aluminium alloy Tenders in Bihar

1
Military Engineer Services - Bihar

46836006 special repair to mes installation at af station darbhanga 1 dismantling ofasbestos cement (corrugated, semicorrugated etc) sheets as in roof coverings including ridgesetc complete all as specified and as directed. 2 s&f pre painted galvatume aluminum zinc coating gi based corrugated steel sheet 0.50mm thick of olive green colour having tensile strength of 550 mpa as in roof overing/cladding to wallfixed with self tapping screws complete all as specified and as directed. 3 s&f pre painted galvalume aluminum zinc coating gi based plain steel sheet 0.50mm thick of olive green colour having tensile strength of 550 mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed. 4 dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and as directed. 5 s&f of rooftrusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc fe 410 w (gde e 250) quality a complete all as specified and as directed. 6 s&f steel rolling shutters having thickness of laths in 1.25 mm withball bearing as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type including safety lever locks mild steel with 4 levers complete all as specified and as directed. 7 dismentling wall and ceiling board or insulation board /slabs/blanket any thickness including cover fillets complete all as specified and as directed. 8 s&f anodised aluminium 605mmx 605 mm snap grid frame work for false ceiling including hangers6 mm dia g.i. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of g.i. flat 40mm x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified and as directed. 9 m&l 12 mm thick gypsum board as in ceiling fixed with screwto gi snap grid frame work as per manufacturers instructions complete all as specified and as directed. 10 m&l applying three coat of white wash includingpreparation of newly surfaces of ceilingboardscomplete all as specified and as directed. 11 dismantling stone slabs and tile of any description or thicknessas in floors, aprons laid bedded and pointed in any mortar complete all as specified and as directed. 12 m&l for 18 to 20 thick prepolishedmirror finished machine cut kota stone slabflooringlaid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing overand including 20 mm thick screed bed in cement mortar 1:6 with beeswax polish complete all as specified and as directed. 13 demolition of cement concrete as in ground floor and paving not exceeding 15cm thickness (below or above the ground level)complete all as specified and as directed. 14 m&l cement concrete 1:4:8 type d 2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed. 15 m&l12.50 mm thick coloured designer endura tiles of size300mm x 300mm exterior grade laid jointedand pointed in neat cement slurrymixed with pigments to match theshade of tileoverand including 15 mm thick screed bed orbedding layer in cement mortar 1:6 complete all as specified and as directed . 16 m&l for 16 to 18 mm thick prepolished mirror finishedmachine cut kota stone slab flooringas in riser of steps,skirting,dado and pillar laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed. 17 m&l for 7 to 8 mm thick coloured non skidceramic tiles(square/ rectagular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc setand jointed in neat cement slurry and pointed in white or coloured cement to match over andincluding 15 mmthick screed bed or beddinglayer in cement mortar 1:6, surface finished even and roughcomplete all as specified and as directed. 18 m&l for 6 to 7 mm thick glazed ceramic coloured tiles in vertical surface of size350mmx250mm or 450mmx 350 mm, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and inclduing 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed. 19 taking down cement or cement lime plaster of any description on brick or stone walls or onconcrete surface etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. 20 m&l 15mm thick rendering in cement mortar1:6 on brick work or concrete surface as in wall, surface finished even and fair complete all as specified and as directed. 21 m&l 15mm thick rendering in cement mortar1:4 on brick work or concrete surface as in wall, surface finished even and fair complete all as specified and as directed. 22 m&l for preparation of newly plastered surfaces of walls, chajjas, columns, beams etc and applying two coats of acrylic smooth exterior paint (100% acrylic) applied @ 1.67 litre/10 sqm over and including priming coat of exterior primer (acrylic base) @ 2.20 kg/10 sqmcomplete all as specified and as directed. 23 m&l applying three coats of white wash including preparation of newly plastered surfaces of wall complete all as specified and directed. 24 m&l for applying one coats of white wash including preparation of old surfaces of ceilingcomplete all as specified and as directed. 25 m&l for applying one coat of white wash includingpreparation of old decorated plasteredsurfaces of wall omplete all as specified and as directed. 26 m&l for complete removal of existing treatment by washing, rubbing down and stopping of painted surfaces of walls, chajjas, columns, beams etc and applying two coats of acrylic smooth exterior paint (100% acrylic) applied @ 1.67 litre/10 sqm over and including priming coat of exterior primer (acrylic base)@ 2.20 kg/10 sqm complete all as specified and as directed. 27 m&l applying one coat of synthetic enamel paintof approved shade includingpreparation of old painted wood and wood based surfaces of any description over 10 cm width or girthcomplete all as specified and as directed. 28 m&lapplying one coat of synthetic enamel paintof approved shade includingpreparation of old painted steel surfaces of any description over 10 cm width or girth complete all as specified and as directed. 29 demolition of brick work or stone/boulder masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed. 30 m&l brick work with sub class b bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and as directed. 31 taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each and removing from site complete all as specified and as directed. 32 taking down chowkats or frame with shutter (without taking out shutter from the frame) exceeding 1.50 sqm and not exceeding 4 sqm each and removing from site complete all as specified and as directed. 33 s&f mild steelrolled section as in door frame, cut to length and bent to shape as required including necessary welding as requiredto receive the door shutter etc conforming to fe 410 w (gde e 250) quality a complete all as specified and as directed. 34 s&f mild steel work as in hold fast and similar small articles conforming to fe 410 0 or fe 310 0 including mild steel screws, bolts etc including tarring with a coat of tar complete all as specified and as directed. 35 m&l cement concrete 1:3:6 type c 1 using 20mm graded stone aggregate for embedding hold fastsand similar other works including necessary use and waste of form workas required complete all as specified and as directed. 36 s&f 30 mm thickfactory made flush shutterssolid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. 37 s&f150 mm extruded aluminium alloy handle, fabricated type omplete all as specified and as directed. 38 s&f 200 mm long aluminium anodized barrel tower bolt of extruded section, complete all as specified and as directed. 39 s&f 300 mmlong mild steel sliding bolt, plate type stove enamelled black with bright bolt not less than12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed. 40 s&f 100 mm size mild steel butt hinges, medium weight cold rolled mild steel and fixed complete all as specified and as directed. 41 s & f, 150mm floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor complete all as specified and as directed. 42 m&l for applying two coats of synthetic enamel paintof approved shade over one coat of pink primer includingpreparation ofwood or wood based material of any description over 10 cmwidth or girth not otherwise described complete all as specified and as directed. 43 s&f for factory made solid pvc door frame of size 50mm x 47mm made out of 5mm plain colour pvc sheet, reinforced with ms square tube fixed in opening complete as per manufacturers specifications complete all as specified and as directed. 44 s&f factory made solid panel pvc door shutter 30mm thick (style) consisting of frame, made out of ms tubes for top and bottom rails ms frame shall be covered with heat moulded plain colour pvc , ‘c’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour pvc sheets for top rail, lock rail & bottom rail on either side & as gap insert for to rail & bottom rail, paneling of plain colour pvc sheet to be fitted in the ms frame welded/sealed to the stiles & rails with suitable pvc sheet beading and jointed together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed. 45 s&f factory made steel windows with side hung shutters using steel section with glazing bars including box type hinge, 01 z section handle, 02 nos 100mm ms tower bolt, one steel peg stay etc in each leafdovetailed or welded complete all as specified and as directed. 46 s&f factory made steel windows with side hung shutters with using z steel section without glazing bars includingbox type hinges, 01 z section handle, 02 nos 100mm ms tower bolt, one steel peg stay etc in each leaf dovetailed or welded complete all as specified and as directed. 47 s&f mild steel framed work such as grill , gratingguard bar as in steel windowand similar works conforming to fe 290 gde e 165 complete all as specified and as directed. 48 s&f3 mm thick sheet glassordinary qualityin square not exceeding 0.5 sqm in each pane andglazing with oil puttycomplete all as specified and as directed. 49 s&f galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed. 50 m&l for applying two coat of synthetic enamel paint of approved shadeover one coat of red oxide primer including preparation of newlysteelor iron work of any description, over 10 cm in width or girth not otherwise described complete all as specified and as directed. 51 s&f in repair of 15 mm bore chromium plated fancy type bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. 52 s&f in repair vitreous china wash hand basin, white, flat back of size 550mm x 400 mm including waste coupling, cast iron brackets, pvc waste pipe32 mm boreincluding necessary connection complete all as specified and as directed. 53 s&f in repair 15mm bore pillar taps, fancy type, cast copper alloy chromium plated with capstan heads, decorative type screwed down, high pressure screwed for iron pipeand fixed complete all as specified and as directed. 54 s&f in repair 15mm borechromium plated fancy type stop valves , cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or union complete all as specified and as directed. 55 s&f in repair 15 mm boreangular valvechromium plated, cast copper alloy fancy type with long shank and cup screwd down, high pressure ,screwed both ends for iron pipes or for unions and fixed complete all as specified and as directed. 56 s&f in repair of pvc connection 15 mm size with ptmt nuts of length 450 mm complete all as specified and as directed. 57 s&f in repair10 litre capacity pvc low level cisternvalveless syphonic action type and pvc bend long type and connectin to flush pipe of any size and pattern with inlet ball valve float and handleincluding bracket completeall as specified and as directed. 58 m&l for500 litre capacity rotational moulded polythylene water storage tanks(cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in ssr i 2009 including 20 mm dia ball valve high pressure with polythne float and fly nutminimum weight 210 gram, tank nipple as requiredcomplete including dismantling of existingunserviceable water tanks and removing from sitecomplete all as specified and as directed. 59 s&f in repair brass chromium plated tubular towel rail, 20mm dia, d type, 60cm long between flanges fixed to wall complete all as specified and as directed. 60 s&f in repair25 mm bore stop valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. 61 s&f in repair20 mm bore stop valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. 62 s&f in repair 32 mm bore pvc flexible waste pipe 800mm long complete all as specified and as directed. 63 s&f in repair 600 mm x450 mm size looking mirror of selected quality glass mounted on 6 mm thick ac building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. 64 s&f in repair vitreous china squatting pan orissa patternof size 580 mm x 440 mm, white with integral foot rests (excluding flushing cistern and flush pipe) including trap set in and including concrete and connection to flushing pipe including lime concrete bedding and connection to antisyphonage pipe etc and making good to floor complete all as specified and as directed. 65 taking up or down 15 mm dia steel tubing and connections including cleaning for refixing or removal to storecomplete all as specified and as directed. 66 fixing only old serviceable 15 mm galvanised iron tubing as obtained from srl itemno 65 with necessary new fittings as requiredcomplete all as specified and as directed. 67 s&f 15 mm bore galvanised steel water tubing medium grade with necessary fittings as required and fixed to walls, ceiling or laid in floors etc complete all as specified and as directed. 68 taking up or down 20 mm dia steel tubing and connections including cleaning for refixing or removal to storecomplete all as specified and as directed. 69 fixing only old serviceable 20 mm galvanised iron tubing as obtained from srl itemno 68 with necessary new fittings as requiredcomplete all as specified and as directed. 70 s&f 20 mm bore galvanised steel water tubing medium grade with necessary fittings as required and fixed to walls, ceiling or laid in floors etc complete all as specified and as directed. 71 s&f in repair75 mm diameter of outlet pvc (swr) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed. 72 s&f in repair 100/125 mm dia chromium platedgratingas required at site complete all as specified and as directed. 73 s&f in repair75 mm bore pvc (swr) pipes single socketed,in any length with adhesive joints laid in trenches or in floors complete all as specified and directed. 74 s&f 75mm bore pvc (swr) bends any radius complete all as specified and as directed. 75 s&f in repair110 mm bore pvc (swr) pipes single socketed,in any length with adhesive joints laid in trenches or in floors complete all as specified and directed. 76 s&f 110 mm bore pvc (swr) bends any radius complete all as specified and as directed. 77 dismantling wooden/rcc posts or struts, any section, including taking out embedded portion (embadded in concrete) and making good disturbed ground complete all as specified and as directed. 78 s&f in repair galvanised ,2 stand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails staining bolts including securing or tying at crossing with and provision of galvanised mild steel wire staples or steel pins etc complete all as specified and as directed.note: each lineof wire to be measured. 79 dismantling fencing wire mesh,any type complete all as specified and as directed. 80 excavating in post holes (or similar holes) in soft/loose soil each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and as directed. 81 m&l cement concrete 1:2:4 type b 2 using 40 mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed. 82 supply only gi chain link fencing any size or any typecomplete all as specified and as directed. 83 fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts etc including provission of binding wire complete all as specified and as directed. 84 m&l for mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc and similar work conforming to fe 290 gde e 165 complete all as specified and as directed. 85 m&l mild steel tmt bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. 86 s&f mild steel screw bolt (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exceeding 5 cm long, diameter of neck 5 to 10 mm complete all as specified and as directed. 87 m&lapplying two coats of synthetic enamel paint of approved shade over one coat of red oxide primer includingprepration of newly steel surfaces of any description not exceeding 10cm in width or girthcomplete all as specified andas directed. 88 taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking creditincluding making good disturbed surfaces of walls, floors etc to match with the existing complete all as specified and as directed. 89 m&l point wiring with single corefrlsh pvc sheathedmulti stranded copper conductor of size 1.5 sqmm drawn through and including non metallic rigid pvc conduit medium grade isi markednot less than 20mm dia with gi saddles gi screws, rawl plugs (concealed conduit wiring in walls and casing capping on ceiling or roof ) including tee, junction boxes and provision of3 mm thick plastic laminated sheet cover of suitable size ,mild steel terminal boxmade out of 1.6mm thick mild steel sheet with brass screwsfor mounting switchs, sockets,regulators etc including 1.5 sqmm frlsh pvc sheathedstrandedcopper conductor cable as continuous earth wire and connected to main earth dolly complete all as specified and directedfor one light/fan/exhaust fan point/ bell point controlled by one switch 90 description same as peritem no 89 above but for 3 pin 5 amps socket outlet on independent boardcomplete all as specified and as directed. 91 description same as peritem no 89 above but for 3 pin 5 amp socket outlet on same board with other switches complete all as specified and as directed. 92 description same as peritem no 89 above but for one power point 3/5 pin 15 amps socket out letindependent board using 2.5 sqmm multi stranded frlsh pvc insulated copper conductor cablewith 2.5 sqmm multi stranded frlsh pvc insulated copper conductor cable as earth wire complete all as specified and as directed. 93 description same as peritem no 89 above but for one power point 3/5 pin 15 amps socket out letindependent board using 4 sqmm multi stranded frlsh pvc insulated copper conductor cablewith 4 sqmm multi stranded frlsh pvc insulated copper conductor cable as earth wire complete all as specified and as directed. 94 s&f switch piano ,flushtype single pole, one way, 6 amps, 230 v complete all as specified and as directed. 95 s&f socket outlet2 in 1, 3 pin, 6 amp,flush type 230 v complete all as specified and as directed. 96 s&f switch socket combination 2 in 1, 3 pin 6 amps and 3 pin 16 amps, flush type universal , 230 volts complete all as specified and as directed. 97 s&f ceiling rose surface bakelite 63.5mm x 20mm complete all as specified and as directed. make : anchor / cona / havells as approved 98 s&f in replacement of lamp holder, pvc/polycarbonate type insulated body with back plate suitable for batten/angle fittings complete all as specified and as directed. 99 s&fin replacement soft plug top 6a with indicator complete all as specified and as directed. 100 s&f in replacement soft plug top 16a with indicator complete all as specified and as directed. 101 s&f led lights fitting 1x 22w, 220v, ac decorative box type with driver, holder including led tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rosecomplete all as specified and as directed. 102 s&fled street light fitting 35 watt230 v, ac outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with ip 65/66 protection complete all as specified and as directed. 103 s&f in replacement led flood light 100 watt, 230 v ,ac outdoor type with thermal management in multiple optics and equipped with ip66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed. 104 s&fin replacement led light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 v, ac decorative type with driver holder and led lamp including connecting up with three core flexible copper conductor cable of suitable sizecomplete all as specified and as directed. 105 s & f inreplacement led 9 watt bulb (lamp) with base b 22 (cool day light), 230 volts, ac, complete all as specified andas directed. 106 s&f stepped type electronic fan regulatorflush type,230v,socketed type complete all as specified and as directed. 107 s&fin replacement of sheet metal enclosure single pole and neutral with a two pin and earth plug and socket with one single pole mcb 20 amp , 240 volts complete all as specified and as directed . 108 taking downold unserviceable main switch/dbs/mcb dbs with mcb including making good the disturbedsurfaces complete all as specified and as directed . 109 s&f factory madesheet metal enclosuredouble door, triple pole and neutral 4 way with 200 amp rated bus bar, 240 v, flush to wallcomplete all as specified and directed. 110 s&ffactory madesheet metal enclosuredouble door, single pole and neutral 8way with 200 amp rated bus bar, 240 v, flush to wallcomplete all as specified and directed. 111 s&ffactory madesheet metal enclosuredouble door, single pole and neutral 4 way with 200 amp rated bus bar, 240 v, flush to wallcomplete all as specified and directed. 112 s&f mcb, tpn 40 to 63 amps 10 ka ,c series, 415 vincluding making connection complete all as specified and as directed.make : havells/abb/ c&s as approved 113 s&f mcb ,spn 6 to 32 amps 10 ka ,c series, 240 v including makingconnection complete all as specified and as directed.make : havells/abb/ c&s as approved 114 s&f mcb ,sp, 6 32 amps, c series, 240 v complete including making connections complete all as specified and as directed.make : havells/abb/ c&s as approved 115 s&f mcb, spn 40 to 63 amps 10 ka ,c series, 415 vincluding making connection complete all as specified and as directed.make : havells/abb/ c&s as approved 116 taking down old unserviceablesub main wiring of any size any type includingexisting batten or conduit complete all as specified and as directed . 117 s&f submain wiring with twosingle core 4 sqmmfrlsh pvc insulatedmultistrand copper conductor cable drawn in andincludingconcealed rigid non metallic pvc conduit dia not less than 20 mm , medium gradeisi marked with all fittings and fixing accessories and one single core 4 sqmmfrlsh pvc insulated multistrand copper conductor cable as continuous earth wire complete all as specified and as directed.note: two run of 4 sq mm copper cable,one run of pvc conduitand one run of 4 sq mm copper cable earth wire shall be measured as one unit. 118 s&f submain wiring with twosingle core 6 sqmmfrlsh pvc insulatedmultistrand copper conductor cable drawn in andincludingconcealed rigid non metallic pvc conduit dia not less than 20 mm , medium gradeisi marked with all fittings and fixing accessories and one single core 6sqmmfrlsh pvc insulated multistrand copper conductor cable as continuous earth wire complete all as specified and as directed.note: two run of 6 sq mm copper cable,one run of pvc conduitand one run of 6 sq mm copper cable earth wire shall be measured as one unit. 119 taking down existing ceiling fan/exhaust fan/cabin fan of any sweep and any make from the exisitng location after disconnecting , carry out minor repair such as oiling greasing and applying one coat of spray painting with white synthetic enamel paintand writing mes no with black synthetic enamel paint and refixing at same location after completion of work complete all as specified and as directed. 120 taking down existing gysers of any capacity and any make from theexisiting location after disconnecting , replacement of thermostats, heating elements etc of suitable capacity carry out minor repair as required and refixing at same location after completion of work complete all as specified and as directed. 121 s&f in replacementpost top lantern led type 40 watt, 230 v ac, outdoortype with decorative post top for 360 degree indirect light ip 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed. 122 m&l earthing complete with galvanised steel earth plate electrode 600mmx600mmx6mm thick, buried directlyin ground(earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire 4.0 mm dia (upto 7.5 m in length from earth plate) by means of bolts, nuts, check nuts and washers of galvanisediron or steel ,filling adequate quantity of charcoldust and common salt all as shown in electrical plate no 3 of ssr part 2009, connected to earthing with dbs all as specified including excavation and earth work in any type of soil, pcc 1:3:6 type c 1 using 20mm graded stone aggregate in chamber &cast iron earthingpit cover having size 300mmx300 mm, weight not less than 7.5 kg as per relevant isincluding frame, 15mm dia gi pipe light grade for earth lead protection, 20mm dia gi medium grade pipe for watering , water funnel etc complete all as specified and testing on completion. 123 s&f in replacement on load changeover switch (in sheet steel enclosure), ac 23 (side handle), 4 pole of capacity 125 amps, 415 volts, 50 hz, conforming to hsn code : 8536 complete all as specified and as directed. make : standard /havells/l&t as approved. 124 s&f in replacement on load changeover switch (in sheet steel enclosure), ac 23 (side handle), 4 pole of capacity 100 amps, 415 volts, 50 hz, conforming to hsn code : 8536 complete all as specified and as directed. make : standard /havells/l&t as approved 125 s&f in replacement on load changeover switch (in sheet steel enclosure), ac 23 (side handle), 4 pole of capacity 63 amps, 415 volts, 50 hz, conforming to hsn code : 8536 complete all as specified and as directed.make : standard /havells/l&t as approved 126 taking outexisting unserviceable ug cables of any cross sectional area and core including pipes, bricks etc of any descriptions and in any position ie laid in trenches or fixed with walls or poles complete all as specified and as directed. 127 supply, laying, jointing and testing xlpe cable insulated, armoured, earthed, heavy duty electric cable with aluminium conductor , 1100 volt grade, cross sectional area 70 sqmm 3.5 core including necessary cable lugs, glands, insulation tape etc complete all as specified and as directed.make: finolex/ gloster/ polycab as approved 128 supply, laying, jointing and testing xlpe cable insulated, armoured, earthed, heavy duty electric cable with aluminium conductor , 1100 volt grade, cross sectional area 95 sqmm 3.5 core including necessary cable lugs, glands, insulation tape etc complete all as specified and as directed.make: finolex/ gloster/ polycab as approved 129 supply, laying, jointing and testing xlpe cable insulated, armoured, earthed, heavy duty electric cable with aluminium conductor , 1100 volt grade, cross sectional area 120 sqmm 3.5 core including necessary cable lugs, glands, insulation tape etc complete all as specified and as directed.make: finolex/ gloster/ polycab as approved 130 supply, laying, jointing and testing xlpe cable insulated, armoured, earthed, heavy duty electric cable with aluminium conductor , 1100 volt grade, cross sectional area 185 sqmm 3.5 core including necessary cable lugs, glands, insulation tape etc complete all as specified and as directed.make: finolex/ gloster/ polycab as approved 131 m&l for 25 mm dia bore galvanised iron light gradefor cable protection and sealing both ends complete all as specified and as directed.make: tata/ jindal/ prakash surya as approved 132 m&l for 40 mm dia bore galvanised iron light gradefor cable protection and sealing both ends complete all as specified and as directed.make: tata/ jindal/ prakash suryaas approved 133 m&l for 50 mm dia bore galvanised iron light gradefor cable protection and sealing both ends complete all as specified and as directed.make: tata/ jindal/ prakash suryaas approved 134 m&l for 80 mm dia bore galvanised iron light gradefor cable protection and sealing both ends complete all as specified and as directed.make: tata/ jindal/ prakash suryaas approved 135 excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth, forfoundation etc and getting out insoft/loosesoil complete all as specified and as directed. 136 returning, filling in, including spreading levelling watering and well ramming in layers not exceeding 25 cmas in soft/loose soil complete all as specified and as directed. 137 removing excavated soilto a distance not exceeding 50 m anddepositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed. 138 m&l for natural river sand as cushioning of cables including spreading and punning downcomplete all as specified and as directed.note : punned thickness shall be measured for payment purpose 139 supply and laying old size bricks , sub class b of size 230mm x 115 mm x 75 mm for cable protection complete all as specified and as directed. 140 earthing complete with galvanized steel earth plate electrode 60 cm x 60cmx 6 mm thick buried direcly in ground vertically to a depth not less than 2.25 meters below normal ground level with the top edge of earth plate not less than 1.5 meters below ground level connected to galvanized iron strip 32mm x 6 mm by means of bolts, nuts, check nuts and washers made out of galvanised iron or steel all as shown in electrical plate no.3 of ssr part i 2009 and earth wire protected by galvanized pipe light grade 40mm bore and through test point, filling of adequate quantity ofcharcol and common saltincluding necessary earth work and excavation in any type of soil, gi light grade 20mm bore watering pipe with funnel and wire mesh, pcc 1:2:4 type b 1 using 20 mm graded stone aggregate as inchamber with cast iron earthing pit cover having size 300 mmx300 mm, weight not less than 7.5 kg conforming to relevant is with framecomplete all as specified and directed and testing on completion. 141 m&l for tripod earthing (3 set earthing inter connected to1 set) maintenance free earthing solutions comprising with the following activity as given below: (i) s&f after digging bore of minimum 63 mm size the cpri tested and ul certified maintenance free earthing system having a set of copper bonded earth rod of 3 meter length, 17.2 mm dia made of high tensile low steel circular rods, molecularly bonded with 99.90% electrolytic grade copper on outer surface (minimum copper bonding thickness 250 microns) with exothermally jointed copper busbar of 200mmx25mmx6 mm for long lasting and connection. earth copper bonded rod & exothermically jointed busbar should be cpri tested on 25ka fault current complete all as specified and directed for complete connections. qty 3 nos(ii) earth copper bonded electrode should be tested by cpri current carrying capacity of earth copper bonded electrode is 25ka/sec (iii)supply and filling of carbon based, ecofriendly earth enhancing compound of rohs tested compound tested by nabl accredited lab in compliance to iec 62561 7 and having passed leaching, sulphur, corrosion resistivity test as per iec62561 7 an international standard for earth enhancement compound in compliance to iec62561 7 with a resistivity<0.12ohm m, 25 kg qty 3 nos. (iv) earth enhancing compound shall be free from corrosion,it shall be carbon based material and shall be free from bentonite and other hazardous substances. the product does not dissolve, deteriorate or leach out of time. it shall be highly conductive and improves earths absorbing power and humidity retention capability, it shall be eco friendly and chemically inert to sub soil.(v) s&f plastic earthpi tcover of size 247mmx338mmx210mm having load bearing capacity of 8ton and complying iec 62561 5. qty 3 nos.(vi) testing on completionnote: on testing after completion if earth resistence is not found below 1.00 ohms,the earthing shall be redone at no extra cost to the government. 142 s&f in replacement 32mmx6mmgalvanised iron strip as earth continuity conductor or main earthing lead fixed to wall on batten or fixed to pole complete all as specified and as directed. 143 s&fin replacement 20mm x 3.15mm copper strip with saddles and fixing screws for roof conductors and down conductors above ground complete all as specified and as directed . 144 s&fin replacement of test point terminal block made of gun metal or phosphorus bronze solid type size 75mmx75mmx25 mm drilled and screwed including 3nos. 8mm dia 25 mm long hexagonal head screw complete all as specified and directed. 145 s & f in replacement air termination, single pointed copper rod 12 mm dia and 300 mm long dischange capacity 65 ka ,including insulators, stay, cement concrete with necessary excavation andearth worksas required complete all as specified and as directed . 146 supply, installation, test and commissioning cpri approved factoryfabricated, out door type, lt feeder pillar box made out of 3.15 mm thick crca sheet of size 1000mmx750mmx350mm with projected globe roof for rain water protection , dust and vermin proof ,double door withboth side opening including neoprene rubber gasket suitable for 440 volt, 3 phase, 4 wire system including danger plate, earthing strip point and ventilation louvers at rear side, bottom detachable gland plate complete with suitable size zinc chromium plated nuts, bolts and washers etc. and embededwith 50mmx50mmx6mm mild steel angle iron frame and 600 mm above the normal ground level complete withinternal connection with suitable size of cable, cable lugs and cable glandspcc foundation in cement concrete 1:3:6 type c 2 using 20mm graded stone aggregate and testing after installation complete all as specified and comprising of the following :–(a) aluminium bas bar 200amps 04 nos, supported with suitable size of heavy duty porcelin stand lock with suitable sizeof brass nut, bolts and washer with heat shrinkable pvc sleeving.the bar shall be colour coded (red, yellow and blue) for three phases and black for neutral.(b) mccb 200amps, 415 volt,16 ka breaking capacity4 pole electromagnetic releaseduly connected to busbar asincoming 01 nos make: legrand model no: 420015 or equivalent from schinder/l&t/havells as approved 147 s&fbusbar chamber 200 amps, 4 way,4 polewall mounted ip 31 protection , made out of 1.6 mmthick crca sheet epoxy powder coated single layer operational voltage 440 volt, short circuit current capacity 25 ka for 1 secondincluding fixing on wall with required fixing arrangement as per manufacturers instruction and necessary cable connection withcable glands as required including testingcompleteall as specified and directed.make : havells/ hpl/standard as approved ...

Due Date : January 17, 2025

Tender Value : ₹ 64 Lakhs

View Tender
2
Department Of Science And Technology - Bihar

46737630 supply of machines and equipments for civil engineering lab 1 direct reading transit theodolite 2 with tripod angular accuracy 2 telescope. min magnification 30 x min objective aparture 45 mm. minimum focusing vial 30(/2mm) or better, sensitivity of circular level vial 8(/2mm) or bettewr. display lcd both side. lummet laser/optical no’s 5 2 dumpy level with tripod min telescope length 228mm, min diaphragm etched on glass with stadia 1:100, screw focusing eye piece, highly sensitive spirit bubbles, aperture not less than 3.76cm . min magnification 38 x, magnetic compass, longitudinal bubble no’s 5 3 prismatic compass with tripod aluminium ring, magnetized needle, automatic lifter and prism readin, hinged coloured shades and reflector, tripod stand, aluminium stand. no’s 10 4 cross staff cross staff wooden 4x4x2 with steel pole no’s 2 5 optical square optical square pwd pattern no’s 10 6 ranging rod (steel) 4m socket type (30mm dia.) : : made of steel conduit pipe alternatively painted black and white or red and white. fitted with strong shoe at the bottom, size 4 mtr no’s 20 7 ranging rod (steel) 3m socket type (30mm dia.) : : made of steel conduit pipe alternatively painted black and white or red and white. fitted with strong shoe at the bottom, size 3 mtr no’s 20 8 leveling staff (4m) made of aluminium channel. screen printed figures in four five section and six respectively. packed in canvas cover no’s 10 9 leveling staff (5m) made of aluminium channel. screen printed figures in four five section and six respectively. packed in canvas cover no’s 10 10 leveling staff (6m) made of aluminium channel. screen printed figures in four five section and six respectively. packed in canvas cover no’s 10 11 engineers measuring chain 30m 10 arrows made of 8 swg wire (size dia. 4mm & l. 30cm) no’s 5 12 metallic tape 30m, measuring metallic tape no’s 5 13 arrows (metal) arrows made of 8 swg wire no’s 20 14 mallet and pegs (wooden) wooden peg and mallet no’s 5 15 spirit level brass made size 6 no’s 5 16 invar tape 30m fiber glass tape of length 30m no’s 2 17 surveyor compass surveyor compass with all accessories no’s 2 18 stand standard stand no’s 3 19 chain engineers measuring chain 30m made of swg nos. 8 with 100 links size 30m long with 150 links 15 arrows no’s 5 20 metallic tape 10m, measuring metallic tape no’s 5 21 pegs pegs (wooden) no’s 50 22 hammer hammer (1kg) no’s 5 23 plane table and its accessories plane table with accessories size (750*600)mm * 15mm thickness. sight vane, size 600mm, made of brass of 2mm thickness, in wooden box magnetic compass, size 150mm, made of aluminium alloy, in wooden box. plumb bob made of steel with suspending cord plumbing fork, made of aluminium. spirit level made of aluminium in wooden box strong canvas carrying case this plane table set is supplied along with aluminium telescopic stand no’s 5 24 metallic tape 5m, measuring metallic tape no’s 5 25 prism square to lay off right angles that are multiples of 90 degree or of 45 degree no’s 5 26 clinometer this manipulative is to measure angle of elevation or depression of any objected. this model can be used to find height and distance of a building etc. provided in durable box. optical adjustment for reading no’s 2 27 tachometer specification : 5 digit 18 mm (0.6) white backlight lcd accuracy +(0.05% + 1digit) sampling time : 0.5sec(over 120rpm) range select : auto switch memory : max. value. min. value, last value can store 96s data time base. 6mhz quartz crystal detecting distance : 50 50mm power consumption : approx. 55ma measuring range : 2.5 99999rpm resolution 0.1rpm (2.5 999.9rpm) 1rpm(over1000rpm) total test range : 1 99999 frequency range: 1 1666.6hz resolution: 0.01hz time base accuracy 10x10 6(0 50degree c.) power: 3x1.5v aa battery no’s 2 concrete technology lab. 1 compaction factor apparatus material of construction: special quality low carbon mild steel. 2 paint quality: powder coating 70 80 micron thick for determination of workability determination of concrete mixes of very low workability such as those normally used with concrete, compacted by vibration. concrete mix having maximum size of aggregate not exceeding 38 mm, can be tested for workability. compaction factor apparatus is complete with hoppers and receiver assembly, tamping rod of 16 mm dia x 60 cm long having a hooper and two trowels. as per is 1199, 5515 & bs 1881 103 no’s 2 slump test apparatus slump test apparatus with testing rod and base plate, consisting of slump cone, base plate (200mm and height 300mm) with swivel handle, tamping rod steel, 16 mm dia x 600 mm length as per isi 7320 no’s 4 3 vee bee consisto meter material of construction:special quality low carbon mild steel with good paint quality vibrator table : min 380*260. four rubber shock absorbers with a.c. supply motor 415 volts, 3 phase, one metal pot, one slump cone, one swivel arm with metal cone, one graduated rod, one perspex disc. one tamping rod as per is 1199 no’s 2 4 cement mortar moulds cement mortar mould, steel, for 70.6mm cube with isi certification mark, is:10086, machined with a permissible variation of 0.15mm and finished within tolerances of +0.15mm 0.10mm no’s 10 5 cylindrical moulds cast iron, split lengthwise 150mm dia x 300mm high with baseplate and top plate no’s 5 6 cube moulds cast iron, for 150mm cube with isi certification is:10086 no’s 10 angle between adjacent interior faces and between interior faces and top and bottom plates of mould 90+/ 0.5deg length of base plate min. 280mm width of base plate min. 215mm machined flat to +/ 0.02 mm of accuracy and finished to within +/ 0.2 mm of specified dimensions. approx wt minium to14kg 7 le chatelier flask le chatelier flask, determination of specific gravity of hydraulic cement as specified in is:4031 1968. nos 5 8 le chatelier apparatus le chatelier mould with is 269, 712 6392 part ix. this unit comprises of a metal sleeve with a hook and set of screw to fit over one of the mould pointers and a clamp to fit on to the other pointer of the mould. nos 5 9 standard vicat’s apparatus vicat apparatus with isi certification mark, is:5513. nos 5 10 needle vibrator immersion type needle vibrator, electrically operated, motor single phase 2hp, needle dia 40mm length (including needle) 4 5 mtrs. no’s 1 11 digital weighing balance electronic balance, capacity min: 20kg ± 2g no’s 1 12 digital platform balance electronic balance, capacity min: 100kg ± 10g no’s 1 13 trowel made of iron, standard size no’s 10 14 spatulla 100mm, 150mm, 200mm blade of iron no’s 10 15 guinia made of iron, 200mmx 100mm metallic no’s 10 16 spirit level digital, made of brass no’s 10 17 floor tile testing machine (flexure and abrasion) with all accessroies size: 280×150×100mm: voltage 220 v: displacement measurement error ≤0.01mm, temperature record value error: ±1% no’s 1 18 weight 2kg, 1kg, 100g, 200g, 50g, 500g set 1 19 weight hanger provided with hook, made of steel no’s 1 20 steel scale 300mm size no’s 5 21 thickness and length gauge for flakness and elongation index material ss, application thickness & length gauge no’s 5 22 i.s. sieves set sieves 20 cm diameter brass aperture size 4.75 mm, 2.36 mm, 1.18mm, 600 micron, 300 micron,150 micron and 75 micron as per is 460 no’s 2 phe (public health engineering) lab 1 ph meter 20 x 2 line back lighted lcd display., ph meter complies to usp and din standards, alphanumeric splash waterproof polyester keyboard with soft keys., range 0° to 150° c. no’s 1 2 turbidity meter 0 10,000 ntu , ± 2% of reading plus 0.01 ntu (0 to 1000 ntu)± 5% of reading (1000 to 4000 ntu) ± 10% of reading (4000 to 10,000 ntu) , response time: less than 6 seconds, sample size: 30ml, operating temperature: 0° 50°c no’s 1 3 test tube glass test tube 150 mm tall x 16 m with 14 mm inside diameter. approximate volume is 22 ml. borosil no’s 24 4 magnetic stirrer with hot plate number of stirring positions: 1 no’s 1 calibration: automatic calibration type of drive motor: motorless magnetic coil type display option/output read out option: digital magnetic stirrer is: with a hot plate or some other means for heating the liquid controller type: electronically controlled and programmable speed control accuracy of set speed (+/ ) (rpm): 0 maximum stirring capacity per position: 2000 milliliter ceramic top plate material, digital front panel, last run memory ce certified product (seller to furnish supporting document to buyer on demand) speed speed mode: variable speed minimum speed possible (rpm): 50 maximum speed (rpm) of variable speed mode equipment: 1600 dimensions external dimension: (height )200 millimeter external dimension: width 200 millimeter external dimension: depth: 50 millimeter body material: stainless steel finish of body material: powder coated top plate finish: ceramic coated stir bar stir bar cover material: ptfe quoted alnico magnet stir bar length: 200 millimeter top plate top plate area shape: circular circular top plate diameter: 1000 millimeter top plate finish: ceramic coated 5 burette 50 ml, made of borosil no’s 6 6 burette. stand with rod,clam & boss head base 8 x 5, rod 2411 long, 1.1tree finger clamp no’s 10 7 conical flask 250 ml, made of borosil no’s 6 8 pippette, 25 ml, made of borosil no’s 10 9 rubber gloves, nitrile rubber (l size) box 4 10 apron white cloth lab apron (m size) no’s 5 11 nessler tube borosil glass, 3.3mm thick, and 100ml capacity no’s 6 12 glass test tubes glass test tube 150 mm tall x 16 m with 14 mm inside diameter. approximate volume is 22 ml. made of borosil no’s 24 13 thermometer digital display, accuracy +/ 1c (measurement upto 150 degree c) no’s 3 14 petri dish borosilicate glass petri dish 90mm no’s 10 15 silica crucible (50m1) heat resistant, strong build quality {10 piece of each). can be used in muffle furnace at high tempareture up to 1000 degree celcius no’s 10 16 silica crucible (100 ml) heat resistant, strong build quality {10 piece of each). can be used in muffle furnace at high tempareture up to 1000 degree celcius no’s 10 17 bod bottle 300ml bottle , made of borosil no’s 30 18 digital cod digester (for 10 ml cod vials) digestion capacity 10 16 vials vial volume maximum 10m1 vial dimension 16 x 100 mm digestion temperature 20c 200° c no’s 1 19 chloroscope square unbreakable test tube 2 nos, glass dropper with rubber test 1no, o toluidine reagent 125ml, packed in thermocol box, to check chlorine in drinking water from 0.25ppm to 2ppm no’s 6 20 porcelain dish 80mm dia, 40 ml no’s 6 21 measuring cylinder 250 ml made of borosil no’s 6 22 beaker 250 ml made of borosil no’s 6 23 filter paper 42 & 45 no. no’s 12 24 funnel made of borosil no’s 6 geo tech. engg 1 i.s. sieves 20 cm diameter brass aperture size 4.75 mm, 2.36mm, 1.18mm, 600micron, 300 micron,150 micron and 75 micron as per is 460 sieves 20 cm diameter brass aperture size 4.75 mm, 2.36 mm, 1.18mm, 600 micron, 300 micron,150 micron and 75 micron as per is 460 set 2 2 pycnometer as per is:2386 ( part 3 ) consist of a 1 kg glass jar with brass cone no’s 6 3 liquid limit device casagrande grooving tools and gauge block with ac supply compliance with is:2720 (part 5), is:9259 no’s 6 consists of a hard rubber base casagrande grooving tool gauge block 4 plastic limit set glass plate, flexible spatula, brass / ss rod, moisture dish & porcelain dish. no’s 6 5 core cutter as per is:2720 (part 29), min. 100 mm dia x 130 mm long, steel dolly 25 mm high and 100 mm dia,rammer with steel rod. no’s 4 6 density bottle 100 ml, made of borosilicate no’s 5 7 density bottle 50 ml, made of borosilicate no’s 5 8 proctor test apparatus for heavy compaction proctor test apparatus for heavy compaction, material mild steel as per the is:2720 (part 8), rammer and base plate, made of mild steel no’s 1 150 mm dia, 127.3 mm height 2,250 ml volume. rammer: 4.9 kg 9 direct shear apparutus . moterised with 12 speed . as per is : 2720 ( part xiii ) ref. standards is :11229, 2720 (part 13) no’s 1 type of shear : direct / residual measurement operation : motorised rates of strain (mm/min) : 1.25, 0.625, 0.25, 0.125, 0.05, 0.025, 0.01, 0.005, 0.002, 0.001, 0.0004, 0.0002 specimen size : 60 x 60 x 25 mm digital indicator, load cell 2kn, displacement sensor range : 0 20mm. shear box assembly, this assembly comprises of : halves of the shear box 2 nos. plane gripper plate 2 perforated gripper plate 2 porous stone 2 top loading pad 1 base plate 1 specimen cutter 1 min normal stress 3 kg/cm2 operation : motorised 10 laboratory vane shear apparatus as per the is:2720 (part 30) with special motor, rotation 0.10/sec. no’s 1 rate of rotation : 1/60 rpm suitable for operation on 220 v, 50 hz, single phase, ac supply. container 1 no.set of 4 springs, (one each of capacity 2 kg cm, 4 kg cm, 6 kg cm and 8 kg cm min) 11 sieve shaker sieve shaker, motorized, with built in digital timer, • a digital timer adjustable from 0 99 minutes is incorporated as an integral part of the equipment. no’s 1 • the sieve shaker can carry up to 8 sieves of 20cm diameter, also supplied with 30cm adaptor. it is driven by a ¼ hp geared motor. , • the sieve table is inclined from the vertical axis and the direction of inclination changes progressively in the clockwise direction. in addition to the gyratory motion of the table, there is a tapping motion as well. suitable for operation on 220 v, 50 hz, single phase, ac supply. 12 electronic balance upto 500g, and 5 kg no’s 1 13 glass measuring cylinder 1000 ml no’s 5 14 stop watch accuracy : 0.01 seconds no’s 2 15 hydrometer apparatus hydrometer, range: 0 20, 20 40, 40 60, 60 80, & 80 100 no’s 5 16 metre scale 300 mm length, steel made no’s 2 17 shrinkage limit set as per is : 2720 (part 6), porcelain evaporating dish, shrinkage bath, glass cup, min. three metal prongs, perspex plain plate spatula, glass cylinder, 25 ml x 0.5 ml, mercury. no’s 2 18 sample extractor application soil extractor, capacity 5 ton, automation grade manual no’s 1 19 sand bath device with tray, stove, palet, knife, steel top with powder coated, 230v, single phase no’s 1 20 non corridible air tight container or can 100 ml, 200 ml, 500 ml, 1000 mlset of 6 for each nos 24 21 thermometer 0.5degree c 60 degree c no’s 2 22 water bath 15 litre capacity, temperature controlled, led water bath no’s 1 mom lab. 1 beam deflection apparatus structural lab a mild steel beam 2.5 cm x 3 mm in cross section and 100 cm long is pinned to two supports 70 cm apart situated symmetrically. one of the ends can be fixed or given a known slope by applying a known moment at the end with the help of suspended loads. at the other end also a known moment can be applied at various points along the span of the beam. no’s 1 2 abrasion testing machine for glezed tile voltage 230, power 100 watt, 50 hz, single phase ac supply no’s 1 3 flexure strength testing machine flexure testing machine electrically operated, material of construction: no’s 1 weight of the load frame: min. 130kg hydraulic system: with min. 15 liters, hydraulic oil feed and fuel pump separately, 0.5 hp, 1 ph, 220v ac motor driven two speed hydraulic pump.standard confirm to: conforms to is 516 and is : 14858, machines conforming to astm c39. ...

Due Date : December 31, 2024

Tender Value : ₹ Ref. Documents

View Tender
3
Ministry Of Power - Bihar

46702335 bids are invited for electrical,accessories item name : welding receptacle box type : switch+socket+plug rating : 63a industrical grade welding receptacle (fully interlocked switch and socket outlet): suitable for 440v, 3phase+n+e, 63amps, with the following specification1) receptacles boxes shall be fabricated out of 2mm thick ms sheet hot dip galvanized or of not less than 2.5 mm thick die cast aluminum alloy or fabricated out of 2mm thick crca sheet with electrostatic powder coating. 2) plug and socket shall be shrouded die cast aluminum. socket shall be provided with lid safety cover by a spring loaded latch. to insert the plug latch has to be pressed to open the lid. robust mechanical interlock shall be provided such that the switch can be put on only when the plug is fully engaged, and plug can be withdrawn only when the switch is in off position. also cover can be opened only when the switch is in off position, the terminal blocks shall be of 1100 v grade made up of unbreakable polyamide 6.6 grade. 3) supply isolation with tpn heavy duty double break rotary switch rated for 440v, 63amps, ac23 category mounted on front door cover of the enclosure. 4) electrical protection: four pole rcbo rating 63a,30 ma sensitivity incorporated in the circuit having facility for manual testing/checking of operation. the rcbo shall be placed inside the main cover and shall not be accessible from outside. 63a, 4 pole rcbo specifications : a)conforms to iec 60755 b)rated current 63a c)sensitivity 30ma d)rate voltage 415v e)rated insulation voltage 660v total quantity : 45...

Due Date : December 30, 2024

Tender Value : ₹ 4.85 Lakhs

View Tender
4
Military Engineer Services - Bihar

46431432 tender for special repair to bldg no p 22 (smc) at af station bihta; 1 taking up or down 15 mm dia steel tubing and connections including cleaning for refixing or removal to storecomplete all as specified and as directed. 2 s&f 15 mm bore galvanised steel water tubing medium grade with necessary fittings as required and fixed to walls, ceiling or laid in floors etc complete all as specified and as directed. 3 s&f in repair 15mm borechromium plated fancy type stop valves , cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or union complete all as specified and as directed. 4 s&f in repair 15 mm borechromium plated concealed type angular stop valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or union complete all as specified and as directed. 5 s&f in repair of chromium plated 125 mm long shower rose with or without swivel joints including fixing to steel pipe or union complete all as specified and as directed. 6 s&f in repair of 15 mm bore chromium plated fancy type bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. 7 s&f in repair of pvc connection 15 mm size with ptmt nuts of length 450 mm complete all as specified and as directed. 8 s&f in repair of soap dish stainless steel chromium plated decorative type approximate size 160mmx160mmx90mm complete all as specified and as directed. 9 s&f in repair brass chromium plated tubular towel rail, 20mm dia, d type, 60cm long between flanges fixed to wall complete all as specified and as directed. 10 s&f in repair vitreous china squatting pan orissa patternof size 580 mm x 440 mm, white with integral foot rests (excluding flushing cistern and flush pipe) including trap set in and including concrete and connection to flushing pipe including lime concrete bedding and connection to antisyphonage pipe etc and making good to floor complete all as specified and as directed. 11 s&f in repair vitreous china pedestal patternwash down water closet, white (excluding flushing cistern and flush pipe) including connection to drain (or out going pipe) and to flushing pipe, anti syphonage pipe, etc complete with plastic water closet seat cover, white, closed pattern with flat bottom and cover with mild steel chromium plated or aluminised hinging device complete all as specified and as directed. 12 s&f in repair10 litre capacity pvc low level cisternvalveless syphonic action type and pvc bend long type and connectin to flush pipe of any size and pattern with inlet ball valve float and handleincluding bracket completeall as specified and as directed. 13 s&f in repair vitreous china bowl type urinal,flat back of size 465mm x 355mm x 265 mm white (minimum), with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2including necessary connection complete all as specified and as directed. 14 s&f in repair 15mm bore pillar taps, fancy type, cast copper alloy chromium plated with capstan heads, decorative type screwed down, high pressure screwed for iron pipeand fixed complete all as specified and as directed. 15 s&f in repair 1200 mm x900 mm size looking mirror of selected quality glass mounted on 6 mm thick ac building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. 16 s&f in repair health faucet (abs body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 mlong flexible tube and abs wall hook including making connections and fixed in position complete all as specified and as directed.. 17 s&f sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm longcomplete all as specified and as directed. 18 s&f liquid soap container of ptmt fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 105 grams) complete all as specified and as directed. 19 s&f in repair 75mm pvc (swr) floor trap, plain with grating including jointing with solvent cement etc complete all as specified and as directed. 20 dismantling existing cast iron soil vent pipe upto 100 mm internal dia, fixed to wall laid in trenches incl all fitting & accessories complete all as specified and as directed. 21 s&f 100 mm dia sandcast iron soil waste and vent pipes in any length with or without ears laid in trenches or in floor with cement joints complete all as specified and as directed. 22 s&f 100 mm dia spun cast iron soil waste and vent pipesin any length with or without ears fixed to walls with cement joints complete all as specified and as directed. 23 s&f 75 mm dia spun cast iron soil waste and vent pipesin any length with or without ears laid in trenches or in floor with cement joints complete all as specified and as directed. 24 s & f 75 mm dia spun cast iron soil waste and vent pipesin any length with or without earsfixed to wall with cement joints complete all as specified and as directed. 25 s&f 100 mm bore cast iron bends of any radius diminshing pieces or tapers (larger bore measured) complete all as specified and as directed. 26 s&f 75 mm bore cast iron bends of any radius diminshing pieces or tapers (larger bore measured) complete all as specified and as directed. 27 s&f 100 mm borecast iron cowls complete all as specified and as directed. 28 s&f 75 mm borecast iron cowls complete all as specified and as directed. 29 taking down chowkats or frame with shutter (without taking out shutter from the frame) exceeding 1.50 sqm and not exceeding 4 sqm each and removing from site complete all as specified and as directed. 30 s&f for factory made solid pvc door frame of size 50mm x 47mm made out of 5mm plain colour pvc sheet, reinforced with ms square tube fixed in opening complete as per manufacturers specifications complete all as specified and as directed. 31 s&f factory made solid pvc moulded door shutter , 28 to 30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded pvc sheet on the front face & 2 mm plain colour pvc sheet on back face, supplying andfixing in frame at site as pe specification and drawing, complete all as specified and as directed. 32 s&f factory made upvc door frame made of upvc, extruded sections having an overall dimension (exxtruded section profile) 42mm x 50mm (tolerance +1 mm), with wall thickness 2.0 mm(+ 0.2 mm), corners of the door frame jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. the hinge side vertical of the frames reinforced by galvanised mild steel tube of size 19mm x 19mm and 1mm (+ 0.1mm) wall thickness and 3 nos stainless steel hinges of suitable size fixed to the frame complete all as specified and as directed. 33 s&f factory made upvc white colour casement (openable) glazed door made of extruded profile with wall thickness of 2.3 mm (+0.2mm) . window profile with hollow section with multi chamber , frame (60mm x 58 mm), sash (60 x 78 mm). t profile (one vertical length in between two shutters) (60 mm x 74 mm). glazing bead ( 35 mm x 20 mm) will be mitred cut and fusion weldedat all corners. including drilling of holesfor fixing hardware and drainage of water etc. making arrangement for fixing of hardware. epdm gasket 1.2 +0.2mm thick galvanised steel frame (28 mm x 21.5 mm), sash (31 mm x 27 mm), t profile (27 mm x 17 mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasteners.[hardware: casement door handle made of zinc alloyed (white powder coated), corner striker, secondary strikers, cylinder, door transmission gear made of mild steel with multi point locking system with strikes, 3d hinges of zinc alloyed (white powder coated) and 5 mm thick glazing with selected quality glass complete all as specified and as directed.note: the unit rate quoted by contractor excludes cost of glass and includes all other conneted accessories. net opening will be measured for payment purpose. 34 s&f factory made upvc white colour casement (openable)wire mesh door made of extruded profile with wall thickness of 2.3 mm (+ 0.2mm) . window profile with hollow section with multi chamber , frame (60mm x 58 mm), sash (60 x 78 mm). t profile (one vertical length in between two shutters) (60 mm x 74 mm) including drilling of holesfor fixing hardware and drainage of water etc. making arrangement for fixing of hardware. epdm gasket 1.2 + 0.2mm thick galvanised steel frame (28 mm x 21.5 mm), sash (31 mm x 27 mm), t profile (27 mm x 17 mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasteners.[hardware: casement door handle made of zinc alloyed (white powder coated), corner striker, secondary strikers, cylinder, door transmission gear made of mild steel with multi point locking system with strikes, 3d hinges of zinc alloyed (white powder coated) andwire mesh of approved quality complete all as specified and as directed.note: the unit rate quoted by contractor excludes cost of wiremesh and includes all other conneted accessories. net opening will be measured for payment purpose. 35 s&f 100 mm size mild steel butt hinges, medium weight cold rolled mild steel and fixed complete all as specified and as directed. 36 s&f 200 mm long aluminium anodized barrel tower bolt of extruded section, complete all as specified and as directed. 37 s&f 150 mm long aluminium anodized barrel tower bolt of extruded section, complete all as specified and as directed. 38 s&f150 mm extruded aluminium alloy handle, fabricated type omplete all as specified and as directed. 39 s&f floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor overall length of cover plate 140mm complete all as specified and as directed. 40 s&f aluminium extruded section body door closer hydraulically regulated designation no. 3, universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and as directed. 41 s&fstainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed. 42 s&f 4 mm thick figured glass, pin head type and glazing with oil putty in square exceeding 0.5 sqm each pane, complete all as specified and as directed. 43 dismantling wall and ceiling boards(fibre pulp insulation etc.) or insulations boards /slabs/blankets any thickness including aluminium / gi snap gridof any description complete all as specified and as directed. 44 s&f anodised powder coated gi snap grid frame work for false ceiling including perimeter channel and hanger 6mm dia gi (upto 1200 mm length) adjustinglevel fixed to roof slabby means of ceiling cleat made out of gi flat 40mmx3mm size 60 mm long and expansion hold fastners 12.5 mm dia 40 mm long complete all as specified and as directed. 45 s&f 12 mm thick gypsum board asin ceiling fixed with screw as per manufacturers instructions complete all as specified and as directed. 46 dismantling of brick work or stone boulder masonary built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars, dressed stone work & precast concrete articles and removing rubbish from premises to a distance not exceeding50 m complete all as specified and as directed. 47 m&l brick work withold size flyash bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar1:6 complete all as specified and as directed. 48 m&l 15mm thick rendering in cement mortar1:6 on brick work or concrete surface as in wall, surface finished even and fair complete all as specified and as directed. 49 m&l reinforced cement concrete 1:2:4type b 1 (nominal mix)using 20mm gradedstone aggregate as in beams, cantilevers, bressummers, lintels over 1.5 m span complete all as specified and as directed. 50 use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressumers, lintels, cantilevers, shelves including supports, overhangs etc also splays between floors and beams etc rough finished surfaces of concrete complete all as specified and as directed. 51 m&l mild steel tmt bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. 52 m&l mild steel tmt bars 6 mm dia and over as in stirrups, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. 53 taking down cement plaster on brick or stone walls & chajja including raking out joint, hacking for key,scrubbing downwith water complete all as specified and as directed. 54 m&l 5mm thick rendering in cement mortar1:3 on concrete surface as in ceiling, surface finished even and fair complete all as specified and as directed. 55 m&l 15mm thick rendering in cement mortar1:4 on brick work or concrete surface as in wall mixed with water proofing compound as per manufacturers instruction, surface finished even and fair complete all as specified and as directed.note: water proofing compound shall be measured and paid seperately. 56 supply only integral water proofing compound complete all as specified and as directed. 57 m&l forapplying two coats of acrylic smooth exterior paint (100% acrylic) applied @ 1.67 litre/10sqm over and including priming coat of exterior primer (acrylic base) applied @ 2.20 kg/10sqmof approved shade including preparation of newly plastered surfaces of walls, chajjas, columns, beams etc complete all as specified and as directed. 58 m&l forapplying two coats of acrylic smooth exterior paint (100% acrylic) applied @ 1.67 litre/10sqm over and including priming coat of exterior primer (acrylic base) applied @ 2.20 kg/10sqmof approved shade including complete removal of existing treatment and preparation of old decorated surfaces of walls, chajjas, columns, beams etc complete all as specified and as directed. 59 m&l for applying three coats of white wash including preparation of newlyplastered surfaces of ceilingcomplete all as specified and as directed. 60 m&l for applying two coats of white wash including preparation of old surfaces of ceilingcomplete all as specified and as directed. 61 m&l applying two coats oil bound distemper of approved shade over a coat of alkali resistant primer over and including 1 mmthick wall care putty including preperation of newly plastered surfaces of wallcomplete all as specified and as directed. . 62 m&l applying two coats oil bound distemper of approved shade over a coat of alkali resistant primer over and including 1 mmthick wall care putty including complete removal of existing treatment and preperation of old decorated surfaces of wallcomplete all as specified and as directed. . 63 m&l forapplying three coats of white wash includingpreparation of newlyplastered surfaces of wallcomplete all as specified and as directed. 64 m&l for applying two coat of white wash includingpreparation of old decorated plasteredsurfaces of wall omplete all as specified and as directed. 65 demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed. 66 m&l for 25 mm thick cement concrete 1:2:4 type b 0 using 12.5 mm gradedstone aggregate as on floor, surface finished even and fair complete all as specified and as directed. 67 m&l for 18 to 20 mm thickprepolished mirror finished machine cut kota stone slab laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4 including rubbing and polishingcomplete all as specified and as directed. 68 m&l for 16 to 18 mm thick prepolished mirror finishedmachine cut kota stone slab flooringas in riser of steps,skirting,dado and pillar laid and jointed with grey cement slurry mixed with pigment to match the shade of the slabover 10 mm thick rendering in cement mortar 1:4 including rubbing and polishing complete all as specified and as directed. 69 m&l for 7 to 8 mm thick coloured non skidceramic tiles(square/ rectagular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc setand jointed in neat cement slurry and pointed in white or coloured cement to match over andincluding 15 mmthick screed bed or beddinglayer in cement mortar 1:6, surface finished even and roughcomplete all as specified and as directed. 70 dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. 71 demoliton of stone slabs and tiles of any description or thickness in floors, apron, platform etc laid, bedded and pointed in any mortar complete all as specified and as directed. 72 rounding to edges of stone slabs one edge, such as in steps, cooking platform, and similar situations complete all as specified and as directed. 73 m&l for 6 to 7 mm thick glazed ceramic coloured tiles in vertical surface of size350mmx250mm or 450mmx 350 mm, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and inclduing 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed. 74 m&l for 7 to 8 mm thick coloured non skidceramic tiles(square/ rectagular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc setand jointed in neat cement slurry and pointed in white or coloured cement to match over andincluding 15 mmthick screed bed or beddinglayer in cement mortar 1:6, surface finished even and roughcomplete all as specified and as directed. 75 s&f 25mm thick harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and as directed. 76 s&f in repair vitreous china wash hand basin, white, flat back of size 550mm x 400 mm including waste coupling, cast iron brackets, pvc waste pipe32 mm boreincluding necessary connection complete all as specified and as directed. 77 taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking creditincluding making good disturbed surfaces of walls, floors etc to match with the existing complete all as specified and as directed. 78 m&l point wiring with single corefrlsh pvc sheathedmulti stranded copper conductor of size 1.5 sqmm drawn through and including non metallic rigid pvc conduit medium grade isi markednot less than 20mm dia with gi saddles gi screws, rawl plugs (concealed conduit wiring in walls and casing capping on ceiling or roof ) including tee, junction boxes and provision of3 mm thick plastic laminated sheet cover of suitable size ,mild steel terminal boxmade out of 1.6mm thick mild steel sheet with brass screwsfor mounting modular switchs, sockets,regulators etc including 1.5 sqmm frlsh pvc sheathedstrandedcopper conductor cable as continuous earth wire and connected to main earth dolly complete all as specified and directedfor one light/fan/exhaust fan point/ bell point controlled by one switch 79 description same as peritem no 78 above but for 3 pin 5 amps socket outlet on independent boardcomplete all as specified and as directed. 80 description same as peritem no78 above but for 3 pin 5 amp socket outlet on same board with other switches complete all as specified and as directed. 81 description same as peritem no78 above but for one bell/buzzer point controlled by one bell push switch complete all as specified and as directed. 82 description same as peritem no 78 above but for one power point 3/5 pin 15 amps socket out letindependent board using 2.5 sqmm multi stranded frlsh pvc insulated copper conductor cablewith 2.5 sqmm multi stranded frlsh pvc insulated copper conductor cable as earth wire complete all as specified and as directed. 83 s&f modular switch 1 way, 6a,1 module complete all as specified and as directed. 84 s&f modular sockets 6 a, 2/3 pin ,2 module complete all as specified and as directed. 85 s&f modular switch 1 way, 16a,1 module complete all as specified and as directed. 86 s&f modular sockets 6a/16 a , 2/3 pincombined, 2 module complete all as specified and as directed. 87 s&f ceiling rose surface bakelite 60mmx25mm three terminal 240 vcomplete all as specified and as directed. 88 s&f modular bell push flush type 6 a, 240 v complete all as directed. 89 s&fbell ,ac, 230 v, single pole complete all as specified and as directed. 90 s&f led lights fitting 1x 20w, 220v, ac decorative box type with driver, holder including led tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rosecomplete all as specified and as directed. 91 s&f led luminaire 600 mm x 600 mm, 35/36 watt, 220 v, ac recessed type with high efficiency pmma diffuser soft glare free light complete with driver, holders and led lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed. 92 s&f in replacement ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 v, 1200 mm sweep. min air delivery 210 cfm with service value 6.00 bee. five star rated with brushless direct current motor (bldc)complete all as specified and as directed.note : old unserviceable ceiling fans shall be deposited in messtore yard. 93 m&lfor hanging ceiling fanand connecting up including provision of cable from ceiling rose or connector to fan including applying one coat of synthetic enamel paint of approved shade including preperation of surfacesincluding filling cavitiesand taking down existing ceiling fan complete all as specified and as directed. 94 s&f mcb ,sp, 6 32 amps, c series, 240 v complete including making connections complete all as specified and as directed. 95 s&f mcb ,double pole, 40 63 amps, c series, 240 v complete including making connections complete all as specified and as directed. 96 s&fsheet metal enclosuredouble door, single pole and neutral 8way with 200 amp rated bus bar, 240 v, flush to wall including all cutting etc on wall and making good the disturbed surfaces to match the existing including taking out oldunserviceable db box complete all as specified and directed. 97 s&f 63 amp mcb, 415v, 10ka b curve,4 pole including necessary connection complete all as specified and as directed. 98 s&fsheet metal enclosuredouble door, triple pole and neutral 8 way with 200 amp rated bus bar, 240 v, flush to wall including all cutting etc on wall and making good the disturbed surfaces to match the existing including taking out oldunserviceable db box complete all as specified and directed. 99 s&f submain wiring with twosingle core 4 sqmmfrlsh pvc insulatedmultistrand copper conductor cable drawn in andincludingconcealed rigid non metallic pvc conduit dia not less than 20 mm , medium gradeisi marked with all fittings and fixing accessories and one single core 4 sqmmfrlsh pvc insulated multistrand copper conductor cable as continuous earth wire complete all as specified and as directed.note: two run of 4 sq mm copper cable,one run of pvc conduitand one run of 4 sq mm copper cable earth wire shall be measured as one unit. 100 s&f submain wiring with twosingle core 6 sqmmfrlsh pvc insulatedmultistrand copper conductor cable drawn in andincludingconcealed rigid non metallic pvc conduit dia not less than 20 mm , medium gradeisi marked with all fittings and fixing accessories and one single core 6sqmmfrlsh pvc insulated multistrand copper conductor cable as continuous earth wire complete all as specified and as directed.note: two run of 6 sq mm copper cable,one run of pvc conduitand one run of 6 sq mm copper cable earth wire shall be measured as one unit. 101 s&f sheet metal enclosure with socket and plug top and mcb single pole and neutral enclosure with two pin and earth plug and socketwith one single pole mcb,20 amp,240 v complete all as specified and as directed. 102 m&l for taking downexisitngair conditioning indoor and outdoor unit with stand copper tubing or air curtain carefully with refrigerant and refixing the same afterrepair work and testingcomplete all as specified and directed. 103 s&fled street light fitting 35 watt230 v, ac outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with ip 65/66 protection complete all as specified and as directed. 104 m&l earthing complete with galvanised steel earth plate electrode 600mmx600mmx6mm thick, buried directlyin ground(earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanisediron strip 25mmx4mm (upto 7.5 m in length from earth plate) by means of bolts, nuts, check nuts and washers of galvanisediron or steel ,filling adequate quantity of charcoldust and common salt all as shown in electrical plate no 3 of ssr part 2009, connected to earthing with dbs all as specified including excavation and earth work in any type of soil, pcc 1:3:6 type c 1 using 20mm graded stone aggregate in chamber &cast iron earthingpit cover having size 250mmx250 mm, weight not less than 7.5 kg as per relevant isincluding frame, 40 mm dia gi pipe light grade for earth lead protection, 20mm dia gi medium grade pipe for watering , water funnel etc complete all as specified and testing on completion. 105 supply, laying, jointing and testing xlpe cable insulated, armoured, earthed, heavy duty electric cable with aluminium conductor , 1100 volt grade, cross sectional area 35 sqmm 3.5 core including necessary cable lugs, glands, insulation tape etc complete all as specified and as directed.make: finolex/ gloster/ polycab 106 supply, laying, jointing and testing xlpe cable insulated, armoured, earthed, heavy duty electric cable with aluminium conductor , 1100 volt grade, cross sectional area 10 sqmm 2 core including necessary cable lugs, glands, insulation tape etc complete all as specified and as directed.make: finolex/ gloster/ polycab 107 excavation in trenches , not exceeding 1.5 m wide and not exceeding 1.5 m in depthfor founddationetc and getting out in soft/loose soil complete all as specified and as directed. 108 returning, filling in, including spreading levelling watering and well ramming in layers not exceeding 25 cmas in soft/loose soil complete all as specified and as directed. 109 removing excavated soilto a distancenot exceeding 50 manddepositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed. 110 supply and laying old size bricks of designation 75 for cable protection complete all as specified and as directed. 111 m&l for natural river sand as cushioning of cables including spreading and punning downcomplete all as specified and as directed.note : punned thickness shall be measured for payment purpose 112 m&l 50 mm bore galvanised iron pipe light grade as in protection to cable laid in trench or in floor or fixed to wall with necessary fittings complete all as specified and as directed.. 113 m&l 25 mm bore galvanised iron pipe medium gradelaid in trench or in floorwith necessary fittings including taking out existing pipe complete all as specified and as directed.. 114 m&l 25 mm bore gun metal gate valve with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.. ...

Due Date : December 31, 2024

Tender Value : ₹ 39 Lakhs

View Tender
5
Eastern Railways - Bihar

46135467 supply of interchangeable, preset torque wrenchinterchangeable, preset torque wrench,interchangeable, preset torque wrench with pre set value locking and safety device. having a spigot dia. of 22 mm made of single piece of aluminium alloy body. torque range: 140 620 nm (105 45 0 lbf. ft.) net weight: 3kgs or less, length: 834.50 mm, supply along with 3/4 inch sq. drive ratchet head f or vande bharat train. make gedore/ armstrong/ ridgid/ macmen or similar. [ warranty period: 30 months after the date of delivery ] ]...

Due Date : December 02, 2024

Tender Value : ₹ Ref. Documents

View Tender
6
Ministry Of Power - Bihar

45901072 bids are invited for led lights schedule 1 m8211010101 technical specifications : 10 w led batten tube light (2ft+/ 10%) 1. system power/wattage : 10 w 2. power factor : >0.95 3. cri (color rendering index) : >= 80 4. cct (correlated color temperature) : 5700 +/ ansi tolerance* 5. system efficacy : >100 lm/w 6. lumens output: wattage x system efficacy 7. ip (ingress protection): ip20 8. operating voltage : 230 v ac +/ bis tolerance 9. color designation cool day lamp 10. led tube integral batten type. 11. beam angle (nom) 120 ° 12. rohs (restriction of hazardous substances) rohs compliance 13. ce mark na 14. operating temperature : 0 50 deg c 15. housing material : plastic / glass/ polycarbonate 16. minimum impact protection: ik 02 17. surge protection device : 2.5kv 18. led chip efficacy : >135lm/w schedule 2 m8211010205 lamp,led technical specifications : 20 w led batten tube light 4ft. (1200mm +/ 10%) 1. system power/wattage : 20 w +/ 10% 2. power factor : >0.95 3. cri (color rendering index) : >= 80 4. cct (corelated color temperature) : 5700 +/ ansi tolerance* 5. system efficacy : >100 lm/w 6. lumens output: wattage x system efficacy 7. ip (ingress protection): ip20 8. operating voltage : 230 v ac +/ bis tolerance 9. color designation cool day lamp 10. led tube integral batten type. 11. beam angle (nom) 120 ° 12. rohs (restriction of hazardous substances) rohs compliance 13. operating temperature : 0 50 deg c 14. housing material : plastic / glass/polycarbonate 15. minimum impact protection: ik 02 16. surge protection device : 2.5kv 17. led chip efficacy : >135lm/w schedule 3 m8211011001 technical specifications : led bulb 9 w 1. system power/wattage : 9 w led bulb 2. power factor : >0.95 3. cri (color rendering index) : >= 80 4. cct (correlated color temperature) : 5700 +/ ansi tolerance* 5. system efficacy : >=100 lm/w 6. lumens output : wattage x system efficacy 7. ip (ingress protection): ip20 8. operating voltage : 230 v ac +/ bis tolerance 10. led bulb type : pin type (b22) 11. beam angle (nom) 120 ° 12. rohs (restriction of hazardous substances) rohs compliance 13. ce mark na 14. operating temperature : 0 50 deg c 15. housing material : plastic / glass 16. minimum impact protection: ik 02 17. surge protection device : 2.5kv 18. led chip efficacy : >135lm/w 19 life test/burning hours : 25000 hrs life with 70% lumens maintained schedule 4 m8225120680 technical specifications :led based street light fitting : 110w (minimum) 1. system power/wattage : 110 w +/ bis tolerance 2. power factor : > 0.95 3. cri ( color rendering index) : > 70 4. cct (correlated color temp) : 5700 k +/ ansi tolerance 5. surge protection device : 20 kv / 10ka a. internal >= 4 kv b. external external 10 ka, 20 kv 6. cable : as per manufacturer standard 7. ip (ingress protection) :ip 66 waterproof, dustproof, impact proof & corrosion proof features meeting requirement of outdoor application. ip66 8. input voltage : 230 v ac +/ bis tolerance 9. driver efficacy : > 85 % 10. system efficacy : > 110 lm/w 11. lumens output wattage x system efficacy 12. warranty : 3 years 13. optical cover/lens type: polycarbonate high impact resistant & less glare meeting impact protection code ik08 / polycarbonate micro lens optic polycarbonate high impact resistant & less glare meeting impact protection code ik07 / polycarbonate micro lens optic 14. thd <10% 15. housing: high pressure die cast aluminium housing/heat sink which gives rugged feature for industrial application. high pressure die cast aluminium housing ( adc 12 ) 16.mounting device : suitable for diameter up to 52 mm to 58 mm 17. operating temperature: 0 50 deg c 18. rohs (restriction of hazardous substances) compliance rohs compliance 19. ce mark na 20. protection class iec : safety class i 21. led chip efficacy : > 135 lm/w schedule 5 m8225121036 technical specifications : led panel light led based 2x2 recess type fitting : 36w 1. system power/wattage : 36w 2. power factor : >0.95 3. cri ( color rendering index) : >80 4. cct (correlated color temp) : 5700 +/ ansi tolerance* 5. surge protection device : a. internal : 2.5 kv b. external : 10 ka, 20 kv 6. cable : as per manufacturers standard. 7. ip (ingress protection): ip20 8. input voltage : 230 v ac +/ bis tolerance 9. driver efficacy : >85% 10. system efficacy : >100lm/w 11. lumens output: wattage x system efficacy 12. optical cover/lens material : polymathic methacrylate 13. thd : <10% 14. housing: metal, optic material : polystyrene, fixation material steel 15.mounting arrangement: recess 16. operating temperature: 0 45 deg c 17. ce mark na 18. minimum impact protection: ik 02 19. protection class iec : safety class i 20. led chip efficacy : >135 lm/w 21. life test/burning hours : 50000 hrs life with 70% lumens maintained 22. beam angle : luminaire light beam spread 120° schedule 6 m8225123537 led based hand lamp ( flame proof) 15w,24v led based wattage: 15 w cri>70 cct: 5700 to 6500 k. +/ ansi tolerance surge protection device: 4 kv system efficacy: >90 lm/w ingress protection: ip 66 operating voltage: 24 v warranty : 3 years gas group :iib & iic temp class :t5 material construction :lm6 gasket :moulded neoprene enclosure:ex d as per is/iec 60079 i:2007 certification: cimfr (dhanbad),bis & peso/dgms (ccoe) licenses is mandatory. material housing:copper free die cast aluminium alloy,lm 6; cu <0.004% hardware such as nut,bolt/washers: stainless steel transparent part: heat resistant and toughened type a clear dome glass/ flat glass gasket: endless moulded neoprene. operating temperature: 10 to 50 deg c type of painting : high build epoxy / marine coating with stopper plug & double compression cable gland. schedule 7 m8225125180 technical specifications : led well glass non flameproof 70 w 1. system power/wattage : 70w 2. power factor : >0.95 3. cri ( color rendering index) : >75 4. cct (correlated color temp) : 5700 +/ ansi tolerance* 5. surge protection device : a. internal : 4kv b. external : 10 ka, 20 kv 6. life test/burning hours : 50000 hrs life with 70% lumens maintained 7. ip (ingress protection) : ip 66 waterproof, dustproof, impact proof & corrosion proof features meeting requirement of outdoor application. 8. input voltage : 230 v ac +/ bis tolerance 9. driver efficacy : >85 % 10. system efficacy : >100 lm/w 11. lumens output wattage x system efficacy 12. cable : as per manufacturer standard 13. optical cover/lens type: polycarbonate bowl/cover frosted high impact resistant & less glare meeting impact protection code ik08 14.minimum ik test requirement for luminaire ik08 15. thd : <10% 16. housing: high pressure die cast aluminium housing/heat sink which gives rugged feature for industrial application. 17.mounting arrangement: adjustable mounting bracket / c clamp for suspension & the fixture should have tillable adjustment for changing angle. 18. operating temperature: 0 50 deg c 19. rohs (restriction of hazardous substances) compliance rohs compliance 20. ce mark na 21. protection class iec : safety class i 22. led chip efficacy : >135 lm/w 23 life test/burning hours : 50000 hrs life with 70% lumens maintained schedule 8 m8225125241 technical specifications : led well glass flameproof 120 w 1 system power/wattage : 120 w 2 power factor : >0.95 3 cri ( color rendering index) : >75 4 cct (correlated color temp) : 5700 +/ ansi tolerance* 5 surge protection device : 1. internal : 5kv ; 2. external 10 ka, 20 kv 6 life test/burning hours : 50000 hrs life with 70% lumens maintained 7 ip (ingress protection) : ip 66 8 voltage : 230 v ac +/ bis tolerance 9 driver efficacy : >85% 10 system efficacy : >100 lm/w 11 gas group : iia, iib & iic 12 material of construction : lm6 13 gasket : molded silicon 14 enclosure : ex d as per is/iec 60079 i : 2007 15 temperature class : a temperature class (upto 50w lights) : t6 b temperature class (more than 50w lights) : t5 16 certification & approval : cimfr, bis & peso (ccoe) /dgms / ce / rohs 17 materials a housing : copper free die cast aluminium alloy, lm6 ; cu < 0.004% b hardware such as nut, bolts, washers : stainless steel c transparent part : optical cover/lens type: polycarbonate bowl/cover frosted high impact resistant & less glare meeting impact protection code ik08 18 thd : <10% 19 minimum ik test requirement for luminaire ik08 20 operating temperature : 0 50 deg 21 type of painting : high build epoxy / marine coating 22 double compression gland both side : ertl or cimfr certified 23 mounting arrangement: adjustable mounting bracket / c clamp for suspension & the fixture should have tillable adjustment for changing angle. 24 led mounted : smd / cob 25 led chip efficacy : >135 lm/w schedule 9 m8225127405 technical specifications :led based flood light fitting : 70w (minimum) 1. system power/wattage : 70 w +/ bis tolerance 2. power factor : > 0.95 3. cri ( color rendering index) : > 70 4. cct (correlated color temp) : 5700 k +/ +/ ansi tolerance 5. surge protection device : 20 kv / 10ka a. internal >= 4 kv b. external external 10 ka, 20 kv 6. cable :as per manufacturer standard 7. ip (ingress protection) :ip 66 waterproof, dustproof, impact proof & corrosion proof features meeting requirement of outdoor application. ip66 8. input voltage : 230 v ac +/ bis tolerance 9. driver efficacy : > 85 % 10. system efficacy : > 110 lm/w 11. lumens output wattage x system efficacy 12. warranty : 3 years 13. optical cover/lens type: polycarbonate high impact resistant & less glare meeting impact protection code ik08 / polycarbonate micro lens optic polycarbonate high impact resistant & less glare meeting impact protection code ik07 / polycarbonate micro lens optic 14. thd :< 10 % 15. housing: high pressure die cast aluminium housing/heat sink which gives rugged feature for industrial application. high pressure die cast aluminium housing ( adc 12 ) 16.mounting device : angle adjuster 17. operating temperature: 0 50 deg c 18. rohs (restriction of hazardous substances) compliance rohs compliance 19. ce mark na 20. protection class iec : safety class i 21. led chip efficacy : > 135 lm/w schedule 10 m8225127432 technical specifications :led based flood light fitting : 190w (minimum) 1. system power/wattage : 190 w +/ bis tolerance 2. power factor : > 0.95 3. cri ( color rendering index) : > 70 4. cct (correlated color temp) : 5700 k+/ ansi tolerance 5. surge protection device : 20 kv / 10ka a. internal >= 4 kv b. external external 10 ka, 20 kv 6. cable : as per manufacturer standard 7. ip (ingress protection) :ip 66 waterproof, dustproof, impact proof & corrosion proof features meeting requirement of outdoor application. ip66 8. input voltage : 230 v ac +/ bis tolerance 9. driver efficacy : > 85 % 10. system efficacy : > 110 lm/w 11. lumens output wattage x system efficacy 12. warranty : 3 years 13. optical cover/lens type: polycarbonate high impact resistant & less glare meeting impact protection code ik08 / polycarbonate micro lens optic polycarbonate high impact resistant & less glare meeting impact protection code ik07 / polycarbonate micro lens optic 14. thd : < 10 % 15. housing: high pressure die cast aluminium housing/heat sink which gives rugged feature for industrial application. high pressure die cast aluminium housing ( adc 12 ) 16.mounting device : angle adjuster 17. operating temperature: 0 50 deg c 18. rohs (restriction of hazardous substances) compliance rohs compliance 19. ce mark na 20. protection class iec : safety class i 21.led chip efficacy : > 135 lm/w schedule 11 m8225127520 technical specifications :led based flood light fitting :140 w 1. system power/wattage : 140w +/ bis tolerance 2. power factor : > 0.95 3. cri ( color rendering index) : > 70 4. cct (correlated color temp) : 5700 k +/ ansi tolerance 5. surge protection device : 20 kv / 10ka a. internal >= 4 kv b. external external 10 ka, 20 kv 6. cable : as per manufacturer standard 7. ip (ingress protection) :ip 66 waterproof, dustproof, impact proof & corrosion proof features meeting requirement of outdoor application. ip66 8. input voltage : 230 v ac +/ bis tolerance 9. driver efficacy : > 85 % 10. system efficacy : > 110 lm/w 11. lumens output wattage x system efficacy 12. warranty : 3 years 13. optical cover/lens type: polycarbonate high impact resistant & less glare meeting impact protection code ik08 / polycarbonate micro lens optic polycarbonate high impact resistant & less glare meeting impact protection code ik07 / polycarbonate micro lens optic 14. thd : < 10 % 15. housing: high pressure die cast aluminium housing/heat sink which gives rugged feature for industrial application. high pressure die cast aluminium housing ( adc 12 ) 16.mounting device : angle adjuster 17. operating temperature: 0 50 deg c 18. rohs (restriction of hazardous substances) compliance rohs compliance 19. ce mark na 20. protection class iec : safety class i 21. led chip efficacy : > 135 lm/w schedule 12 m8225128648 technical specifications : led down lighter 18 w :18w down light reces(round) 1. system power/wattage: 18w 2. power factor : >0.95 3. cri ( color rendering index) : >75 4. cct (correlated color temp) : 5700 +/ ansi tolerance* 5. surge protection device : >3kv 6. diameter 150mm (cutout size) 7. cable :as per manufacturer standard 8. ip (ingress protection): ip 20 9. input voltage : 230 v ac +/ bis tolerance 10. driver efficacy : >75% 11. system efficacy : >100 lm/w 12. lumens output: wattage x system efficacy 14. thd : <10% 15. housing: aluminum die casting 16. minimum impact protection: ik 02 17. operating temperature: 0 45 deg c 18. ce mark na 19. protection class iec : safety class i 20. led chip efficacy : >135lm/w schedule 13 m8225129030 technical specifications : led high bay light 110w (minimum) 1. system power/wattage : 110 w +/ bis tolerance 2. power factor : >0.95 3. cri ( color rendering index) : >75 4. cct (correlated color temp) : 5700 +/ ansi tolerance* 5. surge protection device : a. internal 4kv b. external 10 ka, 20 kv 6. cable :as per manufacturer standard 7. ip (ingress protection) : ip66 waterproof, dustproof, impact proof & corrosion proof features meeting requirement of outdoor application. 8. input voltage : 230 v ac +/ bis tolerance 9. driver efficacy : >85% 10. system efficacy : >100 lm/w 11. lumens output : wattage x system efficacy 12. optical cover/lens type: polycarbonate bowl/cover frosted high impact resistant & less glare meeting impact protection code ik08 13.minimum ik test requirement for luminaire ik08 14. thd : <10% 15. housing: high pressure die cast aluminium housing/heat sink which gives rugged feature for industrial application. 16. mounting arrangement: adjustable mounting bracket / c clamp for suspension & the fixture should have tillable adjustment for changing angle. 17. operating temperature: 0 50 deg c 18. rohs (restriction of hazardous substances) compliance rohs compliance 19. ce mark na 20. protection class iec : safety class i 21.led chip efficacy : >135 lm/w 22. luminaire light beam spread 120 deg 23. life test/burning hours : 50000 hrs life with 70% lumens maintained schedule 14 m8225700161 post top light 45w led based composite luminaire/decorative light fittings:type of fitting garden/area lighting:fitting particulars post top light 45w led based system power/wattage:45w (minimum) +/ bis tolerance pf:>0.95 cri:>70 cct:5700 to 6500 +/ ansi tolerance ip: ip 65 post top height as per manufacturer drawing. total harmonics distortion :<=10% the luminaire shall be protected against surges and transients of >::=10kv (external), >=4kv (internal) input voltage : 230 v ac +/ bis tolerance lumanaire efficience:>80 for clear glass > 60 for diffused glass driver efficiency:>85% suitable to be retrofitted on up to75 od pipe with 03/04 nuts and bolts. otherwise connector from 75 mm dia to post top led dia to be provided. warranty: 3 years schedule 15 m8225127414 technical specifications :led based flood light fitting : 110 w (minimum) 1. system power/wattage : 110 w +/ bis tolerance 2. power factor : > 0.95 3. cri ( color rendering index) : > 70 4. cct (correlated color temp) : 5700 k +/ ansi tolerance 5. surge protection device : 20 kv / 10ka a. internal >= 4 kv b. external external 10 ka, 20 kv 6. cable : as per manufacturer standard 7. ip (ingress protection) :ip 66 waterproof, dustproof, impact proof & corrosion proof features meeting requirement of outdoor application. ip66 8. input voltage : 230 v ac +/ bis tolerance 9. driver efficacy : > 85 % 10. system efficacy : > 110 lm/w 11. lumens output wattage x system efficacy 12. warranty : 3 years 13. optical cover/lens type: polycarbonate high impact resistant & less glare meeting impact protection code ik08 / polycarbonate micro lens optic polycarbonate high impact resistant & less glare meeting impact protection code ik07 / polycarbonate micro lens optic 14. thd : < 10 % 15. housing: high pressure die cast aluminium housing/heat sink which gives rugged feature for industrial application. high pressure die cast aluminium housing ( adc 12 ) 16.mounting device : angle adjuster 17. operating temperature: 0 50 deg c 18. rohs (restriction of hazardous substances) compliance rohs compliance 19. ce mark na 20. protection class iec : safety class i 21. led chip efficacy : > 135 lm/w schedule 16 m8225125171 technical specifications : led well glass non flameproof 35 w 1. system power/wattage: 35w 2. power factor : >0.95 3. cri ( color rendering index) : >75 4. cct (correlated color temp) : 5700 +/ ansi tolerance* 5. surge protection device : a. internal : 4kv b. external : 10 ka, 20 kv 6. life test/burning hours : 50000 hrs life with 70% lumens maintained 7. ip (ingress protection) : ip 66 waterproof, dustproof, impact proof & corrosion proof features meeting requirement of outdoor application. 8. input voltage : 230 v ac +/ bis tolerance 9. driver efficacy : >85 % 10. system efficacy : >100 lm/w 11. lumens output = wattage x system efficacy 12. cable : as per manufacturer standard 13. optical cover/lens type: polycarbonate bowl/cover frosted high impact resistant & less glare meeting impact protection code ik08 14.minimum ik test requirement for luminaire ik08 15. thd : <10% 16. housing: high pressure die cast aluminium housing/heat sink which gives rugged feature for industrial application. 17.mounting arrangement: adjustable mounting bracket / c clamp for suspension & the fixture should have tillable adjustment for changing angle. 18. operating temperature: 0 50 deg c 19. rohs (restriction of hazardous substances) compliance rohs compliance 20. protection class iec : safety class i 21. led chip efficacy : >135 lm/w 22 life test/burning hours : 50000 hrs life with 70% lumens maintained schedule 17 m8225129137 technical specifications : led high bay light 140 w (minimum) 1. system power/wattage :140w +/ bis tolerance 2. power factor : >0.95 3. cri ( color rendering index) : >75 4. cct (correlated color temp) : 5700 +/ ansi tolerance* 5. surge protection device : a. internal 4kv b. external 10 ka, 20 kv 6. cable : :as per manufacturer standard 7. ip (ingress protection) : ip66 waterproof, dustproof, impact proof & corrosion proof features meeting requirement of outdoor application. 8. input voltage : 230 v ac +/ bis tolerance 9. driver efficacy : >85% 10. system efficacy : >100 lm/w 11. lumens output : wattage x system efficacy 12. optical cover/lens type: polycarbonate bowl/cover frosted high impact resistant & less glare meeting impact protection code ik08 13.minimum ik test requirement for luminaire ik08 14. thd : <10% 15. housing: high pressure die cast aluminium housing/heat sink which gives rugged feature for industrial application. 16. mounting arrangement: adjustable mounting bracket / c clamp for suspension & the fixture should have tillable adjustment for changing angle. 17. operating temperature: 0 50 deg c 18. rohs (restriction of hazardous substances) compliance rohs compliance 19. ce mark na 20. protection class iec : safety class i 21.led chip efficacy : >135 lm/w 22. luminaire light beam spread 120 deg 23. life test/burning hours : 50000 hrs life with 70% lumens maintained schedule 18 m8225129058 technical specifications : led high bay light 190w (minimum) 1. system power/wattage :190w +/ bis tolerance 2. power factor : >0.95 3. cri ( color rendering index) : >75 4. cct (correlated color temp) : 5700 +/ ansi tolerance* 5. surge protection device : a. internal 4kv b. external 10 ka, 20 kv 6. cable : as per manufacturer standard 7. ip (ingress protection) : ip66 waterproof, dustproof, impact proof & corrosion proof features meeting requirement of outdoor application. 8. input voltage : 230 v ac +/ bis tolerance 9. driver efficacy : >85% 10. system efficacy : >100 lm/w 11. lumens output : wattage x system efficacy 12. optical cover/lens type: polycarbonate bowl/cover frosted high impact resistant & less glare meeting impact protection code ik08 13.minimum ik test requirement for luminaire ik08 14. thd : <10% 15. housing: high pressure die cast aluminium housing/heat sink which gives rugged feature for industrial application. 16. mounting arrangement: adjustable mounting bracket / c clamp for suspension & the fixture should have tillable adjustment for changing angle. 17. operating temperature: 0 50 deg c 18. rohs (restriction of hazardous substances) compliance rohs compliance 19. ce mark na 20. protection class iec : safety class i 21. led chip efficacy : >135 lm/w 22. luminaire light beam spread 120 deg 23. life test/burning hours : 50000 hrs life with 70% lumens maintained total quantity : 26250...

Due Date : October 26, 2024

Tender Value : ₹ Ref. Documents

View Tender
7
East Central Railway - Bihar

45801833 supply of 3/4 inch sq. preset torque with preset3/4 inch sq. preset torque with preset,3/4 inch sq. preset torque with preset value locking and safety device made in single piece o f aluminium alloy housing to be fixed at 250nm,(torque range 140 620 nm) with following accessories 1, 3 /4 inch ratchet head fitting 01 no 2open end fitting (size 46 mm) 01 no 3 ring and fitting (size 46mm) 01n o make inger soll rand ,chicago pneumatic snapon or armstrong or samtool or gedore or similar. calibrati on certificate to be provided by nabl accredited lab or oem. certificate of genuineness to be furnished at t ime of supply by oem/authorised dealer. annexure a attached. [ warranty period: 30 months after the da te of delivery ] ]...

Due Date : October 28, 2024

Tender Value : ₹ Ref. Documents

View Tender
8
Ministry Of Power - Bihar

45741553 bids are invited for 100242623 10 m0171131000 bar,circular,ss,aisi316,25mm , 100242623 20 m0171131602 bar,circular,ss,aisi316,40mm , 100242623 30 m0171133200 bar,circular,ss,aisi316,80mm , 100242623 40 m0171181005 bar,circular,ss,aisi410,25x2000mm , 100242623 50 m0171181209 bar,circular,ss,aisi410,30mm , 100242623 60 m0171181607 bar,circular,ss,aisi410,40mm , 100242623 70 m0171184004 bar,circular,ss,aisi410,100mm , 100242623 80 m0171182804 bar,circular,ss,aisi410,70mm , 100245983 20 m0171110328 bar,circular,ss,aisi304,8mm , 100245983 30 m0171110407 bar,circular,ss,aisi304,10mm , 100245983 80 m0188852128 wire mesh pl weld mesh,ss,aisi304,50mm ss rod bar material high strength deformed steel bars and wires for concrete reinforcement conforming to is 1786, weight lock, sweeping ss handle broom stick, drill rods for tools, towel rail ring for bathroom, wrought aluminium and aluminium alloys bars, rods and sections (general engineering purposes) as per is 733, copper rods and bars for electrical purposes is:613, counter chair (bar pub), electrodes for manual metal arc welding of stainless steel and other similar high alloy steels as per is 5206, metal beds (v2) 1 13 total quantity : 5600...

Due Date : November 05, 2024

Tender Value : ₹ Ref. Documents

View Tender
9
Indian Army - Bihar

45509861 bids are invited for cp bib cock long body with flange 15 mm fancy type isi marked cp bib cock long nose with flange 15 mm fancy type long body isi marked cp stop cock 15mm male thread isi marked cp brass concealed stop cock 15 mm with flange isi marked cp stop cock 15mm female thread isi marked cp angle cock 15 mm with flange isi marked cp angle cock two way 15mm with flange as per is 8931 abs hand shower multi flow 100 x 230mm with 1.5 mtr ss tube and abs hook abs overhead shower 125mm dia cp brass health faucet with ss pipe 1.0 mtr and abs hook cp jet spray cp wall mixer with l bend for overhead shower 15mm isi marked cp wall mixer telephonic with crutch with provn for hand shower 15mm isi marked central hole cp basin mixer without pop up cp pillar cock swan neck t or m 15 mm fancy type isi marked wall mounted cp sink mixer with regular spout 15 mm brass cp towel rail glossy finish round 600 mm long pvc ball cocks high pressure with epoxy coated alumn rod with hd ball 20 mm complete pvc ball cocks high pressure with epoxy coated alumn rod with hd ball 25 mm complete looking mirror 600 x 450 x6 mm with frame glass shelves 500 x 60 mm ply wood 6ft x 3ft x 12 mm bwr gde as per is 303 pvc flushing cistern low level of 10 ltr capacity isi marked collapsible pvc waste pipe 32mm for whb basin 950mm long brass cp soap dish fancy type glossy finish collapsible pvc waste pipe 40mm for urinal 800mm long cp ss waste coupling light half threaded 32 mm dia brass cp waste coupling heavy full threaded 40 mm dia brass cp waste coupling heavy full threaded 50 mm dia cp waste coupling 100 mm dia for stainless steel sink plastic seat cover for ewc colour white plate rack stainless steel grade 204 of size 786mm height 914mm width 254mm depth and 0.85mm ss grating round slotted doom type 102 mm dia aisi 304 ss grating round slotted doom type 102 mm dia aisi 304 with waste hole plate rack stainless steel grade 204 of size 786mm height 760mm width 254mm depth and 0.85mm pvc brauded connection 15 x 300mm long with ptmt nut collar bush and spanner pvc brauded connection 15 x 375mm long with ptmt nut collar bush and spanner pvc brauded connection 15 x 450mm long with ptmt nut collar bush and spanner pvc brauded connection 15 x 600mm long with ptmt nut collar bush and spanner white portland cement a grade 1.0 kg decorative quality multi purpose ss bracket foldable multipurpose for ss sink brass sliding bolt 300 mm with 16mm bolt complete brass sliding bolt 250 mm with 16mm bolt complete wire mesh 0.47 mm aperture of width 1200 mm length 8.20mtr aluminum door handle d type 100 mm isi marked aluminum door handle d type 125 mm isi marked aluminum door handle d type 150 mm isi marked aluminium alloy extruded section curtain rails of size 25mm and 12ft long as per is 10342 1982 curtain rod aluminum 20mm aluminium single diamond brackets curtain holder with ss support 1 inch curtains rod pocket finials designer pack of 1 pair cp hydraulic door closer cast iron body designation no 2 universal type suitable for door shutters of 701 to 850mm in width and weight between 36 to 60 kg ms butt hinges medium grade 100 mm as per is 1341 1992 aluminium barrel tower bolts with barrel and bolt of almn extruded section of 150mm length aluminium skeleton tower bolts with plate staples and bolt of extruded sections of aluminium alloy of size 150mm ms sliding door 250mm with bolt type and complying to is 281 1991 ms sliding door 200mm with bolt type and complying to is 281 1991 ms sliding door 300mm with bolt type and complying to is 281 1991 sliding door bolt aluminum 300mm with fixing bolts complete complying to is 281 1991 floor door stopper brass 125mm confirming to is 1823 1980 bracket cp for curtain rod 19 mm floor door stopper aluminum of 125mm confirming to is 1823 1980 aluminum tower bolt 200mm confirming to is 204 part 2 1992 aluminum tower bolt 100mm confirming to is 204 part 2 1992 ms bow handle stove enamelled black 125mm conform to is 208 1996 curtain rod stainless steel with brackets 20mm hack saw blade double edge 300 mm hasp and staple aluminum alloy safety type 100 mm conform to is 363 1993 hasp and staple aluminum alloy safety type 50 mm conform to is 363 1994 oil putty for fixing of window glass nails wire polished round 25mm size nails wire polished round 35mm size nails wire polished round 50mm size nails wire polished round 80mm size teak wood beading 4 mm thick x 20 mm half round mild steel 45 x 5 mm standard wood screws drum polish pkt of 200 pieces mild steel 45 x 5 mm standard wood screws drum polish pkt of 200 pieces mild steel 75 x 7 mm standard wood screws drum polish pkt of 200 pieces heavy duty padlocks dark grey with 8 keys 100mm hardened solid steel monoblock lock anti drill and anti saw and weighing not less than 850g gi steel tubing medium gde of 15 mm dia with one socket gi steel tubing medium gde of 20 mm dia with one socket gi steel tubing medium gde of 25 mm dia with one socket gi nipple 15 x 100mm gi nipple 15 x 300 mm gi nipple 15x75mm isi marked gi nipple threaded 15 x 25mm isi marked gi barrel nipple 20x80 mmthreaded isi marked gi bend 90 degree 15 mm dia isi marked cp brass tee 90 degree of 15mm m seal phataphat small packet of 25 gram gi union socket 15 mm isi marked gi union socket 20 mm isi marked gi socket fully threaded 15 mm isi marked gi socket fully threaded 25 mm isi marked gi socket fully threaded 32 mm isi marked gi socket 50 mm gi bend semicircle 15x100 mm isi marked gi bend semicircle 20x100 mm isi marked gi socket reducer 20 x 15 mm gi socket reducer 25x15 mm gi socket reducer 25 x 20 mm gi elbow reducer 32x20 mm isi marked gi tee equal 15mm isi marked gi reducer elbow of size 20 x 15 mm isi marked gi bend metal threaded 90 degree 80 mm dia nut and bolt with washer 6mm dia 50mm long gi tee reducer 50x15 mm x 50 mm isi marked gi socket reducer 50 x 20 mm isi marked gi nipple 20mm galvanized iron pipe nipple gi threaded round union socket polished 50 mm dia gi union socket 3mm thick of 25mm isi marked gi union socket 3mm thick of 15mm isi marked gi tee 3mm thick of 25mm isi marked pvc angle l type polished beading of size 2x10mm x 8ft long pvc angle l type polished beading of size 3x8mm x 8ft long back for chair cb steel without arms back for chair cb steel with arms plain white viscose fabric of width 48 inches for clothing ms screw wood 30 mm mild steel 30 x 7 mm standard wood screws drum polish pkt of 100 pieces ms wood screws powder coated of size 20x 5mm pkt of 200 pieces crome polish wood screw of size 35x8mm pkt of 100 pieces min nails wire polished round 40mm size nails wire polished 3mm round 75mm size synthetic enamel paint briliant white glossy finish in 4 ltr pack container cloth acrylic linen basics homes velvet solid dyed fabric decorative soft smooth silky cloth for sofa 100 x 140 cm beige 1 mtr white square padlock alloy steel with 4 keys 6 levers door lock hacksaw resistant electroplated hardened steel 50mm pack of 1 cylinder housing brass lock 25mm dia bright nickel finish for wardrobe with 2 keys made of brass with 1 yr warranty sliding door lock with key for wardrobe 32 mm nickle silver finish pack of 1 painting brush synth hair flat mini size 12mm paint brush with acrylic nylon blend round bristles of size 25mm pack of 6 paint brush with acrylic nylon blend round bristles of size 50mm pack of 4 super sturdy bristles premium brushes and wooden handle easy clean long lasting painting brush set of 6 black total quantity : 3661...

Due Date : October 03, 2024

Tender Value : ₹ Ref. Documents

View Tender
10
Police Department - Bihar

45452292 auction sale of condemned material. iron folding stool iron kadhai with handle aluminum alloy aluminum kathuta 24 inch chadra kathauta aluminum deckcha 24 inch aluminum deckcha 20 inch ladle of iron 16 inches embroidery handle 22 inch ladle of iron 18 inches 18 inches tawa 24 inch bucket 14 inch steel plate steel spoon steel claw water drum bucket 12 inch chakla belena seal pounder iron fan lantern embroidery iron 24 inches cholni iron 36 inch...

Due Date : October 16, 2024

Tender Value : ₹ Ref. Documents

View Tender
11
East Central Railway - Bihar

45385241 auction sale of dms/scrap/gsd/ghz, lot no. 342402009, total weight 1814.4 kg, different types of non ferrous aluminium and its alloy and bronze scrap items which includes piston aluminium alloy, hsd glow rod, cooling fan pully, stabilizing valve, piston dia 197 mm, 127 mm, 100 mm, 90mm, 60 mm, wiper motor assembly, sa 9 valve, a 9 valve, pfg valve, c2 relay valve, bronze bearing piece, front cover, axle bearing for tm4601, valve wheel gun metal dia 50 mm, 40 mm. and other similar type items with or without ms/ss attachment. comp. broken damaged rusted etc. note aluminium and its alloyed 1056 kg, bronze 758.4 kg. approx. location under scrap godown near dispatch section....

Due Date : October 01, 2024

Tender Value : ₹ Ref. Documents

View Tender
12
Military Engineer Services - Bihar

45317672 tender for special repair to buildings no p 73 (urc bldg) at ota gaya; 1 excavating in trenches, n exc 1.5m wide & n exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan & getting out in hard/dense soil 2 excavating in trenches, n exc 1.5m wide & exc 1.5m but n exc 3.0m in depth; for fdn etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan & getting out in hard/dense soil 3 removing excavated soil n exc. 50m & depositing where directed at a level n exc. 1.5 m above the starting point 4 returning, filling in, incl spreading, levelling, watering & well ramming in layers n. exc 25 cm in soil. 5 m & l pcc in foundations, filling and mass concrete type d2 (1:4:8) using 40 mm graded stone aggregate 6 dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete. 7 demolition of concrete of any description and in any position not otherwise specifically provided for complete. 8 demolition ofreinforced cement concrete of any description and in any position not otherwise specifically provided for complete. 9 demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. 10 m & l brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cm 1:4 11 m & l for brickwork with fly ash bricks straight or curved on plan to any radius in half brick thick walls built in cm (1:4) 12 m & l rcc m 25 design mix using 20 mm graded aggregate in beams, cantilevers, lintels over 1.5 m span 13 m & l rcc m 25 design mix using 20 mm graded aggregate in foundations, incl rafts, footings, foundation beams; plinth beams; bases for columns and mass concrete 14 m & l rcc m 25 design mix using 20 mm graded aggregate in columns, pillars, piers, posts and struts 15 m&l rcc m 25 design mix using 20 mm graded aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like 16 form work to sides of concrete foundations, footings, bases of columns,sides & soffits of foundation & plinth beams and similar work rough finished surfaces of concrete flat 17 form work to sides of pillars, posts, struts, piers,columns, and stanchions rough finished surfaces of concrete square, rectangular or polygonal 18 formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; not exc. 200mm thick (horizontal or sloping) rough finished surfaces of concrete flat 19 m&l mild steel tmt bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality 20 ditto all as per item no 19 above but 6 to 8 mm dia as in spacers and binder 21 s & f of 4 mm thick hpsc (high pressure steam cured) pre primed textured designer board, water resistant, be placed in the grid system duly suspended with 2 mm dia gi bar hangers fixed with steel dash through fasteners from purlins of the roof complete all as specified. 22 m & l for anodised aluminium snap grid frame work for false ceiling all as specified and as directed. 23 m & l for chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and no pigments including 15mm thick sceed bed in cm 1:6 complete. 24 s & f of framed work as in including moulding, cuttings, and made to shape as directed, such as grills, gratings, etc with ends of bars shouldered and/or riveted or welded, or forged into spikes, framed guard bars and similar work conforming to fe.290. gde e 165 complete all as directed & specified. 25 m&l rendering 15mm thick in two coat on stone masonry surfaces or surface other than fair face of brickwork in cm (1:4) finished even & smooth (without using extra cement) and applying wpc on second coat @ 3% by wight of cement or manufacturere instruction 26 m&l rendering 10mm thick on stone masonry surfaces or surface fair face of brickwork in cm (1:6) finished even & smooth (without using extra cement) 27 m & l for hard core of broken bricks gauge n exc. 63mm, deposited, spread & levelled in layers n exc. 15 cm thick, watered & rammed to a true surface 28 m & l 75 mm thick pcc type c 2, (1:3:6) using 40mm graded stone aggregate as inpath and concrete surface finished even and smooth without using extra cement. 29 m & l 25mm thick pcc type b 1, (1:2:4) using 20mm graded stone aggregate as in levelling course for tiles complete. 30 m & l for virified ceramic light shade double charged tiles 7.5 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and incl 15mm thick screed bed or bedding layer with cm 1:4 complete. 31 m & l for virified ceramic light shade double charged tiles 7.5 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skitting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and incl 10mm thickrendering bed or bedding layer with cm 1:4 complete. 32 m&l rendering 10mm thick on fair faces of brick work or concrete surfaces in cm (1:3) in ceiling complete. 33 m & l for two coats of exterior weather proof paint white or tinted on walls, fascia of roof or chajjas, col facia at any height on old painted surfaces of brick, stone, concrete, asbestos cement or plastered or unplastered surfaces of bldg all as specified & directed.make : asian paints(apex dust proof) or equivalent paint. 34 m & l for preparation of new plastered surfaces and applying two coat of oil bound distemper over a coat of primer including 1mm thick putty complete all as specified and directed by engr in charge. 35 m & l for preparation of old plastered surfaces and applying two coat of oil bound distemper over a coat of primer including 1mm thick putty complete all as specified and directed by engr in charge. 36 m & l 75mm thick pcc type c 1, (1:3:6) using 40mm graded stone aggregate finished even & smooth without using extra cement as in plinth protection/path 37 taking down chowkhats or frames exceeding 1.50 sqm and not exceeding 4 sqm each but with shutters (without taking off shutters from the frame) complete all as specified. 38 s & f ofpressed steel frames 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed 39 s & f 30 mm flush shuteers solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. 40 s & f framed work as in doors or gates of angle or other section with gusset plates, rails,braces,etc.,complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing completeconforming to fe.290.gde e 165 41 material & labour for providing and fixing stainless steel (grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. 42 m&l two coat of synthetic enamel paint overnew woodensurfaces of any description not otherwise described over 10cm in width or grith over one coat of pink primerincluding preparation of surfaces complete. 43 m&l two coat of synthetic enamel paint overold woodensurfaces of any description not otherwise described over 10cm in width or grith over one coat of pink primerincluding preparation of surfaces complete. 44 m&l two coat of syntetic enamel paint overnewsteel surface of any description over 10cm in width or grithnot otherwise describedover one coat red oxide primerincluding preparation of surfaces complete. 45 s & f for powder coated aluminium frame for doors,windows, ventilators with one or morerebates including joining cleat for fixing etc. complete all as specified and directed. 46 s & f aluminium handle cast type anodized 150mm size 47 s & f aluminium, anodized, barrel tower bolts of extruded section 200mm long 48 s&f butt hinge extruded aluminum alloy with galvanized ms hinge pin anodised and fixed 125mm long, type b 21 complete. 49 s & f aluminum alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy size 300mm long. 50 m&l for pcc 1:2:4, type b 1 using 20 mm graded stone aggregate as in coping, benching, bed block, lintel band, plinth courses, drains and channels etc including necessary form work complete 51 taking down existing old extg unserviceable lt ug/ service cable of any description and sizecomplete all as specified and directed. 52 supply and laying & testing and commisioning lt underground cable 1100 volts grade, xlpeinsulated and pvc sheathed heavy duty armoured with multi staranded aluminium conductor laid in pipes, trenches/ ducts, on poles etc of sizecomplete all as specified and directed 53 (a) 3.5 core x 120 sqmm 54 (b) 3.5 core x 35 sqmm 55 removing of surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed. 56 burnt bricks sub class b laid flat dry across the cable for cable protection all as specified and directed. 57 sand cushioning to ug cable 8cm thick before laying the cable and 15cm above the cable, stretching and testing of cable complete all as specified and directed. note: (i) consolidated / punned sand shall be considered for purpose of payment (ii) sand shall be same as specified for plastering work. 58 s & f outdoor type lt feeder piller box of size 600x600x300mm deep, 415 volts, 3 phase, 4 wire 50 hz having 04 nos colour coded aluminium bus bar of capacity 600 amps mounted on porcelain/ hygroscopic insulators with suitable number of holes for making connections of cables, made out of 3.15mm thick sheet steel crca and mounted on frame of suitable size made out of angle iron 50x50x6mm with 4 nos legs embedded in pcc foundation 300mm below ground level and 300mm above ground level, duly painted internally and externally with two coats of synthetic enamel paint over a coat of red oxide primer, dust and vermin proof, front door with locking arrangement and two earth points by side of the box, cubical type with cable glands, sockets etc and with provision of cable entry from bottom, including painting steel frame complete all as specified. 59 m & l for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to gi earth strip 25x4mm by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, pcc chamber, ci frame and cover, ms funnel with wire mesh all as shown in electrical plate no 3 of ssr part i including excavation and earthwork in any type ofsoil/strata and testing on completion. note: gi earth strip 25x4 mm and 40 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted. 60 taking down copper/aluminium point wiring (light, fan, bell, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendent, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc complete all as specified and directed at site. 61 taking down ceiling fan/ exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan bladesand deposit to mes store yard of age e/m gaya complete all as specified and directed. 62 m&l for point wiring with 1.5 sq mm single core pvc insulated unsheathed copper frls multi stranded conductor cable in and including concealed pvc conduit of size 20/25mm isi marked inclusive oftees, bend, elbows etc upto and including sunk in anodized pressed steel box for housing switch socket etc withwhite laminated 3 mm thick hylum sheet cover isi marked of suitable size complete including pvc insulated multi stranded copper conductor 1.5sq mm frls cable as earth wire to common earth dolly for connection to ceiling rose to earth terminalincluding cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed by engr in charge for following : 63 (a) one light point controlled by one, one way switch 5 amps 64 (b) one fan point/ exhaust fan point controlled by one, one way switch 5 amps. 65 (c) one 3 point 5 amps switch socket outlet point controlled by one switch on the same board. 66 (d) one 3 pin 5 amps switch socket outlet point controlled by one switch on independent board. 67 description all as per item no.3 here in before but using 2.5 sqmm single core copper conductor cable of multistranded flame retardant pvc insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor flame retardant pvc wire as earth continuity conductor along with wiring and connecting to the common earth dolly. 68 description all as per item no.3 here in before but using 4.0 sqmm single core copper conductor frlsh cable of multistranded pvc insulated unsheathed 1100 volts grade for 5/15 amps switch socket combination point including necessary running of4.0 sqmm frlsh pvc insulated copper conductor cable as earth continuity conductor along with wiring and connecting to the common eath dolly. (for ac point) 69 s&f switch piano type single pole 5 amp, 230 volts complete all as specified and directed. 70 s&f switch piano type single pole 15 amp, 230 volts complete all as specified and directed. 71 s&f socket outlet 2 in 1, 3 pin, 5 amp, 230 volts complete all as specified and directed. 72 s&f socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type, 230 volts complete all as specified. 73 s&f ceiling rose, surface bakelite with 3 terminals, isimarked for batten fitting complete all as specified 74 s&f stepped type electronic fan regulator flush type complete all as specified and directed. 75 s&f lamp holder, pvc / polycarbonate type with back plate suitable for batten/ slanting fittings complete all as specified and directed. 76 s&f metal clad box suitable for 230 volt 50 hz ac supplywith 16 amp socket, mcb sp 20/32 amps and 16 amp plug top including removal of old unserviceable one complete all as specified and as directed. 77 m & l for sub main wiring with approved colour coding as per is with two single core pvc insulated frls cable with stranded copper conductor of size 6 sq mm nominal area and drawing into suitable size of pvc non metallic rigid heavy duty pvc conduit of white/ ivory colour and its accessaries isi marked heavy duty of suitable size including concealed in wall etcone run of pvc insulated with 6.0 sqmm (nominal area) stranded copper conductor frls cable as earth wire complete all as specified and as directed. note: two runs of 6 sqmm cable, one run of 6 sqmm cable and one run of pvc conduit will be measured as one unit 78 m & l for sheet metal enclosure mccb dbs, triple pole & neutral 4 way with 200 amp rated bus bar double door suitable for 01 no incoming mccb of 125 amp capacity and 12 nosout going mcb sp complete all as specified and directed. note: mccb & mcbs are measured and paid in separate items. 79 s & f sheet metal enclosure mcb db spn 8 way with 200 amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the dbs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. 80 s & f for mcb single pole and neutral rated capacity 32 amps, 240 volts breaking capacity 10 ka, c curve complete all as specified and as directed. 81 s & ffor mcb single pole rated capacity 6 to 32 amps, 240 volts breaking capacity 10 ka, c curve complete all as specified and as directed. 82 s & f mccb 4 pole, 125 amps with breaking capacity 16 ka, 415 volts complete all as specified and directed. 83 s & f ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 v, 1200 mm sweep, min air delivery 210 cfm with service value 6.00 bee five star rated with brushless direct current motor (bldc) including electrical connections from ceiling rose to fan terminal complete all as specified and directed. 84 labour hanging only ceiling fan obtained from item no. 2 above and connecting up including provision of 3 core pvc insulated pvc sheathed multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal and m & l for painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as specified and directed. 85 s & f for wall mounted led tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouputboxtype fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired andnecessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. 86 supply and fixing led luminaire 600 mm x 600 mm, 35/36 watt, 220 v ac recessed type with high efficiency pmma diffuser soft glare free light complete with driver, holders & led lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. 87 s & f led street light fitting 35 watt 230 v ac outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with ip 65/66 protection complete necessary mounting arrangements and provision of 0.75 sqmm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia gi pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by engineer in charge. 88 s & f exhaust fan, steel body ac single phase 230v of size 300mm sweep with, blades, and frame and louvers with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of pvc flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection complete all as specified and directed. 89 m & l for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to gi earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, pcc chamber, ci frame and cover, ms funnel with wire mesh all as shown in electrical plate no 3 of ssr part i including excavation and earthwork in any type ofsoil/strata and testing on completion. note: gi earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted. ...

Due Date : October 03, 2024

Tender Value : ₹ Ref. Documents

View Tender
13
Patna Dairy - Bihar

45189369 tender for aluminium alloy milk can with lid capacity 40 itr isi marked with punching on neck & lid wt. of can 6.5 kg...

Due Date : September 24, 2024

Tender Value : ₹ Ref. Documents

View Tender
14
Northeast Frontier Railway - Bihar

44691207 supply of aluminium single ladder 9.14 meter (30 feet with hook on top) long without joint aluminium ladder made out of high tensile aluminium alloyaluminium single ladder 9.14 meter (30 feet with hook on top) long without joint aluminium ladder made out of high tensile aluminium alloy,aluminium single ladder 9.14 meter (30 feet with hook on top) long withou t joint aluminium ladder made out of high tensile aluminium alloy c section as per i s 773/1983 of size: 66.6 mm x 31.8 mm thickness of section 4 mm with step 25.4 mm dia. alum inium non slippery corrugated pipe at 10 center double rivited to chhannel to ens ure maximum safety. steps must be strong enough to support at a time weight of 2 men (140 kg) with warranty as per is 4571/1977 & rubber shoes to be fitted on both ends. make sumer, skyward, sj, king or similar [ warranty period: 30 months after the date of delivery ] ] , aluminium single ladder 9.14 meter (30 feet with hook on top) long withou t jointaluminium ladder made out of high tensile aluminium alloy c section as per is 773/1983 ofsize: 66.6 mm x 31.8 mm thickness of section 4 mm with step 25.4 mm dia. alumini um non slipperycorrugated pipe at 10 center double rivited to chhannel to ensure maximum safety. stepsmust be strong enough to support at a time weight of 2 men ( 140 kg) with warranty as per is4571/1977 & rubber shoes to be fitted on both ends. make sume r, skyward, sj, king or similar [ warranty period: 30 months after the date of delivery ] ] => limited...

Due Date : August 16, 2024

Tender Value : ₹ Ref. Documents

View Tender
15
East Central Railway - Bihar

44475356 auction sale of dms/scrap/gsd/ghz, lot no. 342402009, total weight 1814.4 kg, different types of non ferrous aluminium and its alloy and bronze scrap items which includes piston aluminium alloy, hsd glow rod, cooling fan pully, stabilizing valve, piston dia 197 mm, 127 mm, 100 mm, 90mm, 60 mm, wiper motor assembly, sa 9 valve, a 9 valve, pfg valve, c2 relay valve, bronze bearing piece, front cover, axle bearing for tm4601, valve wheel gun metal dia 50 mm, 40 mm. and other similar type items with or without ms/ss attachment. comp. broken damaged rusted etc. note aluminium and its alloyed 1056 kg, bronze 758.4 kg. approx. location under scrap godown near dispatch section....

Due Date : August 06, 2024

Tender Value : ₹ Ref. Documents

View Tender
16
Northeast Frontier Railway - Bihar

44473208 supply of gravity cockgravity cock,gravity cock as per drg.no. icf drawing no: icf/ sk 6 3 369, alt f/2 item 1, specn: material spe cification : aluminium alloy. [ warranty period: 30 months after the date of delivery ] ] => limited...

Due Date : August 06, 2024

Tender Value : ₹ Ref. Documents

View Tender
17
Patna Dairy - Bihar

44360548 tender for aluminium alloy milk can with lid capacity 40 ltr isi marked with punching on neck & lid wt. of can 6.5 kg wt. of lid 800 900 gm...

Due Date : August 04, 2024

Tender Value : ₹ Ref. Documents

View Tender
18
East Central Railway - Bihar

44109495 supply of nylon rope laddernylon rope ladder,nylon rope ladder complete with 1 dia. aluminum steps as per design. nylon rope of 25 mm dia. w ith steps of 25 mm dia. aluminum alloy corrugated tubing spaced at 12 c/c spaced duly packed on both sides siz e 20 feet long with hook for hanging, make sumer or similar. [ warranty period: 30 months after the date of d elivery ]...

Due Date : July 16, 2024

Tender Value : ₹ Ref. Documents

View Tender
19
Patna Dairy - Bihar

43299851 tender for aluminium can with lid & aluminium alloy milk can alurninium can with lid 40 ltrs isi mark wt. 6.5 kg can aluminium alloy milk can lid wt. 800 900gm lid...

Due Date : May 17, 2024

Tender Value : ₹ Ref. Documents

View Tender
20
Patna Dairy - Bihar

43013708 quotation for aluminium alloy milk can with lid capacity 40 ltr isi marked with punching on neck & lid...

Due Date : April 02, 2024

Tender Value : ₹ Ref. Documents

View Tender
21
Bihar Industrial Area Development Authority - Bihar

42999173 request for proposal ( rfp ) for selection of firm / agency / supplier for supply, installation, testing and commissioning of different machines including civil, electrical and other fixtures for setting up food testing lab in upendra maharathi shilp anusandhan sansthan, patna, bihar. list of proposed equipment – chemical 1 highly sensitive triple quadrupole lcms / ms system 2 gas chromatographs with ecd, fid, fpd detector, with headspace and auto sampler ( auto sampler to be provided ) with 5 years consumable and warranty extended upto 5 years 3 gc ms ms with ecd, fid, fpd detector, with headspace and auto sampler ( auto sampler to be provided ) with 5 years consumable and warranty extended upto 5 years 4 icpms accessories and microwave digestion system 5 double beam atomic absorption spectrophotometer 6 high performance liquid chromatography ( gradient ) with uv and fld detector, auto sampler & essential columns with accessories with 5 years consumable and warranty extended upto 5 years 7 uv vis spectrophotometer 8 centrifuge with 5 years consumable and warranty extended upto 5 years 9 ultra low temperature 80 ult freezer 10 ph meter with 5 years consumable and warranty extended upto 5 years 11 elisa reader, filter based plate reader with 5 years consumable and warranty extended upto 5 years 12 heating mantles with 5 years consumable and warranty extended upto 5 years 13 laboratory precision oven uniform temperature 300 o c with 5 years consumable and warranty extended upto 5 years 14 cyclotec lab grinding millwith 5 years consumable and warranty extended upto 5 years 15 magnetic stirrer with 5 years consumable and warranty extended upto 5 years 16 magnetic stirrer with hotplate with 5 years consumable and warranty extended upto 5 years 17 block digestor for eight samples with 5 years consumable and warranty extended upto 5 years 18 moisture analyzer with 5 years consumable and warranty extended upto 5 years 19 muffle furnace 930 degree c with 5 years consumable and warranty extended upto 5 years 20 rectangular hot plate with 5 years consumable and warranty extended upto 5 years 21 refrigerated microcentrifuge with 5 years consumable and warranty extended upto 5 years 22 refrigerators, 2 to 8degreec, capacity 1000l with smart view with 5 years consumable and warranty extended upto 5 years 23 refrigerated incubator orbital shaker ( stackable ) with 5 years consumable and warranty extended upto 5 years 24 soxhlet extraction unit with 5 years consumable and warranty extended upto 5 years 25 nitrogen concentrator ( turbo vap. concentrator ) with 5 years consumable and warranty extended upto 5 years 26 solid phase extraction manifold with 5 years consumable and warranty extended upto 5 years 27 vaccum fitration apparatus along with vaccum pump with 5 years consumable and warranty extended upto 5 years 28 multi tube vortex with mixing, heating, and cooling functions with 5 years consumable and warranty extended upto 5 years 29 analytical weight box, e2 with 5 years consumable and warranty extended upto 5 years 30 analytical weight box, e2, with 5 years consumable and warranty extended upto 5 years 31 analytical balance, 220g x 0.1mg with internal calibration with 5 years consumable and warranty extended upto 5 years 32 microbalance, 5.2g x 0.001mg with internal calibration and static eliminator with 5 years consumable and warranty extended upto 5 years 33 precision balance, 6200g x 0.1 with external calibration with 5 years consumable and warranty extended upto 5 years 34 micro pipette, 30 300 μl, eppendorf with 5 years consumable and warranty extended upto 5 years 35 micropipette, 1 to 10 ml, eppendorf with 5 years consumable and warranty extended upto 5 years 36 micro pipette, 2 to 20 μl, eppendorf with 5 years consumable and warranty extended upto 5 years 37 micro pipette, 10 to 100 μl, eppendorf with 5 years consumable and warranty extended upto 5 years 38 micro pipette, 20 to 200 μl, eppendorf with 5 years consumable and warranty extended upto 5 years 39 micro pipette, 100 to 1000 μl, eppendorf with 5 years consumable and warranty extended upto 5 years 40 rotary vacuum evaporator along with heating bath, diaphragm pump, interface and recirculating chiller rotary evaporator and heating bath with 5 years consumable and warranty extended upto 5 years 41 digital stop watch list of proposed equipment – biological 1 real time pcr system with 5 years consumable and warranty extended upto 5 years 2 b.o.d cooling incubators with 5 years consumable and warranty extended upto 5 years 3 vertical laboratory autoclave ( radial locking ) with 5 years consumable and warranty extended upto 5 years 4 laboratory precision oven uniform temperature 300 o c with 5 years consumable and warranty extended upto 5 years 5 horizontal laminar air flow with 5 years consumable and warranty extended upto 5 years 6 digital top pan balance ( 20 gm 800 gm ) , with 5 years consumable and warranty extended up to 5 years 7 analytical balance ( 0.01mg 20 gm ) , with 5 years consumable and warranty extended upto 5 years 8 stability chamber with 5 years consumable and warranty extended upto 5 years 9 biosafety cabinet type ii b, with 5 years consumable and warranty extended upto 5 years 10 deep freezer 20°c, with 5 years consumable and warranty extended upto 5 years olsc 119 12 11 stomacher, with 5 years consumable and warranty extended upto 5 years 12 homogenizer / lab stirrer, with 5 years consumable and warranty extended upto 5 years outer & inner ss 13 ph meter, with 5 years consumable and warranty extended upto 5 years 14 lab grinding mill ( homogenizer ) with 5 years consumable and warranty extended upto 5 years olsc ls 01 15 vortex mixer, with 5 years consumable and warranty extended upto 5 years 16 refrigerated microcentrifuge with 5 years consumable and warranty extended upto 5 years 17 non refrigerated microcentrifuge with 5 years consumable and warranty extended upto 5 years 18 gel documentation system with printer, with 5 years consumable and warranty extended upto 5 years 19 biosafety cabinet type ii b, with 5 years consumable and warranty extended upto 5 years 20 sonicator, with 5 years consumable and warranty extended upto 5 years 21 binocular microscope / 3d microscope, with 5 years consumable and warranty extended upto 5 years 22 uv cabinet, with 5 years consumable and warranty extended upto 5 years 23 serological water bath, with 5 years consumable and warranty extended upto 5 years 24 electronic colony counter with 5 years consumable and warranty extended upto 5 years proposed cost for furniture and fixture for setting up of testing lab, dept. of industries 1 wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm fr pvc insulated copper conductor single core cable in surface / recessed pvc conduit, with modular type switch, modular plate, suitable size g.i. box and earthing the point with 1.5 sq.mm. fr pvc insulated copper conductor single core cable etc.as required group c 2 wiring for light / power plug with 2x4 sq.mm fr pvc insulated copper conductor single core cable in surface / recessed medium class pvc conduit along with 1 no 4 sq.mm. fr pvc insulated copper conductor single core cable for loop earthing as required. 3 wiring for circuit / submain wiring along with earth wire with the following sizes of fr pvc insulated copper conductor, single core cable in surface / recessed pvc conduit as required. 2x2.5 sq.mm +1x2.5 sq.mm 2 x 6 sq.mm + 1 x 6 sq.mm. earth wire 2 x 10 sq.mm. + 1 x 10 sq.mm. earth wire 4 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire 4 x 6 sq. mm + 1 x 6 sq. mm earth wire 4 x 10 sq. mm + 1 x 10 sq. mm earth wire 4 x 16 sq. mm + 1 x 16 sq. mm earth wire 4 supplying and fixing pvc / g.i box of 200mm x 250mm x 60mm deep on surface or in recess with suitable size of phenolic laminated sheet cover in fornt including painting etc as required ( adopter box above each d.b ) . 5 supplying and fixing suitable gi box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pinm 5 / 6 and 15 / 16 amps modular socket outlet and 15 / 16 amps modular switch, connection, painting etc. as required. ( for power plug ) 6 supplying and fixing suitable size g.i box with modular plate and cover in front on surface in recess including providing and fixing 3 pin, 5 / 6 amps modular socket outlet and 5 / 6 amps modular type switch, connection, painting etc., as required. ( for light plugs to be used in non residential buildings ) 7 supply & fixing 8 way double door sp & n, sheet steel, mcb distribution board, 240 volts, on surface / in recess, complete with tinned copper busbar, neutral link, earth bar, din bar, detachable gland plate, interconnections, phosphatised and powder painted including earthing etc.as required ( but without mcb / rccb / isolator ) lighting db ( a ) 40 amps double pole mcb isolator : 1 no. ( b ) outgoing 6 / 32 amps sp mcb ( b series ) :6 nos. 8 supply & fixing 4 way ( 4+12 ) double door tp & n, sheet steel, mcb distribution board, 415 volts, on surface / in recess, complete with tinned copper busbar, neutral link, earth bar, din bar, detachable gland plate, interconnections, phosphatised and powder painted including earthing etc.as required ( but without mcb / rccb / isolator ) power db ( a ) 63 amps double pole mcb isolator : 1 no. 9 ( b ) outgoing 16 / 32 amps sp mcb ( c series ) : 12 nos. s / f following modular type switch / socket on the existing modular plate and switch box including connection but excluding modular plate etc as required. 10 tv antenna socket outlet 11 s / f electronics musical call bell suitable for d.c / a.c. single phase 230 copmplete as required. 12 supplying and fixing batten / angle holder incluiding connection etc as required. 13 supplying and fixing 2 pin, 5 amp, celling rose on the existing junction box / pvc box incluiding connection etc as required. 14 s / f modular blanking plate on the existing modular plate and switch box excluding modular plate as required. 15 supplying and drawing co axial tv cable rg 6 grade, 0.7 mm solid copper conductor pe insulated, shielded with fine tinned copper braid and protected with pvc sheath in the existing surface / recessed steel / pvc conduit as required. electrical fixture fitting 16 supply and installation of 300 mm 230volt ac exhaust fan in the existing opening including making good the damage connection testing commissioning etc as required. 17 supply & installation 400 mm dia 230 volt ac wall / cabin fan including fixing the bracket making connection testing commissioning etc as required. 18 supply and fixing recess mounted 18 watt led vertical downlighter complete with all accessories and replaceable electronic driver directly on false ceiling including connection with 1.5 sq mm fr insulated copper conductor cable and earthing the body etc as required 19 supplying and fixing indoor recess mounting 36 watt led flat panel luminaire suitable for armstrong / grid ceiling and complete with electronic driver etc. directly on false ceiling including connection with 1.5 sqmm fr pvc insulated copper conductor cable and earthing the body etc as required. 20 supplying and fixing of following types lamp in the existing electrical fitting / fixtures etc. as required. 10 / 12 watt led lamp 21 supplying and fixing 90 watt led type street light with die cast aluminium housing for ingress protection of ip65 and complete with all accessories etc, on pole / building including connection with fr pvc insulated copper conductor cable and earthing the body etc. as required. 22 supplying and fixing following sizes of pvc conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required. section 4: fire extinguishers p / f with brackets wall mounted fire extinguishers as per details below: 23 abc power type ( stored pressure ) fire extinuisher 4 kg .capacity , isimark ( is: 15683 ) squeeze gripe valve, operating temperature ( +5 deg. to ( +55 ) deg.for class 3a type of fire with abc powder , complete in all respect. 24 co2 type fire extinguisher 4.5kg capacity isi mark ( is : 15683 ) squeeze grip value , operating temperature ( 30deg. to 55deg.foe class 13b type of fire fitted with 1mt.hose & pvc hoen, complete in all respect. earthing 25 providing and fixing 25 mm x 5 mm copper strip on surface or in recess for connections etc. as required. 26 providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface / recessed conduit / submain wiring / cable as required. 27 providing chemical / mineral maintenance free earthing system comprising of copper coated earth electrode 3 metre length and 17.2 mm outer dia along with 25 kg earth conductivity enhancing back fill mineral compound for earth electrode to fill up the excavated earth and earth inspection pit etc. as required. 28 providing and fixing copper tape 20 mm x 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( for horizontal run ) 29 providing and fixing copper tape 20 mm x 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( for vertical run ) air condition 30 2 ton inverter cassette ac 5 star inverter ( make: mitsubisi / daikin / toshiba / o general ) noise level indoor ( low / mid2 / mid1 / high ) in db ( a ) not below 45 / 49 / 51.outdoor in not below 54 db ( a ) 31 1.5 ton 5 star inverter split ac ( make: mitsubisi / daikin / toshiba / o general ) noise level indoor ( low / mid2 / mid1 / high ) in db ( a ) not below 45 / 49 / 51.outdoor in not below 54 db ( a ) stablizer ( voltage range: ( 90v to 230 v ) extra copper pipe & electrical wires pvc pipe for drain water fire fighting 32 supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices ( including detectors ) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics / lcd display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory ( eprom ) , power supply unit ( 230± 5% v, 50 hz ) , 48 hrs back up with 24 volt sealed maintenance free batteries with automatic charger. the panel shall have facility to connect printer to printout log and facility to have seamless integration with analog / digital voice evacuation system ( which is part of the schedule of work under sh: pa system ) and shall be complete with all accessories. the panel shall be compatible for ibms system with open protocol bacnet / modbus over ip complete as per specifications. ( edwards est ) 1 loop panel. 1 kva line interactive ups with 30 min battery back up 33 supplying and fixing intelligent addressable type multicriteria detector with base for use as heat or smoke or combined both with automatic electronic addressing, microprocessor type with builtin integrated short circuit isolator including testing, commissiong etc as reqd. 34 supplying and fixing intelligent addressable type heat detector with base with automatic electronic addressing, microprocessor type with builtin integrated short circuit isolator including testing, commissiong etc as reqd. 35 sypplying and fixing intelligent addressable manual call point having inbuilt short circuit isolator i / c testing and commissiong etc as reqd. 36 addressable sounder with interface module, power supply for sonder and programmable by software having integrated short circuit isolator & having operating temperature 10⁰c to + 55⁰c 37 analogue addressable control module with ip66 casing containing four relay outputs, each containing a potential free dpdt contact with a fail safe and in built short circuit isolator the ambient temperature range shall be 20c to +60c. 37 analogue addressable monitor module with ip66 casing containing four relayinputs, each containing a potential free dpdt contact with a fail safe and in built short circuit isolator the ambient temperature range shall be 20c to +60c. duel led response indicator ( local ) 38 supplying and fixing of following sizes of medium class pvc conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required. ( malhotra / anchor ) 20 mm dia 39 supplying & drawing following sizes of fr pvc insulated copper conductor single core cables in existing surface / recessed pvc conduit etc. as complete as required ( polycab / havels ) 2 x 1.5 sq.mm 40 kanex brand abc type fire extinguisher cap. 6 kg filled with mono ammonium phosphate powder 50% confirms to is 4308, stored pressure type, ugts pressure gauge, gross weight 8.9 kg, empty weight 2.9 kg, can height 530 mm, diameter 150 ± 10mm, discharge time 24 sec, controllable discharge mechanism, jet range 5 meters, average discharge is 90%, applicable on class a, b & c and electrically started fire, fire rating 4a:144b, can construction : deep drawn & co2 mig welded, epdm rubber hose with both end aluminum clamped, internal coating epoxy powder coating, external coating pure polyester powder coating ( uv resistant ) , brass forged valves with safety pin is of ss material, sheet metal thickness : 1.8 mm, isi approved is 15683:2018. 41 kanex brand co2 high pressure portable 4.5 kg fire extinguisher, filled with co2 gas as per is 15222, gross weight 16.4, empty weight 11.9 kg, control discharge mechanism fitted with 1 meter wire braided hose & flat horn with diffuser nozzle for dispersed discharge of co2, discharge time 12 sec, average discharge is 95%, applicable on class b, c and electrically started fire, fire rating 55b, internal coating is not applicable & external coating is of enamel spray painting, powder coated handle, squeeze grip type valve confirm to is 3224 isi marked, co2 cylinder construction: hot spinning by seamless pipes & bearing isi mark, body confirms to is 7285 and peso approved, extinguishers confirmed to is 15683:2018 and isi marked. 42 clean agent 2 kg fire extinguishers filled with hfc based gas electrically nonconductive non corrosive, colorless and non residual gas, applicable classes a, b, c, and electrical fires, ugts pressure gauge, gross weight 3.6 kg, empty weight 1.6 kg, height 380mm, diameter 106 ± 10mm, discharge time 12 sec, controllable discharge mechanism, jet range 3 meters, average discharge is 95%, deep drawn with mig welding technology, epdm rubber hose with special aluminum discharge nozzle, external coating pure polyester powder ( uv resistant ) , internal coating epoxy polyester powder, brass forged valves with safety pin is of ss material, fire rating 1a:21b, confirms to is 15683 & isi marked. 43 supplyy, installation, testing & commissioning of 5 lb capacity novec1230 dlp assembly with automatic valve push in connector for tube 5lb novec 1230 gas mounting bracket end linear adopter and low pressure switch for monitoring system activation. : kanex / fire trace 44 supply, installation, testing and commissioning of linear pneumatic heat detection tube with all necessary fitting and supports. ( rotarex / fire trace ) 45 supply, installation, testing & commissioning of audio visual alarm. : kanex / fire trace 46 automatic type 5 kg fire extinguishers hfc 236fa, applicable fire classes a, b & c, ugts pressure gauge, empty weight 2.64 kg, full weight 7.64 kg, can height 375mm, diameter 230 ± 10mm, sheet metal thickness : 2 mm, body construction deep drawn with mig welding technology, brass forged sprinkler valves with nozzle is specially designed to give more than 99% discharge. together with orifice characteristic to cover adequately fire risks with scattering cone of 40 to 45° angle. external pure polyester ( uv resistant ) and internal epoxy polyester powder coated, heat sensitive glass bulb of 68 °c. area covered will be 2 2.5 m2 and volume of coverage is 7 m3. brand : kanex cctv 47 network switch: 24 x 10 / 100 / 1000base t, poe, fixed, 2 x sfp 100 / 1000 mbps, 52 gbps sitching performance capacity, 39 mbps forwarding performance rate. 525 k byte packet buffer, 8k mac address table. 9k bytejumbo frame, 170 watt poe power. 48 bullet camera : 1 / 3 3 megapixel progressive scan cmos, pixels 2304 ( h ) x 1296 ( v ) , electronic shutter speed automanual, 1 / 3 ( 4 ) 1 / 100000s, min illumination 0.1 lux, f1.4 ( color ) ; 0 lux ( ir leds on ) , ir distance upto 100 ft ( 30 m ) , depending upon scene reflectance.day / night auto ( icr ) / color / bw, backlight compensation blc / hlc / dwdr , white balance auto / manual, gain control auto / manual, noise reduction3d, privacy masking upto 4 areas, lens focal length 2.7 12mm, max, aperture f1.4, focus control auto , horizontal angle of view 86 28 degree, lens type motorized focus / zoom, video compression h 264 ( main / high / baseline profile ) / mjpeg, resolution 3 mp ( 2304 x 1296 ) , 1080p ( 1920x1080 ) , 720p ( 1280x720 ) , d1 ( 704x576 / 704x480 ) , cif ( 352x288 / 352x240 ) , frame rate main stream 3 mp ( 1 20 fps ) , 1080p ( 1 25 / 30 fps ) , frame rate 49 dome camera: image sensor 1 / 3 3 magapixel progressive scan cmos, effective pixels 2304 ( h ) x 1296 ( v ) , electronic shutter speed min. illumination 0.045 lux, f2.1 ( color ) , 0 lux ( ir leds on ) , ir distance upto 100 ft ( 30 m ) , depending on scene reflectance, day / night auto ( icr ) / color / bw, backlight compensation blc / hlc / dwdr, white balance, auto / manual, gain control auto / manual, noise reduction 3d, privacy masking upto 4 areas, focal length 2.8mm, max. aperture f2.1, horizontal angle of view 92degree, lens type fixed, video compression h264 ( main / high / baseline profile ) / mjpeg, resolution 3mp ( 2304x1296 ) , 1080p ( 1920x1080 ) , 720p ( 1280x720 ) , d1 ( 704x576 / 704x480 ) 50 video recorder: simultaneous multi channel live view, real time recording, playback, network operation, remote access, usb backup, user interface support 16 bit true color graphical menu interface and mouse operation.preview screen 1 / 4 / 8 / 16 / 24 windows, ip video input 24 channels, video standard pal ( 625 line, 50t / s ) , ntsc ( 525 line, 60t / s ) , video compression h264 high profile, display moitor d1;vga & hdmi, hd ( support 1920x1080, 1280x720, 1440x900, 1260x1024, 1024x768, 800x600 ) 51 display: screen size 42 inch or above ( lg / sony / samsung / philips ) , panel technology ips, aspect ratio 16:9, native resolution 1920x1080 ( fhd ) , brightness 350nit or higher, contrast ratio 1100:1 or higher, dynamic cr 500, 000:1 or higher, viewing angle ( hxv ) 178x178, orientation portrait & landscape, operation temperature 0 degree c to 40 degree c, safety ul, eul, emc fcc class a, ip video unit 16 channel, 1 ch, rca ( 2.0 vp p, 1kohm ) two way audio input, 100 mbps incoming bandwidth, 80 mbps bandwidth, 128 remote connection, hdmi / vga output : 1 ch, resolution hard disk 4 tb camera installation and connectivity telephone 52 epabx with 50 line extension up to 80 line with 2 slt / 2 console the equipment shall be electronic type. it shall have microprocessor / micro controller based.it shall employ pcm / tdm / ip, 100% non blocking, ip digital switching technology.it shall have distributed processing architecture, slic and smt design.system power supply should be in built and smps type which input which input ranges from 90 – 265 vac, 48 60 hz & it has to be battery charger circuit inbuilt, so that, in case of power failure the psu can automatically switch to battery and vice versa. it should be suitable for dtmf as well as fsk type of telephone instruments.its capacity shall be suitable for maximum 96 numbers of c.o. lines, 120 analog extension lines and 500 ip extensions. 53 supply, installation, testing & commissioning of termination box for 50 pair epabx system complete as required 54 base phone cli ( panasonic / beetal ) landline phone with caller id facility corded phone numerical keypad 35 call logs3 display lines disclaimer, tone / pulse switchable ring led indication flash pause dynamic change over from pulse tone, 1 year manufacturer warranty 55 digital console phone 56 network switch : 24 x 10 / 100 / 1000base t, poe, fixed, 2 x sfp 100 / 1000 mbps, 52 gbps sitching performance capacity, 39 mbps forwarding performance rate, 525 k byte packet buffer, 8k mac address table, 9k byte jumbo frame, 170 watt poe power. 57 smart ups on line, 5.4 kw / 6 kva with 1 hour backup12 v 65 ah smf battery ups toplogy double conversion on line, power rating ( va / watts ) 5400watts / 6000va, form factor rack / tower convertible; output power capacity 5400 watts / 6000 va, max configurable power 5400watts / 6000va, nominal output voltage 230v, output voltage note configurable for 220 : 230 or 240 nominal output voltage, efficiency at full load 94.00%, output voltage distortion less than 3%, output frequency ( sync to mains ) 50 / 60 hz + / 3 hz, crest factor 03:01, waveform type sine wave, output connections ( 1 ) *hard wire 3 wire ( 8 ) * ( h n + g ) iec 320 c13 ( 8 ) , bypass built in bypass, output short circuit protection yes, parallel redundancy ( option ) 1 + 1, nominal input voltage 230v, input power factor>0.98, input frequency 40 70hz, input connections terminal block, protection thermal circuit breaker ( 250vac / 20a ) , input voltage range for main operations full load 160 285v, input voltage range for mains operation half load 160 285v, high voltage withstand capability 420 vac, green mode range 210 250 vac ( 230 v ) , battery type mintenance free sealed lead acid battery with suspended, electrolyte. 12v 65 ah smf battery for 60 min battery back up. 58 supplying and drawing following pair 0.5 sq. mm fr pvc insulated annealed copper conductor, unarmoured telephone cable in the existing surface / recessed pvc conduit as required. 2 pair networking 59 supplying & fixing rj 45 type computer socket suitable for cat 6 on modue gi box along with base and cover plate in surface or in recess including making connection , soldering etc as required. supplying and drawing utp 4 pair cat 6 lan cable patch cord 1 meter patch cord 2 meter 60 24 port gbe smart managed switch with gbe uplink interfaces 24 ports 10 / 100 / 1000mbps+4 sfp;port standards & functions ieee 802.3 10base t ethernet ( twisted pair copper ) , ieee 802.3u 100basetx fast ethernet ( twisted pair copper ) , ieee 802.3ab 1000base t gigabit ethernet ( twisted pair copper ) , ieee 802.3az compliance autonegotiation, ieee 802.3x flow control; full / half duplex full / half duplex for 10 / 100 mbps speeds, full duplex for gigabit speed;media interface exchange auto mdi / mdix adjustment for all twisted pair ports;switching capacity 56 gbps; transmission method store and forward; mac address table 16, 000 entries per device, maximum 64 bytes packet forwarding rate 41.7 mpps, packet buffer memory 1.5 mb, maximum power consumption 22.45 watts, standby power consumption 17.84 w / 240 v, acoustics 0 dba heat dissipation 76.55 btu / hr certifications ce ( lvd ) 61 category 6, utp 24 port patch panel size 482.6mm x 44.2 ( 19’’ x 1u ) , panel material steel fully powder coated, unshielded rj 45, plug insertion cycle 750 times dc resistance 72ω max, voltage rating 72 vdc max, current rating 1.5a max 62 supply fitting fixing rack 19 12u fully powder coated complete etc as required with complete accessories ( 5 amp x 6 socket, wire manager, rack fan ) valrack / netrack make. 63 wireless n access point interface one 10 / 100mbps rj45 port ( auto mdi / mdix ) , button wps button, reset button, external power supply 9vdc / 0.6a, antenna type 5dbi detachable omni directional antenna, frequency 2.4 2.4835ghz, wireless standards ieee 802.11n, ieee 802.11g, ieee 802.11b, wireless security ssid enable / disable mac address filter 64 / 128 / 152 bit wep encryption wpa / wpa2 / wpa psk / wpa2 psk ( aes / tkip ) encryption wireless modes ap mode, multi ssid mode, client mode, repeater mode ( wds / universal ) , bridge mode, tplink / cisco / netgear panel meter board mb 1 incomer 125a, 415v, ics=icu=25ka rupturing capacity, fp, mccb with extended rotary handle 1 no. 1 no. type 1+2 class i+ii lightning surge arrester 3 pole plus neautral. obo make type no. v25 b+c 3npe385 as per item no. 5094478 with mpcb busbar heat shrinked colour coded aluminium bus bars with smc / dmc busbar supports, nuts & bolts with spring washers. a set of tpn 200a al bus bars. current density shall be 1a / sq.mm instrumentation for incoming 1 no. three phase 0 500v digital voltmeter with selector switch 1 no. 0 125a digital ammeter with cts 125 / 5a and selecter witch 1 set of led type phase indicating lamps with hrc fuses meter compartments meter compartments with electonic meters three phase direct type 10 nos. the vendor shall submit details before fabrication outgoings 25 32a fp mcb 12 nos. supply of main l.t. panel fabricated out of 16swg m.s. iron sheets, compartmentalized type, with epoxy powder protective paint having sufficient housing compartpents for mounting of switchgears as per below mentioned specifications, make: kde / scpl / equivalent design, fabrication and supply of suitable electrical grade enclosure, compartmentalized type with epoxy powder protective paint and panel is to be fabricated out of 16swg make: kde / scpl / equivalent supply and installation of 1000 amp of electrolytic aluminium busbar for power load section. supply and installation of proper dmc busbar supporting system suitable for 1000 amp ratings. 250 amp, 35 ka, tpmccb supply of 160amp, 4pole mccb extended rotary handle make: abb / ge / siemens. 25 / 100 amps. 4 pole mccb, 16 ka cable 3.5 core, 300 sq. mm xlpe / pvc insulated sheathed ( heavy duty ) armoured electric cable with aluminium conductor. 3.5 core, 95 sq. mm xlpe / pvc 3.5 core, 150 sq. mm xlpe / pvc 3.5 core, 185 sq. mm xlpe / pvc detailed estimate for the proposed renovation and upgradation work for food test lab at first & 2nd floor, patliputra industrial area, patna. n.s. 1 parking deck flooring with high build, solvent free textured finish epoxy coating with roller applied 5 mm thick epoxy resin based floor coating nitoflor fc150 over epoxy resin screed nitoflor tf 5000 the intended surface shall be prepared by mile scarification to get mechanical key effect to the primer and the concrete surface for ensuring maximum bonding. strong degrease shall be used to remove the oil deposit on the concrete if any. dust and loose particles shall be cleaned using vacuum cleaners . after which nitoprime 25 shall be applied after mixing the base and hardener mechanically using a slow speed heavy duty drilling machine ( 400 to 500 rpm ) fitted with a suitable paddle to achieve homogeneous mix and applied on the prepared surface. after primer nitoflor tf 5000 shall be applied as a base layer after mixing the base hardener and aggregates throughly and poured on the primed surface and spread evenly to maintain the required thickness of 3 mm. the material should be tampered with a wooden float to ensure complete compaction and finally finished to closed even texture using a steel trowel and cured for seven days. as a finishing coat nitoflor fc 150 shall be applied over the screed surface after mixing mechanically the three components using heavy duty slow speed paddle mixer until achieving a homogeneous mix and spread on the prepared area using medium haired rol;ler for a thickness of 400 microns in two coat. 8.2 providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement: 4 coarse sand ) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing etc. complete at all levels. 8.2.2 granite of any colour and shade 8.2.2.2 area of slab over 0.50 sqm 8.3 extra for providing edge moulding to 19 mm thick marble stone counters, vanities etc. over item no. 8.2 mm thick marble stone counters, vanities etc. over item no. 8.2 including machine polishing to edge to give high gloss finish etc. complete as per design approved by engineer in charge. granite work 8.3.2 granite work 26.27 providing and fixing mineral fibre false ceiling tiles at all heights of size 595x595mm of approved texture, design and pattern. the tiles should have humidity resistance ( rh ) of 99%, light reflectance ≥85%, thermal conductivity k=0.057 w / m k, fire performance as per ( bs 476 pt 6 & 7 ) in true horizontal level suspended on interlocking t grid of hot dipped all round galvanised iron section of 0.33mm thick ( galvanized @120gsm ) comprising of main t runners of 15x32mm of length 3000mm, cross t of size15x32mm of length 1200mm and secondary intermediate cross t of size 15x32mm of length600mm to form grid module of size 600x600mm suspended from ceiling using galvanized mild steel item ( galvanised @80gsm ) 50mm long 8mm outer diameter m 6 dash fasteners, 6mm diameter fully threaded hanger rod upto 1000mm length and l shape level adjuster of size 85x25x2mm, spaced at 1200mm centre to centre along main t. the system should rest on periphery walls / partitions with the help of gi perimeter wall angle of size 24x24x3000mm made of 0.40 mm thick sheet, to be fixed to the wall with the help of plastic rawl plug at 450mm centre to centre & 40mm long dry wall s.s. screws. the exposed bottom portion of all t sections used in false ceiling support system shall be prepainted with polyester baked paint, for all heights. the work shall be carried out as per specifications, drawings and as per directions of the engineer in charge. 26.27.2 with 20mm thick beveled tegular mineral fibre false ceiling tile ( nrc0.7 ) . 12.45.3 providing and fixing false ceiling at all height including providing and fixing of frame work made up of special sections power pressed from m.s. sheet and galvanized in accordance with zinc coating of 120 gms / sqm as per is:277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm at 1200 mm centre to centre one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts to the angle hanger of 25x25x5 mm of required length, and other end of angle hanger being fixed with nut and bolts to g.i. channels 45x15x0.9 mm running at the rate of 1200 mm centre to centre to which the ceiling section 0.5mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having clips of 10.5 mm centre to centre shall be fixed in a direction perpendicular to g.i. channel with connection clips made out of 2.64 mm dia x 230 mm long g.i. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall / partition with the help of rawl plugs at 450 mm centre to centre with 25 mm long drive all screws @230 mm interval including jointing and fixing to a flush finish of tapered and square edges of the gypsum board with recommended filler, paper tapes, finishers and two coats of primer suitable for gypsum board as per manufacturers specification and also including the coat of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per the drawing and specification and direction of the the engineer in charge but excluding the cost of painting. 12.5 mm thick tapered edge gypsum moisture resistant board 12.62 extra for any sunk or raised moulding in the plaster of paris ( gypsum anhydrous ) ceilng .all complete as per specification and direction of e / i. ns 2 supplying fitting and fixing roman blinds in jacard cloth finish as per company specification and as per approved colour and sample inclusive of all taxes and royalty all complete as per specifications / approval and direction of engineer in charge. n.s. 3 providing & fixing double skin laminated both side wpc partition upto specified height with 1.0 mm lamination of greenply / marino / century mica over 12 mm thick wpc of alstone / greenply / century ( min wt. 550kg / cum ) make fitted and fixed both sides over aluminium frame of 50 x 50mm posts at 60 cm centres and 50x50mm horizontal members at approx 60 cm centers including cost of anchoring the partition to floors, walls and ceiling properly as per drawing including making hidden doors as per drawing all complete as per drawing, specifications and direction of e / i. providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of engineer in charge ( door handle , lock, and stopper etc . n.s 4 supplying fitting and fixing glass door handles, h type ( qbghl 5 ) made up of stainless steel brushed steel finish 300 mm heigh / equivalent make all complete including taxes and royalty as per approval and direction of e / i. n.s 5 supplying fixing and fitting high security corner lock for patch fitting ( qbpl 1 make ) brushed steel finish made of graded aluminium alloy cast housing slim and compact size light in weight all complete as per specification and direction of e / i ns 6 providing and fixing of 1.0mm laminated ( greenlam / century / merino ) panelling upto specified height over 12 mm thick wpc board of alstone / greenply / century make fitted and fixed over aluminium frame of 25 x 25mm posts at 30 cm centres and 25 x 25mm horizontal members at approx 30 cm centers including cost of anchoring the panelling to walls properly including termite treatment as per drawing specification and direction of e / i. 14.1.1 repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground, all complete as per direction of e / i. cement mortar 1:4. 13.74 removing white or colour wash by scraping and sand papering and preparing the surface smooth including necessary repair scratches etc. complete 13.80 a.2 providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 13.92 wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade. 13.92.1 two or more coat on new surface. 9.48 providing and fixing m.s grills of required pattern in frames of windows etc. with m.s flats, square or round bars etc. all comlete. 9.48.1 fixed to steel windows by welding. 13.94 painting with sythetic enamel paint of approved brand and manufacture to give an even shade. 13.94.1 two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. 15.23 dismantling tile works in floor and roofs laid in cement mortar including stacking material within 50 metres lead. 15.23.2 for thickness of tiles above 25 mm and upto 40 mm 15.7 demolishing brick work including stacking of serviceable material and disposal of unserviceable materials within 50 metres lead : 15.7.4 in cement mortar disposal of building rubbish / malba / similar unserviceable, dismantled or waste waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by engineer in charge, beyond 50 m initial section 3: electrical work s.h. i : wiring 1.3.3 point wiring in pvc conduit, with modular type switch: wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq mm fr pvc insulated copper conductor single core cable in surface / recessed pvc conduit, with modular switch, modular plate, suitable g.i. box etc. as required. group c 1.4 twin control point wiring in pvc conduit with modular type switch: wiring for twin control light point with 1.5 sq mm fr pvc insulated copper conductor single core cable in surface / recessed pvc conduit, 2 way modular switch, modular plate, suitable g.i. box etc. as required. 1.5 power plug wiring in pvc conduit ( 2x4 sq. mm ) : wiring for light / power plug with 2 x 4 sq. mm fr pvc insulated copper conductor single core cable in surface / recessed pvc conduit alongwith 1 no. 4 sq. mm fr pvc insulated copper conductor singlre core cable for loop earthing as required. ( for 15 amp socket ) 1.7 circuit / sub main wiring in pvc conduit : wiring for circuit / submain wiring alongwith earthwire with the following sizes of pvc insulated copper conductor, singlre core cable in surface / recessed pvc conduit as required. 1.7.1 2 x 1.5 sq.mm. + 1 x 1.5 sq. mm earth wire 1.7.2 2 x 2.5 sq.mm. + 1 x 2.5 sq. mm earth wire 40185 4 x 4 sq.mm. + 1 x 4 sq. mm earth wire 40550 4x 6 sq.mm. + 1 x 6 sq. mm earth wire 1.16 telephone wiring in existing conduit: supplying and drawing following pair, 0.5 sq. mm fr pvc insulated copper conductor, unarmoured telephone cables in existing surface / recessed pvc conduit as required 1.16.2 2 pair 1.21 s / f pvc conduit: supplying and fixing of following sizes of pvc conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recess conduit as required. 1.21.1 20 mm 1.24 s / f modular type switch / socket : supplying and fixing following modular type switch / socket on the existing modular switch / socketon the existing modular plate& switch box including connections but excluding modular plate etc. as required. 1.24.4 3 pin, 5 / 6 amps socket outlet 1.24.5 6 pin, 15 / 16 amps socket outlet 1.24.6 telephone socket outlet 1.24.8 bell push 1.27.1 s / f modular boxes, base & cover plate: supplying and fixing following size / modules, gi box along with modular base & cover plate for modular switches in recess as required. 1 or 2 module ( 75 mm x 75 mm ) 1.31 s / f light plug point modular type accessories: supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5 / 6 amps modular socket outlet and 5 / 6 amps modular switch, connection, painting etc. as required. ( for light plugs to be used in non residential buildings. ) 1.32 s / f power plug point modular type accessories: supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5 / 6 & 15 / 16 amps modular socket outlet and 15 / 16 amps modular switch, connection, painting etc. as required. 5.4 supplying and fixing replaceable compact commercial batten suitable for single tb led tube complete with 20 watt led polycarbonate tb tube with built in driver etc. directly on wall / ceiling including connections with 1.5 sq. mm fr pvc insulated copper conductor etc. as required. 1.37 providing and fixing ding dong call bell suitable for single phase, 230 volts complete as required. 8.15 supply and installation of regular / standard model a.c. ceiling fan of 1200 mm sweep with service value ( cm / mm ) minimum 4.00, air delivery minimum 270 cum / min including wiring the down rods of standard length ( upto 30 cm ) with 1.5 sq mm fr pvc insulated copper conductor etc as required. 5.7 supplying and fixing recess mounted following types led downlighter with minimum efficacy 100 lm / w in pressure die cast aluminium housing and integrated electronic driver etc directly on ceiling including connections with 1.5 sq.mm frls pvc insulated copper conductor cable etc as required. 5.7.1 5 / 7 watt 5.7.5 18 watt 5.9 supplying and fixing recess mounted 36 watt led flat panel ( 2 x 2 ) with minimum efficacy 100 lm / w which provides soft light and glare free symmetrical illumination suitable for armstrong / grid ceiling and integrated electronic driver etcdirectly on false ceiling including connections with 1.5 sq.mm frls pvc insulated copper conductor cable etc as required. 5.11 supplying and fixing wall mounted light bracket / fixture made with polycarbonate suitable for single 9 / 10 watt led lamp directly on wall including connections etc as required. ( but without lamp ) 6.1.6 supplying and fixing of following types lamp in the existing electrical fitting / fixtures etc. as required. 14 / 15 watt cfl lamp. 2.12 s / f c series, sp mcb: supplying and fixing following rating, 240 / 415 volts, c curve, miniature circuit breaker, suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. 2.12.1 6 / 32 amps, single pole 2.12.2 6 / 32 amps, spn 2.12.4 6 / 32 amps, triple pole and neutral 2.12.8 40 amps, triple pole and neutral 2.19 supplying and fixing 20amp 240 volts spn mcb industrial type, power socket with 25amp spn mcb and 25 amps top in proper size steel box and plate as required. all complete as per instructions of elec.er. / architect. 8.11 supply and fixing of fabricated electrical control panel of cubical construction, floor / wall mounted type, fabricated out of 16 swg crca sheet, compartmentalised with hinged doors, dust and vermin proof, powder coated painting of approved shade after 7 tank treatment process, cable alley, internal wiring, earth terminals, bus bar chamber, insulator and complete in all respect etc and panel manufactures must be approved by cpri. ( but without ryb inicator, ammeter, voltmeter, inter connection copper conductor cable / solid copper strip, switchgears etc. ) ...

Due Date : April 06, 2024

Tender Value : ₹ 12.47 Crore

View Tender
22
Bihar Industrial Area Development Authority - Bihar

42981157 request for proposal ( rfp ) for selection of firm / agency / supplier for supply, installation, testing and commissioning of different machines including civil, electrical and other fixtures for setting up food testing lab in upendra maharathi shilp anusandhan sansthan, patna, bihar. 1 highly sensitive triple quadrupole lcms / ms system 2 gas chromatographs with ecd, fid, fpd detector, with headspace and auto sampler ( auto sampler to be provided ) with 5 years consumable and warranty extended upto 5 years 3 gc ms ms with ecd, fid, fpd detector, with headspace and auto sampler ( auto sampler to be provided ) with 5 years consumable and warranty extended upto 5 years 4 icpms accessories and microwave digestion system 5 double beam atomic absorption spectrophotometer 6 high performance liquid chromatography ( gradient ) with uv and fld detector, auto sampler & essential columns with accessories with 5 years consumable and warranty extended upto 5 years 7 uv vis spectrophotometer 8 centrifuge with 5 years consumable and warranty extended upto 5 years 9 ultra low temperature 80 ult freezer 10 ph meter with 5 years consumable and warranty extended upto 5 years 11 elisa reader, filter based plate reader with 5 years consumable and warranty extended upto 5 years 12 heating mantles with 5 years consumable and warranty extended upto 5 years 13 laboratory precision oven uniform temperature 300 o c with 5 years consumable and warranty extended upto 5 years 14 cyclotec lab grinding millwith 5 years consumable and warranty extended upto 5 years 15 magnetic stirrer with 5 years consumable and warranty extended upto 5 years 16 magnetic stirrer with hotplate with 5 years consumable and warranty extended upto 5 years 17 block digestor for eight samples with 5 years consumable and warranty extended upto 5 years 18 moisture analyzer with 5 years consumable and warranty extended upto 5 years 19 muffle furnace 930 degree c with 5 years consumable and warranty extended upto 5 years 20 rectangular hot plate with 5 years consumable and warranty extended upto 5 years 21 refrigerated microcentrifuge with 5 years consumable and warranty extended upto 5 years 22 refrigerators, 2 to 8degreec, capacity 1000l with smart view with 5 years consumable and warranty extended upto 5 years 23 refrigerated incubator orbital shaker ( stackable ) with 5 years consumable and warranty extended upto 5 years 24 soxhlet extraction unit with 5 years consumable and warranty extended upto 5 years 25 nitrogen concentrator ( turbo vap. concentrator ) with 5 years consumable and warranty extended upto 5 years 26 solid phase extraction manifold with 5 years consumable and warranty extended upto 5 years 27 vaccum fitration apparatus along with vaccum pump with 5 years consumable and warranty extended upto 5 years 28 multi tube vortex with mixing, heating, and cooling functions with 5 years consumable and warranty extended upto 5 years 29 analytical weight box, e2 with 5 years consumable and warranty extended upto 5 years 30 analytical weight box, e2, with 5 years consumable and warranty extended upto 5 years 31 analytical balance, 220g x 0.1mg with internal calibration with 5 years consumable and warranty extended upto 5 years 32 microbalance, 5.2g x 0.001mg with internal calibration and static eliminator with 5 years consumable and warranty extended upto 5 years 33 precision balance, 6200g x 0.1 with external calibration with 5 years consumable and warranty extended upto 5 years 34 micro pipette, 30 300 μl, eppendorf with 5 years consumable and warranty extended upto 5 years 35 micropipette, 1 to 10 ml, eppendorf with 5 years consumable and warranty extended upto 5 years 36 micro pipette, 2 to 20 μl, eppendorf with 5 years consumable and warranty extended upto 5 years 37 micro pipette, 10 to 100 μl, eppendorf with 5 years consumable and warranty extended upto 5 years 38 micro pipette, 20 to 200 μl, eppendorf with 5 years consumable and warranty extended upto 5 years 39 micro pipette, 100 to 1000 μl, eppendorf with 5 years consumable and warranty extended upto 5 years 40 rotary vacuum evaporator along with heating bath, diaphragm pump, interface and recirculating chiller rotary evaporator and heating bath with 5 years consumable and warranty extended upto 5 years 41 digital stop watch , 1 real time pcr system with 5 years consumable and warranty extended upto 5 years 2 b.o.d cooling incubators with 5 years consumable and warranty extended upto 5 years 3 vertical laboratory autoclave ( radial locking ) with 5 years consumable and warranty extended upto 5 years 4 laboratory precision oven uniform temperature 300 o c with 5 years consumable and warranty extended upto 5 years 5 horizontal laminar air flow with 5 years consumable and warranty extended upto 5 years 6 digital top pan balance ( 20 gm 800 gm ) , with 5 years consumable and warranty extended up to 5 years 7 analytical balance ( 0.01mg 20 gm ) , with 5 years consumable and warranty extended upto 5 years 8 stability chamber with 5 years consumable and warranty extended upto 5 years 9 biosafety cabinet type ii b, with 5 years consumable and warranty extended upto 5 years 10 deep freezer 20°c, with 5 years consumable and warranty extended upto 5 years olsc 119 12 11 stomacher, with 5 years consumable and warranty extended upto 5 years 12 homogenizer / lab stirrer, with 5 years consumable and warranty extended upto 5 years outer & inner ss 13 ph meter, with 5 years consumable and warranty extended upto 5 years 14 lab grinding mill ( homogenizer ) with 5 years consumable and warranty extended upto 5 years olsc ls 01 15 vortex mixer, with 5 years consumable and warranty extended upto 5 years 16 refrigerated microcentrifuge with 5 years consumable and warranty extended upto 5 years 17 non refrigerated microcentrifuge with 5 years consumable and warranty extended upto 5 years 18 gel documentation system with printer, with 5 years consumable and warranty extended upto 5 years 19 biosafety cabinet type ii b, with 5 years consumable and warranty extended upto 5 years 20 sonicator, with 5 years consumable and warranty extended upto 5 years 21 binocular microscope / 3d microscope, with 5 years consumable and warranty extended upto 5 years 22 uv cabinet, with 5 years consumable and warranty extended upto 5 years 23 serological water bath, with 5 years consumable and warranty extended upto 5 years 24 electronic colony counter with 5 years consumable and warranty extended upto 5 years 1 wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm fr pvc insulated copper conductor single core cable in surface / recessed pvc conduit, with modular type switch, modular plate, suitable size g.i. box and earthing the point with 1.5 sq.mm. fr pvc insulated copper conductor single core cable etc.as required group c 2 wiring for light / power plug with 2x4 sq.mm fr pvc insulated copper conductor single core cable in surface / recessed medium class pvc conduit along with 1 no 4 sq.mm. fr pvc insulated copper conductor single core cable for loop earthing as required. 3 wiring for circuit / submain wiring along with earth wire with the following sizes of fr pvc insulated copper conductor, single core cable in surface / recessed pvc conduit as required. 2x2.5 sq.mm +1x2.5 sq.mm 2 x 6 sq.mm + 1 x 6 sq.mm. earth wire 2 x 10 sq.mm. + 1 x 10 sq.mm. earth wire 4 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire 4 x 6 sq. mm + 1 x 6 sq. mm earth wire 4 x 10 sq. mm + 1 x 10 sq. mm earth wire 4 x 16 sq. mm + 1 x 16 sq. mm earth wire 4 supplying and fixing pvc / g.i box of 200mm x 250mm x 60mm deep on surface or in recess with suitable size of phenolic laminated sheet cover in fornt including painting etc as required ( adopter box above each d.b ) . 5 supplying and fixing suitable gi box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pinm 5 / 6 and 15 / 16 amps modular socket outlet and 15 / 16 amps modular switch, connection, painting etc. as required. ( for power plug ) 6 supplying and fixing suitable size g.i box with modular plate and cover in front on surface in recess including providing and fixing 3 pin, 5 / 6 amps modular socket outlet and 5 / 6 amps modular type switch, connection, painting etc., as required. ( for light plugs to be used in non residential buildings ) 7 supply & fixing 8 way double door sp & n, sheet steel, mcb distribution board, 240 volts, on surface / in recess, complete with tinned copper busbar, neutral link, earth bar, din bar, detachable gland plate, interconnections, phosphatised and powder painted including earthing etc.as required ( but without mcb / rccb / isolator ) lighting db ( a ) 40 amps double pole mcb isolator : 1 no. ( b ) outgoing 6 / 32 amps sp mcb ( b series ) :6 nos. 8 supply & fixing 4 way ( 4+12 ) double door tp & n, sheet steel, mcb distribution board, 415 volts, on surface / in recess, complete with tinned copper busbar, neutral link, earth bar, din bar, detachable gland plate, interconnections, phosphatised and powder painted including earthing etc.as required ( but without mcb / rccb / isolator ) power db ( a ) 63 amps double pole mcb isolator : 1 no. 9 ( b ) outgoing 16 / 32 amps sp mcb ( c series ) : 12 nos. s / f following modular type switch / socket on the existing modular plate and switch box including connection but excluding modular plate etc as required. 10 tv antenna socket outlet 11 s / f electronics musical call bell suitable for d.c / a.c. single phase 230 copmplete as required. 12 supplying and fixing batten / angle holder incluiding connection etc as required. 13 supplying and fixing 2 pin, 5 amp, celling rose on the existing junction box / pvc box incluiding connection etc as required. 14 s / f modular blanking plate on the existing modular plate and switch box excluding modular plate as required. 15 supplying and drawing co axial tv cable rg 6 grade, 0.7 mm solid copper conductor pe insulated, shielded with fine tinned copper braid and protected with pvc sheath in the existing surface / recessed steel / pvc conduit as required. electrical fixture fitting 16 supply and installation of 300 mm 230volt ac exhaust fan in the existing opening including making good the damage connection testing commissioning etc as required. 17 supply & installation 400 mm dia 230 volt ac wall / cabin fan including fixing the bracket making connection testing commissioning etc as required. 18 supply and fixing recess mounted 18 watt led vertical downlighter complete with all accessories and replaceable electronic driver directly on false ceiling including connection with 1.5 sq mm fr insulated copper conductor cable and earthing the body etc as required 19 supplying and fixing indoor recess mounting 36 watt led flat panel luminaire suitable for armstrong / grid ceiling and complete with electronic driver etc. directly on false ceiling including connection with 1.5 sqmm fr pvc insulated copper conductor cable and earthing the body etc as required. 20 supplying and fixing of following types lamp in the existing electrical fitting / fixtures etc. as required. 10 / 12 watt led lamp 21 supplying and fixing 90 watt led type street light with die cast aluminium housing for ingress protection of ip65 and complete with all accessories etc, on pole / building including connection with fr pvc insulated copper conductor cable and earthing the body etc. as required. 22 supplying and fixing following sizes of pvc conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required. section 4: fire extinguishers p / f with brackets wall mounted fire extinguishers as per details below: 23 abc power type ( stored pressure ) fire extinuisher 4 kg .capacity , isimark ( is: 15683 ) squeeze gripe valve, operating temperature ( +5 deg. to ( +55 ) deg.for class 3a type of fire with abc powder , complete in all respect. 24 co2 type fire extinguisher 4.5kg capacity isi mark ( is : 15683 ) squeeze grip value , operating temperature ( 30deg. to 55deg.foe class 13b type of fire fitted with 1mt.hose & pvc hoen, complete in all respect. earthing 25 providing and fixing 25 mm x 5 mm copper strip on surface or in recess for connections etc. as required. 26 providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface / recessed conduit / submain wiring / cable as required. 27 providing chemical / mineral maintenance free earthing system comprising of copper coated earth electrode 3 metre length and 17.2 mm outer dia along with 25 kg earth conductivity enhancing back fill mineral compound for earth electrode to fill up the excavated earth and earth inspection pit etc. as required. 28 providing and fixing copper tape 20 mm x 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( for horizontal run ) 29 providing and fixing copper tape 20 mm x 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( for vertical run ) air condition 30 2 ton inverter cassette ac 5 star inverter ( make: mitsubisi / daikin / toshiba / o general ) noise level indoor ( low / mid2 / mid1 / high ) in db ( a ) not below 45 / 49 / 51.outdoor in not below 54 db ( a ) 31 1.5 ton 5 star inverter split ac ( make: mitsubisi / daikin / toshiba / o general ) noise level indoor ( low / mid2 / mid1 / high ) in db ( a ) not below 45 / 49 / 51.outdoor in not below 54 db ( a ) stablizer ( voltage range: ( 90v to 230 v ) extra copper pipe & electrical wires pvc pipe for drain water fire fighting 32 supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices ( including detectors ) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics / lcd display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory ( eprom ) , power supply unit ( 230± 5% v, 50 hz ) , 48 hrs back up with 24 volt sealed maintenance free batteries with automatic charger. the panel shall have facility to connect printer to printout log and facility to have seamless integration with analog / digital voice evacuation system ( which is part of the schedule of work under sh: pa system ) and shall be complete with all accessories. the panel shall be compatible for ibms system with open protocol bacnet / modbus over ip complete as per specifications. ( edwards est ) 1 loop panel. 1 kva line interactive ups with 30 min battery back up 33 supplying and fixing intelligent addressable type multicriteria detector with base for use as heat or smoke or combined both with automatic electronic addressing, microprocessor type with builtin integrated short circuit isolator including testing, commissiong etc as reqd. 34 supplying and fixing intelligent addressable type heat detector with base with automatic electronic addressing, microprocessor type with builtin integrated short circuit isolator including testing, commissiong etc as reqd. 35 sypplying and fixing intelligent addressable manual call point having inbuilt short circuit isolator i / c testing and commissiong etc as reqd. 36 addressable sounder with interface module, power supply for sonder and programmable by software having integrated short circuit isolator & having operating temperature 10⁰c to + 55⁰c 37 analogue addressable control module with ip66 casing containing four relay outputs, each containing a potential free dpdt contact with a fail safe and in built short circuit isolator the ambient temperature range shall be 20c to +60c. 37 analogue addressable monitor module with ip66 casing containing four relayinputs, each containing a potential free dpdt contact with a fail safe and in built short circuit isolator the ambient temperature range shall be 20c to +60c. duel led response indicator ( local ) 38 supplying and fixing of following sizes of medium class pvc conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required. ( malhotra / anchor ) 20 mm dia 39 supplying & drawing following sizes of fr pvc insulated copper conductor single core cables in existing surface / recessed pvc conduit etc. as complete as required ( polycab / havels ) 2 x 1.5 sq.mm 40 kanex brand abc type fire extinguisher cap. 6 kg filled with mono ammonium phosphate powder 50% confirms to is 4308, stored pressure type, ugts pressure gauge, gross weight 8.9 kg, empty weight 2.9 kg, can height 530 mm, diameter 150 ± 10mm, discharge time 24 sec, controllable discharge mechanism, jet range 5 meters, average discharge is 90%, applicable on class a, b & c and electrically started fire, fire rating 4a:144b, can construction : deep drawn & co2 mig welded, epdm rubber hose with both end aluminum clamped, internal coating epoxy powder coating, external coating pure polyester powder coating ( uv resistant ) , brass forged valves with safety pin is of ss material, sheet metal thickness : 1.8 mm, isi approved is 15683:2018. 41 kanex brand co2 high pressure portable 4.5 kg fire extinguisher, filled with co2 gas as per is 15222, gross weight 16.4, empty weight 11.9 kg, control discharge mechanism fitted with 1 meter wire braided hose & flat horn with diffuser nozzle for dispersed discharge of co2, discharge time 12 sec, average discharge is 95%, applicable on class b, c and electrically started fire, fire rating 55b, internal coating is not applicable & external coating is of enamel spray painting, powder coated handle, squeeze grip type valve confirm to is 3224 isi marked, co2 cylinder construction: hot spinning by seamless pipes & bearing isi mark, body confirms to is 7285 and peso approved, extinguishers confirmed to is 15683:2018 and isi marked. 42 clean agent 2 kg fire extinguishers filled with hfc based gas electrically nonconductive non corrosive, colorless and non residual gas, applicable classes a, b, c, and electrical fires, ugts pressure gauge, gross weight 3.6 kg, empty weight 1.6 kg, height 380mm, diameter 106 ± 10mm, discharge time 12 sec, controllable discharge mechanism, jet range 3 meters, average discharge is 95%, deep drawn with mig welding technology, epdm rubber hose with special aluminum discharge nozzle, external coating pure polyester powder ( uv resistant ) , internal coating epoxy polyester powder, brass forged valves with safety pin is of ss material, fire rating 1a:21b, confirms to is 15683 & isi marked. 43 supplyy, installation, testing & commissioning of 5 lb capacity novec1230 dlp assembly with automatic valve push in connector for tube 5lb novec 1230 gas mounting bracket end linear adopter and low pressure switch for monitoring system activation. : kanex / fire trace 44 supply, installation, testing and commissioning of linear pneumatic heat detection tube with all necessary fitting and supports. ( rotarex / fire trace ) 45 supply, installation, testing & commissioning of audio visual alarm. : kanex / fire trace 46 automatic type 5 kg fire extinguishers hfc 236fa, applicable fire classes a, b & c, ugts pressure gauge, empty weight 2.64 kg, full weight 7.64 kg, can height 375mm, diameter 230 ± 10mm, sheet metal thickness : 2 mm, body construction deep drawn with mig welding technology, brass forged sprinkler valves with nozzle is specially designed to give more than 99% discharge. together with orifice characteristic to cover adequately fire risks with scattering cone of 40 to 45° angle. external pure polyester ( uv resistant ) and internal epoxy polyester powder coated, heat sensitive glass bulb of 68 °c. area covered will be 2 2.5 m2 and volume of coverage is 7 m3. brand : kanex cctv 47 network switch: 24 x 10 / 100 / 1000base t, poe, fixed, 2 x sfp 100 / 1000 mbps, 52 gbps sitching performance capacity, 39 mbps forwarding performance rate. 525 k byte packet buffer, 8k mac address table. 9k bytejumbo frame, 170 watt poe power. 48 bullet camera : 1 / 3 3 megapixel progressive scan cmos, pixels 2304 ( h ) x 1296 ( v ) , electronic shutter speed automanual, 1 / 3 ( 4 ) 1 / 100000s, min illumination 0.1 lux, f1.4 ( color ) ; 0 lux ( ir leds on ) , ir distance upto 100 ft ( 30 m ) , depending upon scene reflectance.day / night auto ( icr ) / color / bw, backlight compensation blc / hlc / dwdr , white balance auto / manual, gain control auto / manual, noise reduction3d, privacy masking upto 4 areas, lens focal length 2.7 12mm, max, aperture f1.4, focus control auto , horizontal angle of view 86 28 degree, lens type motorized focus / zoom, video compression h 264 ( main / high / baseline profile ) / mjpeg, resolution 3 mp ( 2304 x 1296 ) , 1080p ( 1920x1080 ) , 720p ( 1280x720 ) , d1 ( 704x576 / 704x480 ) , cif ( 352x288 / 352x240 ) , frame rate main stream 3 mp ( 1 20 fps ) , 1080p ( 1 25 / 30 fps ) , frame rate 49 dome camera: image sensor 1 / 3 3 magapixel progressive scan cmos, effective pixels 2304 ( h ) x 1296 ( v ) , electronic shutter speed min. illumination 0.045 lux, f2.1 ( color ) , 0 lux ( ir leds on ) , ir distance upto 100 ft ( 30 m ) , depending on scene reflectance, day / night auto ( icr ) / color / bw, backlight compensation blc / hlc / dwdr, white balance, auto / manual, gain control auto / manual, noise reduction 3d, privacy masking upto 4 areas, focal length 2.8mm, max. aperture f2.1, horizontal angle of view 92degree, lens type fixed, video compression h264 ( main / high / baseline profile ) / mjpeg, resolution 3mp ( 2304x1296 ) , 1080p ( 1920x1080 ) , 720p ( 1280x720 ) , d1 ( 704x576 / 704x480 ) 50 video recorder: simultaneous multi channel live view, real time recording, playback, network operation, remote access, usb backup, user interface support 16 bit true color graphical menu interface and mouse operation.preview screen 1 / 4 / 8 / 16 / 24 windows, ip video input 24 channels, video standard pal ( 625 line, 50t / s ) , ntsc ( 525 line, 60t / s ) , video compression h264 high profile, display moitor d1;vga & hdmi, hd ( support 1920x1080, 1280x720, 1440x900, 1260x1024, 1024x768, 800x600 ) 51 display: screen size 42 inch or above ( lg / sony / samsung / philips ) , panel technology ips, aspect ratio 16:9, native resolution 1920x1080 ( fhd ) , brightness 350nit or higher, contrast ratio 1100:1 or higher, dynamic cr 500, 000:1 or higher, viewing angle ( hxv ) 178x178, orientation portrait & landscape, operation temperature 0 degree c to 40 degree c, safety ul, eul, emc fcc class a, ip video unit 16 channel, 1 ch, rca ( 2.0 vp p, 1kohm ) two way audio input, 100 mbps incoming bandwidth, 80 mbps bandwidth, 128 remote connection, hdmi / vga output : 1 ch, resolution hard disk 4 tb camera installation and connectivity telephone 52 epabx with 50 line extension up to 80 line with 2 slt / 2 console the equipment shall be electronic type. it shall have microprocessor / micro controller based.it shall employ pcm / tdm / ip, 100% non blocking, ip digital switching technology.it shall have distributed processing architecture, slic and smt design.system power supply should be in built and smps type which input which input ranges from 90 – 265 vac, 48 60 hz & it has to be battery charger circuit inbuilt, so that, in case of power failure the psu can automatically switch to battery and vice versa. it should be suitable for dtmf as well as fsk type of telephone instruments.its capacity shall be suitable for maximum 96 numbers of c.o. lines, 120 analog extension lines and 500 ip extensions. 53 supply, installation, testing & commissioning of termination box for 50 pair epabx system complete as required 54 base phone cli ( panasonic / beetal ) landline phone with caller id facility corded phone numerical keypad 35 call logs3 display lines disclaimer, tone / pulse switchable ring led indication flash pause dynamic change over from pulse tone, 1 year manufacturer warranty 55 digital console phone 56 network switch : 24 x 10 / 100 / 1000base t, poe, fixed, 2 x sfp 100 / 1000 mbps, 52 gbps sitching performance capacity, 39 mbps forwarding performance rate, 525 k byte packet buffer, 8k mac address table, 9k byte jumbo frame, 170 watt poe power. 57 smart ups on line, 5.4 kw / 6 kva with 1 hour backup12 v 65 ah smf battery ups toplogy double conversion on line, power rating ( va / watts ) 5400watts / 6000va, form factor rack / tower convertible; output power capacity 5400 watts / 6000 va, max configurable power 5400watts / 6000va, nominal output voltage 230v, output voltage note configurable for 220 : 230 or 240 nominal output voltage, efficiency at full load 94.00%, output voltage distortion less than 3%, output frequency ( sync to mains ) 50 / 60 hz + / 3 hz, crest factor 03:01, waveform type sine wave, output connections ( 1 ) *hard wire 3 wire ( 8 ) * ( h n + g ) iec 320 c13 ( 8 ) , bypass built in bypass, output short circuit protection yes, parallel redundancy ( option ) 1 + 1, nominal input voltage 230v, input power factor>0.98, input frequency 40 70hz, input connections terminal block, protection thermal circuit breaker ( 250vac / 20a ) , input voltage range for main operations full load 160 285v, input voltage range for mains operation half load 160 285v, high voltage withstand capability 420 vac, green mode range 210 250 vac ( 230 v ) , battery type mintenance free sealed lead acid battery with suspended, electrolyte. 12v 65 ah smf battery for 60 min battery back up. 58 supplying and drawing following pair 0.5 sq. mm fr pvc insulated annealed copper conductor, unarmoured telephone cable in the existing surface / recessed pvc conduit as required. networking 59 supplying & fixing rj 45 type computer socket suitable for cat 6 on modue gi box along with base and cover plate in surface or in recess including making connection , soldering etc as required. supplying and drawing utp 4 pair cat 6 lan cable patch cord 1 meter patch cord 2 meter 60 24 port gbe smart managed switch with gbe uplink interfaces 24 ports 10 / 100 / 1000mbps+4 sfp;port standards & functions ieee 802.3 10base t ethernet ( twisted pair copper ) , ieee 802.3u 100basetx fast ethernet ( twisted pair copper ) , ieee 802.3ab 1000base t gigabit ethernet ( twisted pair copper ) , ieee 802.3az compliance autonegotiation, ieee 802.3x flow control; full / half duplex full / half duplex for 10 / 100 mbps speeds, full duplex for gigabit speed;media interface exchange auto mdi / mdix adjustment for all twisted pair ports;switching capacity 56 gbps; transmission method store and forward; mac address table 16, 000 entries per device, maximum 64 bytes packet forwarding rate 41.7 mpps, packet buffer memory 1.5 mb, maximum power consumption 22.45 watts, standby power consumption 17.84 w / 240 v, acoustics 0 dba heat dissipation 76.55 btu / hr certifications ce ( lvd ) 61 category 6, utp 24 port patch panel size 482.6mm x 44.2 ( 19’’ x 1u ) , panel material steel fully powder coated, unshielded rj 45, plug insertion cycle 750 times dc resistance 72ω max, voltage rating 72 vdc max, current rating 1.5a max 62 supply fitting fixing rack 19 12u fully powder coated complete etc as required with complete accessories ( 5 amp x 6 socket, wire manager, rack fan ) valrack / netrack make. 63 wireless n access point interface one 10 / 100mbps rj45 port ( auto mdi / mdix ) , button wps button, reset button, external power supply 9vdc / 0.6a, antenna type 5dbi detachable omni directional antenna, frequency 2.4 2.4835ghz, wireless standards ieee 802.11n, ieee 802.11g, ieee 802.11b, wireless security ssid enable / disable mac address filter 64 / 128 / 152 bit wep encryption wpa / wpa2 / wpa psk / wpa2 psk ( aes / tkip ) encryption wireless modes ap mode, multi ssid mode, client mode, repeater mode ( wds / universal ) , bridge mode, tplink / cisco / netgear panel meter board mb 1 incomer 125a, 415v, ics=icu=25ka rupturing capacity, fp, mccb with extended rotary handle 1 no. 1 no. type 1+2 class i+ii lightning surge arrester 3 pole plus neautral. obo make type no. v25 b+c 3npe385 as per item no. 5094478 with mpcb busbar heat shrinked colour coded aluminium bus bars with smc / dmc busbar supports, nuts & bolts with spring washers. a set of tpn 200a al bus bars. current density shall be 1a / sq.mm instrumentation for incoming 1 no. three phase 0 500v digital voltmeter with selector switch 1 no. 0 125a digital ammeter with cts 125 / 5a and selecter witch 1 set of led type phase indicating lamps with hrc fuses meter compartments meter compartments with electonic meters three phase direct type 10 nos. the vendor shall submit details before fabrication outgoings 25 32a fp mcb 12 nos. supply of main l.t. panel fabricated out of 16swg m.s. iron sheets, compartmentalized type, with epoxy powder protective paint having sufficient housing compartpents for mounting of switchgears as per below mentioned specifications, make: kde / scpl / equivalent design, fabrication and supply of suitable electrical grade enclosure, compartmentalized type with epoxy powder protective paint and panel is to be fabricated out of 16swg make: kde / scpl / equivalent supply and installation of 1000 amp of electrolytic aluminium busbar for power load section. supply and installation of proper dmc busbar supporting system suitable for 1000 amp ratings. 250 amp, 35 ka, tpmccb supply of 160amp, 4pole mccb extended rotary handle make: abb / ge / siemens. 25 / 100 amps. 4 pole mccb, 16 ka cable 3.5 core, 300 sq. mm xlpe / pvc insulated sheathed ( heavy duty ) armoured electric cable with aluminium conductor. 3.5 core, 95 sq. mm xlpe / pvc 3.5 core, 150 sq. mm xlpe / pvc 3.5 core, 185 sq. mm xlpe / pvc detailed estimate for the proposed renovation and upgradation work for food test lab at first & 2nd floor, patliputra industrial area, patna. n.s. 1 parking deck flooring with high build, solvent free textured finish epoxy coating with roller applied 5 mm thick epoxy resin based floor coating nitoflor fc150 over epoxy resin screed nitoflor tf 5000 the intended surface shall be prepared by mile scarification to get mechanical key effect to the primer and the concrete surface for ensuring maximum bonding. strong degrease shall be used to remove the oil deposit on the concrete if any. dust and loose particles shall be cleaned using vacuum cleaners . after which nitoprime 25 shall be applied after mixing the base and hardener mechanically using a slow speed heavy duty drilling machine ( 400 to 500 rpm ) fitted with a suitable paddle to achieve homogeneous mix and applied on the prepared surface. after primer nitoflor tf 5000 shall be applied as a base layer after mixing the base hardener and aggregates throughly and poured on the primed surface and spread evenly to maintain the required thickness of 3 mm. the material should be tampered with a wooden float to ensure complete compaction and finally finished to closed even texture using a steel trowel and cured for seven days. as a finishing coat nitoflor fc 150 shall be applied over the screed surface after mixing mechanically the three components using heavy duty slow speed paddle mixer until achieving a homogeneous mix and spread on the prepared area using medium haired rol;ler for a thickness of 400 microns in two coat. 8.2 providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement: 4 coarse sand ) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing etc. complete at all levels. 8.2.2 granite of any colour and shade 8.2.2.2 area of slab over 0.50 sqm 8.3 extra for providing edge moulding to 19 mm thick marble stone counters, vanities etc. over item no. 8.2 mm thick marble stone counters, vanities etc. over item no. 8.2 including machine polishing to edge to give high gloss finish etc. complete as per design approved by engineer in charge. granite work 8.3.2 granite work 26.27 providing and fixing mineral fibre false ceiling tiles at all heights of size 595x595mm of approved texture, design and pattern. the tiles should have humidity resistance ( rh ) of 99%, light reflectance ≥85%, thermal conductivity k=0.057 w / m k, fire performance as per ( bs 476 pt 6 & 7 ) in true horizontal level suspended on interlocking t grid of hot dipped all round galvanised iron section of 0.33mm thick ( galvanized @120gsm ) comprising of main t runners of 15x32mm of length 3000mm, cross t of size15x32mm of length 1200mm and secondary intermediate cross t of size 15x32mm of length600mm to form grid module of size 600x600mm suspended from ceiling using galvanized mild steel item ( galvanised @80gsm ) 50mm long 8mm outer diameter m 6 dash fasteners, 6mm diameter fully threaded hanger rod upto 1000mm length and l shape level adjuster of size 85x25x2mm, spaced at 1200mm centre to centre along main t. the system should rest on periphery walls / partitions with the help of gi perimeter wall angle of size 24x24x3000mm made of 0.40 mm thick sheet, to be fixed to the wall with the help of plastic rawl plug at 450mm centre to centre & 40mm long dry wall s.s. screws. the exposed bottom portion of all t sections used in false ceiling support system shall be prepainted with polyester baked paint, for all heights. the work shall be carried out as per specifications, drawings and as per directions of the engineer in charge. 26.27.2 with 20mm thick beveled tegular mineral fibre false ceiling tile ( nrc0.7 ) . 12.45.3 providing and fixing false ceiling at all height including providing and fixing of frame work made up of special sections power pressed from m.s. sheet and galvanized in accordance with zinc coating of 120 gms / sqm as per is:277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm at 1200 mm centre to centre one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts to the angle hanger of 25x25x5 mm of required length, and other end of angle hanger being fixed with nut and bolts to g.i. channels 45x15x0.9 mm running at the rate of 1200 mm centre to centre to which the ceiling section 0.5mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having clips of 10.5 mm centre to centre shall be fixed in a direction perpendicular to g.i. channel with connection clips made out of 2.64 mm dia x 230 mm long g.i. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall / partition with the help of rawl plugs at 450 mm centre to centre with 25 mm long drive all screws @230 mm interval including jointing and fixing to a flush finish of tapered and square edges of the gypsum board with recommended filler, paper tapes, finishers and two coats of primer suitable for gypsum board as per manufacturers specification and also including the coat of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per the drawing and specification and direction of the the engineer in charge but excluding the cost of painting. 12.5 mm thick tapered edge gypsum moisture resistant board 12.62 extra for any sunk or raised moulding in the plaster of paris ( gypsum anhydrous ) ceilng .all complete as per specification and direction of e / i. ns 2 supplying fitting and fixing roman blinds in jacard cloth finish as per company specification and as per approved colour and sample inclusive of all taxes and royalty all complete as per specifications / approval and direction of engineer in charge. n.s. 3 providing & fixing double skin laminated both side wpc partition upto specified height with 1.0 mm lamination of greenply / marino / century mica over 12 mm thick wpc of alstone / greenply / century ( min wt. 550kg / cum ) make fitted and fixed both sides over aluminium frame of 50 x 50mm posts at 60 cm centres and 50x50mm horizontal members at approx 60 cm centers including cost of anchoring the partition to floors, walls and ceiling properly as per drawing including making hidden doors as per drawing all complete as per drawing, specifications and direction of e / i. providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of engineer in charge ( door handle , lock, and stopper etc . n.s 4 supplying fitting and fixing glass door handles, h type ( qbghl 5 ) made up of stainless steel brushed steel finish 300 mm heigh / equivalent make all complete including taxes and royalty as per approval and direction of e / i. n.s 5 supplying fixing and fitting high security corner lock for patch fitting ( qbpl 1 make ) brushed steel finish made of graded aluminium alloy cast housing slim and compact size light in weight all complete as per specification and direction of e / i ns 6 providing and fixing of 1.0mm laminated ( greenlam / century / merino ) panelling upto specified height over 12 mm thick wpc board of alstone / greenply / century make fitted and fixed over aluminium frame of 25 x 25mm posts at 30 cm centres and 25 x 25mm horizontal members at approx 30 cm centers including cost of anchoring the panelling to walls properly including termite treatment as per drawing specification and direction of e / i. 14.1.1 repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground, all complete as per direction of e / i. cement mortar 1:4. 13.74 removing white or colour wash by scraping and sand papering and preparing the surface smooth including necessary repair scratches etc. complete 13.80 a.2 providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 13.92 wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade. 13.92.1 two or more coat on new surface. 9.48 providing and fixing m.s grills of required pattern in frames of windows etc. with m.s flats, square or round bars etc. all comlete. 9.48.1 fixed to steel windows by welding. 13.94 painting with sythetic enamel paint of approved brand and manufacture to give an even shade. 13.94.1 two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. 15.23 dismantling tile works in floor and roofs laid in cement mortar including stacking material within 50 metres lead. 15.23.2 for thickness of tiles above 25 mm and upto 40 mm 15.7 demolishing brick work including stacking of serviceable material and disposal of unserviceable materials within 50 metres lead : 15.7.4 in cement mortar disposal of building rubbish / malba / similar unserviceable, dismantled or waste waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by engineer in charge, beyond 50 m initial section 3: electrical work s.h. i : wiring 1.3.3 point wiring in pvc conduit, with modular type switch: wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq mm fr pvc insulated copper conductor single core cable in surface / recessed pvc conduit, with modular switch, modular plate, suitable g.i. box etc. as required. group c 1.4 twin control point wiring in pvc conduit with modular type switch: wiring for twin control light point with 1.5 sq mm fr pvc insulated copper conductor single core cable in surface / recessed pvc conduit, 2 way modular switch, modular plate, suitable g.i. box etc. as required. 1.5 power plug wiring in pvc conduit ( 2x4 sq. mm ) : wiring for light / power plug with 2 x 4 sq. mm fr pvc insulated copper conductor single core cable in surface / recessed pvc conduit alongwith 1 no. 4 sq. mm fr pvc insulated copper conductor singlre core cable for loop earthing as required. ( for 15 amp socket ) 1.7 circuit / sub main wiring in pvc conduit : wiring for circuit / submain wiring alongwith earthwire with the following sizes of pvc insulated copper conductor, singlre core cable in surface / recessed pvc conduit as required. 1.7.1 2 x 1.5 sq.mm. + 1 x 1.5 sq. mm earth wire 1.7.2 2 x 2.5 sq.mm. + 1 x 2.5 sq. mm earth wire 40185 4 x 4 sq.mm. + 1 x 4 sq. mm earth wire 40550 4x 6 sq.mm. + 1 x 6 sq. mm earth wire 1.16 telephone wiring in existing conduit: supplying and drawing following pair, 0.5 sq. mm fr pvc insulated copper conductor, unarmoured telephone cables in existing surface / recessed pvc conduit as required 1.16.2 2 pair 1.21 s / f pvc conduit: supplying and fixing of following sizes of pvc conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recess conduit as required. 1.21.1 20 mm 1.24 s / f modular type switch / socket : supplying and fixing following modular type switch / socket on the existing modular switch / socketon the existing modular plate& switch box including connections but excluding modular plate etc. as required. 1.24.4 3 pin, 5 / 6 amps socket outlet 1.24.5 6 pin, 15 / 16 amps socket outlet 1.24.6 telephone socket outlet 1.24.8 bell push 1.27.1 s / f modular boxes, base & cover plate: supplying and fixing following size / modules, gi box along with modular base & cover plate for modular switches in recess as required. 1 or 2 module ( 75 mm x 75 mm ) 1.31 s / f light plug point modular type accessories: supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5 / 6 amps modular socket outlet and 5 / 6 amps modular switch, connection, painting etc. as required. ( for light plugs to be used in non residential buildings. ) 1.32 s / f power plug point modular type accessories: supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5 / 6 & 15 / 16 amps modular socket outlet and 15 / 16 amps modular switch, connection, painting etc. as required. 5.4 supplying and fixing replaceable compact commercial batten suitable for single tb led tube complete with 20 watt led polycarbonate tb tube with built in driver etc. directly on wall / ceiling including connections with 1.5 sq. mm fr pvc insulated copper conductor etc. as required. 1.37 providing and fixing ding dong call bell suitable for single phase, 230 volts complete as required. 8.15 supply and installation of regular / standard model a.c. ceiling fan of 1200 mm sweep with service value ( cm / mm ) minimum 4.00, air delivery minimum 270 cum / min including wiring the down rods of standard length ( upto 30 cm ) with 1.5 sq mm fr pvc insulated copper conductor etc as required. 5.7 supplying and fixing recess mounted following types led downlighter with minimum efficacy 100 lm / w in pressure die cast aluminium housing and integrated electronic driver etc directly on ceiling including connections with 1.5 sq.mm frls pvc insulated copper conductor cable etc as required. 5.7.1 5 / 7 watt 5.7.5 18 watt 5.9 supplying and fixing recess mounted 36 watt led flat panel ( 2 x 2 ) with minimum efficacy 100 lm / w which provides soft light and glare free symmetrical illumination suitable for armstrong / grid ceiling and integrated electronic driver etcdirectly on false ceiling including connections with 1.5 sq.mm frls pvc insulated copper conductor cable etc as required. 5.11 supplying and fixing wall mounted light bracket / fixture made with polycarbonate suitable for single 9 / 10 watt led lamp directly on wall including connections etc as required. ( but without lamp ) 6.1.6 supplying and fixing of following types lamp in the existing electrical fitting / fixtures etc. as required. 14 / 15 watt cfl lamp. 2.12 s / f c series, sp mcb: supplying and fixing following rating, 240 / 415 volts, c curve, miniature circuit breaker, suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. 2.12.1 6 / 32 amps, single pole 2.12.2 6 / 32 amps, spn 2.12.4 6 / 32 amps, triple pole and neutral 2.12.8 40 amps, triple pole and neutral 2.19 supplying and fixing 20amp 240 volts spn mcb industrial type, power socket with 25amp spn mcb and 25 amps top in proper size steel box and plate as required. all complete as per instructions of elec.er. / architect. 8.11 supply and fixing of fabricated electrical control panel of cubical construction, floor / wall mounted type, fabricated out of 16 swg crca sheet, compartmentalised with hinged doors, dust and vermin proof, powder coated painting of approved shade after 7 tank treatment process, cable alley, internal wiring, earth terminals, bus bar chamber, insulator and complete in all respect etc and panel manufactures must be approved by cpri. ( but without ryb inicator, ammeter, voltmeter, inter connection copper conductor cable / solid copper strip, switchgears etc. ) ...

Due Date : March 21, 2024

Tender Value : ₹ 12.47 Crore

View Tender
23
East Central Railway - Bihar

42927680 supply of nylon rope ladder completenylon rope ladder complete,nylon rope ladder complete with 1 inch dia, aluminium steps as per design. nylon rope of 25mm di a.with steps of 25 mm dia. aluminium alloy corrugated tubing spaced at 12 inch c/c duly packed on both sides si ze 20feet long with hook for hanging. make sumer or similar. [ warranty period: 30 months after the date of delivery ]...

Due Date : March 20, 2024

Tender Value : ₹ Ref. Documents

View Tender
24
Infrastructure Development Authority - Bihar

42524720 ( re tender ) supply and installation of various equipments, plants & machineries for the development of metal craft cluster in parev, bihta, patna 1 melting furnance for brass utensils making raw material digitally controlled induction melting system superior built up with advanced ultrafast melt technology. includes igbt modules, filter capacitors, control and feedback cards, tank capacitors and necessary all fitting in cnc cutting bending sheet metal heavy duty structure. heavy duty furnace crucible suitable to melt up to 500kg copper / brass hydraulic mechanism, water cooled copper connections cf hose, busbar.50 kw / 3000hz melting operation monitoring system water fails led indication auto tripping for over load voltage & phase indication temperature monitoring phase indication all necessary interlocking system fault indication with inbuilt pictures to better understanding built with quality spares to minimize failure proper layout of internal fittings for easy maintenance ability to melt various metals instant start / stop earth leakage protection for operator safety input voltage : 420±05% ac 3 phase absorbed power : 50 kw melting temreture 1200˚c maximum power capacity 100 / 125kw frequency 3200hz line power factor 0.98 and above required input kva for induction panel 115 / 140kva melt rate 240 / 300 kg / hr for copper required power connection for induction panel 415v, 3 phase, 50hz matching crucible size 300kg, 200kg, 250kg, 100 kg control panel cabinet, section of circuit breaker & rectifier, inverter section, ground metal leak detector, monitor module internal water structure hydraulic power pack input line frequency : 50 / 60 hz operating frequency : 01 03 khz cooling system : water cooling power switch : igbt ( advance power saving ) generator efficiency : more than 95% power factor 0.95 to 98 dm water circulation unit for power supply unit & coil consisting of plate type heat exchanger valve, temo. meter and pressure meter dm water circulation pump dm water tank standard interconnecting pipes with cooling tower & reheating facilites 2 2 hi hot rolling mill 1 ) material to be rolled : brass / copper ( commercial grade ) 2 ) input sheet thickness : 38 mm max. 3 ) output sheet thickness : 6.00 mm minimum 4 ) sheet width : 914 mm max. ( 36” ) 5 ) size 15 x 36 heavy for brass 6 ) rolling speed : 61 metres / minute ( 200 ft. / min 7 ) roll barrel : 380 390 mm dia x 914 mm long 8 ) main bearings : gun metal bushes 9 ) reduction gear : open gears – ratio = 1 : 6 app 10 ) joda gear : 17.5” dia; 8” face 11 ) screw down : manual bevel gear reduction 12 ) bush / bearing : gun metal 13 ) roll balancing : through springs 14 ) main motor ( client scope ) : ac spdp slip ring motor – 75 / 100 hp; 960 rpm 3 phase; 415v; ac with starter 15 ) production : 8 10 m.t. per shift ( 35 mm to 8 mm ) on 8 10 kg.sheet weight 3 2hi cold rolling mill 1 ) material to be rolled: for brass . 2 ) input sheet thickness : 12 mm max. 3 ) output sheet thickness : 1.50 mm average 4 ) sheet width : 940 mm max. ( 37” ) 5 ) size 16 x 40 6 ) rolling speed: 50 metres / minute ( 165 ft. / min ) 7 ) roll barrel: 425 430 mm dia x 1016 mm long 8 ) main bearings: 23048 x 2 spherical roller bearings 9 ) gear box cum pinion stand : double stage gear box ( ratio = 1:18 ) ; cd = 850 +; 10 ) hp rating = 120 hp; vertical cd = 430 mm ±5 11 ) screw down : manual bevel gear type 12 ) drive : to both rolls through universal coupling spindle 13 ) roll balancing : through springs 14 ) main motor : ac 3 phase; spdp slipring; 75 hp; 960 rpm with protection 4 deep drawing hydraulic / mechanical press 28 max circle size : 28 body m.s. fabrication bed size 32 x 32 x 75mm main rod 140mm holder rod 70mm standard motor 20hp ( 1440 rpm ) deep 14 oil tank 500 ltr weight app 3.5 to 4 tone 5 deep drawing hydraulic / mechanical press 36 mode : semi automatic , electrical panel max circle size : 36 max mat thikness : 10 gauge type of frame : h type no of cly : 07.no max purch size : 18 max dlay capacity : 6 main cly rani size : 180mm cap : 80 ton blank holding cly ram size : 70mm cap : 16 tan qti : 4.no retaucly : 50mm ram siz qty : 2 nos pressure plate : 36x 32x5 ( 1 nos ) die ring : extra motor : 30 hp hydraulic tank capacity 600 700 ltr 6 motorised circle cutting machine motorized cutting for 36 dia of 5mm thick brass plate of standard make as per is specification. manual type of machine sheet metal cutting machine cutting thickness 5mm mode circle cutting capacity 150mm automation grade automatic voltage 220v / 380v rated power 7.5 h.p 7 laser square cutting machine high precision machine worktable the deviation of worktable levelness is within ± 0.01mm. so the worktable will be hard to be out of shape during a longer period working high cutting aceleration and precision max cutting acceleration for this machine can be up to 1.6 guage, which can ensure the machine cuts corners or turning points very smoothly, higher cutting precision and speed intelligent dust & particles extraction system it helps to extract the dust and metal particles to protect the laser equipment. this design can concentrate the extraction power onto the only one working cell to increase the extraction capacity. solid machine body heat treatment to strengthen the intensity and stiffness of base. cnc control system cypcut laser source raycus / max laser head raytool drive delta servo motors reducer italy motovarop computer with original laser software wifi function available standard accessory water chiller, exhaust blower, protective mirror 8 scrubbing & polishing machine semi automatic with capacity to scrub and polish 100 150 jobs simultaneously of standard make as per is specification. industrial buffing and polishing machines suitable to smooth rough edges and finishing of small particles suitable for polishing hardware, workpieces, sanitary industry, auto parts, household appliances, valves and so on the spindle can assemble the rubber, cloth, hemp, and sand wheel and sand belt, of diameter ≤400mm & breadth ≤ 100mm 9 spinning lathe machine 6 fthevy duty spinning machine center hieight 13 spindle thread size 1.3 / 4 6 tpi with t slide attachment with 3 hp isi make ie 2 electric motor belt pulley switch fitting 10 electronic weighing machine material steel serier platform scale type heavy load cell platform usage weighing capacity 100kg to 500kg use industrial, poweder coated body display type led 11 air cooled single sided spot welder operated : pedestal power : 10 kva welding capacity : 1.5 +1.5mm mild steel input voltage : 220v / 380v ( 50hz ) protection fuse : 220v 40a / 380v 25a power level : 5 arm length : 500mm arm diameter : 40mm power input cable : 3m protection class : ip21 diamension : 380mm x 1000mm x 1050mm weight : 142 kg 12 computer / desktop dell / hp / lenovo, intel core i5 ( 11th ) processor, ram 16gb, hdd 1tb, windows 11, ms office 2022 with inventory software performance processor intel core i5 memory 1 x 8 udimm ddr4 3200 max memory up to 32gb ddr4 3200 storage 512 gb connectivity integrated 100 / 1000m wlan + blutooth wi fi 6, 11ax2x2+bts software windows 11, home single language, english 13 cctv 8 channels and 1 hdd 1u acusense dvr supports false alarm reduction based on deep learning algorithm efficient h.265 pro+ compression technology encoding ability up to 4k @ 7.5 fps / 3k@12fps up to 12 network cameras can be connected 5 signals input adaptively ( hdtvi / ahd / cvi / cvbs / ip ) 14 biomatric device face capacity : 3000 1 ( n ) , 3000 ( 1:1 ) fingerprint capacity : 2000 id card capacity : 10, 000 push data : yes communication : tcp / ip, rs 232 / 485, usb host display 4.3 touch screen standard function : automatic status switch, self service querry, work code, sms, dst, t9 input, 9 digit user id, scheduled bell, photo id access control interfaces for : 3rd party electric lock, door sensor, exit button, alarm wiegand single : output optional function : mi fare card, wi fi, 3g, 2000mah battery backup power supply : 12v 3a 15 printer cum scanner function printer, copy, scan hp pcl 6, hp pcl 5e, hp postscript level 3 emulation, pdf, urf, pwg raster 1 gigabit ethernet 10 / 100 / 1000 base tx network; 1 hi speed usb 2.0 ( device ) ; 1 hi speed usb 2.0 ( host ) ; 1 wi fi 802.11ac ( dual band ) ; 1 wi fi direct; walk up usb; auto crossover ethernet mobile printing capability hp smart app; apple airprint™; mopria™ certified; wi fi® direct printing; hp smart app and other mobile apps network capabilities yes, via built in 10 / 100 / 1000base tx ethernet, gigabit; auto crossover ethernet; authentication via 802.1x; 802.11ac ( wi fi 5 ) minimum system requirements 2 gb available hard disk space, internet connection or usb port, internet browser. for additional os hardware requirements see microsoft.com; display 4.3” diagonal wled backlit anti glare ( 480x272 ) scanner type flatbed, adf scanner file format pdf; jpg; tiff enhanced scanning resolution up to 1200 dpi 16 office furniture ( executive table 2 number, executive chair 2 number, visitor chair 6, storage cabinet 1 with closed door ) of standard make as per is specification. excutive table material –mdf / wooden shape l shape usage / application office table thickness table made with 25mm thickness board edge binding with 2 mm pvc, side storage unit made with 18mm board edge binding with 2mm pvc tape. table height 2 2.5 feet a ) excutive chair dimension 76.1 x 114 128.2 x 76.1 unpholstery material fabric finish color multiple colour option seat heat 45.4 55.4 self certification green guard, indoor advantage b ) visitor chair chair type visitor usage / application office arm type adjustable arm permanent contact mechanism the chair also has an option of a permanent contact mechanism, which allows the back to flex naturally as you recline, for maximum comfort and relief. plastic seat / back cover specially designed plastic seat / back cover to give a modern and aesthetic look. pronged base it is having the 5 pronged base for better stability of the chair ergonomic back:ergonomically designed back support to support your back and avoid strain. c ) storage cabinet with closed door size 78 x 36 x 19 usages / application offices, industries, school etc.. design type standard no of door 2 material mild steel weight 30 to 100kg surface finishing polished thickness 10 50mm height 5 8 feet 17 solar power maximum power ( pmax ) 335 w maximum power voltage ( vmp ) 37.6 v maximum power current ( imp ) 8.91 a open circuit voltage ( voc ) 46.3 v short circuit current ( isc ) 9.39 a tolerance positive only module efficiency 17.01% dimensions 1960 x 990 x 35mm weight 22.2 kg noct ( nominal operation temperature ) : 47 + 2°c temperature coefficient of voc ( ß ) : 0.35% / °c temperature coefficient of isc ( a ) : +0.05% / °c temperature coefficient of pmax ( y ) : 0.45% / °c operating temperature : from 40° to 85° maximum series fuse rating 15 a iec application class iec 61215, iec 61730, iec 61701, iec 62804 maximum system voltage 1000v dc ( iec 61215 ) , 600v ( ul 1703 ) solar cells poly no. of cells 72 cells ( 12*6 ) glass low iron, tempered glass, 3.2mm frame anodized aluminum alloy junction box ip65 / 67 rated cable & plug connectors 1.1 x 4.0mm2 mc4 compatible / ip 67 maximum snow load 2400 pascal maximum wind load 5400 pascal hailstone impact test 80 km / h for 25mm ice ball for 12 kva 18 testing lab setting up of testing lab for brass utensil making at raw material stage, melting stage, semifinished stage and finished stage of the utensils including supply and installation of spectrometer and all other allied equipments. ( specification: multi charged coupled device ( ccd ) spectrometer including sample polishing machine, pc for spectrometer, printer, ups of required capacity, stand, various regulators of standard make and as per is specification. 19 hand tools a polishing machine with buffing wheels. electric buffing for brass utensils polish machine centre heights 11 with fabricated stand 2 hp electric motor belt pulley fitting 3 hp buffing motor b grinding machine standard grinding wheels. bench grinding; 6 wheel dia bench grinder 0.5 hp 2800 rpm 6 wheel size pedestal c hammer ball pen with handle handle material wooden / teflon head weight 250gm, 500gm, 1kg, 2kg, 5kg head material stainless steel hevey duty forge handle length 12 d tongs material harden power manual application crucible pickup sizes 4ft, 3.5ft, 3ft, 2.5ft, 2ft 20 industrial exhaust fan suitable for single phase types of product air ventilator size 24 material gi no. of fins 43 fins 21 balti ( bucket ) dies cutting dies, sizes 8, 10, 12, 14, 16, 18, 20, 22, 24, 22 handi ( mumbaiya ) dies cutting dies, sizes 8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30, 32, 34, 36, 38, 40 23 parat dies cutting dies, sizes 14”, 16, 18, 20, 22, 24 topia ( barguna ) dies cutting dies, sizes 18, 20, 22, 24, 26, 28, 30, 32, 34, 36, 38, 40 25 pitalthali ( for puja ) dies cutting dies, sizes 8, 10, 12, 14 26 dies for water jug jug capacity 1 litre, 1.5 litre, 2litre 27 dies for kalash cutting dies, sizes 20” , 22, 24, 26 28 dies for gagra ( pitchure ) cutting dies, sizes 18”, 20, 22, 24 29 katkithali dies cutting dies, sizes 10”, 12, 14 30 dies for thermos flask capacity 1 ltr, 1.5 ltr, 2 ltr 31 silent dg set 50 kva frequency 50 power factore 0.8 voltage 415 3ф governing class g2 noise level <75 fuel consumption at 100% loaf 14.1, at 75% load 11.3, at 50% load 7.5 fuel tank capacity 150 ltr weight of genset with canopy dry 1470, wet 1600 overall diamension of genset 2900 ( l ) x 1100 ( w ) x 1581 ( h ) electrical battery starting voltage 12 no. of cyclinder 4 cubic capacity 3.24 ltr bore x stroke 96 x 112 mm rated speed 1500 rpm aspiration ta lube oil change period 500 hrs lube oil sump capacity 10 ltrs insulation class class h alternator efficiency 91 max voltage dip at full load 0.8 pf lag < 20% 32 silent dg set 100 kva frequency 50 power factore 0.8 voltage 415 3ф governing class g2 noise level <75 fuel consumption at 100% loaf 21.9, at 75% load 16.9, at 50% load 12.2 fuel tank capacity 230 ltr weight of genset with canopy dry 2040, wet 2240 overall diamension of genset 3200 ( l ) x 1300 ( w ) x 1795 ( h ) electrical battery starting voltage 12 no. of cyclinder 4 cubic capacity 4.32 ltr bore x stroke 105 x 125 mm rated speed 1500 rpm aspiration ta lube oil change period 500 hrs lube oil sump capacity 14 ltrs insulation class class h alternator efficiency 92 max voltage dip at full load 0.8 pf lag ≤ 20%...

Due Date : March 06, 2024

Tender Value : ₹ 6 Crore

View Tender
25
East Central Railway - Bihar

42236977 supply of aluminium alloy cast arm rest right hand with fiber molded green colour top of lhb chair car of shatabdi coaches.spec: drg. no. judw / mech / 14 649. [ warranty period: 30 months after the date of delivery ] ...

Due Date : March 11, 2024

Tender Value : ₹ Ref. Documents

View Tender
26
East Central Railway - Bihar

42118702 supply of nylon rope ladder complete with 1 dia.nylon rope ladder complete with 1 dia.,nylon rope ladder complete with 1 dia. aluminum steps as per design. nylon rope of 25mm dia. with steps of 25mm dia. aluminum alloy corrugated tubing spaced at 12 c/c duly packed on both sides size 20 feet long with hook for hanging. make any reputed make [ warranty period: 30 months after the date of delivery ] => limited...

Due Date : February 21, 2024

Tender Value : ₹ Ref. Documents

View Tender
27
Northeast Frontier Railway - Bihar

41950274 supply of gravity cock as per drg.no. icf drawing no: icf/ sk 6 3 369, alt f/2 item 1, specn: material specification : aluminium alloy.gravity cock as per drg.no. icf drawing no: icf/ sk 6 3 369, alt f/2 item 1, specn: material specification : aluminium alloy.,gravity cock as per drg.no. icf drawing no: icf/ sk 6 3 369, alt f/2 item 1, specn: material specification : aluminium alloy. [ warranty period: 30 months after the date of delivery ] => limited...

Due Date : February 07, 2024

Tender Value : ₹ Ref. Documents

View Tender
28
Eastern Railways - Bihar

41925501 supply of alloy hex lock nutalloy hex lock nut,25mm dia al. alloy coupler to is:1285 (latest) with desgn. 63400 condition t6 (new) of table 2 threads as per table 1 of is 14763 (latest), with is 14768 part 1 clause 6.3.3 (medium mechanical stresses), clause 6 table 1 s.no. (vi) for temperature classification, clause 6.8.1.4 (protection against dust) and clause 6.9.3 (with declared tensile strength for 10 kg load) and dimensions to is:14768 part 2 (latest). the length of the coupler shall be as per is:14768 part 2 latest fig.102 marked x that is 25 mm long. [ warranty period: 30 months after the date of delivery ] , 40mm dia al. alloy coupler is:1285 (latest) with desgn. 63400 condition t6 (new) as per drg.no. of table 2, with threads asper table 1 of is:1476 firms offer : as per indian standard is 14768 length of the coupler will be 35 mm. [ warranty period: 30 months after the date of delivery ] , 40mm dia al. alloy hex lock nut to is:1285 (latest) with desgn. 63400 condition t6 (new) of table 2, with thread as per table 1 of is 14763 (latest), with is 14768 part 1 clause 6.3.3 (medium mechanical stress), clause 6 table 1 s.no.(vi) for tempreture classification, clause 6.8.1.4 (protection against dust) and clause 6.9.3 (with declared tensile strength for 10 kg load) and dimension to tab.6 of is:3837 (latest) [ warranty period: 30 months after the date of delivery ] , aluminium alloy conduit (25mm dia, wall thickness 2.0 mm) of threadable quality to designation 63400 of table 1 and condition t6 (new) or wp (old) of table 2 of is:1285 (latest suitable for electrical wiring, dimension and marking shall conform to clause 7.6 of is:9537 latest part ii. the supply of conduit shall be in standard length of 4 meters. [ warranty period: 30 months after the date of delivery ] , 25mm dia aluminium alloy hex lock nut to is:1285 (latest) with designation 63400 condition t6 (new) of table 2, with threads as per table 1 of is 14763 (latest),with is 14768 part 1 clause 6.3.3 (m...

Due Date : February 12, 2024

Tender Value : ₹ Ref. Documents

View Tender
29
Eastern Railways - Bihar

41126432 supply of alloy hex lock nutalloy hex lock nut,25mm dia al. alloy coupler to is:1285 (latest) with desgn. 63400 condition t6 (new) of table 2 threads as per table 1 of is 14763 (latest), with is 14768 part 1 clause 6.3.3 (medium mechanical stresses), clause 6 table 1 s.no. (vi) for temperature classification, clause 6.8.1.4 (protection against dust) and clause 6.9.3 (with declared tensile strength for 10 kg load) and dimensions to is:14768 part 2 (latest). the length of the coupler shall be as per is:14768 part 2 latest fig.102 marked x that is 25 mm long. [ warranty period: 30 months after the date of delivery ] , 40mm dia al. alloy coupler is:1285 (latest) with desgn. 63400 condition t6 (new) as per drg.no. of table 2, with threads asper table 1 of is:1476 firms offer : as per indian standard is 14768 length of the coupler will be 35 mm. [ warranty period: 30 months after the date of delivery ] , 40mm dia al. alloy hex lock nut to is:1285 (latest) with desgn. 63400 condition t6 (new) of table 2, with thread as per table 1 of is 14763 (latest), with is 14768 part 1 clause 6.3.3 (medium mechanical stress), clause 6 table 1 s.no.(vi) for tempreture classification, clause 6.8.1.4 (protection against dust) and clause 6.9.3 (with declared tensile strength for 10 kg load) and dimension to tab.6 of is:3837 (latest) [ warranty period: 30 months after the date of delivery ] , aluminium alloy conduit (25mm dia, wall thickness 2.0 mm) of threadable quality to designation 63400 of table 1 and condition t6 (new) or wp (old) of table 2 of is:1285 (latest suitable for electrical wiring, dimension and marking shall conform to clause 7.6 of is:9537 latest part ii. the supply of conduit shall be in standard length of 4 meters. [ warranty period: 30 months after the date of delivery ] , 25mm dia aluminium alloy hex lock nut to is:1285 (latest) with designation 63400 condition t6 (new) of table 2, with threads as per table 1 of is 14763 (latest),with is 14768 part 1 clause 6.3.3 (m...

Due Date : January 15, 2024

Tender Value : ₹ Ref. Documents

View Tender
31
East Central Railway - Bihar

41068182 supply of aluminium alloy cast arm rest right hand with fiber molded green colour top of lhb chair car of shatabdi coaches.spec: drg. no. judw / mech / 14 649. [ warranty period: 30 months after the date of delivery ] ...

Due Date : January 08, 2024

Tender Value : ₹ Ref. Documents

View Tender
32
Airports Authority Of India - Bihar

40680860 tender for miscellaneous unforeseen ss works at jpni airport, patna; 1 supply of following size of 1.1 kv grade xlpe insulated, pvc sheathed, armoured aluminium conductor cable conforming to is: 7098 ( part 1 ) amended upto date etc complete as required. 2 4cx 25 sq.mm 3 3cx 16 sq.mm 4 supply loop in and loop out outdoor type cable junction box made ofhard thermoplastic polycarbonate having suitable for entry & exit 4cx25 / 3.5cx35 sqmm sq.mm cable, size 300mm x 150mm x 170mm ( lxbxh ) , ingress protection ip66, uv resistanc, flame retardant, ik08, glow wire tested at minimum 960 deg.c as per latest iec code, temp range upto 60 deg c, halogen free, self extinguishing etc. and suitable for perimeter light pole installation etc complete as required. 5 supply of 1x25watt led perimeter light fixture, cct 5700k, cool day light with all accessories including matt grey / black powder coated pressure die cast aluminium alloy housing having effective heat sink for heat dissipation, heat resitant toughened tempered glass with gasket and ss clips to ensure ingress protection, leds are provide with secondary lens optics to get optimum optical performance, driver designed with built in surge voltage, open / short circuit protections & external 10 kv surge protection provided for safety and suitable to works 230v, 50 ac hz supply etc and suitable to fixing on 38mm od arm etc. complete as per tender specifications. 6 supply of 1x200w led flood light luminaries, cct 5700k, cool day light with all accessories including matt grey / black powder coated pressure die cast aluminium alloy housing having effective heat sink for heat dissipation, heat resitant toughened tempered glass with gasket and ss clips to ensure ingress protection, leds are provide with secondary lens optics to get optimum optical performance, driver designed with built in surge voltage, open / short circuit protections & external 10 kv surge protection provided for safety, ms mounting bracket fixed on housing for aiming adjustment and suitable to works 230v, 50 ac hz supply etc complete as per tender specifications. 7 supply of1x40w led post top lantern with spun aluminium canopy and made in die cast aluminium housing with decorative clear opal acrylic diffuser for symettric light distribution with ip65 protection etc. suitable to works on 230v, 50hz, ac supply etc. complete as per tender specifications. 8 erection of perimeter light aluminum pole with 2 nos.bracket upto height 2.4 mtr along with tiltable base flange on existing foundation with supply & fixing of grouting ascessories of pole i.e 4nos. 0.5 dia l type steel foundation bolts of designated 2 feet length with nuts, 2 nos. metalic fastnerduring c.c. foundation work i / c alignment, tightening, etc complete as required as directed by eic.job excluding of c.c. foundation work. 9 installation, testing and commissioning of1x 45w led street light fittings with all accessoriesetc. with provision of suitable gi / ms pipe, clamping on wall surface or as per site requirement including connectionswith suitable pvc insulated, copper conductor cable etc. complete as required. 10 installation, testing & commisssioning of led street light fixtures upto 25 watt luminaire with all accessories on the existing bracket of al perimeter light pole including making connection from loop cable junction box to fittings by 3cx1.5 sq.mm. pvc insulated copper conductor flexible cable etc. complete as required. 11 installation, testing & commisssioning of 200w led flood light luminaries with all accessories on the existing ms structure with making suitable arrangement for fixing with nuts bolts or welding / driling including making connection of existing perimterlight loop cable junction box or switch board to fittings by 3cx1.5 sq.mm. pvc insulated copper conductor flexible cable upto 3 mtr etc. complete as required as per direction of eic. 12 installation, testing and commissioning of 1x40w led post top lantern with all accessories and make suitable arrangement to fixing on existing pole or strucure etc. as per site requirement including connections etc. complete as required. 13 installation, testing and commissioning of loop in and loop out thermoplastic / polycarbonate cable junction box size of size 300mm x 150mm x 170mm and secured with proper holding clamps, nuts, bolts on existing aluminium perimeter light pole at suitable height i / c inside the box supply & fixingsuitable 4way x 100a stud type power bakelite connector for termination of 4cx25 sq.mm al cable, earth terminal, 6a, 10 ka, sp mcb ( 1 no. ) mounting on din rail for installation with connection, alignment, tightening etc complete as required. 14 laying of following size hdpe pipe including coupling etc. of pipe in existing trench for the protection of cable etc complete as required as directed by eic. 15 upto 50mm dia. 16 above 50mm dia. and upto 110mm dia. 17 supply and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required. 18 4c x 25 sq.mm ( 28 mm ) 19 3.5c x 35 sq. mm ( 32mm ) 20 3.5c x 50 sq. mm ( 35mm ) 21 3.5c x 70 sq. mm ( 38mm ) 22 3.5c x 185 sq. mm ( 57mm ) 23 supply and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required. 24 4c x 25 sq.mm 25 3.5c x 35 sq. mm 26 3.5c x 50 sq. mm 27 3.5c x 70 sq. mm 28 3.5c x 185 sq. mm 29 laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing rcc / hume / metal / hdpe pipe as required. 30 upto 35 sq. mm 31 above 35 sq. mm and upto 95 sq. mm 32 above 95 sq. mm and upto 185 sq. mm 33 laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required. 34 upto 35 sq. mm 35 above 35 sq. mm and upto 95 sq. mm 36 above 95 sq. mm and upto 185 sq. mm 37 laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on wall surface as required. 38 upto 35 sq. mm ( clamped with 1mm thick saddle ) 39 above 35 sq. mm and upto 95 sq. mm ( clamped with 25x3mm ms flat clamp ) 40 earthing with g.i. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal / coke and salt as required. 41 providing and laying earth connection from earth electrode with 6 swg dia g.i. wire in 15 mm dia g.i. pipe from earth electrode including connection with g.i. thimble excavation and re filling as required. 42 providing and fixing 6 swg dia g.i. wire on surface or in recess for loop earthing along with existing surface / pipe / cable etc as required. 43 earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal / coke and salt as required. 44 providing and fixing 25 mm x 5 mm copper strip on surface or in recess for connections etc. as required. 45 providing and fixing 25mm x 5mm copper strip in 40mm dia gi pipe from earth electrode inclunding connection with brass nut, bolt, spring, washer excavation and re filling etc as required. 46 providing and laying in position cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) in foundation of perimeter light pole, feeder pillar etc including form, shuttering, finishing work etc complete as required. 47 providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 ( 1 cement: 3 fine sand ) at all levels. 48 steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete as required.thermo mechanically treated bars of grade fe 500d or more. 49 excavation for cable trenches / foundation of depth upto 1.2 m in soft soil including refilling of getting out the excavated soil and disposal of surplus excavated soil within a lead of 50 metres as directed by eic. 50 excavation of hard rock for cable trench including cutting the bituminus / concrete surface getting out and disposal of excavated soil as directed by eic. 51 supply of single dome integral led aviation red light comprising of aluminium housing with polycarbonate enclousre / uv stablized arcylic cover, ip65 protection, electronic drive etc. to works on 230v, 50 hz, ac supply etc complete as required. type: bgav 302 led, make: bajaj or equivalent. 52 installation, testing and commissioning of single dome led aviation light fittings with provision of suitable gi / ms pipe with clamping on wall surface or as per site requirementincluding making connection of existingswitch board to fittings by 3cx1.5 sq.mm. pvc insulated copper conductor flexible cable upto 3 mtr etc. complete as required as per direction of eic. 53 supply and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 54 5 / 6 amps switch 55 15 / 16 amp switch 56 3 pin 5 / 6 amp socket outlet 57 6 pin 15 / 16 amp socket outlet 58 supplying and fixing following size / modules, gi box alongwith modular base & cover plate for modular switches in recess etc as required. 59 3 module ( 100mmx75mm ) 60 6 module ( 200mmx75mm ) 61 wiring for circuit / submain wiring alongwith earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface / recessed medium class steel conduit complete as required 62 2 x 4 sq. mm + 1 x 4 sq. mm earth wire 63 4 x 4 sq. mm + 2 x 4 sq. mm earth wire 64 supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box / wooden block including connection etc as required. 65 supply and fixing of following size of medium class pvc conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed cinduit as required. 66 25 mm 67 supply of power cable of 1.1kv grade of following sizes copper conductor pvc insulated pvc sheathed un armoured power cable confirming to is:694 with upto date ammendments etc complete as required. 68 3c x 1.5 sqmm 69 3c x 2.5 sqmm 70 laying one number power cable of 1.1 kv grade upto size 3c x 2.5 sqmm in existing hdpe / gi pipe / open masnory duct / tray / open surface / trench / false ceiling / wall surface with suitable metal saddle etc including proper termination etc complete as required. 71 supplying and making outdoor end termination with cast resin compound including aluminium lugs and other jointing materials for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required. 72 3.5c x 185 sq. mm 73 painting with aluminium paint of approved brand and manufacture to give an even shade of two or more coats on existing perimeter light pole including 2 nos.bracket upto height 2.0 mtr including pole numbering and black enamel painting to tiltable ms base plate etc complete as required.. 74 providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth etc. complete as required. 75 finishing walls with acrylic smooth exterior paint of required shade:new work ( two or more coat applied @ 1.67 ltr / 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg / 10 sqm ) 76 demolishing / cutting cement concrete / bitumins surface by manually / mechanical including disposal of material within 50 metres lead as directed. 77 dismantling of existing loop in and loop out metalic cable junction box of perimeter light pole including cable disconnection and handing over to aai store in good condition within airport premises etc. complete as required....

Due Date : November 29, 2023

Tender Value : ₹ 16.89 Lakhs

View Tender
33
Eastern Railways - Bihar

40474472 supply of alloy hex lock nutalloy hex lock nut,25mm dia al. alloy coupler to is:1285 (latest) with desgn. 63400 condition t6 (new) of table 2 threads as per table 1 of is 14763 (latest), with is 14768 part 1 clause 6.3.3 (medium mechanical stresses), clause 6 table 1 s.no. (vi) for temperature classification, clause 6.8.1.4 (protection against dust) and clause 6.9.3 (with declared tensile strength for 10 kg load) and dimensions to is:14768 part 2 (latest). the length of the coupler shall be as per is:14768 part 2 latest fig.102 marked x that is 25 mm long. [ warranty period: 30 months after the date of delivery ] , 40mm dia al. alloy coupler is:1285 (latest) with desgn. 63400 condition t6 (new) as per drg.no. of table 2, with threads asper table 1 of is:1476 firms offer : as per indian standard is 14768 length of the coupler will be 35 mm. [ warranty period: 30 months after the date of delivery ] , 40mm dia al. alloy hex lock nut to is:1285 (latest) with desgn. 63400 condition t6 (new) of table 2, with thread as per table 1 of is 14763 (latest), with is 14768 part 1 clause 6.3.3 (medium mechanical stress), clause 6 table 1 s.no.(vi) for tempreture classification, clause 6.8.1.4 (protection against dust) and clause 6.9.3 (with declared tensile strength for 10 kg load) and dimension to tab.6 of is:3837 (latest) [ warranty period: 30 months after the date of delivery ] , aluminium alloy conduit (25mm dia, wall thickness 2.0 mm) of threadable quality to designation 63400 of table 1 and condition t6 (new) or wp (old) of table 2 of is:1285 (latest suitable for electrical wiring, dimension and marking shall conform to clause 7.6 of is:9537 latest part ii. the supply of conduit shall be in standard length of 4 meters. [ warranty period: 30 months after the date of delivery ] , 25mm dia aluminium alloy hex lock nut to is:1285 (latest) with designation 63400 condition t6 (new) of table 2, with threads as per table 1 of is 14763 (latest),with is 14768 part 1 clause 6.3.3 (m...

Due Date : November 27, 2023

Tender Value : ₹ Ref. Documents

View Tender
34
Military Engineer Services - Bihar

40135204 tender for special repair to bldg no p 86 at ota gaya; 1 demolition of cement concrete ( unreinforced ) in ground floors and pavings n exc 15 cm thickness ( below or above ground level ) . 2 demolition of brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. 3 taking down cement plaster on brick or stone walls etc, including racking out joints, hacking for key, scrubbing down with water etc. 4 dismantling floor, hearth or wall tilling including cement mortar bedding , removing serviceable tiles to store and rubbish off the premises. 5 taking down chowkat or frame with shutter ( without taking off shutters from the frames ) areaexceeding 1.5 sq mtr but not exceeding 4 sq mtr each 6 taking down chowkhats or frames not exc. 1.5 sq. m each but with shutters ( without taking off shutters from the frames ) . 7 dismantling water tanks of capacity exc 500 & not exc 1000 litres and removing to store. 8 taking up or down 15mm dia bore steel tubing and connections, including cleaning for refixing or removal to store. 9 taking up or down 20mm dia bore steel tubing and connections, including cleaning for refixing or removal to store. 10 dismantling of asbestos cement ( corrugated, semicorrugated, etc. ) sheets in roof coverings complete. 11 dismantling wrought iron or mild steel work of any description not otherwise provided for complete. 12 taking down eaves gutters and rainwater pipes ( any size or pattern ) , including all fittings, heads, shoes, bends, swan necks, etc., including cleaning or refixing or removal to store ( measured overall as fixed along the centre line over fittings and accessories ) 13 m & l for providing 75 mm thick pcc type c 1, 1 : 3 : 6, ( using 40 mm graded aggregate ) as sub base flooringand finishing surfaces even and smooth without using extra cement complete. 14 m & l for providing 50 mm thick pcc type c 2, 1 : 3 : 6, ( using 40 mm graded aggregate ) as inplinth protection and drain bed complete all as specified and directed. 15 m & l for providing precast cement concrete 1:2:4 type b 1 using 20mm graded stone aggregate as in landings, cover slabs ( for man holes etc ) and similar work including necessary formwork and set in cement mortar 1:6complete all as specified and directed. 16 m&l for brick work using sub class b old bricks straightor curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. 17 m&l for brick work using sub class b old bricks ( except bricks ) straightor curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. 18 m & l for 10 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces and finishing the surface even and smoth without using extra cement complete all as specified and directed. note : chicken wire mesh be provided to the joints of column and beams during rendering. 19 m & l for rendering 15mm thick in two layerson external surfaces on brick / concrete surfaces in cm 1:4 finished even and smooth without using extra cement with wpc. note : wpc measured and paid separatly andchicken wire mesh be provided to the joints of column and beams during rendering. 20 m & l for rendering 10mm thick internal surfaces on fair faces of brick or concrete surfaces in cement plaster 1:3 as in ceiling and finished even and smooth ( without using extra cement ) complete. 21 supply only liquid water proofing compound ( make : sika latex power ) 22 cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with finishing with cement mortar 1:3. 23 m & l for non skid ceramic coloured tiles 7 to 8 mm thick ( square / rectangular ) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cm 1:4 complete all as specified and directed. 24 m & l for coloured glazed ceramic tiles in vertical surface 450x300x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick screed bed in cm 1:3 complete all as specified and directed. 25 m & l for machine pressed chequered cement concrete tiles 30cm x 30cm x 30mm thick with grey cement and pigment over 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed. 26 m & l for machine pressed precast concrete interlocking paver block any shape and size confirming to is 15658 2006 of 60 mm thickness, m 35 grade with grey cement and pigment complete all as specified and directed. 27 sand filling under floors for cushioning including watering and consolidation complete all as specified and directed. 28 m & l for 25mm thick cement concrete type b 0, 1:2:4using 12.50mm graded stone aggregate as in levelling course complete all as specified and directed. 29 m & l for providing pcc type b1, 1 : 2 : 4, ( using 20 mm graded aggregate ) as incoping, and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. 30 s & f rolled mild steel in joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. ( cut to ordinary lengths i.e. within 20mm of the length indicated ) confirming to fe 410 w ( gde e 250 ) quality a complete. 31 s & f pre painted galvatume aluminum zinc coating gi based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified. 32 s & f solid pvc frame of size 50 mm x 47 mm made out of 5 mm single side prelam pvc sheet & edges will be printed to match with prelam sheet rein forced with ms square tube etc. 33 s & f factory made solid panel pvc door shutter 30mm ( style ) consisting of frame made out of m.s tubes for top and bottom rails m.s frame shall be covered with heat moulded plain colour pvc c channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour pvc sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour pvc sheets to be fitted in the m.s frame welded / sealed to the stiles and rails with suitable pvc sheet beading and joined together with solvent cement, supplying and fixing in the frame 34 s & f powder coated aluminium section for doors, windows, ventilators sliding / openable etc with joining cleat for fixing, locking arrangement, rubber beading, screws, etc including taking down and making the surface good complete all as specified.make : jindal / hindalco / indalco. note : ( i ) glazing and wire mesh shall be measured and paid separetely. ( ii ) item shall be paid as per weight of aluminium section ( iii ) the rate quoted shall be inclusive of the cost of neoprene beading, glazing pin, screws and powder coated fittings such as locking arraangement etc as required, which shall not be measured for arriving the weight ( iv ) the rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing. 35 s & f framed work such as grills, gratings, etc.. with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to fe.290.gde e 165 complete all as specified and directed. 36 taking down existing aluminium door or window shutter with frame area exceeding 1 sqm and re fixing in same opening after repair / replace the defective jointing cleats / screws and fittings etc all as per specified and directed by engr in charge. 37 s&f 100 mm long stainless steel butt hinges with steel hinge pin etc. 38 s&f 150 mm long aluminium anodised, barrel tower bolts of extruded section and 12 mm dia fixed. 39 s&f 150mm long aluminium anodised handle cast type and fixed d type 40 s&f250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple ( bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixedcomplete all as specified. 41 s&f white colour rotational three layer moulded polyethylene water storage tanks ( cylinderical vertical with closed top ) capacity 1000 ltrhoisted and fixed in position all as specified and directed. make; sintex / rotex / polycon 42 s & f in repair 25mm dia bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed. 43 s & f in repair 25mm dia bore cpvc gate valves with handle or wheel head, screwed both ends for pipe and fixed. 44 s & f in repair 20mm dia bore cpvc gate valves with handle or wheel head, screwed both ends for pipe and fixed. 45 supplying and laying of cpvc pipes 25mm outer dia sdr 11 & plain cpvc sdr 11 including all fittings on walls / ceilings or in floors including necessary cutting / chasing of walls and floors complete all as specified and directed. 46 s & f 25mm bore male brass threaded adaptor ( mta / mbta ) or female brass threaded adaptor ( fta / fbta ) complete. 47 supplying and laying of cpvc pipes 20mm outer dia sdr 11 & plain cpvc sdr 11 including all fittings on walls / ceilings or in floors including necessary cutting / chasing of walls and floors complete all as specified and directed. 48 s & f 20mm bore male brass threaded adaptor ( mta / mbta ) or female brass threaded adaptor ( fta / fbta ) complete. 49 s & f 110mm bore pvc ( swr ) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors and connecting with manholes or disposal place. 50 s & f 110mm dia borepvc ( swr ) bends with access door all as specified and as directed. 51 s & f of pvc ( swr ) junction single, ( single t ) 110 mm bore equal or unequal with acess door complete. 52 s & f 110mm bore pvc ( swr ) vent cowl with rubber ring joints, fixed to pipes all as specified. 53 s & f 75mm bore pvc ( swr ) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors and connecting with manholes or disposal place. 54 s & f 75mm dia borepvc ( swr ) bends with access door all as specified and as directed. 55 s & f of pvc ( swr ) junction single, ( single t ) 75 mm bore equal or unequal with acess door complete. 56 s & f as in repair of vitreous china squatting pan, ‘orissa’ pattern, size 580 x 440 mm white, with integral foot rests water closet ( squatt pattern ) complete including provision of lime concrete bedding complete all as specified and as directed make : hindware / parryware / cera 57 s & f in repair 10 litre capacity pvc valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete. 58 s & f in repair vitreous china wash basin, white, flat back of size 550x400mmexcluding taps, waste, chain and plug and porcelain stopper but including brackets, cutting for and pinning in ends of brackets or erecting stand and inclusive of fixing of supply and waste pipe and 32mm dia chromium plated waste fittings with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. ( make parryware / hindware / jaquar ) 59 s & f pvc connections 15mm size with ptmt nuts of length 600mm complete. 60 s & f in repair 6mm thick looking mirror of 1st quality glass, mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete. ( saint gobain / modifloat ) 61 s & f in repair 15 mm dia bore fancy type chromium plated bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed. 62 s & f in repair 15 mm dia bore fancy type chromium plated two way bib taps, cast copper alloy with crutch or butterfly handle screwed down, high pressure, screwed both ends for iron pipe or for unions. 63 s & f in repair 15 mm dia bore fancy type chromium plated stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed. 64 supply & fix in repair brass chromium plated pillar tap swan neck long body fancy typefor wash hand basin for mixing hot and cold water screwed down for iron pipes suitable for 15mm bore pipe complete. 65 s & f in repair brass / chromium plated tubular towel rail, 20mm dia, d type, 60cm long between flanges complete. 66 s & f in repair soap dish, any type, fixed to plugs with chromium plated brass screws complete. 67 s & f in repair 125mm dia stainless steel grating ( double q ) fixed on floor trap / nahani trap in cement mortar 1:6, all as specified and directed. 68 supply & fix in repair brass chromium plated wall mixer ( 2 / 3 hole ) with provision for connection to shower rose for mixing hot and cold water screwed down for iron pipes suitable for 15mm bore pipe complete all as specified and directed. ( make parryware / prayag / hindware ) 69 s & f in repair chromium plated shower rose 15 mm size, 125mm long with 300 mm arms including fixing to pipe or union complete. ( make : jaguar / parryware / hindware ) 70 s & f in repair harrison rails ofbore 20 25mm , mild steel, chromium plated cut to length as required and fixing with brackets, stops, rollers, finiales etc complete all as specified and directed. 71 m & l for 2 mm thick of birlawhite putty / jk white wall care putty in two coats on new / old plastered surfaces and making the surface uniform & smooth on walls / ceilings. 72 m & l for preparing new plastered wall surfaces and distempering two coats on walls with distemper oil emulsion, white or tinted over a coat of chalk whiting complete all as specified and directed. 73 m & l for preparing new plastered ceiling surfaces and distempering two coats on ceilings with distemper oil emulsion, white or tinted over a coat of chalk whiting complete all as specified and directed. 74 m & l for preparation of old plasteredsurfaces and applying one coat of acrylic distemper on walls complete all as specified and as directed. 75 m & l for preparation of old plasteredsurfaces and applying one coat of acrylic distemper in ceilings complete all as specified and as directed. 76 m & l for one coat of exterior emulsion paint white or tinted on walls of fascia of roof or chajjas on old decorated prepared plastered / painted surfaces of bldg all as specified and directed. make : asian paints ( brand ace ) / berger paint ( brand walmasta ) / nerolac paint ( suraksha plus ) . 77 m & l for two coats of exterior emulsion paint white or tinted over a coat of primer on walls of fascia of roof or chajjas on new prepared plastered surfaces of bldg all as specified and directed. make : asian paints ( brand ace ) / berger paint ( brand walmasta ) / nerolac paint ( suraksha plus ) . 78 m & l for one coat of exterior weather proof emulsion paint tinted on walls of fascia of roof or chajjas on old painted surfaces brick, stone, concrete, asbestos cement or plaster on old decorated prepared plastered / painted surfaces of bldg all as specified and directed. make : asian paints ( apex ) / berger paint ( brand weathercoat smooth ) / nerolac paint ( nerolac ) . 79 m & l two coat of syntetic enamel paint overnewsteel surface of any description over 10cm in width or grithnot otherwise describedover one coat red oxide primerincl preparation of surfaces complete. 80 s&f 4mm thick sheet glass, ordinary quality and glazing with oil putty in a square n exc 0.5 sq m in each pane. 81 s & f of 4.00 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete. 82 s & fstainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40mm and fixed with beeding / staples complete all as specified and directed. 83 m&l for providing water proofing treatment over cleaned roof surface with super thermo app modified polymeric membrane comprising of followings : ( i ) . complete removal of existing roof treatment by picking, sweeping clean and washing down with water to remove dust etc from plastered / roof surface / walls and filling the crackes with sealing compound grade a . ( ii ) rendering / screed bed 15 mm thick in cement mortor ( 1:4 ) mixed with liquid water proofing compound as per manufacturers instructions andfinished the surface fair and even. ( iii ) applying evenly a coat of bitumen based primer conforming to is 3384 1965 @ 0.30 kg / sqm. ( iv ) applying 3 mm thick app modified polymeric membrane with non polyster reinforcement of approved make, weight not less than 3.50 kg / sqm laid with gas torch and fastedon roof surface with roller. the over laps 100mm and shall be sealed by torch application as per manufacture instructions including vertical surfaces after cutting necessary grooving and making good with pcc 1:2:4 type b o with sika latex power as per manufacture instructions. ( v ) applying two coats of bituminous anticorrosive multi purposealuminium coating ( super silver shield ) @ 150 gm / sqm per coat over polymeric membrene. note : wpc shall be measured and paid separately. 84 m&l for conventional rcc septic tank designed to carry sewage and sullage water, excavation in any type of soil, pcc 1:4:8 below foundation, rcc m 30 design mix in walls, base slab, baffle walls and roof slab including beams etc with vent shaft, manhole openings with cover connection etc., complete with effective depth of 1.5 meter and overall depth of 3 meter for 50 users. 85 soakage wells exc, in ordinary soil, foundation in pcc 1:3:6 wells of honey combed and solid in m 25 concrete , incl interlocking chamber, screen chamber brick work in cm, rcc cover slab in m 25 / rr masonary / filling with brick bats, complete of size 2.4 dia x 3.00 m deep. 86 taking down copper / aluminium point wiring ( light, fan, bell, socketor power ) complete including fixture and fittings such as switches, ceiling roses, pendent, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit ( credit a for above items should be made as per condition seperately ) and making good distrubed surfaces ofwalls, floors etc complete all as specified and directed at site. 87 taking down old / unserviceable distribution board by disconnection of electric connection carefully spn dbs / tpn dbs / main switch including old unserviceable mccbs / mcbs, isolators, etc and making good to disturbed surface complete all as specified and directed. 88 taking down carefully copper / aluminium sub main wiring of any size fromsurface / concealed / existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed. 89 taking down ceiling fan / exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan bladesand deposit to mes store yard of age e / m complete all as specified and as directed. 90 m&l for point wiring with 1.5 sq mm single core pvc insulated unsheathed copper frls multi stranded conductor cable in andincluding concealed pvc conduit of size 20 / 25mm isi marked inclusive oftees, bend, elbows etc upto and including sunk in anodized pressed steel box for housing switch socket etc withwhite laminated 3 mm thick hylam sheet cover isi marked of suitable size complete including pvc insulated multi strandedcopper conductor 1.5 sq mm frls cable as earth wire to common earth dolly for connection to ceiling rose to earth terminalincludingcutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed by engr in charge for following : 91 ( a ) one light point controlled by one, one way switch 5 amps 92 ( b ) one fan point / exhaust fan point controlled by one, one way switch 5 amps and regulator 93 ( c ) one 3 point 5 amps switch socket outlet point controlled by one switch on the same board. 94 ( d ) one 3 pin 5 amps switch socket outlet point controlled by one switch on independent board. 95 description all as per item no 90 here in before butusing 2.5 sq mm single core copper conductor cable of multistranded flame retardant pvc insulated unsheathed 1100 volts grade for 5 / 15 amps switch socket cobmination point including necessary running of2.5 sq mm copper conductor flame retardant pvc wire as earth continuity conductor along with wiring and connecting to the common eath dolly. 96 s & f switch piano type single pole 5 amp, 230 volts complete all as specified and directed. 97 s & f switch piano type single pole 15 amp, 230 volts complete all as specified and directed. 98 s & f socket outlet 2 in 1, 5 pin, 5 amp, 230 volts complete all as specified and directed. 99 s & f socket outlet 2 in 1, 5 pin, 5 / 15 amp, 230 volts complete all as specified and directed. 100 s & f ceiling rose, surface bakelite with 3 terminals, isimarked for batten fitting complete. 101 s & f stepped type electronic fan regulator flushtype complete all as specified and directed. 102 s & f lamp holder, pvc / polycarbonate type with back plate suitabl for batten / slanting fittings complete all as specified and directed. 103 m & l for sub main wiring with approved colour coding as per is with two single core pvc insulated frls cable with stranded copper conductor of size 6 sq mm nominal area and drawing into suitable size of pvc non metallic rigid heavy duty pvc conduit of white / ivory colour and its accessaries isi marked heavy duty of suitable sizeincluding concealed in wall etcone run of pvc insulated with 6.0 sqmm ( nominal area ) stranded copper conductor frls cable as earth wire complete all as specified and as directed. note: two runs of 6 sqmm cable, one run of 6 sqmm cable and one run of pvc conduit will be measured as one unit 104 s & f for sheet metal enclosure mcb db tpn 4 way vertical type with 200 amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the dbs in wall by cutting the brick / stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. 105 s & f for sheet metal enclosure mcb db spn 8 way with 200 amps rated bus bar 240 volts double door with magnetic locking system including necessary provision for inserting the dbs in wall by cutting the brick / stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. 106 s & f formcb tripple pole and neutral rated capacity 63 amps, 415 volts breaking capacity 10 ka, c curve complete all as specified and as directed. 107 s & f for mcb single pole and neutral rated capacity 32 amps, 240 volts breaking capacity 10 ka, c curve complete all as specified and as directed. 108 s & ffor mcb single pole rated capacity 5 to 32 amps, 240 volts breaking capacity 10 ka, c curve complete all as specified and as directed. 109 s & f for ceiling fan, 230 volts, 1200 mm sweep with service value of the fan shall be greater than 6.1 as per bis with necessary accessories and electrical connections from ceiling rose to fan teriminal complete all as specified and as directed. 110 s & f for highly efficient led bulbs, 10 w, used as a ready replacement for existing gls / cfl direct fit lamp, in b 22 cap of make bajaj, havells, hpl complete all as specified and directed 111 s & f forled 10 watts batten aluminium extruded with decorative end caps complete all as specified and as directed. make bajaj cat part no bclsb 10 nw or its equivallent model in wipro, philips. 112 s & f for wall mounted led tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouputboxtype fitting, 230 volts and intregrated electronic driverconnector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired andnecessary mounting arrangements, provision of new 3 core multistrandedcopper conductor of size 23 / 0.193 from ceiling rose to fitting complete all as specified and as directed. 113 s & f building security lightfitting 1 x 35 / 36 w led new generation energy saving & environmental friendly long life led street / bldg security light made up of pressure die cast aluminium housing with mid power led as lighting source and pc cover having top opening including driver compartment driver with ip66 protection and impact resistance of ik07 including with suitable for 32mm dia medium grade g i bracket not exc 1.5 mtr length made to shape & fixing on pole / wall with 2 nos of ms clamp including necessary connection from lt oh line / buildings 114 s & f for energy efficient exhaust fan of 230 mm sweep made of metal body ventil air ds type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of pvc flexible copper cable of size 23 / 0.0076 two core from ceiling rose to exhaust fan forconnection and making suitable size ofhole to existing brick wall for fan basecompelte all as specifiedand directed. ( note : cost of suitable opening wall for fixing exhaust fan is deemed to be includedin overall rate quoted ) . 115 taking down existing old extg unserviceable lt ug / service cable of any description and sizecomplete all as specified and directed. 116 supply & laying in trenches / laid in floor / duct / drawn through conduitxlpe insulated, armoured, heavy duty elecric cable with alluminium conductor, 1100 volt grade cross sectional area 25 sqmm 4 core. 117 excavation in trenches not exceeding 1.5 mtrs wide & not exceeding 1.5 mtr in depth in soft or loose soil & getting out complete all as per & directed. 118 returning filling including spreading levelling watering & well ramming in layers not exc 25 cm 119 removal of excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as directed. 120 m & l for laying of hdpe double wall corrugated pipes in trench for ug cable protection conforming to is 14930 part ii with ip 67 having outer dia 50 mm and inner dia of 38 mm including necessary fittings such as couplers, bends etc complete all as specified and directed. make: rex / rudrax polymers / finolex 121 m & l for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically ( earth pit not less than 2.25m deep below ground level ) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to gi earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, pcc chamber, ci frame and cover, ms funnel with wire mesh all as shown in electrical plate no 3 of ssr part i including excavation and earthwork in any type ofsoil / strata and testing on completion. note: gi earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted....

Due Date : November 07, 2023

Tender Value : ₹ Ref. Documents

View Tender
35
Eastern Railways - Bihar

39230461 supply of alloy hex lock nut, 25mm dia al. alloy coupler to is:1285 ( latest ) with desgn. 63400 condition t6 ( new ) of table 2 threads as per table 1 of is 14763 ( latest ) , with is 14768 part 1 clause 6.3.3 ( medium mechanical stresses ) , clause 6 table 1 s.no. ( vi ) for temperature classification, clause 6.8.1.4 ( protection against dust ) and clause 6.9.3 ( with declared tensile strength for 10 kg load ) and dimensions to is:14768 part 2 ( latest ) . the length of the coupler shall be as per is:14768 part 2 latest fig.102 marked x that is 25 mm long. [ warranty period: 30 months after the date of delivery ] , 40mm dia al. alloy coupler is:1285 ( latest ) with desgn. 63400 condition t6 ( new ) as per drg.no. of table 2, with threads asper table 1 of is:1476 firms offer : as per indian standard is 14768 length of the coupler will be 35 mm. [ warranty period: 30 months after the date of delivery ] , 40mm dia al. alloy hex lock nut to is:1285 ( latest ) with desgn. 63400 condition t6 ( new ) of table 2, with thread as per table 1 of is 14763 ( latest ) , with is 14768 part 1 clause 6.3.3 ( medium mechanical stress ) , clause 6 table 1 s.no. ( vi ) for tempreture classification, clause 6.8.1.4 ( protection against dust ) and clause 6.9.3 ( with declared tensile strength for 10 kg load ) and dimension to tab.6 of is:3837 ( latest ) [ warranty period: 30 months after the date of delivery ] , aluminium alloy conduit ( 25mm dia, wall thickness 2.0 mm ) of threadable quality to designation 63400 of table 1 and condition t6 ( new ) or wp ( old ) of table 2 of is:1285 ( latest suitable for electrical wiring, dimension and marking shall conform to clause 7.6 of is:9537 latest part ii. the supply of conduit shall be in standard length of 4 meters. [ warranty period: 30 months after the date of delivery ] , 25mm dia aluminium alloy hex lock nut to is:1285 ( latest ) with designation 63400 condition t6 ( new ) of table 2, with threads as per table 1 of is 14763 ( latest ) , with is 14768 part 1 clause 6.3.3 ( medium mechnical stresses ) , clause 6 table 1 s.no. ( vi ) for temperature classification, clause 6.8.1.4 ( protection against dust ) and clause 6.9.3 ( with declared tensile strength for 10kg load ) and dimensions to tab.6 of is:3837 ( latest ) . [ warranty period: 30 months after the date of delivery ] , internally screwed bush aluminium dia 40mm to drg icf / sk 7 2 230 item 12 altc. [ warranty period: 30 months after the date of delivery ] , internally screwed bush, 25mm, as per drawing: icf / sk 7 2 230 alt.c item 10 [ warranty period: 30 months after the date of delivery ] , : aluminum alloy conduit ( 40 mm dia, wall thickness 2.0 mm ) of threadable quality to designation 63400 of table 1 and condition t6 ( new ) or wp ( old ) of table 2 of is:1285 ( latest ) suitable for electrical wiring, dimensions and marking shallconform to clause 7.6 of is:9537 latest part ii. the supply of conduit shall be in standard length of 4 meters. [ warranty period: 30 months after the date of delivery ] ...

Due Date : September 11, 2023

Tender Value : ₹ Ref. Documents

View Tender
36
Northeast Frontier Railway - Bihar

38843048 supply of gravity cock. drg. no.: icf drawing no: icf / sk 6 3 369, alt h / 2 item 1, as per spec.: material specification : aluminium alloy. [ warranty period: 30 months after the date of delivery ] dbrt workshop depot , nfr assam 18000.00 numbers...

Due Date : August 21, 2023

Tender Value : ₹ Ref. Documents

View Tender
37
Department of Higher Education - Bihar

38727620 bids are invited for wrought aluminium and aluminium alloys extruded tube and hollow sections for general engineering purposes (q3) total quantity : 500...

Due Date : September 29, 2023

Tender Value : ₹ Ref. Documents

View Tender
38
Eastern Railways - Bihar

38358497 supply of alloy hex lock nut, 25mm dia al. alloy coupler to is:1285 ( latest ) with desgn. 63400 condition t6 ( new ) of table 2 threads as per table 1 of is 14763 ( latest ) , with is 14768 part 1 clause 6.3.3 ( medium mechanical stresses ) , clause 6 table 1 s.no. ( vi ) for temperature classification, clause 6.8.1.4 ( protection against dust ) and clause 6.9.3 ( with declared tensile strength for 10 kg load ) and dimensions to is:14768 part 2 ( latest ) . the length of the coupler shall be as per is:14768 part 2 latest fig.102 marked x that is 25 mm long. [ warranty period: 30 months after the date of delivery ] , 40mm dia al. alloy coupler is:1285 ( latest ) with desgn. 63400 condition t6 ( new ) as per drg.no. of table 2, with threads asper table 1 of is:1476 firms offer : as per indian standard is 14768 length of the coupler will be 35 mm. [ warranty period: 30 months after the date of delivery ] , 40mm dia al. alloy hex lock nut to is:1285 ( latest ) with desgn. 63400 condition t6 ( new ) of table 2, with thread as per table 1 of is 14763 ( latest ) , with is 14768 part 1 clause 6.3.3 ( medium mechanical stress ) , clause 6 table 1 s.no. ( vi ) for tempreture classification, clause 6.8.1.4 ( protection against dust ) and clause 6.9.3 ( with declared tensile strength for 10 kg load ) and dimension to tab.6 of is:3837 ( latest ) [ warranty period: 30 months after the date of delivery ] , aluminium alloy conduit ( 25mm dia, wall thickness 2.0 mm ) of threadable quality to designation 63400 of table 1 and condition t6 ( new ) or wp ( old ) of table 2 of is:1285 ( latest suitable for electrical wiring, dimension and marking shall conform to clause 7.6 of is:9537 latest part ii. the supply of conduit shall be in standard length of 4 meters. [ warranty period: 30 months after the date of delivery ] , 25mm dia aluminium alloy hex lock nut to is:1285 ( latest ) with designation 63400 condition t6 ( new ) of table 2, with threads as per table 1 of is 14763 ( latest ) , with is 14768 part 1 clause 6.3.3 ( medium mechnical stresses ) , clause 6 table 1 s.no. ( vi ) for temperature classification, clause 6.8.1.4 ( protection against dust ) and clause 6.9.3 ( with declared tensile strength for 10kg load ) and dimensions to tab.6 of is:3837 ( latest ) . [ warranty period: 30 months after the date of delivery ] , internally screwed bush aluminium dia 40mm to drg icf / sk 7 2 230 item 12 altc. [ warranty period: 30 months after the date of delivery ] , internally screwed bush, 25mm, as per drawing: icf / sk 7 2 230 alt.c item 10 [ warranty period: 30 months after the date of delivery ] , : aluminum alloy conduit ( 40 mm dia, wall thickness 2.0 mm ) of threadable quality to designation 63400 of table 1 and condition t6 ( new ) or wp ( old ) of table 2 of is:1285 ( latest ) suitable for electrical wiring, dimensions and marking shallconform to clause 7.6 of is:9537 latest part ii. the supply of conduit shall be in standard length of 4 meters. [ warranty period: 30 months after the date of delivery ] ...

Due Date : July 21, 2023

Tender Value : ₹ Ref. Documents

View Tender
39
Department of Higher Education - Bihar

38315020 bids are invited for wrought aluminium and aluminium alloys extruded tube and hollow sections for general engineering purposes (q3) total quantity : 500...

Due Date : July 07, 2023

Tender Value : ₹ Ref. Documents

View Tender
40
Department of Higher Education - Bihar

38314796 bids are invited for wrought aluminium and aluminium alloys extruded tube and hollow sections for general engineering purposes (q3) total quantity : 500...

Due Date : July 07, 2023

Tender Value : ₹ Ref. Documents

View Tender
41
Patna Dairy - Bihar

38240540 purchasing of the following items. aluminum alloy milk can with lid capacity 40 ltrs isi marked with punching on neck & lid...

Due Date : June 26, 2023

Tender Value : ₹ Ref. Documents

View Tender
42
East Central Railway - Bihar

37863875 auction sale of scrap ferrous and non ferrous ( 1 ) released c / l assembly ( st, bt, rt, tube etc ) , release no. plate without nut bolt, release misc. iron, release fencing net off size, fe 12884.2kg ( 2 ) release contact wire, cu 8901.81kg ( 3 ) release catenary wire, cu 3795.56kg ( 4 ) released copper scrap misc ( dropper, jumper, isolator part etc. ) , cu 1156.3kg ( 5 ) cut piece 18mm copper bus bar rod, cu 238kg ( 6 ) released feeder wire, cu 919kg ( 7 ) release brass item & released terminal lug, brass 1041kg ( 8 ) release aluminium, released aluminium feeder wire and jumper, released bus bar connector, released upper & lower terminal connector ( alluminium alloy ) , al 301.5kg ( 1 8 ) location sse / trd / gaya...

Due Date : June 02, 2023

Tender Value : ₹ Ref. Documents

View Tender
43
East Central Railway - Bihar

37805672 supply of aluminium alloy cast arm rest right hand with fiber molded green colour top of lhb chair car of shatabdi coaches.spec: drg. no. judw / mech / 14 649. [ warranty period: 30 months after the date of delivery ] ...

Due Date : June 26, 2023

Tender Value : ₹ Ref. Documents

View Tender
44
Eastern Railways - Bihar

37737363 supply of alloy hex lock nut, 25mm dia al. alloy coupler to is:1285 ( latest ) with desgn. 63400 condition t6 ( new ) of table 2 threads as per table 1 of is 14763 ( latest ) , with is 14768 part 1 clause 6.3.3 ( medium mechanical stresses ) , clause 6 table 1 s.no. ( vi ) for temperature classification, clause 6.8.1.4 ( protection against dust ) and clause 6.9.3 ( with declared tensile strength for 10 kg load ) and dimensions to is:14768 part 2 ( latest ) . the length of the coupler shall be as per is:14768 part 2 latest fig.102 marked x that is 25 mm long. [ warranty period: 30 months after the date of delivery ] , 40mm dia al. alloy coupler is:1285 ( latest ) with desgn. 63400 condition t6 ( new ) as per drg.no. of table 2, with threads asper table 1 of is:1476 firms offer : as per indian standard is 14768 length of the coupler will be 35 mm. [ warranty period: 30 months after the date of delivery ] , 40mm dia al. alloy hex lock nut to is:1285 ( latest ) with desgn. 63400 condition t6 ( new ) of table 2, with thread as per table 1 of is 14763 ( latest ) , with is 14768 part 1 clause 6.3.3 ( medium mechanical stress ) , clause 6 table 1 s.no. ( vi ) for tempreture classification, clause 6.8.1.4 ( protection against dust ) and clause 6.9.3 ( with declared tensile strength for 10 kg load ) and dimension to tab.6 of is:3837 ( latest ) [ warranty period: 30 months after the date of delivery ] , aluminium alloy conduit ( 25mm dia, wall thickness 2.0 mm ) of threadable quality to designation 63400 of table 1 and condition t6 ( new ) or wp ( old ) of table 2 of is:1285 ( latest suitable for electrical wiring, dimension and marking shall conform to clause 7.6 of is:9537 latest part ii. the supply of conduit shall be in standard length of 4 meters. [ warranty period: 30 months after the date of delivery ] , 25mm dia aluminium alloy hex lock nut to is:1285 ( latest ) with designation 63400 condition t6 ( new ) of table 2, with threads as per table 1 of is 14763 ( latest ) , with is 14768 part 1 clause 6.3.3 ( medium mechnical stresses ) , clause 6 table 1 s.no. ( vi ) for temperature classification, clause 6.8.1.4 ( protection against dust ) and clause 6.9.3 ( with declared tensile strength for 10kg load ) and dimensions to tab.6 of is:3837 ( latest ) . [ warranty period: 30 months after the date of delivery ] , internally screwed bush aluminium dia 40mm to drg icf / sk 7 2 230 item 12 altc. [ warranty period: 30 months after the date of delivery ] , internally screwed bush, 25mm, as per drawing: icf / sk 7 2 230 alt.c item 10 [ warranty period: 30 months after the date of delivery ] , : aluminum alloy conduit ( 40 mm dia, wall thickness 2.0 mm ) of threadable quality to designation 63400 of table 1 and condition t6 ( new ) or wp ( old ) of table 2 of is:1285 ( latest ) suitable for electrical wiring, dimensions and marking shallconform to clause 7.6 of is:9537 latest part ii. the supply of conduit shall be in standard length of 4 meters. [ warranty period: 30 months after the date of delivery ] ...

Due Date : June 12, 2023

Tender Value : ₹ Ref. Documents

View Tender
45
Military Engineer Services - Bihar

37044332 tender for special repair to omqs / smqs at af station bihta 1 excavation in trenches in soft/loose soil not exceeding 1.5 mtr wide and not exceeding 1.5 m deep and getting out including forming bottom surface for laying of pipes complete all as specified and directed. 2 returning filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 mm thick complete all as specified and directed. 3 removal of excavated material to a distance not exc 50 meter and depositing wheredirected at a level not exceeding 1.5 m above the starting point complete all as specified and directed. 4 supplying, laying and cushioning for cable protection in trenches 8 cm deep before laying cable and 15 cm deep over the cable including well punning complete all as specified and dierected 5 m&l cement concrete 1:5:10 type e2, using 40 mm graded stone coarse aggregate in sunken floor, all as specified and directed 6 m&lreinforced cement concrete (1:2:4) type b 1, (20 mm graded aggregate) as in slab supported on walls, beam, column and in similar work, complete all as specified and directed. 7 s & f for factory made solid pvc door frame of size 50mm x 47mm made out of 5mm plain colour pvc sheet, reinforced with ms square tube fixed in opening complete as per manufacturers specifications and as directed. 8 s & f for 30 mm thick factory made solid panel pvc door shutter conferming to criteria of testing as per is : 4020, consisting of frame made out of ms tube of 19 guage thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails ms frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded pvc `c channel of size 30x50mm forming styles and 5mm thick 75mm wide pvc sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross pvc sheet as gap insert for top rail and bottom rail panelling of 5 mm thick pvc sheet to be fitted in the ms frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick pvc sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick pvc strip of 20 mm width is to be struck on the interior side of c channel using pvc solvent adhesive complete as per manufacturers specifications & drawings & all as directed. 9 s & f pressed steel frames of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs hinges lock strike plate etc complete as specified. 10 s & f pressed steel frames of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete as specified. 11 m & l for pcc 1:3:6 type c 0 using 12.5mm aggregate crushed stone aggregate as in filling back side of pressed steel door/window frames, all as specified & directed. 12 s&f glazed/wire gauged/skeleton shutter 35 mm thick out of (well kilnseasoned)2nd class hard wood (hollock) the size of rails and style as per is chemically pressure treated in factory gainst termite infestation prepared to receive wire gauge (without sash bars) edges of frame chamfered or rounded fitted with cut and mitered beads, all as specified & directed.(note : wire gauge/glazing to be measured and paid separately). 13 s&f factory made 40 mm thick plain, framed, panelled shutter (two panel) with lock rail using 2nd class hw (hollock) kiln seasoned andchemicallypressure treated the size of rail and style as per is 1003 (part i) and panel insert of 9mm thick bwp commercial facing plywood or 12mm veneered particle boards with commercial ply all as specified 14 s&f plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed in 2nd class hardwood. 15 s&f of 25 mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both sides all as specified and as directed. 16 s&f in repairs of 12 mm thick plywood, grade bwr, type bb, fixed with screws to timber frame work etc. in built in cupboard complete all as specified and as directed. 17 s&f for 100mm long mild steel butt hinges, heavy weight cold rolled mild steel, all as specified and as directed. 18 s&f for 75mm long mild steel butt hinges, heavy weight cold rolled mild steel, all as specified and as directed. 19 s&f 150 mm long aluminium anodised handles, cast type, all as specified and as directed. 20 s&f for 150 mm long aluminium, anodised, barrel tower bolts of extruded section, all as specified and as directed. 21 s&f 300 mm long aluminium alloy, anodised, sliding dooor bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, all as specified and as directed. 22 s&f for 200 mm long aluminium, anodised, barrel tower bolts of extruded section, all as specified and as directed. 23 s&f mild steel 300 mm ordinary rat tail rod pattern springs including roller & rooler plate complete all as specified and as directed. 24 s&f floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor overall length of cover plate 140mm, all as specified and as directed. 25 s&f hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws of 100 mm size, all as specified and as directed. 26 s&f in repairs of harrison rail mild steel chromium plated of 19/20mm dia for curtain rod fixed with two nos of brackets for each rail all as specified and as directed. 27 s&f mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm, all as specified and as directed. 28 s&f anodised aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified & directed. (note : minimum thickness of powder coating 50 micron). 29 s&f anodised aluminium powder coated window and ventilator shutters, hung type without sash bar, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. anodised aluminium fittings such as peg stays 150 mm long (01 no), hinges b 21 100 mm long (02 no), suitable handle (01 no) complete all as specified.(note : minimum thickness of powder coating 50 micron). 30 s&f sheet glass 4 mm thick ordinary quality & glazing with rubber gasket in square n.exc 0.5 sqm in each pane, all as specified and directed.. 31 s&f 3 mm thick figured glass, pinhead type in squares n.exc 0.50 sqm each pane, all as specified and directed. 32 m&lfor mild steel tmt bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete, all specified and directed. 33 s&f in repair 18mm thick celuka pvc sheet minimum 600 kg/cum density grade 1 quality of both side plain white colour rigidlam glossy finish fixed with screws, solvent cement/adhesive as per manufacturer instructions to make kitchen cabinet sides top and bottom and shelves inside the cabinet completeas per specifications and as directed. note: (i) cup board accessories ie fittings,handles,hinges, will be measured and paid under this schedule.(ii) quoted rates deem to be include fixing of cabinet on wall with appropriate rawl plug/ dash through fastener (hammer type).(iii) fabrication and installation of cabinet to be carried out by authorised vendor of manufacturer only. 34 s&f auto closing stainless steel (grade 304) hinges 35 mm of 0 crank (kh 001) or 8 crank (kh 002) openable at 110 degree for kitchen cabinet shutters all as specified & directed. 35 s&f stainless steel handles of 100 mm size for kitchen cabinet shutter complete all as specified. 36 m&l for app basedpolymeric water proofing membrane minimum weight 3 kg/ sqm and minimum 3mm thick reinforced with polyster non wove fabrick (weight not less than 150gms/sqm), laid with torched application with the strict supervision of manufacturers technical supervisor, laid over hot blown bitumen 85/25 grade @1.2 kg per sqm over bitumen primer @0.30 ltr/sqm including cleaning surface, complete all as specified and directed.(note membrane shall be laid with 100mm side/end lap on prepared surface as per manufacturer instruction work shall be carried out strictly with the technical tradesmen and supervision of technical staff of manufacturer) 37 m&l for 40 mm thick brick tiles laid on bedding of 15 mm thick cement mortar (1:6) and joints grouted flush in cement mortar (1:3) on treated roof all as specified and as directed 38 m&l for applying bituminous primer @ 0.40 kg/sqm and applying one coat of hot blown bitumen of grade 85/25 @ 1.20 kg/sqm as in sunken complete all as specified including fixing of 40 mm dia gi spout pipe at bottom of slab/plastered surface etc, all as specified & directed. 39 roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc, all as specified & directed. 40 m&l for providing cement concrete type b 1, 1:2:4 (20 mm graded aggregate) as in roof padding, roof kerbs (rounded or chamfered on edge) etc all as specified & directed. 41 m&l 75 mm thick cement concrete type d 2, 1:4:8 (using 40 mm graded aggregate) as in subbase to floor, ll as specified and directed.. 42 m&l for 25 mm thick cement concrete type b 0, 1:2:4 (12.5 mm graded aggregate) as on floor, ll as specified and directed.. 43 m & lnon skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tiles including 15 mm thick screed bed in cement mortar 1:6 all as specified and directed. 44 m & lnon skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tiles including 15 mm thick screed bed 1:6 all as specified and directed. 45 m & l glazed ceramic coloured tiles of approved quality isi marked (450 x 300 x 7 mm / 350 x 250 x 7 mmthick) as in vertical surfaces such as skirting dados etc set jointed in neat cement slurry and pointed in coloured cement to match with the tiles including 1:4 cement plaster 10 mm thick on brick work and concrete surface, all as specified and directed. 46 m&l for 15 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms (including a hole of gas pipe) and like including 15 mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, all as specified and directed. 47 rounding to edges of stone slabs one edge, such as in steps, cooking platform, and similar situations, all as specified and directed.. 48 m&l for rendering 10 mm thick in cement mortor 1:4 on fair faces of brick work, surfaces finished even and fair without using extra cementwith water proofing compound, all as specified and directed. (note : wpc shall be measured and paid seperatelly). 49 m&l for 10 mm thick rendering in cement mortor (1:6) on air faces of brick work, surfaces finished even and smooth without using extra cement cement, all as specified and directed 50 m & l for 15 mm thick rendering in cm (1:4) on vertical surfaces of brick walls finished even and smooth without using extra cement with using water proofing compound, all as specified & directed. (note wpc will be measured and paid separately). 51 m&l for 5 mm thick rendering in cm (1:3) on ceiling surfacesoffinished even and fair without using extra cement, all as specified & directed.. 52 supply only integral water proofing compound 53 s&f 15 mm gi tubes medium grade with all fitting and fixed complete to walls, ceilings or laid infloors including taking up or down old steel tube complete all as specified and directed. 54 s&f 20 mm gi tubes medium grade with all fitting and fixed complete to walls, ceilings or laid infloors including taking up or down old steel tube complete all as specified and directed. 55 m&l for preparation of new wood basesurfaces of any description, over 10 cm in width or girth, not otherwise described and appling twocoats of synthetic enamel paint (ordinary tint) overone coats of pink primer, all as specified and directed. 56 m&l peparation of old painted wooden surfaes of any dscription over 10cm width or girth and applying one coatof synthetic enamel paint complete all as specified and as directed. 57 m&l peparation of old painted steel surfaces of any description over 10cmwidth or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. 58 m&l for preparation of new plastered surfaces of ceiling and applying three coats of white wash all as specified and directed. 59 m&l for preparation of old surfaces of ceiling and applying two coats of white washall as specified and directed. 60 m&l for preparation of new plastered surfaces of wall and applying three coats of white wash all as specified and directed. 61 m&l for preparation of old decorated plasteredsurfaces of wall and applying two coat of white wash all as specified and directed. 62 m&l for preparation of new plastered surfaces of wall and applying two coats oil bound distemper over a coat of alkali resistant primer over a coat of 1 mm thick wall care putty in two different layers complete all as specified & as directed.(note treatment slall be carried our by spraying with mechanical means) 63 m&l for complete removal of existing treatment of wall and applying two coats oil bound distemper over a coat of alkali resistant primer over a coat of 1 mm thick wall care putty in two different layers complete all as specified & as directed.(note treatment slall be carried our by spraying with mechanical means) 64 m&l for complete removing of existing treatment of wall surfaces by scrapping with mechanical sander (having mechanical vacuum mechanism)to make surface clean, free from dust, loose paint etc and applying two coat of cement base paint of different colours complete all as specified and directed. 65 m&l for preparation of new plastered surfaces of walls and applying two coat of cement base paint of any colours and pattern (two or more colours) complete all as specified and directed.(note : colour and pattern of paint will be directed by ge) 66 m&l for pvc (swr) pipe of 110 mm boresingle socketed in any length with rubber ring joint fixed to wall with suitable clamps of adequate numbers etc complete all as specified and directed. 67 s&fpvc swr bends 110 mm boreall as specified and directed. 68 s&f cast iron soil, waste pipe100 mm dia, sand cast, in any length with or without ear, with cement joint, laid in trenches, complete all as specified. 69 s&f cast iron soil, wastepipe100 mm dia, sand cast, in any length with or without ear, with cement joint, laid in trenches, complete all as specified. 70 s&f cast iron soil, waste and vent pipe100 mm dia, sand cast, in any length with or without ear, with cement joint, fixed on wall, complete all as specified. 71 s&f cast iron soil, waste and vent pipe100 mm dia, sand cast, in any length with or without ear, with cement joint, fixed on wall, complete all as specified & directed. 72 s & f in repairs of 100 mm bore cast iron bends of any radius diminshing pieces or tappers (larger bore measured), all as specified & directed.. 73 s & f in repairs of 75 mm bore cast iron bends of any radius diminshing pieces or tappers (larger bore measured), all as specified & directed.. 74 s&f cast iron cowls of 100 mm bore pipe, all as specified & directed. 75 s & f in repairs cast iron floor trap with chromium plated graating of 100 mm size including jointing to waste pipe with cement joints etc, all as specified & directed. 76 s&f soap dish brass chromium plated decorative type, size 160x90mm complete all as specifed and directed. 77 s&f 600 mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick ac buildg board or commercial plywood and fixed to wooden plugs with cpbrass screws and cup washers complete all as specified and directed. 78 s&f in repairbrass chromium plated, tubular towel rails 20 mm dia, d type, 60cm long between flanges, completed all as specified and directed. 79 s&f in repair chromium plated 125 mm size shower rose with swivel joints, in square with cp long shank arm including fixing to steel pipe or union of 15 mm bore, complete all as specified and as directed. 80 s&f in repairs vitreous china squatting pan “orissa pattern” of size 580 x 440mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and lime concrete bedding complete all as specified in ssr and including s&f trap set complete all as specified and directed. 81 s&f in repairs pvc flushing cistern 10 ltr capacity valve less syphonic action type low level with and including dual flushball valve float & handle, waste pipe & brackets complete set complete all as specified and directed. 82 s & f in repairvitreous china wash basin, flat back, size 630x450mm white, excluding waste coupling, chain & plug, ci prackets, pvc waste pipe 32 mm,and porcelain stopper but including brackets. 83 s&f in repair chromium plated fancy type, stop cock/angular cock, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends of size 15mm bore. complete all as specified and directed. 84 s&f in repair chromium plated concealed type, stop valve, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends of size 15mm bore. complete all as specified and directed. 85 s & f in repair 15mm bore chromium plated bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron or brass ferrule, complete all as specified and directed. 86 s&f sheet glass assembly consisting of 5.5mm thick sheet glass shelf 12mm wide with chromium plated bracket guard and railing, 600mm long,complete all as specified and directed. 87 s & f in repair pillar taps fancy type(long body)cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, screwed for iron pipe, complete all as specified and directed. 88 s&f in repairpvc connections 15mm size with ptmt nuts of length 450 mm, complete all as specified and as directed. 89 s&frotational moulded polythene water storage tank of capacity 500 ltrs (cylindrical/vertical with closed top), triple layer construction, isi marked, hoisted & fixed in position including followings : (i)20 mm gi pipe medium grade,over flow 450mm long.(ii) 20 mm gi pipe medium grade waste pipe 600mm long.(iii) 20 mm brass ball valve/float valves, high pressure & high density plastic ball screwed for iron pipe and fixed.(iv) 20 mm gun metal globe/gate valve with iron wheel head, screwed on both ends for fixing including one gi nipple(20mm bore). 90 s&f in repair sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including pvcwaste pipe, cp waste coupling,bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified anddirected. 91 s&f 1mm thick stainless steel kitchen plate rack of size 750x 900mm best quality assembled with brass washer and nut and bolts including hooks (spoon/cup holders) complete all as specified & directed. 92 demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level), all as specified & directed..note : all demolished items/ debris to be removed out side of mod land. 93 demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, all as specified & directed..note : all demolished items/ debris to be removed out side of mod land. 94 demolition of reinforced cement concrete of any description & in any position, complete all as specified and directed. 95 dismantling of stone slabs and tiles of any description or thickness in floors aprons etc including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. 96 dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises,all as specified and directed. 97 taking down cement plaster on brick or stone walls, etc, incl raking out joints, hacking for key, scrubbing down with water, etc & prepare to receive new plaster complete all as specified and directed 98 taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each and removal from site all as specified and directed. 99 taking down chowkats or frame with shutter (without taking out shutter from the frame) exceeding 1.50 sqm and n exc 4.00 sqm each and removal from site all as specified and directed 100 taking down of shutters of any description exc 1.00 sqm but n. exc 2 sqm each, all as specified and directed 101 taiking up or down steel tubing and connections, 15 mm bore including cleaning, complete all as specified and directed. 102 taiking up or down steel tubing and connections, 20 mm bore including cleaning, complete all as specified and directed. 103 dismantling pvc water tankcapacity exceeding 250 but not exceeding 500 ltr, complete all as specified and directed. 104 taking down100/75 mm cast iron soil waste pipe (any size or patterns) moulding all fittings heads shoes, bends etc (measured over all as fixed along the confrece line over fittings and accessories), all as specified and directed. 105 taking down rain water pipes (any size or pattern) ,including all fittings all as specified and directted . 106 demolition of bricks (laid flat or on edge) or brick tiles in floors, channels, kerbs, aprons, etc (each layer) laid, bedded and pointed in any mortar including removal of debris/muds etc complete all as specified and as directed.note : all demolished items/ debris to be removed out side of mod land. 107 demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) and finally cleaning the surface with wire brush to remove old treatment to lay pcc padding, complete all as specified and directed..note : all demolished items/ debris to be removed out side of mod land 108 taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc, complete all as specified and directed. 109 taking down old unserviceable mcb db tpn4 way (vertical), double door, 415 v, ac, 50 hz, includingmcb63 amps 16 ka ,ip 40 protection conforming to is 13032 universal mounting with copper bus bar,neutral link, earth link, earthing studs, detachable gland plates with knockouts on both sides, complete all as specified & directed. 110 material and labour for concealed point wring for one light/fan/exhaust fan point controlled by 1 no,one way 5/6 amp switch ,using approved colour coding (phase red,neutral black,earth green) complete with frls pvc insulated and unshealthedstranded copper conductor cable 1.5 sqmm single coreconforming to is 694 including medium duty concealed unplasticised pvc conduit conforming to is 9537(part 3) and isi marked not less than 20 mm dia with concealed in wall pressed steel terminal box of not less than 2 mm thick of required size including painting terminal boxs inside and outside with two coat of synthetic enamle paint over one coat of red oxide primerwith top cover3 mm thickbakelight laminated sheetwith brass screws and cup washer with all assessories including frls pvc insulated and unshealthedstranded copper conductor cable 1.5 sqmm single core in green colouras earth wireconnected to earth dolly . complete all as specified and directed . 111 all as per item no 110 above butfor one 3 pin /5 pin socket outlet 5 amp controlled by 1 no one way 5/6 amp switch on same board along with other switches ,fan regulator etc. 112 all as per item no 110 above butfor one 3 pin /5 pin socket outlet 5 amp controlled by 1 no one way 5/6 amp switch on independent board. 113 all as per item no 110 above butfor one call bell/buzzer point controlled by one push button switch. 114 material and labour for point wring ,using approved colour coding (phase red,neutral black,earth green) complete for one socket outlet 15 amp on independent board with frls pvc insulated and unshealthedstranded copper conductor cable 2.5 sqmm single coreconforming to is 694 including medium duty concealed unplasticised pvc conduit conforming to is 9537(part 3) and isi marked not less than 20 mm dia with concealed in wall pressed steel terminal box of not less than 2 mm thick of required size including painting terminal boxs inside and outside with two coat of synthetic enamle paint over one coat of red oxide primerwith top cover3 mm thickbakelight laminated sheetwith brass screws and cup washer with all assessories including frls pvc insulated and unshealthedstranded copper conductor cable 2.5 sqmm single core in green colouras earth wireconnected to earth dolly complete all as specified and directed. 115 s&f switch piano flush button single pole one way 5/6 amp, 240 volts conforming to is 3854 isi marked all as specified and directed. 116 s&ffor socket outlet, 5 pin, 5/6 amp flush type conforming to is 1293 isi marked all as specified and directed. 117 s&f switch piano flush button single pole one way 15 amp, 240 volts conforming to is 3854 isi marked including taking down old one, all as specified and directed. 118 s&ffor socket outlet, 3 pin, 15 amp flush type conforming to is 1293 isi marked including taking down old one, all as specified and directed. 119 s&fceiling rose, surface bakelite,isolated bodythree terminals including taking down old one, all as specified and directed. 120 s&f lamp holder pvc/polycarbonate type with back plate suitable for batten fittings, all as specified and directed. 121 supply only led bulb of 09 watt complete all as specified and directed. 122 s&f forbell push flush type 5 a sp 240 v all as specified and directed. 123 s&fbell (ding dong) 230 volts, single pole all as specified and directed. 124 taking down ceiling fan including cable, dismantling blades and carry out mnr repair and fixing of damaged parts like capacitor, bushes, bearings and screws etc and keeping in safe custody of contractor up to re fixing in the same. all as specified & directed. 125 m&l for painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust, all as specified and directed. 126 hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan, all as specified and directed. 127 m & l for repair / rewinding of ceiling fand replacement of requisite spares like bush, bearing, down rod, capacitor, fan clamp, fan blade etc if necessary all as specified and directed. 128 m & l for repair / rewinding of exaust fand replacement of requisite spares like bush, bearing, capacitor, fan clamp, fan blade etc if necessary all as specified and directed. 129 supply and fixing led tube lights fitting 1x 18w, 220v, including led tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling roseand complete all as specified and directed. 130 supply and fixing led batten type tube light complete fitting 1x 10 w, 220v,connecting up with three core flexible copper conductor cable of suitable size from ceiling roseand complete all as specified and directed. 131 supply &fixing and connecting up complete mcb db tpn 4 way (vertical), double door, 415 v, ac, 50 hz, with and includingmcb63 amps 16 ka ,ip 40 protection conforming to is 13032 universal mounting with copper bus bar,neutral link, earth link, earthing studs, detachable gland plates with knockouts on both sides, complete all as specified & directed. 132 s&f sheet metal enclosures (mcb distribution board) when mcb’s to be used singlepole and neutral 8 ways 220 volt with 200 amps rated bus bar, double door with bus bar neutral link earth bar, din rail, necessary blanking plated, including fixing db flush in wall complete with making good disturbed surfaces and colour matching all as specified and directed including taking down old one, complete all as specified & directed. 133 s&f mcb’s single pole, 10 ka ,32 amp to 40 amp 240 volts,and of b series with required wiring connections and lugs etc and erecting in provided enclouser/destribution board.mcbs shall be of current limiting type ,isi marked conforming to is 8828 1996, including taking down old one, complete all as specified & directed. 134 s&f sheet metalenclosure with socket plug top and mcbs single pole with a two pin and earth plug andsocket complete with one single pole mcb ofc series of cap 20 amps including taking out the old one all as specified and directed. 135 s&f mcb’s dp, 10 ka, 32 amp to 40 amp 240 volts,and of b series with required wiring connections and lugs etc and erecting in provided enclouser/destribution board. mcbs shall be of current limiting type ,isi marked conforming to is 8828 1996,including taking down old one complete all as directed. 136 supply and fixing stud 10 w led lights energy saving bulk head luminaries including led light driver, holder connecting up with three core flexible copper conductor cable of suitable size from ceiling roseand complete all as specified and directed. 137 s&f sub main wiring using approved colour coding (phase red,neutral black,earth green) complete with two single core frls pvc insulated and unsheathedstranded copper conductor cable 6 sqmmas current carrying conductor and one run of 6.0 sqmm as neutral cable ,voltage rating 1100 volt ,isi marked drawn in and including concealed pvc conduit isi marked of dia not less than 25 mm and thickness 2 mm with stranded accessories along with one run of frls pvc green colour insulated,unshealthed,stranded copper conductor of size 6 sqmm all as specified and directedincluding taking down old one, complete all as specified and directed.(note: two run of single core frls pvc cable with one run of earth contunity conductor and conduit shall be measured as one unit.) 138 m&l for earthing complete with galvanized steel earth plate 600x600x6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvanised earth lead wire of 4mm dia as earthing lead by means of bolts, nuts, check nuts, and washers of galvanised iron or steel besides welding at all joints as shown in drawings and including excavation and earth work, gi pipe light grade 15 mm bore for protection of giwire from earth electrodeto test point /machinery / equipment.supplying and laying charcoal dustcomman saltpcc(1:2:4) type b1 using 20 mm gradedstone agregratechamber andrcc cover 54 cm x 54cm x50 mm thick (1:2:4) type b 1using 20 mm stone agrigrtae )reinforced with 8 mm dia tmt bars @75mm c/c both ways with mild steel handle 12 mm dia,using round bar ,pgi funnel with wire mesh, 20 mm dia gi pipe medium grade for watering all as shown in electrical plate no 3 of ssr part 1including testing and taking out the old one complete all as specified and directed(note cost of gi wire and gi protection pipe up to a distance 7.5 m shall be includedin quated rate of above items) 139 s&f 415 v, 10 ka ,b curve miniature circuit breaker mcb tpn 63 amps, 16 ka complete all as specified and directed. 140 supply, laying, connecting and testing xlpe cable underground pvc insulated and over all sheathed with aluminium conductor heavy duty 1100 volts grade 3.5 core 35 sqmm sizes, laid in trenches, floors, ducts passing through pipe forroad crossing etc including taking down old unsv cable of any size complete all as directed including taking out old damaged cable and all as specified and directed. (note excavation, earth work, brick protection sand cushioningand gi pipe etc shall be measured & paid for separately) 141 m&l for laying of bricks subclass ‘b’ old size having crushing strengh not s than 75 kg/sqcm, laid flat perpendicular to the direction of cable for protection of cable complete all as specified & directed. 142 m&l gi tubing 50 mm dia light grade, laid in trench/floor or fixed on wall with all fixingaccessories etc as specified and directed. ...

Due Date : May 08, 2023

Tender Value : ₹ 69 Lakhs

View Tender
46
East Central Railway - Bihar

36885735 supply of aluminium alloy cast arm rest right hand with fiber molded green colour top of lhb chair car of shatabdi coaches.spec: drg. no. judw / mech / 14 649 [ warranty period: 30 months after the date of delivery ] ...

Due Date : April 14, 2023

Tender Value : ₹ Ref. Documents

View Tender
47
Northeast Frontier Railway - Bihar

36697576 supply of table tennis table ( material of top plywood, material of frame aluminium ally, materials of legs aluminium alloy ) [ warranty period: 30 months after the date of delivery ] , supply of wood chess board [ warranty period: 30 months after the date of delivery ] , supply of lawn tennis racket [ warranty period: 30 months after the date of delivery ] => limited...

Due Date : March 16, 2023

Tender Value : ₹ Ref. Documents

View Tender
48
Northeast Frontier Railway - Bihar

36301124 supply of gravity cockgravity cock,gravity cock as per drg.no. icf drawing no: icf/ sk 6 3 369, alt f/2 item 1, specn: material specification : aluminium alloy. [ warranty period: 30 months after the date of delivery] => limited...

Due Date : February 23, 2023

Tender Value : ₹ Ref. Documents

View Tender
49
East Central Railway - Bihar

35609056 auction sale of i/lot no 40/sale/lot insp./2022 23/see/01 dtd 02.01.23, scrap shell/car body of underage condemned demu dpc coach no 02885 ( involved in fire accident) including with their components: power pack (kta50l) 01 nos, ventilation fan with hydraulic pump 01 nos, radiator fan housing 02 nos, cyclonic filter housing 02 nos, radiator hydraulic pump 02 nos & water expansion 01 nos. total weight 25.308 mtin which ferrous 25.087 mt & non ferrous (aluminium alloys) 0.221 mt.location: north side of stabling line no. 11 at demu shed/see. above coach to be sold with all fittings except those mentioned in excluded item column....

Due Date : January 12, 2023

Tender Value : ₹ Ref. Documents

View Tender