces min nails wire polished round 40mm size nails wire polished 3mm round 75mm size synthetic enamel paint briliant white glossy finish in 4 ltr pack container cloth acrylic linen basics homes velvet solid dyed fabric decorative soft smooth silky cloth for sofa 100 x 140 cm beige 1 mtr white square padlock alloy steel with 4 keys 6 levers door lock hacksaw resistant electroplated hardened steel 50mm pack of 1 cylinder housing brass lock 25mm dia bright nickel finish for wardrobe with 2 keys made of brass with 1 yr warranty sliding door lock with key for wardrobe 32 mm nickle silver finish pack of 1 painting brush synth hair flat mini size 12mm paint brush with acrylic nylon blend round bristles of size 25mm pack of 6 paint brush with acrylic nylon blend round bristles of size 50mm pack of 4 super sturdy bristles premium brushes and wooden handle easy clean long lasting painting brush set of 6 black total quantity : 3661...
45104719 supply of mechanical track jackmechanical track jack,mechanical track jack simplex lever operation type, double acting 15 ton capacity with operating r atchet type with operating lever should be double acting trip low ring with following spe 1 foot lift 70mm, cap 15 to n, on toe 7 5, on head 15 ton, closed height min 558 mm, lift min 300 mm, base size 280x160mm, head size 75 x75 mm, pitch 15 mm, toe size 50 mm, weight approx 32 to 35 kg. jack should be of cast steel body, socket l ever with alloy steel, heat treated poule forge steel necks with raised teeth, heat treated fulcrum pin easy & comp act for convenient handling & transporting [ warranty period: 30 months after the date of delivery ] ]...
44921724 supply of axial stiffener plate auxiliary (middle)axial stiffener plate auxiliary (middle),axial stiffener plate auxiliary (middle) as per fasl drawing no fasl/0858 for high tensile tight l ock centre buffer coupler of lhb coaches and confirming to rdso specification no rdso/2011/cg 03 rev. 01. (pac item), make: frontier alloy steel ltd kanpur. [ warranty period: 30 months after the date of delivery ] ]...
44613850 supply of hd drop forged hardend temtinghd drop forged hardend temting,hd drop forged hardend temting and digging alloy steel reveting tool is 1836, angle 120, riveting t ool size 22 mm. [ warranty period: 30 months after the date of delivery ] ] => limited...
44589911 bids are invited for fastener, stud with 2 nuts base material: alloy steel material specification: astm a193/a194 grade: b7m / 2hm thread standard: metric coarse thread process / finish: natural nominal x length size mm x mm total quantity : 33050...
44499239 supply of grade 80 alloy steel endless chain, and chain size 20 mm dia. x 4meters effective length, 8meters circumferential length s.w.l. 12.5 mtgrade 80 alloy steel endless chain, and chain size 20 mm dia. x 4meters effective length, 8meters circumferential length s.w.l. 12.5 mt,grade 80 alloy steel endless chain, and chain size 20 mm dia. x 4meters effective length, 8meters circumferential length s.w.l. 12.5 mt [ warranty period: 30 months after the date of delivery ] ]...
44451459 supply of socket head cap screw with high grade alloy steelsocket head cap screw with high grade alloy steel,socket head cap screw with high grade alloy steel, half threaded, size m12x80 mm length part n o. 103100 generally confirming to is 2269, property class 12.9 as per is 1367 with hex nut size m12 part no. 17 0622 grade 10 with 01 no. plain washer and 01 no. spring washer size m12, make lps/tvs/unbrako only. [ warranty period: 12 months after the date of delivery ] ] sse/mech/ maintenance bihar 500.00 set , socket head cap screw with high grade alloy steel, half threaded, size m12x100 mm length part no. 122142 generally confirming to is 2269, property class 12.9 as per is 1367 with hex nut size m 12 part no. 1 70622 grade 10 with 01 no. plain washer and 01 no. spring washer size m12, make lps/tvs/unbrako only. [ warranty period: 12 months after the date of delivery ] ] sse/mech/ maintenance bihar 500.00 set...
43953843 supply of chain pulley block 10 tonne capacity x 3 mtrs. lift isi marked with grade 80 alloy steel load chain make brand kepro or powerpull bemco.chain pulley block 10 tonne capacity x 3 mtrs. lift isi marked with grade 80 alloy steel load chain make brand kepro or powerpull bemco.,chain pulley block 10 tonne capacity x 3 mtrs. lift isi marked with grade 80 alloy steel load chain make brand kepro or powerpull bemco. [ warranty period: 30 months after the date of delivery ] => limited...
43789043 procurement of pump spares , list of item(s) / work(s) as per tender documents , mech.seal,fsl,ptocart , mech.seal,fsl,rott , mech.seal,fsl,pbd,cart , hex, bolt,pn 40.4 , gsaket,pn 13 , gasket pn 13.1 , screw, set,pn 57 , cap screw,a4 80,p/no 40.2 , cap screw,18 8 ss,p/no 40.4 , set screw,alloy steel,p/no 57.2 , split ring,ss 316,p/no 94 , snap ring,uns no7718,p/no 111 , snap ring,ss 316,p/no 111.1 , snap ring,ss 304,p/no 111.2 , retaining ring,ss 316,p/no 54 , setting plate,ss 316,p/no 103 , retainer,ss 316,p/no 142 , flange bush, carbon,p/no 24 , adjusting collar,ss 316,p/no 129 , gasket, grafoil, p/no 13 , gasket, grafoil, p/no 13.1 , gasket, grafoil, p/no 19 , gasket,grafoil,p/no 152 , gasket,grafoil,p/no 152.1 , lock pin, ss 316,p/no 5 , cap screw,silver plated, p/no 40 , cap screw,silver plated,p/no 40.1 , cap screw, a4 80,p/no 40.2 , cap screw, 18 8 ss,p/no 40.3 , cap screw,18 8 ss,p/no 40.4 , set screw, ss 316,p/no 57 , set screw, ss 316,p/no 57.1 , set screw, alloy steel,p/no 57.2 , pumping screw,bronze,p/no 90 , pumping screw,bronze,p/no 90.1 , shaft sleeve, ss 316,p/no 1 , cap screw,18 8 ss,p/no. 40 , retaining ring,ss 316,p/no. 54 , retaining ring,ss 316,p/no. 54.1 , gasket,viton,p/no. 76 , cap screw,18 8 ss,p/no. 40 , pumping screw,bronze, p/no. 90 , pumping screw,bronze, p/no. 90.1 , shaft sleeve,ss 316;p/no 1 , flange bushing,carbon,p/no. 24 , drive collar,ss 316,p/no. 58 , gasket, viton , p.no. 13 , gasket, viton , p.no. 13.1 , gasket, viton , p.no. 18 , gasket, viton , p.no. 19 , gasket , viton , p.no. 71 , gasket ,viton , p.no. 76 , hex.hd bolt p/n 40.4,a4 80 , bellow sub assy p/n 79,inconel 718 , gasket pn 13 , gasket pn 19 , gasket pn 76 , gland gasket pn g , insert pn 2 silcar 1 , insert mounting pn 6 viton , rot face pn 15 , seal ring pn 3 , sleeve pn 10 , sleeve packing pn 10a , shaft packing out pn p , set screw pn 57...
43597921 procurement of flowserve make seal spares , list of item(s) / work(s) as per tender documents , collar pn 5 , lock pin pn 5.1 , gland ring pn 11 , coil sprin pn 16 , spring holder pn 17 , retaining ring pn 54 , set screw pn 57 , snap ring pn 111 , inner ring pn 142 , spring pn c , centring tab pn ct , drive pin pn d , drive pin pn d1 , gland gasket pn g , cap screw pn k , set screw pn s1 , set screw pn s , inner ring, pn 140 , setting plate, pn 103 , hex, bolt,pn 40.4 , gsaket,pn 13 , screw, set,pn 57 , flange, pn 11 , flange, pn 11.1 , pin; p/n 5; code 4r9695db , complete cart. seal,drg no.2h 100980 , spring holder,ss 316,p/no. 17 , spring holder,ss 316,p/no. 17.1 , adapter,ss 316,p/no. 172 , flange,ss 316,p/no 11.1 , flange bushing,carbon,p/no. 24 , plug (1/2 npt),ss 316,p/no. , lock ring, ss 316, p/no. 124 , setting plate, ss 316,p/no. 103 , drive pin, ss316 , p/no 3 , cap screw,a276 siver plated ,p/no 40 , cap screw, a276 siver plated, p/no. 40.1 , hex.head bolt, alloy steel, p/no 40.3 , set screw, alloy steel,p/no 57 , flange, ss316, p/no 11 , plug (1/2 npt),ss 316, p/no , complete cart seal drg 2h 113605 , hex.hd.bolt p/n 40.1 , hex.hd.bolt p/n 40.2 , set screw p/n 57 , set screw p/n 57.1 , cap screw p/n 40 , coil spring p/n 16 , spring holder p/n 17 , spring holder p/n 17.1 , adapter p/n 172 , auxliary gland p/n 8 , flange p/n 11.1 , soc.hd.plug 2h 113605 drg no.2h 113605 , lock pin p/n 5 , set screw p/n 57.2 , coil spring p/n 16.1 , coil spring p/n 16.2 , comp. seal cart., 2h 136028, fsl , inner ring,u/n:10366100h2750,p/n:140 , snap ring,u/n:us281bh,p/n:111 , gland,u/n:128152bxr2750,p/n:11 , gland,u/n:128078bxr2750,p/n:11.1 , setting plate,u/n:4n07043bx,p/n:103, , bolt,hex.hd,u/n:4n02099bx , bellowassy.,u/n:3r23043rh,p/n:79 , bellow, sub,assy,u/n:3r23043bh,p/n:79.1 , drive,collar,u/n:3n12142bx,p/n:58 , gasket,grafoil,u/n:4r0833gf,p/n:13 , gasket,gland,u/n:oswbx5312#r2,p/n:18 , gasket,sleeve,u/n:4n12268bx,p/n:19 , gasket, rot. face,u/n:4r9598bx,p/n:76 , sleeve,u/n:133350bxr2750,p/n:1 , split ring,u/n:4n12739bx,p/n:94 , lock pin,u/n:4r9798db,p/n:5 , bolt,hex.hd,u/n:4n02083b409 , collar, adj.,u/n:4n12740bx,p/n:129 , rotary face,sic,u/n:3r11401bx , set screw,u/n:4n01859bx,p/n:57 , cap,screw, u/n:4r2655bx , cap,screw,u/n:ocapc0375#x4 , complete cart. seal,drg no.2h 102169 , gasket,u/n:680229sp...
43417046 supply of high grade alloy steel four leghigh grade alloy steel four leg,high grade alloy steel four leg grade 80 chain sling type fls, 20ton capacity swl as per followin g specification to is:2760:1980 (i) alloy steel oblong ring at top (ii)alloy steel lifting eye hook 11 ton capacity at en d of each leg (iii) alloy steel chain dia 20mm x grade 80 alloy steel (iv) length excluding top ring 6 mtrs of each le g (v)swl 20ton tested to 40 ton with test certificate from govt approved test house. make: indian.,superlift or si milar [ warranty period: 30 months after the date of delivery ] => limited...
43331393 supply of chain pulley block 10 tonne capacity x 3 mtrs. lift isi marked with grade 80 alloy steel load chain make brand kepro or powerpull bemco. [ warranty period: 30 months after the date of delivery ] => limited...
43294144 supply of socket head cap screw m8 x 50 mmsocket head cap screw m8 x 50 mm, socket head cap screw m8 x 50 mm, is:2269 2006 ( reaffirmed year : 2021 ) , din 912, iso:476 2, thread to is:4218 1976, material high grade alloy steel finish blackened & coated with rust preventive oil. property class 12.9 as per is:1367 part iii. make : unbrako / tvs / lps only. [ warranty period: 30 month s after the date of delivery ] ...
43242159 supply of circular lifting magnet.circular lifting magnet., circular lifting magnet for lifting cold as well as hot material up to 600deg c in foundry environment . deep field coil design, copper wound for 220v dc operation, must include 03 leg chain and bail assembly, ext ernal electrical connectors and surge suppressor, heavy duty cast magnet designed for severe scrap handling d uty similar to ohio make model 66dcwx, confirming to the following specification for single magnet characteri stics 1. cold current 105 amps max. 2. cold power 18.5 kw 3. self weight should not be more than 5ton in clusive of chain, bail and other accessories 4. duty cycle: min. 50%, 24 hrs. / day 7 days / week, to allow extra ha ndling time of hot materials at 10minutes lift cycle 5. diameter of magnet: 66inches 1 inch +3inch ( 1650mm 25. 5mm / +50mm ) 6. lifting capacities shall not be less than ( a ) pig iron: h m s 5200 lbs. ( 2359kgs ) ( b ) broken / cu t scrap: 2700 3300 lbs. ( 1225 1497kgs ) ( c ) steel turnings: 1700 lbs. ( 771kgs ) note: the tolerance in lifting c apacity must be + / 25% of the above mentioned ranges at all operating conditions. 7. magnet conductor shall be of premium electrical grade copper with 99.99% purity with class h insulation for maximum coil life under severe operation. 8. magnet shall be of high grade cast steel welded construction for strength and waterproof. 9. heavy duty, nonmagnetic bottom plate & sealing plate, made of wear resistant & work hardened manganese steel shall be used to protect the coil from damage caused by impact including bumping plate. 10. additional protection from moisture & impact is to be provided to the coil with the use of non magnetic manganese sealing plate.11. heavy duty, annealed alloy steel 3 legged chain with a master hook bail is to be provided.12. suspension lugs should be heavy duty & pins shall be provided to connect the chain to the magnet. 13. suitable rating surge suppresser ( me tro cell ) shall be introduced in the magnet. 14. electrical connectors: plug in type connectors made from a size of 25 sq. mm 2 conductor type w magnet cable, 2000v dc rated for durability and ease of replacement. 15. e xternal connectors to be clamped and protected with a shield. 16. 08 hrs. heat rise to be performed to verify mag net integrity. temperature rise test, high voltage test and insulation resistance test should be performed and reco rded for traceability and future reference. note: 1. magnet must be same or similar in all respects to the 66 inch ( 1676 mm ) dcwx model, ohio make magnets. 2. all relevant tests and test certificates shall be submitted alon g with the supply. 3. the manufacturer shall carry out continuous load test. 4. warranty: 24 month from the date of commissioning and proving out of m&p. 5. stage inspection by tpi before closing the magnet and inspection r eport to be submitted by the firm to rwp / bela with the supply. 6. tenderer shall indicate the service support avail ability. stage inspection by tpi before closing the magnet ( as 100% of po qty. ) [ warranty period: 24 months after the date of delivery ] ...
43218867 supply of come along clamps for earth wire ( 19 / 2.5 mm ) galvanized steel with load test certificate from govt. approved lab, similar to design as per drg no. re / 33 / p / 560. ( make im, sste or similar ) . [ warranty period: 30 months after the date of delivery ] , automatic come along clamp 3.5t capacity, suitable for 6mm to 22mm wire ropes / earth wire. ba re copper cable, trolley wire etc., self gripping type made of forged alloy steel parts, as per the specification atta ched make hi tool, japan or similar. [ warranty period: 30 months after the date of delivery ] , come along clamps for aluminium spider conductor ( 20 sq mm ) as per drg. no.re / 33 / p / 550 ( m ake: im, sste or similar ) [ warranty period: 30 months after the date of delivery ] => limited...
43202437 supply of d shackle,d shackle,,heavy duty d shackle, specification as following : (1). heavy duty d shackle alloy steel grade 8 0, capacity 5 ton, qty 10 nos, (2). heavy duty d shackle alloy steel grade 80, capacity 6.5 ton, qty 10 nos., (3). heavy duty d shackle alloy steel grade 80, capacity 8.5 ton, qty 10 nos. make ce or similar [ warrant y period: 12 months after the date of delivery ] sse/mech/maintenance/ bihar 1.00 set => limited...
43096614 supply of axhc301 flanges ( low alloy steel ) and axhg004 figure 8 blanks, spacers and blanks , supply of axhc301 flanges ( low alloy steel ) , flange wn with jb a182gr.f11cl.2 cl.600 rf asme b16.5 ibr, 14 in, 15.88mm , flange wn with jb a182gr.f11cl.2 cl.600 rf asme b16.5 ibr, 10 in, 12.70mm , supply of axhg004 figure 8 blanks, spacers & blanks , figure 8 flange a105 cl.150 ff asme b16.48, 0.75 in , figure 8 flange a105 cl.150 ff asme b16.48, 1 in , figure 8 flange a105 cl.150 ff asme b16.48, 2 in , figure 8 flange a105 cl.150 ff asme b16.48, 3 in , figure 8 flange a105 cl.150 ff asme b16.48, 4 in , figure 8 flange a105 cl.150 ff asme b16.48, 6 in , figure 8 flange a105 cl.150 ff asme b16.48, 8 in , figure 8 flange a105 cl.150 ff asme b16.48 hic nace hydrogen, 8 in , figure 8 flange a105 cl.150 ff asme b16.48 ibr, 1 in , figure 8 flange a105 cl.150 ff asme b16.48 ibr, 2 in , figure 8 flange a105 cl.150 ff asme b16.48 ibr, 3 in , figure 8 flange a105 cl.150 ff asme b16.48 ibr, 6 in , figure 8 flange a105 cl.150 ff asme b16.48 ibr, 8 in , figure 8 flange a105 cl.300 ff asme b16.48, 0.75 in , figure 8 flange a105 cl.300 ff asme b16.48, 1.5 in , figure 8 flange a105 cl.300 ff asme b16.48, 2 in , figure 8 flange a105 cl.300 ff asme b16.48, 3 in , figure 8 flange a105 cl.300 ff asme b16.48, 4 in , figure 8 flange a105 cl.300 ff asme b16.48, 6 in , figure 8 flange a105 cl.300 ff asme b16.48, 8 in , figure 8 flange a105 cl.300 ff asme b16.48 hic nace, 0.75 in , figure 8 flange a105 cl.300 ff asme b16.48 hic nace, 4 in , figure 8 flange a105 cl.300 ff asme b16.48 nace, 2 in , figure 8 flange a105 cl.300 ff asme b16.48 nace, 8 in , figure 8 flange a105 cl.300 ff asme b16.48 ibr, 0.75 in , figure 8 flange a105 cl.300 ff asme b16.48 ibr, 2 in , figure 8 flange a105 cl.300 ff asme b16.48 ibr, 3 in , figure 8 flange a105 cl.300 ff asme b16.48 ibr, 4 in , figure 8 flange a105 cl.300 ff asme b16.48 ibr, 8 in , figure 8 flange a105 cl.300 ff asme b16.48 hydrogen, 4 in , figure 8 flange a105 / galv. cl.150 ff asme b16.48, 1 in , figure 8 flange a105 / galv. cl.150 ff asme b16.48, 1.5 in , spacer & blanks a105 cl.150 ff asme b16.48, 10 in , spacer & blanks a105 cl.150 ff asme b16.48, 12 in , spacer & blanks a105 cl.150 ff asme b16.48, 16 in , spacer & blanks a105 cl.150 ff asme b16.48, 18 in , spacer & blanks a105 cl.150 ff asme b16.48, 20 in , spacer & blanks a105 cl.150 ff asme b16.48, 24 in , spacer & blanks a105 cl.150 ff a3.6373.3, 30 in , spacer & blanks a105 cl.300 ff asme b16.48, 10 in , spacer & blanks a105 cl.300 ff asme b16.48, 12 in , spacer & blanks a105 cl.300 ff asme b16.48, 14 in , spacer & blanks a105 cl.300 ff asme b16.48, 16 in , spacer & blanks a105 cl.300 ff asme b16.48, 20 in , figure 8 flange a105 cl.150 ff asme b16.48 hic nace hydrogen, 3 in , figure 8 flange a105 cl.150 ff asme b16.48 hydrogen, 2 in , figure 8 flange a105 cl.150 ff asme b16.48 hic nace, 4 in , figure 8 flange a105 cl.150 ff asme b16.48 hic nace, 6 in , figure 8 flange a105 cl.150 ff asme b16.48 hic nace, 8 in , figure 8 flange a105 cl.150 ff asme b16.48 nace, 6 in , figure 8 flange a105 cl.150 ff asme b16.48 ibr, 4 in , figure 8 flange a105 cl.300 ff asme b16.48 hic nace, 2 in , figure 8 flange a105 cl.300 ff asme b16.48 nace, 3 in , figure 8 flange a105 cl.300 ff asme b16.48 nace, 4 in , figure 8 flange a105 cl.300 ff asme b16.48 hydrogen, 3 in , figure 8 flange a105 cl.300 ff asme b16.48 hydrogen, 8 in , figure 8 flange a105 / galv. cl.150 ff asme b16.48, 4 in , figure 8 flange a105 / galv. cl.150 ff asme b16.48, 6 in , spacer & blanks a105 cl.150 ff asme b16.48, 14 in , spacer & blanks a105 cl.150 ff a3.6373.3, 28 in , spacer & blanks a105 cl.150 ff a3.6373.3, 40 in , spacer & blanks a105 cl.150 ff a3.6373.3, 76 in , spacer & blanks a105 cl.150 ff ibr a3.6373.3, 28 in , spacer & blanks a105 cl.300 ff asme b16.48 hic nace, 12 in , spacer & blanks a105 cl.300 ff asme b16.48 ibr, 10 in , spacer & blanks a105 cl.300 ff a3.6373.3, 26 in , figure 8 flange a350gr.lf2cl.1 cl.150 ff asme b16.48, 2 in , spacer & blanks a350gr.lf2cl.1 cl.300 ff asme b16.48, 10 in , figure 8 flange a350gr.lf2cl.1 cl.150 ff asme b16.48 hic nace, 3 in , figure 8 flange a350gr.lf2cl.1 cl.300 ff asme b16.48, 4 in , figure 8 flange a350gr.lf2cl.1 cl.300 ff asme b16.48, 6 in , figure 8 flange a350gr.lf2cl.1 cl.300 ff asme b16.48, 8 in , figure 8 flange a182gr.f304 cl.150 ff asme b16.48, 4 in , figure 8 flange a182gr.f304 cl.300 ff asme b16.48, 6 in , figure 8 flange a182gr.f304 cl.150 ff asme b16.48, 8 in , spacer & blanks a182gr.f304 cl.150 ff asme b16.48, 10 in => limited...
43071913 procurement of psvs spares at iocl, barauni refinery. procurement of psvspares at iocl, barauni refinery. , list of item(s) / work(s) as per tender documents , base,p/n:121389 123 , nozzle,p/n:103169 124 , inconel x750 spring p/n: x07582 , gasket set,part no 108304 e 10 , spring,part no: x07574 , disc holder , p/n: 150556 , nozzle rt crby std,p/n:118541 r , nozzle igc tst/a262 prctice b 103186 123 , spring, p/n x36265 a , disc,ss316,psv,p/n:121391 igc , gasket set, p/n: 108308 e 10 , gasket set, p/n: 108313 b 1m , nozzle, p/n 0p4103 , spr,washer,chrome steel,psv,p/n:x36060a , spr,washer,chrome steel,psv,p/n:x36021a , spr,washer,chrome steel,psv,p/n:x36084a , disc insert, p/n 151011+147602 , liner;6 in type 23/24 p/n: 02.5633.005 , screwed mnpt metal seat p/n,121389 r , spl asy f/relf 3x6in,600x150 ibr , spring x36077a, tyco , disc assy, 143826 v 75, 702 psv 06 , spring, p/n x36213, 702 psv 06 , nozzle f/srv,p/n 107144 r , gasket set,soft ss316,p/n 108311 b 10 , gasket,2h3,300,p/n 108306 b 10 , gasket,4n6,150,p/n 108314 b 10 , gasket set, 108312 e 10, f/ jbs 36 e spl , chrom stl sprng;lloyds endrs p/n:x36054a , spring p/n:x36059a , spring domep/n:02.5854.007 , gasket set; 4 l 6 jos e 35 s j spl , disc insert with retention clip, 122566 , 17 7 phss spring with washers, x09820 , disc insert with reten clip, 136978 igc , disc hold,1.5 d 2jbs e 57 j spl,147551 , alloy steel spring with washers, x07523 , sprg w/washer,102800,x36146,tyco sanmar , ss316 spring with washer, x07090 , spring p/nx02369a , disc p/n144978 22e , guide ring, p/n 108970 , nozzle ring, p/n 108965 , spring alloy steel p/n x06590 , nozzle stellited: p/n 114433 124 , nozzle; p/n 102875 115 , spring alloy steel p/nx06774 , nozzle; cf8m i r igc(b) p/n 102778 115 , nozzle; cf8m i r igc p/n 103185 115 , nozzle; sa351 grcf8m i p/n 102853 115 , spring,crome steel,part no.x36202...
43002028 supply of stiffener plate auxiliary (middle)stiffener plate auxiliary (middle),axial stiffener plate auxiliary (middle) as per fasl drawing no fasl/0858 for high tensile tight l ock centre buffer coupler of lhb coaches and confirming to rdso specification no rdso/2011/cg 03 rev. 01. (pac item), make: frontier alloy steel ltd kanpur. [ warranty period: 30 months after the date of delivery ]...
42738927 supply of alloy steel turn buckle capacity 10 tonalloy steel turn buckle capacity 10 ton,alloy steel turn buckle capacity 10 ton, 3 meter chain both side of turn buckle for tightening of side wall and end wall. as per dimension (i)maximum length of turn buckle 1200mm (ii)minimum length of turn buckle 700mm (iii)alloy steel rod dia 24mm (iv)alloy steel screw dia 48mm (v)length of screw 500mm (vi)alloy steel chain dia 18mm and length 3mtr. [ warranty period: 30 months after the date of delivery ] => limited...
42661849 bids are invited for fitter toolkit steel rule with metric & british graduation try square. caliper hermaphrodite spring type divider spring type scriber centre punch screw driver chisel cold flat hammer ball peen with handle hammer ball peen with handle. file flat second cut file half round second cut hacksaw frame fixed type safety goggles. dot punch straight edge steel spirit level metal type 2 stud extractor ezy out micrometer outside. micrometer inside with extension rods. vernier bevel protractor blade with acute angle attachment screw pitch gauge metric wire gauge, metric standard. surface plate c.i / granite with stand and cover marking table ( mild steel ) universal scribing block. v block pair with clamps angle plate punch letter set. punch number set. portable hand drill ( electric ) drill twist taper shank file triangular smooth file round second cut feeler gauge file triangular second cut. file flat second cut safe edge. file swiss type needle file card. oil can pliers combination insulated wooden handle forged soldering iron copper bit. blow lamp spanner double ended spanner double ended spanner double ended spanner double ended spanner double ended spanner double ended spanner double ended spanner double ended interchangeable ratchet socket set double ended tubular box spanner set with tommy bar. glass magnifying clamp toolmaker hand reamer set ( taper pin straight flute ) machine reamer parallel ( helical flute ) scraper flat scraper triangular scraper half round chisel cold crosscut& diamond point. chisel cold round nose drill chuck with key pipe wrench pipe vice adjustable pipe die set bsp wheel dresser ( one for 4 units ) star / dresser with holder machine vice swivel base machine vice swivel base sleeve drill morse lockers with 8 drawers ( standard size ) . machine vice. wing compass. hand hammer with handle. torque wrench ( standard / ratchet type ) power tools for fastening different profile gauges ( plate type ) for demonstration knurling tool ( diamond, straight & diagonal ) indexable boring bar with inserts temperature gauge dowel pin ( straight ) standard tap screws lapping plate medium carbon heat treated alloy steel metric studs and bolts along with nuts ( for display ) of standard length ( may be manufactured in house ) caps screws drill gauges cast iron globe valve ( flanged type ) c.i. sluice / gate valve ( flanged type ) stop cock m.s. pipe g.i. pipe slip on forged steel flange bolt & nut with washer ( may be manufactured in house ) pipe threading die with handle jigs & fixture ( sample ) for demonstration ( may be manufactured in house ) pulleys ( for v belt or flat belt ) steel keys ( may be manufactured in house ) damaged old spur gear v belt and flat belt packing gasket washer, clutch, keys, jib, cotter &circlip hollow punch drill drift ( may be manufactured in house ) bearing different types lifting sling bearing extractor pulley extractor trammel pocker prick punch mallet. aviation snips straight cut flat headed hammers with handle. planishing hammer. snip bent left cut stake hatchet with leg. stake grooving. slip gauge as johnson metric set. gauge snap go and not go gauge plug gauge telescopic set. dial test indicator on stand sine bar dial vernier caliper. ( universal type ) screw thread micrometer with interchangeable. pitch anvils for checking metric threads 60. depth micrometer. 0 25 mm digital vernier caliper. digital micrometer outside. comparators gauge dial indication with stand and bracket. engineers try square knife edge surface roughness comparison plates digital vernier caliper vernier bevel protector carbide wear block. lathe tools h.s.s. tipped set. lathe tools bit. lathe tools bit. lathe tools bit. arm strong type tool bit holder. arm strong type tool bit holder. arm strong type tool bit holder. stilson wrenches pipe bender machine spool type with stand manually operated. adjustable pipe chain tonge to take pipes adjustable spanner. compressor unit pneumatic trainer kit, each consisting of the following matching components and accessories i. single acting cylinder ii. double acting cylinder iii. 3 / 2 way valve iv. 3 / 2 way valve v. one way flow control valve vi. 5 / 2 way valve vii. 5 / 2 way valve viii. 5 / 2 way pneumatic actuated valve ix. 3 / 2 way roller lever valve x. shuttle valve ( or ) xi. two pressure valve ( and ) xii. pressure gauge xiii. manifold with self closing xiv. pushbutton station for electrical signal input xv. relay station xvi. 3 / 2 way single solenoid valve xvii. 5 / 2 way single solenoid valve xviii. 5 / 2 way double solenoid valve xix. power supply unit, xx. profile plate, anodised aluminium pneumatic workstation with 40 square mm aluminium profile legs, wooden work surface, and one pedestal drawer unit having 5 drawers, each with handles and individual locks, on metallic full panel drawer slide carrier for mounting components, such as pb & relay boxes. cut section model for pneumatic components hydraulic trainer kit, each consisting of the following matching components and accessories i. hydraulic power pack ii. pressure relief valve iii. drip tray, steel iv. pressure gauge v. four way distributor vi. double acting hydraulic cylinder vii. suitable weight viii. mounting kit for weight ix. 3 / 2 way directional control valve x. 4 / 2 way directional control valve xi. 4 / 3 way directional control valve xii. non return valve. xiii. pilot operated check valve xiv. one way flow control valve xv. t connector with self sealing coupling nipples ( 2 nos. ) and quick coupling socket ( 1 no. ) . xvi. profile plate, hydraulic workstation with 40 square mm aluminium profile legs, wooden work surface, and one pedestal drawer unit having 5 drawers, each with handles and individual locks, on metallic full panel drawer slide cut section models for hydraulic components total quantity : 818...
42577516 supply of hd drop forged hardend temting and digging alloy steel reveting toolhd drop forged hardend temting and digging alloy steel reveting tool,hd drop forged hardend temting and digging alloy steel reveting tool is 1836, angle 120, riveting tool size 12 mm. [ warranty period: 30 months after the date of delivery ] => limited...
42444211 supply of knuckle for high tensile aar h type tight lock cbc for bg lhb passenger coaches to m / s frontier alloy steel ltd. mat. spec: rdso / 2011 / cg 03 ( rev0​ 3 ) . [ warranty period: 84 months after the date of delivery ] ...
42225335 supply of circular lifting magnet.circular lifting magnet.,circular lifting magnet for lifting cold as well as hot material up to 600deg c in foundry environment. deep field coil design, copper wound for 220v dc operation, must include 03 leg chain and bail assembly, external electrical connectors and surge suppressor, heavy duty cast magnet designed for severe scrap handling duty similar to ohio make model 66dcwx, confirming to the following specification for single magnet characteristics 1. cold current 105 amps max. 2. cold power 18.5 kw 3. self weight should not be more than 5ton inclusive of chain, bail and other accessories 4. duty cycle: min. 50%, 24 hrs./ day 7 days/ week, to allow extra handling time of hot materials at 10minutes lift cycle 5. diameter of magnet: 66inches 1 inch +3inch (1650mm 25.5mm/+50mm) 6. lifting capacities shall not be less than (a) pig iron: h m s 5200 lbs. (2359kgs) (b) broken/cut scrap: 2700 3300 lbs. (1225 1497kgs) (c) steel turnings: 1700 lbs. (771kgs) note: the tolerance in lifting capacity must be +/ 25% of the above mentioned ranges at all operating conditions. 7. magnet conductor shall be of premium electrical grade copper with 99.99% purity with class h insulation for maximum coil life under severe operation. 8. magnet shall be of high grade cast steel welded construction for strength and waterproof. 9. heavy duty, nonmagnetic bottom plate & sealing plate, made of wear resistant & work hardened manganese steel shall be used to protect the coil from damage caused by impact including bumping plate. 10. additional protection from moisture & impact is to be provided to the coil with the use of non magnetic manganese sealing plate.11. heavy duty, annealed alloy steel 3 legged chain with a master hook bail is to be provided.12. suspension lugs should be heavy duty & pins shall be provided to connect the chain to the magnet. 13. suitable rating surge suppresser (metro cell) shall be introduced in the magnet. 14. electric...
42173830 bids are invited for boq purchase screwdriver insulated , heavy duty screwdriver insulated , electrician screwdriver thin stem insulated handle , punch centre , steel rule graduated both in metric and english unit , pincer , chisel cold , allen key alloy steel , grease gun , scissors blade, ss , crimping tool , wire cutter and stripper , hacksaw frame , try square , outside calliper , inside calliper , divider , pliers long nose insulated , pliers flat nose insulated , pliers round nose insulated , snip straight and bent screwdriver insulated , heavy duty screwdriver insulated , electrician screwdriver thin stem insulated handle , punch centre , steel rule graduated both in metric and english unit , pincer , chisel cold , allen key alloy steel , grease gun , scissors blade, ss , crimping tool , wire cutter and stripper , hacksaw frame , try square , outside calliper , inside calliper , divider , pliers long nose insulated , pliers flat nose insulated , pliers round nose insulated , snip straight and bent heavy duty , d.e. metric spanner double ended , drill hand brace , drill s.s. twist block , gauge wire imperial stainlees steel marked in swg and mm , file flat , file flat rough , file flat bastard , file flat smooth , copper bit soldering iron , hand vice , oil can , rotary switch , portable electric drill machine , hand drill machine , thermometer digital , miniature circuit breaker , electrician helmet , safety belt , digital wattmeter , a.c. energy meter , frequency meter , lux meter , tachometer , tong tester oblique clamp meter , oscilloscope dual trace , domestic appliances electric induction plate , domestic appliances electric kettle , domestic appliances electric iron , domestic appliances immersion heater , domestic appliances geyser storage type , domestic appliances mixture and grinder , domestic appliances motor pump set , dc power supply total quantity : 250...
41976688 supply of precision grade duly carbide brazed tipprecision grade duly carbide brazed tip,precision grade duly carbide brazed tip tool iso ir size 25x25x200mm ,tip size (a20, p30) with alloy steel conforming to crv steel for turning, facing and boring for coupling support pin compatibility . make super x, makita, millway, coroley or similar [ warranty period: 30 months after the date of delivery ] => limited...
41976626 supply of precision grade duly carbide brazed tipprecision grade duly carbide brazed tip,precision grade duly carbide brazed tip tool iso il size 25x25x200mm ,tip size (b20, p30) with alloy steel conforming to crv steel for turning, facing and boring for coupling support pin compatibility . make super x, makita, millway, coroley or similar [ warranty period: 30 months after the date of delivery ] => limited...
41791112 supply of coore cuters specially designed for railways from special alloy steel. ( size 28 x 50 mm ) model ep. [ warranty period: 30 months after the date of delivery ] , supply of coore cuters specially designed for railways from special alloy steel. ( size 26.5 x 50 mm ) model ep. [ warranty period: 30 months after the date of delivery ] , supply of special purpose gleisschneidemaschine this unit is equipped with power source i.e. 4 stroke single cylinder ohv petrol engine 25? inclined cylinder hs, net power 6.3 kw ( 8.4hp ) / 3600 rpm. for troubled free performance. [ warranty period: 30 months after the date of delivery ] => limited...
41661641 supply of alloy steel turn buckle capacity 10 tonalloy steel turn buckle capacity 10 ton,alloy steel turn buckle capacity 10 ton, 3 meter chain both side of turn buckle for tightening of side wall and end wall. as per dimension (i)maximum length of turn buckle 1200mm (ii)minimum length of turn buckle 700mm (iii)alloy steel rod dia 24mm (iv)alloy steel screw dia 48mm (v)length of screw 500mm (vi)alloy steel chain dia 18mm and length 3mtr. [ warranty period: 30 months after the date of delivery ] => limited...
41661560 supply of hd drop forged hardend temptinghd drop forged hardend tempting,hd drop forged hardend tempting and digging alloy steel reveting tool is 1836, angle 120, riveting tool size 16 mm. [ warranty period: 30 months after the date of delivery ] => limited...
41459191 supply of flowserve make seal spares at barauni refinery , list of item(s) / work(s) as per tender documents , rotary face,fsl,5a9x/5a9x , rotary face,fsl,5a9x/5a9x , face gskt,fsl,5a9x/5a9x , face gskt,fsl,5a9x/5a9x , flange gskt,flowserve, mfr 5a9x/5a9x , sleeve gskt,fsl,5a9x/5a9x , seal gskt,fsl,5a9x/5a9x , seat gasket,fsl,5a9x/5a9x , shaft sleeve,fsl,5a9x/5a9x , face),fsl,5a9x/5a9x , face,fsl,5a9x/5a9x , gskt, adapter,fsl,5a9x/5a9x , flange bushing,fsl,5a9x/5a9x , bellow assy,fsl,gxcq,position no :79 , rotary face assy,fsl,gxcq,position :15 , sleeve ,fsl,gxcq,position no :1 , shcs 10 32x5/8,fsl,gxcq,position : 40 , shcs 10 32x3/4,fsl,gxcq,position : 40 1 , rotary face assy,bxrh,pn 15,sic , mech.seal,fsl,pbd,cart , bellow with face assy,bxrhpn 79. , cap screw,18 8 ss,p/no 40.3 , gasket, p/n s 126 , seat gasket, p/n s 13 , cap screws, p/n s 40 , sleeve gasket, p/n s 19 , complete seal cartridge , snap ring,18 8 ss, p/no. 111 , bellows assy,p/no 79 , drive collar,ss316, p/no 58 , seat gasket,graf oil, p/no 13 , gasket, grafoil, p/no. 126 , gasket,gland,p/n 18 , flange bushing, p/no. 24 , pumping screw, ss 316, p/no. 90 , rotate faceassy,p/no 15 , anti coke device,bonze,p/no. 62 , gasket, sleeve,pn 19 , snap ring,ss 304,p/no 111.2 , spiral wound gskt, p/no 18 , set screw,ss 316,p/no. 57 , pumping screw,bronze,p/no. 90 , pumping screw,bronze, p/no. 90.1 , gasket p/n 13 , gasket p/n 19 , shaft sleeve p/n 1 , retaining ring p/n 54 , retaining ring p/n 54.1 , snap ring p/n 111 , pumping ring p/n 90 , setting plate r/n 103 , gasket p/n 13 , gasket p/n 13.1 , gasket p/n 18 , gasket p/n 18.1 , gasket p/n 19 , gasket p/n 71 , gasket p/n 76 , gasket p/n 76.1 , shaft sleeve p/n 1 , retainer p/n 142 , seal guard p/n sg1 , seal guard p/n sg2 , retainer p/n 142 , cap screw,silver plated,p/no 40 , cap screw,silver plated,p/no 40.1 , retainer, p/n : 142 , snap ring, p/n : 111 , snap ring, p/n: 111.1 , retaining ring,pn:44,bxhhs/bxhhs , split ring, p/n: 94 , setting plate, p/n : 103 , hex bolt,p/n :40.2,bxhhs/bxhhs , hex bolt,p/n :40.3,bxhhs/bxhhs , bellow assy.,p/n:79,bxhhs/bxhhs , bellow assy.,p/n:79.1,bxhhs/bxhhs , drive collar,p/n : 58 , adjusting collar, p/n: 129 , seal face (stator), p/n: 14 , seal face (stator), p/n: 14.1 , flange, p/n 11, type bxhhs/bxhhs , gasket, p/n 13, bxhhs/bxhhs , gasket, p/n 13.1, bxhhs/bxhhs , gasket,p/n: 18,bxhhs/bxhhs , gasket, p/n: 152 , gasket, p/n: 152.1 , pumping screw; pn 90 , set screw,p/n: 57 , set screw,p/n: 57.1 , set screw,p/n: 57.2 , cap screw,p/n :40,bxhhs/bxhhs , cap screw,p/n :40.1,bxhhs/bxhhs , cap screw,p/n :40.4,bxhhs/bxhhs , shaft sleeve, p/n 1 , floating bush, p/n : 24 , spring, p/n : 11,bxhhs/bxhhs , flange, p/n 11.1, type bxhhs/bxhhs , gland,pn 1&1a , sleeve packing, pn 11 , collar,pn 5a,5 , packings,pn p,p1,p2,p3,6,6a,g,g1 , stat.face pn 14 , spring holder, ss 316, p/n 17.1 , pkg,seal,fsl,pto , gskt,slev,fsl,pto , insert,mtg,fsl,pto , ring,seal,fsl,pto , bush,throttle,fsl,pto , compression unit,fsl,pto , gskt,slev,fsl,pto , insert,mtg,fsl,pto , screw,set,fsl,pto , mech seal size 58mm,drg no 2h 143308 , spring,p/n:16 , pkg,slve,fsl,3.000in,pto,ct,eu5ef/vvv,11 , retainer ss316 ;p/n44 , setting plates ;ss316;p/n 103 , snap ring 18 8 ss ;p/n 111.1 , cartridge assembly,drg:2h 143296 , o ring; p.no:51a 3 , hast c spring part c;2h 112201 , rot. face gasket,fsl,p/n 76 , pkg,slev,fsl,1.250in,cbr,144kfhh,p/n:11 , cap screw;18 8ss;p/n 40.3 , dog pt setscrw hast c;part 13a;2h 112201 , setting plate;ss316;p/n 103 , cartridge assembly,drg:2h 159624 , lock pin,ss316,p/n 5.1 , sleeve gasket,p/n:s19,viton , sleeve gasket, p/n s19 , spring, p/n 16, , spring, p/n 16, , springholder,316ss,p/n:s 17 , flange gasket , p/n 18 , sleeve gasket p/n: 19 , hex hd cap scrw;ss316;p/n 40.1 , retainingring,316ss,p/n:s 54 , set screw,ss316,p/n 57 , set screw ;ss316;p/n 57 , set screw,alloy steel, p/no 57.1 , seat gasket,p/n 13 , setting plate;ss316;p/n 103 , snap ring p/n 111 , coml seal cartidge;fsl;2h 147089 rev 3 , seal face,sil.car,p/no 14 , seal face,sil.car,p/no 14.1 , bellows assy,p/no 79 , complete cart seal drg 2h 2h 113606 , stub sleeve p/n 1.1 , cartridge assembly,drg:2h 153181...
40937700 supply of hd drop forged hardend temtinghd drop forged hardend temting,hd drop forged hardend temting and digging alloy steel reveting tool is 1836, angle 120, riveting tool size 20mm. [ warranty period: 30 months after the date of delivery ] => limited...
40910308 supply of pulling shoe adopter for ctrb pullerpulling shoe adopter for ctrb puller,pulling shoe adopter for ctrb puller assembly as per drg. attached material : alloy steel make: perfect or similar [ warranty period: 30 months after the date of delivery ] , pulling shoe for ctrb puller cum installer machine as per drg. attached, made with alloy steel, make perfect or similar. [ warranty period: 30 months after the date of delivery ]...
40777759 supply of articulated spherolastic rubber bearingarticulated spherolastic rubber bearing,articulated spherolastic rubber bearing as per fasl drawing no. fasl/sb/0848 for fasl make aar h tight lock coupler for lhb coaches and confirming to rdso specification no: rdso/2011/cg 03(rev 01.). make : frontier alloy steels ltd kanpur (pac item)....
40754794 supply of modified wheel support for normalizingmodified wheel support for normalizing,modified wheel support for normalizing furnace as per rwf drawing no. 70221041 0810, material heat resistant alloy steel casting to is:4522 gr 7. approx. finish wt 41 kg. note (i) casting to be made straight, smooth, true to dimension and free from fins, scabs, blow holes & cold shuts. (ii) all concerns to be 3 mm radilunless otherwise stated. (iii) unspecified tolerance +/ 1.5 mm. mtc and warranty/guarantee certificate is to be submitted by the firm at the time of supply of the material. [ warranty period: 12 months after the date of delivery ]...
40285802 supply of set of tools. one set cosisting the following the items : (i) feelar gauge 0.05 to 1 mm 28 leaves straight 4set of tools. one set cosisting the following the items : (i) feelar gauge 0.05 to 1 mm 28 leaves straight 4,set of tools. one set consisting the following items. (1) heavy duty reversible ratchet handle with head width 80 mm x head depth 37 mm with 30 teeth gear for attaining desire torque having oal 885 mm x 1 square drive made from selected alloy steel duly hardened and tempered. 02 nos. (2) heavy duty reversible ratchet handle made from alloy selected alloy steel with 30 t duly hardened and tempered to with stand , range 3/4 male square drive x 24 long. 06 nos. [ warranty period: 30 months after the date of delivery ] => limited...