Ministry Of Home Affairs - Bihar
41602264 bids are invited for campus mse title1 , title2 , title3 , title4 , title5 , title6 frp sheet roofing with steel truss at ndrf bihta total quantity : 522...
41602264 bids are invited for campus mse title1 , title2 , title3 , title4 , title5 , title6 frp sheet roofing with steel truss at ndrf bihta total quantity : 522...
39412131 tender for annual repair of csd kallada for the year 2023 24; 1 the entire ship from lwl to main deck, deck plate, superstructure, bathroom, anchor, anchor rake, engine room, store rooms, hydraulic cooling pump room, spud, spud bracket, carriage, vent, cutter ladder, bollard, deck crane, railing, jet nozzle, railing chainand outside alongwith other fitment etc, are to be proper cleaned, scrapped, wire brushed, chipped and painted by 3 coats of existing colour marine paint. ( 1 coat zinc chromate primer, followed by two coat of existing colour of marine paints ) . all pipe lines should be colored as per marine color code. after it name of vessel, deptt. and logo to be made by fluorescent sticker as required as per direction of eic. 2 fabrication and installation of removable shed on deck over the engine room area including steel structure, frp sheet of good quality and other required material, labour charges all complete as required as per direction of eic. 3 labourand consumable charges 4 cost of material ( actual+10% ) 5 a good quality waterproof tarpaulin cover having size 3 m x 4.5 m to be supplied and fitted as required as per direction of eic. 6 all gauges / indicators / safety system in the engine room &control room / pannel board / wheel house are to be checked, serviced / renewed as required and calibrated as per direction of eic. 7 labourand consumable charges 8 cost of material ( actual+10% ) 9 truck tyre along with bull dog clamp and wire rope are to be supplied and fitted including labour and material as required as per direction of eic. 10 stbd side linear hydraulic motor was reported non operational, same to repaired / services as required as per direction of eic. 11 labour charges 12 cost of material ( actual+10% ) 13 entire manhole covers and rubber packing include all door and all air vent& all hatchs / tanks damaged rubber, nuts , bolts & studes same to be checked, repaired / renewed by good quality of rubber & ss fittngs as required as per direction of eic. 14 labour charges 15 cost of spares ( actual + 10% ) 16 stbd & port side railingto be straighten, faired and welded and securing with nuts and bolts including labour and material charges, same to be repair / renewable as per direction of eic 17 b check ofmain engine, ( make : catterpillar, model no.3406, ser no. 6tb3989, capacity: 325hp and ar no.7c 6843 ) , total running hours : 421 hrs, rpm digital gauge not working , exhaust temperature gauge not workingsame to be rectified / repaired / renewed ( if required ) , supply of gauge glass of expansion tank, v belt ( for dynamo drive : caterpillar 4n 8216 df, qty. 01 no. ; for gland pump drive : forech a1986 lp / a76, qty. 02 nos. ) asper direction of eic. 18 labour charges 19 cost of spares ( on actual + 10 % basis ) 20 both side anchor winch isnot working smoothly.same is to be serviced / renewed, along with renewal of pin, sleeve, bush as per direction of eic. 21 labour charges 22 cost of spares ( on actual + 10 % basis ) 23 replacement of worn out / damaged anchor wire of the swing pulleys ( dia 18 mm, length 120 m ) . the wire rope of ladder pulleys ( dia 22mm ) to be checked and if required to replaced with same length and steel grade wire rope as required as per direction of eic. 24 labour charges 25 cost of spares ( on actual + 10 % basis ) 26 fixed operator chair in the wheel house was reported damage, same to be repaired with good quality cushion and to be covered with seat cover of good quality as required as per direction of eic. 27 labourcharges 28 cost of spare / material actual + 10% basis 29 control room front glass lock was reported non functinal, same to be replaced with newer one as required as per direction of eic. 30 provision of spare for completing the repair work for boq sl. no. 01 to 11...
39132187 tender for annual repair of csd mahananda at nw1 for the f.y.2023 24 ; 1 the entire ship from lwl to main deck, deck plate, superstructure, bathroom, anchor, anchor rake, engine room, store rooms, hydraulic cooling pump room, spud, spud bracket, carriage, vent, cutter ladder, bollard, deck crane, railing, jet nozzle, railing chainand outside alongwith other fitment etc, are to be proper cleaned, scrapped, wire brushed, chipped and painted by 3 coats of existing colour marine paint. ( 1 coat zinc chromate primer, followed by two coat of existing colour of marine paints ) . all pipe lines should be colored as per marine color code. after it name of vessel, deptt. and logo to be made by fluorescent sticker as required as per direction of eic. 2 both side anchor winch swing pulley isnot working smoothly.same is to be serviced / renewed ( capacity 1tons ) along with renewal of pin, sleeve, bush as per direction of eic. 3 labourand consumable charges 4 cost of material ( actual+10% ) 5 replacement of worn out / damaged anchor wire of the swing pulleys ( dia 18 mm, length 120 m ) . the wire rope of ladder pulleys ( dia 22mm ) to be checked and if required to replaced with same length and steel grade wire rope as required as per direction of eic. 6 labourand consumable charges 7 auxilary spud of the dredger was reported not holding and falling automatically, same is to be serviced / repaired and make fully operational as required as per direction of eic. 8 labour charges 9 cost of material ( actual+10% ) 10 top overhauling of both the generator engine model no. s3.8g4, make cummins , capacity: 52 bhp, speed :1500 rpm , is to be done, cooler to be cleaned, radiator to be serviced & cleaned, silencer, safety system to be checked & serviced, checking of exhaust line, repairing of exhaust lagging etc; 2 set of filters etc to be given as required as per direction of eic. 11 labour charges 12 cost of spares ( actual + 10% ) 13 installation of 500 litres capacity water tank on roof of toilet with pump of suitable capacity ( for filling the same ) with pipelines and other accessories such as valves etc. upto toilet / washroom in the vessel as per direction of surveyor / eic. 14 labour charges 15 cost of spares ( on actual + 10 % basis ) 16 fabrication and installation of removable shed on deck over the engine room area including steel structure, frp sheet of good quality and other required material, labour charges all complete as per direction ofeic. 17 labour charges 18 cost of spares ( on actual + 10 % basis ) 19 repairing of the toilet of the vessel with necessary repairing of the structures, tiles and other structural parts all complete as per direction ofeic. 20 labour charges 21 cost of spares ( on actual + 10 % basis ) 22 falls ceiling in the operating room of the dredger are reported damage, same to be renewed with good quality water proof ply with sunmica alongwith its frame as required as per direction of eic. 23 labourcharges 24 cost of spare / material actual + 10% basis 25 fixed operator chair in the wheel house was reported damage, same to be repaired with good quality cushion and to be covered with seat cover of good quality as required as per direction of eic. 26 truck tyre alongwith bull dog clamp and wire ropeto be supplied and fitted including labour and material as required as per direction of eic. 27 provision of spare for completing the repair work for boq sl. no. 01 to 11...
38419974 tender for providing and construction of toilets with upvc sheets/ frp sheets or moulded sheets with water supply arrangement and maintenance on the occasion of rajgir malmas mela 2023...
38410371 tender for providing and construction of toilets with upvc sheets/ frp sheets or moulded sheets (modular) with water supply arrangement and maintenance on the occasion of rajgir malmas mela 2023...
38406188 tender for providing and construction of toilets with upvc sheets/ frp sheets or moulded sheets (modular) with water supply arrangement and maintenance on the occasion of rajgir malmas mela 2023...
38253485 tender for providing and construction of toilets with upvc sheets/frp sheets or moulded sheets (modular) with water supply arrangement and maintenance on the occasion of rajgir malmas mela 2023....
38249674 tender for providing and construction of toilets with upvc sheets/ frp sheets or moulded sheets (modular) with water supply arrangement and maintenance on the occasion of rajgir malmas mela 2023....
38214606 tender for providing and construction of toilets with upvc sheets/ frp sheets or moulded sheets (modular) with water supply arrangement and maintenance on the occasion of rajgir malmas mela 2023....
37078064 tender for ( i ) renovation of training centre at crane shop inside workshop jamalpur under sse / w / ws / jmp. ( ii ) improvement of 140 tone crane testing yard with drainage system, pit construction of motor cycle stand for crane shop and changing of broken g.i.sheet and frp sheet & improvement of toilets with drinking water facilities inside workshop jamalpur under sse / w / ws / jmp....
33040304 bids are invited for fibre reinforced plastic sheet (frp) sheet is 10192 (q3) total quantity : 400...
31773825 bids are invited for light emitting diode led fixture led tube light (q3) , led lamps bulb is:16102 (q2) , led based indicating lamp for panel cut outs (q2) , plug and socket distribution board (q3) , astronomical timer for street light control (timer controls) is :9000 (q3) , fibre reinforced plastic sheet (frp)sheet is 10192 (q3) , power contactors is:13947 4 1 (q3) ,rotary switch (q3) , circuit breakers with integralovercurrent protection (rcbo) as per is: 12640 (part 2)iec61009 1 (q3) , feeder pillar (q3) total quantity : 13503...
30867563 bids are invited for fibre reinforced plastic sheet (frp) sheet is 10192 (q3) total quantity : 150...
30046121 bids are invited for fibre reinforced plastic sheet (frp) sheet is 10192 (q3) () total quantity : 150...
27765658 supplying ,installation & commissioning of multilane slide 2 lane (product area 7.7 mt. x 2 mt.) slide & plateform is made with 34 mm. thick fibre reinfirced plastic (frp) supported with tsupport made up 80 nb g.i. pipe, ladder is made up of 40 nb g.i. pipe and having railing of 25 nb. steps are made 16 swr g.i. sheet & slide entry railing is made in 20 nb g.i. pipe including all taxes and as per specification & approval of e/i. supplying ,installation & commissioning of spiral slide 2.10 mt. (product area 3.2 mt. x 2 mt.) slide is made up of fibre reinfirced plastic (frp) having shell thickness 34 mm. supported by center support of 80 nb g.i. pipe. the landing supports by two 20 nb g.i. pipe. ladder is made up of 25 nb g.i. pipe and having railing of 15 nb & 20 nb pipe. triangular shape steps are made 16 swr g.i. sheet including all taxes and as per specification & approval of e/i. supplying ,installation & commissioning of triple wave slide (product area 5.5 mt. x 2.5 mt.) is made with fibre reinfirced plastic (frp) supported by 80 nb g.i. pipe, ladder is made up of 20 nb & 25 nb g.i. pipe and having railing is made of lldpe. steps are made in 16 swg gi sheet & slide entry railing is made in 20 nb g.i. pipe including all taxes and as per specification & approval of e/i. supplying ,installation & commissioning of four seater arc swing (product area 6.5 mt. x 1.5 mt.) with arch shape side frame is made of 80 nb g.i. pipe, top frame 50 nb g.i. pipe and swing 10 mm. thick anti skid chequerred reinforced rubber top supported by 6 mm. g.i. chain with installation as per specification & approval of e/i. supplying ,installation & commissioning of double arc swing (product area 3.2 mt. x 1.5 mt.) with side frame 80 nb g.i. pipe, top frame 50 nb g.i. pipe and swing 10 mm. thick anti skid chequerred reinforced rubber top supported by 6 mm. g.i. chain with installation as per specification & approval of e/i. supplying ,installation & commissioning of twindler go round (product area 1.5 mt. dia) consists of circular non skid type fibre reinforced plastic (frp) having 34 mm. thickness. the plateform is mounted over the suitable bearing assemble through a steel frame. handrail is made up of 20 nb g.i. pipe that are fixed to the plateform frame including all taxes and as per specification & approval of e/i. supplying ,installation & commissioning of animal mgr (product area 2.1 mt. dia) main frame is made up of 25 nb & 40 nb powder coated g.i. pipeand stand is in 80 nb gi pipe. the animal seats are made out of moulded plastic (lldpe). it is mounted on heavy duty bearing shaft permanently lubricated with water sealant including all taxes andas per specification & approval of e/i. supplying ,installation & commissioning ofcristal maze (product area 2.5 mt. x 2.5 mt.) is fabricated out of crc pipe having outer dia of 19 mm. these pipes are assembled each together using 4 mm. thick ms plates of 150 mm. dia. the whole structure is supported on 40 nb gi pipe with installation as per specification & approval of e/i. supplying ,installation & commissioning of s bridge ladder scrambler (product area 4.3 mt. x 2.4 mt.) is fabricated from 25 nb & 20 nb gi pipes. the vertical supports are of 40 nb gi pipe with total ht. of 2.1 mts. it has two ladders are made from 40 nb gi pipes and its steps are 20 nb gi pipes with installation as per specification & approval of e/i. 10 supplying ,installation & commissioning of half round net (product area 3.3 mt. x 1.7 mt.), semicircle horizontal pipe and center vertical support is made of 40 nb gi pipe and end supports are of 80 nb gi pipe bolted to each other. nylon ropes is attched to the frame with uhook and tightly hold by nylon clams including all taxes and as per specification & approval of e/i. 12 supplying ,installation & commissioning of flying butterfly (product area 2 mt. x 1.5 mt.) leg support is made up of 40 nb, top bar is of 50 nb and frame is from 20 nb & 25 nb poder coated g.i. pipe. the frame is attached to the top pipe by heavy duty bearing including all taxes and as per specification & approved of e/i. 13 supplying ,installation & commissioning of multiseater seesaw (product area 3.00 mt. x 0.50 mt.) the lever consists of 20 nb & 80 nb gi pipe and stand i of 50 nb gi pipe. heavy duty nylon bush type bearing used in this product including all taxes and as per specification & approval of e/i. 14 supplying ,installation & commissioning of dolphin seesaw (product area 0.40 mt. x 0.75 mt.) the seats are made up of lldpe and characters are from hdpe material. the lever consists of 50 x 25 x 3 mt. thick rectangular pipe which is connected to steel spring assembly each with the help of 2 m.s. square plate (top & bottom) and ubolt including all taxes and as per specification & approval of e/i. 15 supplying ,installation & commissioning of shark spring rider (safe play area 2.80 mt. x 2.30 mt.) is comprises of flexible spring and hdpe sheets of high quality including all taxes andas per specification & approval of e/i. 16 supplying ,installation & commissioning of vip bench (product area 1.2 mt. x 0.60 mt.) seating and backrest portion is made from frp c channel wood finish strip is 34 mm. thick. the stand are made up of cast iron including all taxes and as per specification & approval of e/i. 17 supplying ,installation & commissioning of fish bin (product area 0.38 mt. dia) is made up from frp sheet with 34 mm. thick sheet of dia 1.25 feet & given a shape of a fish including all taxes and as per specification & approval of e/i....
20752344 bids are invited for fibre reinforced plastic sheet ( frp ) sheet total quantity 500...
17045096 tender for stop disc board 600mm dia 2mm thick frp sheet with high intensity typefrom 25x25mm m.s angle. make bose enterprise or similar....
6238386 repairing to gutter ridge frp sheet and painting to all steel works sheds etc at trs shed at mughalsarai under aen i mughalsarai...