46762305 bids are invited for sitc 3tr ductable ac ductable split ac unit , itc , extra copper pipe , ducting , grills , volume control damper , canvass , power cable , electrical control , pvc pipe , iron stand , flexible pvc pipe , 8swg dia gi wire total quantity : 1052...
46583089 bids are invited for lrb rock wool 100mm thick; 105 kgcu. mtr bulk density with both side gi wire nett; ntpc kahalgaon r& , lrb rock wool 75mm thick; 105 kg cu. mtr bulk density with both side gi wire nett; ntpc kahalgaon r&m total quantity : 18400...
46528753 bids are invited for safety ppe items 1 22 safety helmet , safety shoes , safety googles , 30 mtr gi wire rope retractable fall arrester , 15 mtr gi wire rope retractable fall arrester , 20 mtr gi wire rope retractable fall arrester , 25 mtr gi wire rope retractable fall arrester , control descend device with rescue hoisting facility , ultratek multipurpose harness , polycotton on one side blue dotted 45 gm hand gloves , cut level 1 hand gloves , 0.38 mm thickness nitrile rubber flocklined glove , reflective jacket , stainless steel fall arrester for 14 mm dia , braided rope with one side hook and other side end stop knot , barrication tape , safety cone , barricading chain for safety cone , pvc gumboot , foldable stretcher , shoulder pad , wheel chair , fire extinguisher , fire extinguisher abc powder , fire extinguisher afff foam , pa system total quantity : 6120...
46298897 bids are invited for lrb rock wool 75mm thick; 105 kgcu. mtr bulk density with both side gi wire nett; ntpc kahalgaon fgd total quantity : 2910...
46254845 tender for construction of prefabricated pre engineered building at roof top of ipd b block b side, department of anaesthesiology at aiims patna.; 1 reinforced cement concretereinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone iii) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). 2 centering and shuttering including strutting, propping etc. and removal of form for lintels, beams, plinth beams, girders, bressumers and cantilevers 3 steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.thermo mechanically treated bars of grade fe 500d or more. 4 cladding work providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer in charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 5 wood and p. v. c. workproviding wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). sal wood 6 providing and fixing isi marked flush door shutters conforming to is : 2202 (part i) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including isi marked stainless steel butt hinges with necessary screws 7 providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with isi, is : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. 8 providing and fixing aluminium sliding door bolts, isi marked anodised (anodic coating not less than grade ac 10 as per is : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :300x16 mm 9 providing and fixing aluminium tower bolts, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 300x10 mm 10 providing and fixing aluminium handles, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm 11 providing and fixing aluminium hanging floor door stopper, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.twin rubber stopper 12 providing and fixing factory made upvc glazed/ wire mesh windows/ doors comprising of lead free upvc multi chambered frame, sash and mullion/ coupler (wherever required) extruded profiles having minimum wall thickness of 1.70 mm for series r1 and r2 profiles and 2.10 mm for series r3 and r4 profiles conforming to en: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per cpwd specification, upvc extruded glazing beads, interlocks and inline sash adaptor (whereever required) of appropriate dimension, epdm gasket, hardware, ss 304 grade fasteners of minimum 8 mm dia. with countersunk head, comprising of matching polyamide pa6 grade sleeve for fixing frame to finished wall as per is 1367: part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to cpwd specification & direction of engineer in charge. section of steel reinforcement and cross sections of upvc profiles to be as per design approved by engineer in charge. wire mesh/ glazing of plain/toughened/ laminated/ double glass unit with/without high performance coatings as per design requirements and conforming to is: 3548 & is: 16231 shall be paid separately. note: structural design proof checked from a government engineering institute, to be provided by the manufacturer for: (iii) sites with basic wind speed > 45 m/sec as per is 875 part 3 (iv) sites with structure height more than 20m for all wind speeds.three track three panels sliding window with aluminium channel for roller track, wool pile, nylon rollers with ss 304 body.using r4 series with frame (115mm & above) x (45mm & above) & sash (44mm & above) x (55mm & above) with zinc alloy (zamak) powder coated handle on two end panels along with multi point locking system. (height above 1.8 meter). 13 steel workstructural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 14 flooring providing and laying ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to is : 15622, of approved make, in all colours, shades, except white, ivory, grey, fume red brown, laid on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete. 15 providing and laying vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to i.s. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.size of tile 600x600 mm 16 roofingproviding and fixing thermal insulation with resin bonded fibre glass wool conforming to is: 8183. density 16 kg/m³, 50 mm thick, wrapped in 200g virgin polythene bags placed over existing false ceiling and held in position by criss crossing gi wire. 17 providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion, (i) single socketed pipes. 110 mm diameter 18 providing and fixing on wall face unplasticised pvc moulded fittings/ accessories for unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion.bend 87.5°110 mm bend 19 providing and fixing on wall face unplasticised pvc moulded fittings/ accessories for unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion.shoe (plain) 110 mm shoe 20 providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per is: 277, in 240 mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15 18 microns using self drilling/ self tapping screws cmplete: ridges plain (500 600mm) 21 providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per is: 277, in 240 mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15 18 microns using self drilling/ self tapping screws cmplete: flashings/ aprons.( upto 600 mm) 22 providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per is: 277, in 240 mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15 18 microns using self drilling/ self tapping screws cmplete: gutter (600 mm over all girth) 23 providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main t runner with suitably spacedjoints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross t of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main t at 600 mm center to center to form a grid of 1200x600 mm and secondary cross t of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. main t runners to be suspended from ceiling using gi slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm gi adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main t, bottom exposed width of 24 mm of all t sections shall be pre painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by engineer in charge. gi metal ceiling lay in perforated tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of gi sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having nrc (noise reduction coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black glass fiber acoustical fleece. 24 finishing finishing walls with acrylic smooth exterior paint of required shade :new work (two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 25 finishing with deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers specifications : two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm 26 dismantling and demolishingdemolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer in charge. nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) 27 dismantling g.i. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of engineer in charge :above 40 mm nominal bore 28 providing and fixing g.i. pipes complete with g.i. fittings and clamps including cutting and making good the walls etc. internal work exposed on wall40 mm dia nominal bore 29 providing and fixing g.i. pipes complete with g.i. fittings and clamps including cutting and making good the walls etc. internal work exposed on wall 50 mm dia nominal bore 30 making connection of g.i. distribution branch with g.i. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :25 to 40 mm nominal bore 31 providing and fixing gun metal gate valve with c.i. wheel of approved quality (screwed end) : 40 mm nominal bore 32 providing and fixing g.i. union in g.i. pipe including cutting and threading the pipe and making long screws etc. complete (new work):40 mm nominal bore 33 providing and fixing g.i. union in g.i. pipe including cutting and threading the pipe and making long screws etc. complete (new work): 50mm nominal bore 34 providing and fixing glazing in aluminium door, window , ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in charge . (cost of aluminium snap beading shall be paidin basic item):with float glass panes of 8 mm thickness (weight not less than 20 kg/sqm) 35 water proofingproviding and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying:(a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm.(b) laying second layer of fibre glass cloth when the first layer is still green. overlaps of joints of fibre cloth should not be less than 10 cm.(c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. this will be allowed to air cure for 4 hours followed by water curing for 48 hours. the entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around.(d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately .for the purpose of measurement the entire treated surface will be measured. 36 new technologies and materialsdesigning, providing, installing and fixing factory finished custom designed cold form light gauge steel framed super structure comprising of steel wall panel, trusses, purlins etc manufactured out of minimum 0.75 mm thick steel sheet as per design requirements. the steel sheet shall be galvanized (az 150gms aluminium zinc alloy coated steel having minimum yield strength 300 550 mpa) conforming to aisi specifications and ibc 2009 for cold formed steel framing and construction and also as per is: 875 1987, iso 800 1984 and is:801 1975. the wind load shall be as per provisions of is 875 (part iii). lgsfs frame shall be designed as per is: 801 using commercially available software such as frame cad pro 11.7/ staad pro v8i/ architekv2.5.16/ revit architecture 2011 or equivalent.proper usage of connection accessories like heavy duty tension ties, light duty hold ons, twist straps (to connect truss with wall frames), strong tie, tie rod, h brackets, boxing sections, l shaped angles for better structural stability. the framing section shall be cold form c type having minimum web depth 89 mm x 39mm flange x 11mm lip in required length as per structural design requirement duly punched with dimple/ slot at required locations as per approved drawings. the slots will be along centre line of webs and shall be spaced minimum 250mm away from both ends of the member. the frame can besupplied in panelized or knock down condition in specific dimensions and fastened with screws extending through the steel beyond by minimum of three exposed threads. all self drilling tapping screws for joining the members shall have a type ii coating in accordance with astm b633(13) or equivalent corrosion protection of gauge 10 & 12, tpi 16 & 8 of length 20mm. the frames shall be fixed to rcc slab or tie beam over neoprene rubber using self expanding carbon steel anchor bolt of dia as per approved drawings. design subject to minimum 12mm diameter and 121mm length conforming to aisi 304 and 316 at 500mm c/c with minimum embedment of 100mm in rcc (rcc to be paid separately) and located not more than 300mm from corners or termination of bottom tracks complete in all respects. the item also includes the submission of stability reports duly examined and issued by any nit/iit. the rate includes the concept design, detailed design, fabrication of sections, transportation, installation and all required fixingarrangement at site as described above. 37 providing and fixing of external wall system on light gauge steel frame work with outer face cement boards as per standard sizes fixed with self drilling / taping screws / fasteners @ 60cm c/c of approved make. a groove of 2 mm to 3mmshallbe maintained andgrooves shallbe sealed withsilicon based sealant. the board shall be fixed in a staggered pattern. screws shall be of counter sunk rib head of 1.60mm to 4 mm thick or 8 to 10 gauge of length varying from 25 to 45 mm and. internal face 12.5 mm thick gypsum plaster board fixed on cement board as per standard sizes fixed with self drilling / taping screws / fasteners @ 60cm c/c of approved make, proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic based jointing compound for seamless finish.(cost of frame work to be paid for separately)outer face outer face having 6mm thick fiber cement board type a,category ivasper is:14862:2000fixedon9mmthick fiber cement board, type a, category iv as per is:14862:2000 (high pressure steam cured)inner face 12.5 mm thick gypsum plaster boardconformingtois2095:2011fixedon 8mmthickfibre cementboardoftypeb,category iiiconformingto is:14862:2000 (high pressure steam cured) 38 providing and fixing internal wall panels on light gauge steel frame work with 12.5mm thick gypsum plaster board conforming is 2095:2011 fixed on cement board as per standard sizes fixed with self drilling / taping screws / fasteners @ 60cm c/c of approved make, screws shall be of counter sunk rib head of 1.60mm to 4 mm thick or 8 to 10 gauge of length varying from 25 to 45 mm. proper taping and jointing to be done using fiber mesh tape andepoxy and acrylic based jointing compound for seamless finish.(cost of frame work to be paid for separatelycement fiber board 8 mm thick oftype b, category iii as per is 14862:2000 (high pressure steam cured) 39 supply , fittings and fixing of roller blinds with pully mechanism system with black out rich fabric etc all completed as per direction of engineer in charge 40 providing and fixing prefab roof made up of sandwich panel of 100mm thick of expended polystrene eps in pills having one sides precoated galvanised steel sheet of 0.5 mm thickon side flat and other side corrugated profiled roof with heat resistance etc all complete job 41 wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm frls pvc insulated copper conductor single core cable in surface i recessed steel conduit, with modular switch, modular plate, suitable gl box and earthing the point with 1.5 sq. mm frls pvc insulated copper conductor single core cable etc. as required.group a 42 wiring for circuit/ submain wiring alongwith earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface/ recessed steel conduit as required 2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire 43 wiring for circuit/ submain wiring alongwith earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface/ recessed steel conduit as required2 x 4 sq. mm + 1 x 4 sq. mm earth wire 44 wiring for circuit/ submain wiring alongwith earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface/ recessed steel conduit as required 2 x 6 sq. mm + 1 x 6 sq. mm earth wire 45 wiring for circuit/ submain wiring alongwith earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface/ recessed steel conduit as required 4 x 16 sq. mm + 2 x 6 sq. mm earth wire 46 supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 a switch 47 supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 15/16 a switch 48 supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 a socket outlet 49 supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 a socket outlet 50 supplying and fixing following size/ modules, gl box alongwith modular base & cover plate for modular switches in recess etc. as required. 3 module (100mmx75mm) 51 supplying and fixing following size/ modules, gl box alongwith modular base & cover plate for modular switches in recess etc. as required.6 module (200mmx75mm) 52 supplying and fixing following size/ modules, gl box alongwith modular base & cover plate for modular switches in recess etc. as required.8 module (200mmx75mm) 53 installation,testingandcommissioningofceilingfan,including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mmfrlspvcinsulated,copperconductor,singlecorecable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required. 54 installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. upto 450 mm sweep 55 supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, tpn mcb distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting mcb’s (but without mcb’s and incomer ) as required .(note : vertical type mcb tpdb is normally used where 3 phase outlets are required.) 8 way (4 + 24), double door 56 supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 ka, “c” curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. single pole 57 supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 ka, “c” curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required.single pole and neutral 58 supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 ka, “c” curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. triple pole and neutral 59 supplying and fixing 20 amps, 240 volts, spn industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps “c” curve, sp, mcb, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing andmmissioning etc. as required. 60 supplying, installation, testing & commisioning of following capacity plug in/ tap off box on the existing air insulated compact type bus trunking/ rising mains for use on 3 phase 4 wire 415 v, 50hz a.c. supply made with 1.6mm thick sheet steel enclosure (ip54) duly powder coated with provision of mccb (but without mccb) complete etc. as required125 a, lsc= 15ka for 1 sec (make: c&s) 61 providing and fixing 6 swg dia gi. wire on surface or in recess for loop earthing as required. 62 laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on wall surface as required.above 35 sq. mm and upto 95 sq. mm(clamped with 25x3mm ms flat clamp 63 supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required. 3½ x 70 sq. mm (38mm) 64 supply, installation, testing and commissioning of 1200 mm sweep, bee 5 star rated, ceiling fan with brush less direct current (bldc) motor, class of insulation: b, 3 nos.blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, power factor not less than 0.9, service value (cmm/w) minimum 6.85, air delivery minimum 215 cmm, 350 rpm (tolerance as per is : 374 2019), thd less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree c (max.), insulation resistance more than2 mega ohm, suitable for 230 v, 50 hz, single phase ac supply, earthing etc. complete as required. 65 supplying & fixing 3.5 c x 70 sq. mm alarmoured cable xlpe 66 sitc of 15/18 w led down light cool day1x1 ftmake:syska,havells,philips. 67 sitc of 36/40 w led down light cool day2x2 ftmake:syska,havells,philips. 68 sitc of 300 mm exhaust fan 69 supply and fixing of 25 mm pvc casing bit 70 supply and fixing of 125 amp. 4 p 25 ka mccb at & fmmake: havells,l&t 71 metallic enclosure with spreader link suitable for above mentioned mccb 72 2 ton , bee 5 star invertersplit ac 73 providing and fixing copper line with insulation suitable for 2 tr split ac units (suctipon and discharge taken in one unit)dia of pipe: 5/8 &1/4 74 supplying and fixing drain pipe as per suitable for 2 tr split ac unit. 75 standard outdoor stand suitable for outdoor units for 2 tr split ac unit. 76 3 core 4 sq mm pvc insulated copper wire. 77 installation of ac 78 98 inch ultra hd interactive flat panel display with inbuilt android 11 os ,google pay store , 8 gb ram & 64 gb storage with two inbuilt speakers of 25 watt each along with subwoofer , multiple connectivity option like , 3 nos. of hdmi in vga in , audio in and out , 4 nos. of usb 3.0 rj45, inbuit dual band wi fi (2.4 & 5 ghz.)with hotspot and bluetooth 5.0 , interactive teachinng software , 4 mm tempered glass with anti glare coating and more with wall mount kit. ...
45530539 bids are invited for genrel item plywood for general purposes as per is 303 (v2) (q3) , hydraulically regulated door closers (q3) , tower bolts (ferrous metals) as per is 204 (q3) , wood screws (q3) , non ferrous metal butt hinges as per is 205 (q3) , wire nails (q4) , door handles as per is 208 (q4) , hasps and staples as per is 363 (q3) , wire mesh fabric or cloth (v2) as per is 1568 (q3) , stainless steel kitchen plate rack 30 cm into 36 cm into 9 cm , looking mirror 600 into 450 mm , fevicol 1 kg , pvc rawl plug 100 nos pkt , window glass ordinary 3 mm thick 1 point 2m into 1 point 2m , wooden beading of size 20mm into 6mm into 8 inch , wooden beading of size 20mm into 20 inch size 20mm into 6mm into 20 inch , round plug wooden , gi wire binding , bracket for curtain rod , putty 1 kg pkt , aluminum curtain rod 19 mm dia into 12ft lenght , super flush strip 100 mm wide 10 mtr long , pvc float valve 20 mm , gate valve brass 20mm , hack saw blade , gate valve 15 mm , gate valve 25 mm brass , pvc float valve 15mm , pvc float valve 25 mm , pvc stop cock 15mm dia , water storage tank 500 l isi marked , pvc lid for 1000 ltrs capacity , pvc lid for 500 ltrs capacity , m seal 200 gms pkt , brass jumper washer for 15 mm bib tap , hdpe grating 100 mm dia , gi hook for pipeline , gi check nut 20mm , gi check nut 25mm , cp glass self 450 mm long with 4mm glass , ms angle bracket for whb , cement 50 kg , white cement 1 kg , pad lock 6 lever , drill bit for brick hole 4mm 5mm 6mm 8mm and 10mm 1 50 total quantity : 437...
45371384 tender for purchasing machines, equipment and materials for egg edible plantation/insect rearing/seed storage year 2024 25, 1. eri seed 2. vermi compost for eri rearing equipment 1. rearing platform 2. plastic rearing tray 3. shaded net 4. plastic mountage 5. leaf preservation chamber 6. plastic basket 7. knapsack sprayer 8. bleaching powder 9. hook 10. g.i. wire, 9. hook 10. g.i. wire for private erigraineur 1. eri grainage stand 2 microscope with light arrangement. 3. egg laying boxes/nylon net/kharikas 4. bamboo cages (coupling) 5. wooden mouth testing table 6. wooden stools 7. plastic drum 8. plastic bucket 9. plastic tub 10. plastic tub 11.plastic mug 12.morter & pestle 13. measuring cylinder 14. weighing balance 15.disinfection mask 16.gi wire 17. wet & dry thermometer 18.max. min thermometer 19. gator sprayer 20.formalin 21.koh 22. bleaching powder 23.bloting paper 24. muslin cloth 25.scissors 26.slides and cover slip 27. lime for eri disinfectants 5. 1. asthra 2. sanitech 3. rakshak 4. roger...
45089669 tender for provision of sainik institute at mil stn gaya; 2 schedule a part i (building work)lump sum price worked out by the contractor for building work as listed in schedule a part i against the lump sum price inserted by the mes. 3 sch a part ii (internal water supply)lump sum price worked out by the contractor for internal water supply) as listed in schedule a part ii against the lump sum price inserted by the mes. 4 sch a part iii(internal electric supply)lump sum price worked out by the contractor for internal electric supply as listed in schedule a part iii against the lump sum price inserted by the mes. 5 sch a part iv(external water supply)lump sum price worked out by the contractor for external water supply as listed in schedule a part iv against the lump sum price inserted by the mes. 6 sch a part v(external electrific supply)lump sum price worked out by the contractor forexternal electrific supply as listed in schedule a part v against the lump sum price inserted by the mes. 7 sch a part vi(road, path and culvert)lump sum price worked out by the contractor for road path and hard standing as listed in schedule a part vi against the lump sum price inserted by the mes. 8 sch a part vii(sewage disposal)lump sum price worked out by the contractor for sewage disposal as listed in schedule a part vii against the lump sum price inserted by the mes. 9 sch a part viii (area drainage)lump sum price worked out by the contractor for area drainage as listed in schedule a part viii against the lump sum price inserted by the mes. 10 sch a part ix(site clearance, excavation & earth works)lump sum price worked out by the contractor for site clearance, excavation & earth works as listed in schedule a part ix against the lump sum priceinserted by the mes. 11 note for srl no 2 to 10the percentage above / below the ssr 2020 (part ii) rates shall be derived from the amount quoted by the contractor against srl no. 2 to 11by comparing it with the amount inserted / pre priced by the department and the same shall be applicable for the items of respective schedule 12 schedule a part x (miscellaneous works) 13 item no 01 : supply, install, commissioning and testing of split type wall mounted air conditioner of capacity 1.5 tr (4500 k cal/hr) single phase, (non cfc/hchc) suitable for 230 volt +10%, 50 hz, ac supply complete with cordless remote control unit, minimum bee 3 star rating, eer of 5.02 and above complete all as specified and directed. 14 item no 02 : supply and fixing voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 v to 250 v with output voltage stabilized at 230 v with accuracy of ± 2.5% and of capacity 4 kva complete all as specified and directed. 15 item no 03 : supply and fix water cooler electric driven (single phase), having approx storage capacity of 80 litre and nominal cooling capacity of 40 litres per hour complete all as specified and directed. 16 sewage disposal 17 item no 04 : m&l for dwc hdpe pipes class sn 8 laid in trenches of 150 mm internal diameter of pipe and jointed as specified complete all as specified and directed. 18 item no 05 : m&l for dwc hdpe pipes class sn 8 laid in trenches of 100 mm internal diameter of pipe and jointed as specified complete all as specified and directed. 19 arboriculture 20 item no 06 : material & labour for continuous brick on deging with width equal to the depth of the brick laid dry on end at the required angle with modular bricks sub class b bricks complete all as specified and directed. note: the rate quoted by the tenderer for this item shall be inclusive of embedding bricks in the ground upto the required depth and tempering the ground around bricks and removing surplus soil to a distance not exceeding 100 m complete all as specified and directed. 21 item no 07 : supply & plant ashoka plant of height 7 complete all as specified and directed. 22 item no 08 : supply & plant cycas leaf palm of height 4 of height 7 complete all as specified and directed. 23 item no 09 : supply & plant sampen palm of height 5 of height 7 complete all as specified and directed. 24 item no 10 : supply & plant triangular palm of height 7 complete all as specified and directed. 25 item no 11 : supply & plant triangular plant of height 7 complete all as specified and directed. 26 item no 12 : supply & plant bottle palm of height 7 complete all as specified and directed. 27 item no 13 : supply & plant china palm of height 1 complete all as specified and directed. 28 item no 14 : supply & plant pichutia palm of height 4 complete all as specified and directed. 29 item no 15 : supply & plant red palm of height 6 complete all as specified and directed. 30 item no 16 : supply & plant areca palm of height 7 complete all as specified and directed. 31 item no 17 : supply & plant ficus palm of height 4 5 complete all as specified and directed. 32 item no 18 : supply & plant golden cypress plant of height 5 complete all as specified and directed. 33 item no 19 : supply & plant silver star plant of height 1 2 complete all as specified and directed. 34 item no 20 : supply & plant coconut plant of height 7 complete all as specified and directed. 35 item no 21 : supply & plant euforbia plant of height 1 complete all as specified and directed. 36 item no 22 : supply & plant supari palm of height 7 complete all as specified and directed. 37 item no 23 : supply & plant foxtail palm of height 7 complete all as specified and directed. 38 item no 24 : supply & plant green vichia palm of height 7 complete all as specified and directed. 39 item no 25 : supply & plant cantia palm of height 7 complete all as specified and directed. 40 item no 26 : supply & plant ravenea palm of height 4 complete all as specified and directed. 41 item no 27 : supply & plant rhapis palm of height 4 complete all as specified and directed. 42 internal electrical supply 43 item no 28 :m & l for point wiring using approved colour coding as per is, with multistranded copper conductor1.5 sq. mm (nominal area), single core, pvc insulated and unsheathed frlsh cable 1100 volts gradeisi 694 marked drawn through in and including heavy duty, pvc concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty isi marked, including pvc insulated multistranded copper conductor 1.5 sqmm (nominal area) single core frlsh cable as earth continuity conductor to common earth and connecting to earth dolly includingcutting, chasses and makinggooddisturbed surface to match with existing finish with plaster complete all as specified and directed for the following : 44 (a) one light point controlled by one, one way switch 5 amps 45 (b) one fan point/ exhaust fan point controlled by one, one way switch 5 amps and regulator 46 (d) one 3 point 5 amps switch socket outlet point controlled by one switch on the same board. 47 (e)one 3 pin 5 amps switch socket outlet point controlled by one switch on independent boad. 48 item no 29 :description all as per item no 28 here in before butusing 2.5 sq mm single core copper conductor two noscables of multistranded flame retardant pvc insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of2.5 sq mm copper conductor flame retardant pvc wire as earth continuity conductor along with wiring and connecting to the common eath dolly. 49 item no 30 :description all as per item no. 28 here in before butusing 4.0 sq mm single core copper conductor two nosfrlsh cable of multistranded pvc insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of4.0 sq mm pvc insulated copper conductor frlsh cable as earth continuity conductor along with wiring and connecting to the common eath dolly. (for ac point) 50 item no 31 : s & f modular metal flush box 8 module 51 item no 32 : s & f modular metal flush box 12 module 52 item no 33 : s & f modular white cover plate with frame 12module 53 item no 34 : m & l forsub main wiring with approved colour coding as per is with two single core pvc insulated frlsh cable with stranded copper conductor of size 6 sq mm nominal area and drawing into suitable size of pvc non metallic rigid heavy duty pvc conduit of white/ ivory colour and its accessaries isi marked heavy duty of suitable sizeincluding concealed in wall etcone run of pvc insulated with 6.0 sqmm (nominal area) stranded copper conductor frlsh cable as earth wire complete all as specified and as directed. note: two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of pvc conduit will be measured as one unit 54 item no 35 : s & f for sheet metal enclosure mcbdbtpn4 way verticaltype with 200 amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the dbs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. 55 item no 36 : s & f for sheet metal enclosure mcbdbspn8 way with 200 amps rated bus bar 240 volts double door including blanking plate for dummy space with magnitic locking system including necessary provision for inserting the dbs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specifiedand as directed. 56 item no 37 : s & fformcb four polerated capacity 63 amps, 415 volts breaking capacity 10 ka, c curve complete all as specified and as directed. 57 item no 38 : s & f for mcb dp rated capacity 32amps, 240 volts breaking capacity 10 ka, c curve complete all as specified and as directed. 58 item no 39 : s & ffor mcb single pole rated capacity 6 32 amps, 240 volts breaking capacity 10 ka, c curve complete all as specified and as directed. ( 6a 15 nos, 10a 05 nos, 16a 10nos, 32a 08 nos) 59 item no 40 : s & ffor metal clad box suitable for 230 volt 50 hz ac supply with threee pin power socket & plug top 15 amp including mcb sp 25 ampcomplete all as specified and as directed complete all as specified and as directed 60 item no 41 : supply and fixing ceiling fans complete with blades, down rods, electronic regulator modular type and accessories, 230 v, 1200 mm sweep. min air delivery 210 cfm with service value 6.0 bee. five star rated with brushless direct current motor (bldc) complete all as specified and as directed. 61 item no 42 : s & f forled 10 watts batten aluminium extruded with decorative end caps with luminous efficacy not less than 120 lumen/watt complete all as specified and as directed. 62 item no 43 : s & f led luminaire surface/recess mounted type 36 watt, approx size of600mm x 600mm, 230 voltswith crca housing with and intregrated electronic driverconnector block with luminous efficacy not less than 120 lumen/watt etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired andnecessary mounting arrangements, provision of new 3 core multistrandedcopper conductor with flexible conduit of 0.75 sqm sizecomplete all as specified and as directed. 63 item no 44 : s & f for wall mounted led tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput with luminous efficacy not less than 120 lumen/wattboxtype fitting, 230 volts and intregrated electronic driverconnector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired andnecessary mounting arrangements, provision of new 3 core multistrandedcopper conductor and flexible conduit of size 0.75 sqm from ceiling rose to fitting complete all as specified and as directed. 64 item no 45 : s & f for energy saving new generation environmental friendly long life versatile presure die cast aluminium ip 66 for security light fitting luminaire with high power leds as light source and electronic driver of capacity 35 wattswith luminous efficacy not less than 110 lumen/wattwith pre wired andnecessary mounting arrangements and provision of 0.75 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia gi pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by engineer in charge. 65 item no 46 : s & f for energy efficient exhaust fan of 300 mm sweep made of metal body ventil air ds type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of pvc flexible copper cable of size 0.75 sqmm three core from ceiling rose to exhaust fan forconnection and making suitable size ofhole to existing brick wall for fan basecompelte all as specifiedand directed. 66 item no 47 : s& f occupancy sensor suspended type to detect the presence of a person for include automatic adjustment of lights systems in response to the quantity of people present for switch off/on the light in a circuit as per user reqmt ( for use at parking area, verandah or any other space where power saving srequired) 67 external electrical supply 68 item no 48 : supply, fabrication, installation and testing of lt panel out door type factory made cpri approved, water and vermin proof protection of size 1000mm x 1000mm x 500 mm (over all dimension) made out of 3.00 mm thick crca sheet dully supported with mild steel angle iron of size 50 x 50 x 6 mm vertical frame and legs with mild steel flat iron 25 x 5 mm in horizontal sides of the frame with front and back side openable, single hinged door / shutter with locking arrengement and powder coated finish both internal and external steel surfaces after necessary preparation of steel surfaces including providing pcc (1:3:6) type c2 foundation of suitable size and connections of all outgoing / incomming cable inclusive of necessary excavation and earthwork as required including the following fitment accessories complete all as specified and directed. 69 incomming(a) copper strip busbar of 100 amps rated capacity wrapped with pvc sleeves with maintained the colour code and provision of making holes with copper nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends 04 nos (b) tpn mcb 40 amps 01 no. (c) on load change over switch tpn of capacity 63 amps 01 no (d) led neon indicator lamp (ryb) with holder and fuse holder 230/250 volts, ac 01 set (set of three) (e) digital ammeter of range (0 100) amps, flush mounting type with ct’s of ratio 100/5 and selector switch 01 set. 70 outgoing(a) mcb tpn 32 amps 02 nos. (one spare) (b) mcb spn 16 amps 01 nos (street light) (c) enamelled iron danger notice plate of 1.60 mm thick mild steel sheet of size 200 mm x 150mm, white with letters, figures and conventional skull and bones in signal red and fixed with nuts and bolts on door / shutter of jb for lt 01 no. 71 item no 49 : s&f pvc junction box of size 350mm x 250mmm x 138mm outdoor type, weather proof, factory made out of pvc sheet 1.8mm thick with front side hinged opening having locking arrangement with nuts & bolts & arrangement for incoming and outgoing cable/wire complete comprising of aluminium bus bar for 3 phases & neutral, insulated with insulators, including colour coding and 01 nos mcb 06 amps complete all as specified and directed. 72 item no 50 : supply and fixing led street light fitting 70 watt 230 v ac outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with ip 65/66 protection complete all as specified and directed. 73 item no 51 : supply and fixing post top lantern led type 40 watt 230 watt volts ac outdoor type with decorative post top for 360 degree indirect light ip 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed. 74 item no 52 : supplying, install and erect in true vertical position steel tubular swaged welded pole complete with ms base plate 6 mm thick and of size 300 x 300 mm, final taper, pole cap, bolts, nuts, washers & screws etc pole made out of erw ms tubing conforming to is 2713 part ii type 410 sp 31 (9.0 metres long) including of holes of reqd nos and size for fixing of cross arms, painting with one coat of red oxide primer and two coats of aluminium paint for exposed surfaces and two coats of black bituminous paint for portion embedded in concrete, painting with synthetic enamel paint (first grade/quality) black & yellow colour at lower portion of exposed pole starting from plinth block band of 1200 mm height (4 nos each strip of 150 mm width) complete all as specified and directed. note: earthwork, cement concrete, cross arms etc. will be measured and paid under approprite items. 75 item no 53 : m & l for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to gi earth strip 32x6mm by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, pcc chamber, ci frame and cover, ms funnel with wire mesh all as shown in electrical plate no 3 of ssr part i including excavation and earthwork in any type of soil/strata and testing on completion. note: gi earth strip 32x6 mm and 40 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted. 76 item no 54 : m & l for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to gi wire 4mm by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, pcc chamber, ci frame and cover, ms funnel with wire mesh all as shown in electrical plate no 3 of ssr part i including excavation and earthwork in any type of soil/strata and testing on completion. note: gi iron strip 4 mm and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted. 77 furniture 78 item no 35 : chair easy fd 229 79 item no 36 : chair tublar steel with armsfd 75(m) 80 item no 37 : chair tublar steel without armsfd 75(m) 81 item no 38 : chair verandahfd/map/ ii/06 82 item no 39 : durrie 18x15tp 83 item no 40 : form with back steel fd 78(m) 84 item no 41 : ladder aluminiumfd 1025 85 item no 42 : receptacle pvcfd/e6/map/13 86 item no 43 : stool steel fd 81(m) 87 item no 44 : table 90x60 cm with drawer fd 283 88 item no 45 : table 90x60 cm without drawer fd 284 89 item no 46 : table 90x90 cm marble top fd 300 90 item no 47 : table office clerk steel fd 1004 91 item no 48 : table 90x90 cm steel fd 1009 92 item no 49 : table steel for serving fd 1011 93 item no 50 : teapoy fd 278 94 item no 51 : teapoy verandahfd/e6/map/17 ...
44873878 tender for supply, installation, testing & commissioning of 06 (six) nos. inverter type 4.0 tr, 3 phase cassette split type air conditioners and 02 nos air curtain for human evolution gallery at shrikrishna science centre (ssc), chajju bagh, west gandhi maidan, patna 800001 (bihar) ; 1 electronics & electrical items : 2 supply, installation, testing and commissioning ofinverter typecassette split air conditioning unit 4.0 tr capacity one outdoor unit415v/50 hz/3 ph., one indoor unit 230 v/ 50hz/1ph ,singlescroll/ twin rotorycompressor thermo sensor temperaturecontrol, 4 way air direction timer setting, auto air swing, multifunction remote, with r 32/410a eco friendly refrigerant and minimum 2 star energy efficient , cost will be inclusive of installation at site as per instructions of the engineer in charge, complete in all aspects. 3 supply and fixing of wall/floor mounting brackets suitable for holding the outdoor unit structure made of 50mmx50mmx5mm ms angle for installation of outdoor unit with anit virbation pad including grouting on wall/floor etc as required depending o nsite condition and as per the instuctions. grouting to be done by cutting necessary holes and grouting with m12 anchor fasteners/cement concrete 1:2:4 and making good the damages with similar finish, two coats of synthetic enamel paint over a coat of metal primer 4 supply and fixing of copper pipe line with good quality high density nitrile rubber foam insulation pipe covering with flexible pvc pipe all complete as per standard specification and practicewith proper saddling (s.s saddle) on wall / terrace including making good the damages with cement mortar 1:2:4 on walls /floor with similar finish.(payment will be made as per actual execution) copper line sizes for4.0tr cassette type air conditioning unit 9.52mmx0.8mm+15.88x0.9mm (liquid line &suction line) ’copper line (payment will be made as per actual execution) 5 supply and laying of control cable of 2.5 sq. mm 4core along with suitable pvc conduitfor indoor unit to outdoor unit along with suitable pvc conduit. (payment will be made as per actual execution) 6 supply installation & testing of 415 volts motor starter and 40amps 4 pole isolator with box complete with connection etc (relay setting 12 16 amp) 7 supply and laying of control cable for mcbto outdoor unit 4.00 sq. mm 4 core pvc insulatedcopper wire + double earthing gi wire . (payment will be made as per actual execution) 8 supply and fixing isi mark extra upvc pipe 25mm/32mm dia with 6.00 mm thick insulation nitrile rubber closed cell, elbow, tee socket for condensate water drainage. (payment will be made as per actual execution) 9 the acs indoor outdoor connection pipeline (copper pipe & cable wire) and water drain pipes are not to rest on false ceiling. they are to be laid by hanging from ceiling with proper supports of gi cable tray (6 thinckness 1mm or more) with proper clamps. supply and fixing heavy duty trough type gi cable tray (6 x 3 x 12ft). (payment will be made as per actual execution) 10 supply, installation, testing and commissioning of air curtain , size 5 feet or more, height covered up to 10 feetmax velocity high 23m/s, low 16m/sfront sloted sleek modelcolour white, front suction suitable for 24x7 operation ...
44867788 estimate of iti mahnar type4 phase 2 ( centre of excellence ) 1 23.12 clearing grass and removal of the rubbish up to distance 50m outside the periphery 2 2.6 earth work in excavation over areas ( exceeding 30 cm in depth. 1.5 m in width as well es 10 sqm on plan) including disposal of excavated earth , lead upto 50 m and lift upto 1.5 m; disposed earth to be levelled and neatly dressed. 3 2.18.2 closed timbering over area depth exceeding 1.5m apart 4 2.27 extra for every additional lift of 1.5 m or part thereof in : 2.27.1 all kinds of soil 5 2.25a excavating, supplying and filling of local earth (including royalty but excluding cairriage cost) by mechanical transport upto a lead of 3km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.if local earth is available at more than 3 km lead the actual lead mustbe approved by compitent authority. cairraiage of material will be paidseperately and calculated after deducting initial lead. 6 2.26 filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering lead 7 2.28 supplying and filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. 8 2.37.3 treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling and plugging 12 mm diameter holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existingfloor. 2.37.3.1 with chlorpyriphos ec 20% with 1% concentration 9 11.72 providing designation 100 a one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of e/l, 10 4.1 providing and laying in position cement concrete of specified grade. 4.1.2 1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) 4.1.3 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 11 16.75 providing and laying c.c. pavement of mix m 25 with ready mixedconcrete from batching plant. the ready mixed concrete shall be laidand finished with screed board vibrator , vacuum dewateringprocess and finally finished by floating, brooming with wire brush etc.complete as per specifications and directions of engineer incharge. (the panel shuttering work shall be paid for separately).(note: cement content considered in this item is @ 330 kg/cum.excess/less cement used as per design mix is payable/ recoverableseparately) 12 5.33 providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, portland pozzolana /ordinary portland /portland slag cement 5.33.1.1 all work upto plinth level : concrete of m 25 grade with minimum cement content of 330 kg/cum 13 5.33.2.1 all work above plinth level upto floor v level. : concrete of m 25 grade with minimum cement content of 330 kg/cum 14 5.22 reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete. 5.22.1a tmtc 500 08 mm dia. 5.22.1b tmtc 500 10 mm dia. 5.22.1c tmtc 500 12 mm dia. 5.22.1d tmtc 500 16 mm dia. 5.22.1e tmtc 500 20 mm dia. 15 5.9 centring and shuttering including strutting, propping etc. and removal 5.9.1 foundations, footings, bases of columns etc. for mass concrete. 16 5.9.3 suspended floors, roofs, landings, balcnies and access platform. 17 5.9.16.1 edges of slabs and breaks in floors and walls : under 20 cm wide 18 5.9.5 lintels, beams, plinth bams, griders, bressumers and contilevers. 19 5.9.6 columns,pillars, piers, abutments, posts and struts 20 5.9.7 stairs,(excluding landings) except spiral staircaces. 21 5.9.19 weather shade,chajjas, corbels etc. including edges 22 6.1a brick work with 100a bricks as per is 12894(2002) & is 3495 in foundations and plinth in : 6.1.14a cement mortar 1 .:6 (1 cement: 6 coarse sand ) 23 6.1c brick work with fly ash bricks as per is 12894(2002) & is 3495 in foundations and plinth in : 6.1.14c cement mortar 1 .:6 (1 cement: 6 coarse sand ) 24 6.1c brick work with fly ash bricks as per is 12894(2002) & is 3495 in foundations and plinth in 6.1.14c+ 6.3c cement mortar 1 .:6 (1 cement: 6 coarse sand ) : extra tor brick work in superstructure above plinth level upto floor v cum 25 6.1.12c brick work with fly ash bricks as per is 12894(2002) & is 3495 in foundations and plinth in cement mortar 1.:4 (1 cement: 4 coarse sand ) 26 11.41. providing and laying vitrifed floor tiles in different sizes {thickness to be specified by the manufactruer) with water absorptions less than 0.08 % and conforming to is : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc., complete. 11.41.2 size of tile 60x60 cm 27 4.17 making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth. 28 6.47a providing 250mm wide brick drain in cement mortar (1:6) with av. 150mm. clear depth and 250mm apron including cost of e/w. involved with 75mm cement concrete 29 13.24 6 mm cement plaster to ceiling of mix : 13.24.2 1:4(1 cement: 4 coarse sand) 30 13.11.4 12 mm cement plaster on rough side of single or half brick wall of mix : (1 : 6) 31 13.12.3 15 mm cement plaster on rough side of single or half brick wall ofmix 32 13.17.2 12 mm cement plaster 1:4( 1 cement: 4coarse sand) finished with afloating coat of near cement details of cost for 10 sqm 33 13.80a.2 providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 34 13.92 wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: 35 13.46.1 finishing walls with acrylic smooth exterior paint of required shade : new work (two or more coat applied @ 1.67 ltr/ 10 sqm over and including priming coat of exterior primer applied 36 26.41 the frame can be supplied in panelized or knock down condition in specific dimensions and fastened with screws extending through the steel beyond by minimum of three exposed threads. all self drilling tapping screws for joining the members shall have atypeii coating in accordance with astmb633(13)or equivalent corrosion protection of gauge10&12,tpi 16&8 of length 20mm.the frames shall be fixed to rcc slab or tie beam over neoprene rubber using self expanding carbon steel anchor bolt of dia as per approved drawings. design subject to minimum 12mm diameter and121mm length conforming to aisi304 and 316 at 500 mmc/c with minimum embedment of100mm in rcc(rcc to be paid separately) and located not more than300mm from corners or termination of bottom tracks complete in all respects. the item also includes the submission of stability reports duly examined and issued by any nit/iit. the rate includes the concept design, detailed design, fabrication of sections, transportation, installation and all required fixing arrangement at site as described above 37 ar system details: providing and laying 3mm thick self levelling epoxy flooring (of approved shade) over trimix/well finished/levelled vdf floor.. ø physical properties of nitoflor eu 5 @ 35ºc ø pot life: 70 minutes, mixed density: 1.80 1.85 g/cc, compressive strength (bs 6319 part 2, 1983): 60 n/mm2 @ 7 days, tensile strength (bs 6319 part 7, 1983): 12 n/mm2 @ 7 days, flexural strength (bs 6319 part 3, 1983): 25 n/mm2 @ 7 days, water absorption (bs 1881 part 122, 1983): nil, curing characteristics @ 35ºc, initial hardness: 16 hours, full cure: 7 days, adhesion: greater than the tensile strength of concrete. physical properties of nitoflor sl 1000: i) pot life @ 27 ºc ii)nitoflor sl1000: 30 min, nitoprime 25: 2 3 hours cure time iii)foot traffic: 24 hours, vehicular traffic: 48 hours, chemical resistance: 7 days iv) mixed density: 1.70 g/cc, compressive strength @7 days (bs 6319): > 50 n/mm2, flexural strength @7 days (bs 6319): > 25 n/mm2, tensile strength @7 days (bs 6319: > 12 n/mm2, abrasion resistance: 0.1mg/ cycle loss of (astm d 4060) weight (with cs 17 wheel of 1000g weight), shore d hardness as per (astm d 2240): >75, adhesion strength: > 1.5n/mm2 @ 7 days (astm d4541) ø application methodology: the prevailing relative humidity should not exceed 75% at any stage of the application. ambient temperature at the time of application 20°c 30°c 40°c. max elapsed time for light spiked rolling from time of final trowel 30 – 60 mins 20 – 30 mins 10 – 20 mins ø surface preparation: • new concrete, or cementitious substrates, should be at least 28 days old and have a moisture content not exceeding 5% (rh <75%).• the substrate should be clean, sound and free from contamination such as mortar and paint splashes curing compounds, oil and grease. excess laitance deposits are best removed by light mechanical scabbling, grinding or grit/captive blasting followed by vacuum cleaning to remove dust debris. all preparation equipment should be of a type approved by fosroc.• all blowholes and other surface undulations greater than 1 mm in depth should be repaired with a proprietary, repair compound consult the local fosroc office for specific recommendations.• oil and grease contamination must be completely removed by grinding down to sound, clean concrete. alternatively, captive/grit blasting techniques can be used to provide the required substrate.• where these methods are considered impracticable, alternative methods may be considered but a clean, sound and dry substrate must still result. in particular it is essential that the substrate does not suffer from conditions of rising damp. fosroc must approve any alternative preparations prior to commencement of work, as fosroc will not accept responsibility under any other condition. • isolation joint treatment: nitoseal pu50 single component, non sag, medium modulus, moisture cure, polyurethane hybrid joint sealant having properties shore a hardness 32, average peel strength 220n,elastic cover of 80% as per guidelines of en iso 7389, maf up to 50%. coving: providing & applying coving of size 75mmx75mm at wall & floor junctions after application of nitoprime 25 using nitoflor tf30 having compressive strength as per (bs6319 part 2) 75 n/mm2 flexural strength as per (bs6319 part 3) 26 n/mm2 tensile strength as per (bs6319 part 7) 13.5 n/mm2, abrasion resistance 3.0 mg/cycle bond strength to concrete 3.0 n/mm2.coving has to be coated with nitoflor fc150 high build, solvent free epoxy resin floor coating. priming: apply epoxy resin primer nitoprime 25 after mixing the base and hardener mechanical using a slow speed heavy duty drilling machine (300 400 rpm) fitted with a suitable paddle to achieve homogeneous mix and apply to prepared surface at a coverage rate of 5.5 to 6.5 sqm/lit. ø application of nitoflor eu5 (2mm): • nitoflor sl1000 flooring is supplied in four pre weighed packs (base, hardener, aggregate & colour pack) which are ready for immediate on site use. part mixing of these components is not acceptable and will affect both performance and appearance of the finished floor and would furthermore automatically invalidate fosroc’s standard product guarantee.• mixing should be carried out using either a forced action mixer; or a heavy duty, slow speed drill with proprietary mixing paddle attachment. fosroc should of a type and capacity approve all such equipment. the components should be mixed in a suitably sized mixing vessel.• add the entire contents of the colour pack into the base pack and mix for 15 30 seconds, until homogeneous.• empty the hardener pack into the mix of base and colour pack and mix until an even texture and colour is obtained.• thereafter, the contents of the graded aggregate pack should be slowly added and mixing carried out for a further 3 minutes until completely homogenous material is obtained.• application of nitoflor eu5 (laying):• the applicator should ensure that there are sufficient supplies of plant, labour and materials to make the mixing and subsequent application process a continuous one for any given, independent floor area.• once mixed, the material must be used within its specified pot life see ‘properties’ section of the relevant data sheet.• the material should be spread to a uniform thickness across the floor area using a squeegee or a notched trowel.• overcoating:• nitoflor eu5 will be ready for overcoating, using nitoflor sl 1000, after 48 hours from completion of application. application of nitoflor sl 1000 (1mm): • mixing nitoflor sl 1000: • nitoflor sl1000 flooring is supplied in four pre weighed packs (base, hardener, aggregate & colour pack) which are ready for immediate on site use. part mixing of these components is not acceptable and will affect both performance and appearance of the finished floor and would furthermore automatically invalidate fosroc’s standard product guarantee. • mixing should be carried out using either a forced action mixer; or a heavy duty, slow speed drill with proprietary mixing paddle attachment. fosroc should of a type and capacity approve all such equipment. the components should be mixed in a suitably sized mixing vessel. • add the entire contents of the colour pack into the base pack and mix for 15 30 seconds, until homogeneous. • empty the hardener pack into the mix of base and colour pack and mix until an even texture and colour is obtained. • thereafter, the contents of the graded aggregate pack should be slowly added and mixing carried out for a further 3 minutes until completely homogenous material is obtained • application (laying): • the applicator should ensure that there are sufficient supplies of plant, • once mixed, the material must be used within its specified pot life see “properties” section of the data sheet.labour and materials to make the mixing and subsequent application process a continuous one for any given, independent floor area. • the material should be poured onto the prepared and primed substrate as soon as mixing is complete. it should be spread to the required thickness using a serrated trowel; with care taken not to overwork the resin, spreading evenly and slowly. • immediately after laying, the material should be rolled, using a spiked nylon roller, to remove slight trowel marks, and to assist air release. the rolling should be carried out using a ‘back and forth’ technique along the same path. an overlap of 50% with adjacent paths is recommended. • further light rolling may be required to remove surface imperfections, or for subsequent release of trapped air, but should be carried out in accordance with the maximum times given below: note: any chemical/ product specified above of equivalent quality can be used. final finishing of floor must be as per the direction of engineer in charge. 38 26.43 providing and fixing internal wall panels on light gauge steel frame work with 12.5mm thick gypsum plaster board conforming is 2095:2011 fixed on cement board as per standard sizes fixed with self drilling / taping screws / fasteners @ 60cm c/c of approved make, screws shall be of counter sunk rib head of 1.60mm to 4 mm thick or 8 to 10 gauge of length varying from 25 to 45 mm. proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic based jointing compound for seamless finish.(cost of frame work to be paid for separately 26.43.1 cement fiber board 8 mm thick as per is 14862:2000 of type b (high pressure steam cured) 39 26.44 providing and fixing in all exterior face panels breathable vapour barrier underneath the cement fiber board as per national building code 2009 complete as per direction of engineer in charge. 40 12.62 x providing and fixing thermal insulation with resin bonded rock wool conforming to is: 8183, having density 48 kg/m3,50 mm thick,wrapped in 200 g virgin polythene bags fixed to wall wirh screw, rawel plug & washers and held and in position by criss cossing gi wire etc. complete as per directions of engineer in charge. 41 26.22 providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of size 595x595mm of approved texture, design and patterns as per cpwd specification 2019, to be laid in true horizontal level suspended on inter locking metal t grid of hot dipped galvanised iron section of 0.33mmthick (galvanized @ 120 grams per sqm including both sides)comprising of main t runners of size 24x38 mm of length 3000 mm,cross t of size 24x32 mm of length 1200 mm and secondaryintermediate cross t of size 24x32 mm of length 600mm to formgrid module of size 600 x 600 mm, suspended from ceiling usinggalvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and l shape level adjuster of size 76x25x25x1.6 mm fixed with grid and z cleat of size 25x37x25x1.6mm thick with precut hole on both 25mm flange to pierce into 12x50mm or even bigger size dash fastener if require,fixed with glavanised iron perimeter wall angle or size 24x24x0.40 mm of length 3000 mm to be fixed on periphey wall / partition with the help of plastic rawl plugs at 450mm center to center and 40 mm long dry wall s.s screws. the workshall be carried out as per specifications, drawing and as per directionsof the engineer in charge. 26.22.1 with 15 mm thick tegular edged light weight calcium silicate false ceiling tiles. 42 ar supplying and fixing rolling shuters of approved make. madeof required size of gi sheets interlocked together through theirentire length and jointed together at the end by end locksmounted on specially designed pipe shaft with brackets, sideguides and arragements for inside and outside locking withpush and pull operation complete including the cost ofproviding and fixing necessary 27.5cm long wire springsmanufactured from high tensile steel wire of adequatestrength conforming to is:4454 part1 and gi top cover ofrequired thickness for rolling shutters including providing andfixing ball bearing for rolling shutters ...
44448961 tender for supply of electrical materials 1 pvc conduit hms 25 mm pipes pvc electrical conduit pipes 25 mm (material polyvinyl chloride,pvc electrical conduit pipes meter 3000 2 pvc surface junction box 25 mm 3 way 25mm 3 way white pvc surface junction box heavy duty , water proof each 250 3 pvc c clip 20 mm c clip white pvc cable clip c clip 20 mm (material polyvinyl chloride) each 2500 4 pvc cclip 25 mm c clip white pvc cable clip c clip 25 mm (material polyvinyl chloride) each 10000 5 pvc c clip 32 mm c clip white pvc cable clip c clip 32 mm (material polyvinyl chloride) each 5000 6 pvc moduler box 3m 3 module pvc box 3 module ; abs material. high impact strength, uv stabilized material used. ; brass stud. brass stud given for easy mounting of plates ; batten & conduits. each 200 7 cover plate 3m 3 module pvc plate 3 module ; abs material. high impact strength, uv stabilized material used each 200 8 cover plate 6m 6 module pvc plate 6 module ; abs material. high impact strength, uv stabilized material used each 60 9 cover plate 8m 8 module pvc plate 8 module ; abs material. high impact strength, uv stabilized material used each 60 10 cover plate 12m 12 module pvc plate 12 module ; abs material. high impact strength, uv stabilized material used each 25 11 switch 6 amp one way current rating 6a, circuit type 1 way number of module 1m, color white switch type modular, power/voltage (v) 220 240 material polycarbonate 12 switch 16 amp 15/16 a switch (single module mechanisms, 1 module 22.5 x 45 mm, finger proof protection for ip 20 protection against accidental contact, captive never to loose screws, tunnel terminal preventing screwdrivers from slipping, laser marking on mechanisms. arrow showing the correct orientation of the mechanism, the latest is 3854:1997, fully shrouded internal mechanism under the rocker preventing visibility of sparks each 250 13 socket 6 amp current rating 5 a, power source electric pin type 5 pin, voltage 220v, color white material polycarbonate, phase single module 2 each 100 14 socket 16 amp 6 pin 15/16 a socket (two module mechanisms, 1 module 22.5 x 45 mm, finger proof protection for ip 20 protection against accidental contact, captive never to loose screws, tunnel terminal preventing screwdrivers from slipping, laser marking on mechanisms. arrow showing the correct orientation of the mechanism, the latest is 3854:1997, fully shrouded internal mechanism under the rocker preventing visibility of sparks,sockets are shuttered for childs safety against electric shocks. each 250 15 fan regulator power rating 450w fan speed step 4 step , 5 step each 100 16 ceiling rose typ box, color white, material plastic, usage/application electric fittingsdiameter 50 mmno. of pin 3 pin each 60 17 angle holder b 22 lamps voltage : 240 v, 50 hz base : white, poly carbonate, fire retardant,uv stabilized, pbt inner holder housing each 100 18 fan sheet cover as per is each 50 19 tpn db 6 way 06 way db 08 way ) as per iec 61439 3, suitable for flush mounting and surface mounting,with 100 a copper busbar for each phase,with 2 neutral bar, 2 earthbar and cable ties for cable management, fully insulated busbar & shrouded neutral bars, improved pan assembly for ease of installation prefitted masking sheet, reversible door for ip 43, with provision for fp 20 single pole mcb 2 amp single pole mcb 2 a to 32 a rating, 240/415 v, 10 ka, c curve, miniature circuit breaker. each 100 21 single pole mcb 6 amp single pole mcb 5 a to 32 a rating, 240/415 v, 10 ka, c curve, miniature circuit breaker. each 60 22 single pole mcb 16 amp single pole mcb 5 a to 32 a rating, 240/415 v, 10 ka, c curve, miniature circuit breaker. each 60 23 single pole mcb 32 amp single pole mcb 5 a to 32 a rating, 240/415 v, 10 ka, c curve, miniature circuit breaker. each 150 24 double pole 63 amp elcb rated current 63a, no. of poles double pole voltage 240v, sensitivity 30ma frequency 50hz, certification is certified phase single, breaking capacity 10 k tripping time 0.5 sec each 25 25 double pole 40 amp elcb rated current 40a no. of poles double pole voltage 220v sensitivity 100ma, frequency 50hz certification is certified, phase single phase breaking capacity 10 k, tripping time 0.5 sec each 25 26 double pole 25 amp elcb rated current 25a, no. of poles double pole voltage 220v, sensitivity 30ma frequency 50hz, certification is certified phase single phase, breaking capacity 10 k tripping time 0.5 sec each 25 27 four pole mcb 63 amp no.of poles four pole, rated current 63a brand standrad, frequency 50 hz voltage 240v, weight 115 g each 32 28 lug pin type 1.5 sqmm 1.5 sqmm pine type pvc insulation for added safety and protection against electrical shock. high pull out strength to ensure a secure and reliable connection. 29 lug pin type 2.5 sqmm 2.5 sqmm pine type pvc insulation for added safety and protection against electrical shock. high pull out strength to ensure a secure and reliable connection. each 2000 30 lug pin type 4 sqmm 4 sqmm pine type pvc insulation for added safety and protection against electrical shock. high pull out strength to ensure a secure and reliable connection. each 2000 31 lug pin type 6 sqmm 6 sqmm pine type pvc insulation for added safety and protection against electrical shock. high pull out strength to ensure a secure and reliable connection. each 2000 32 lug pin type 16 sqmm 16 sqmm pine type pvc insulation for added safety and protection against electrical shock. high pull out strength to ensure a secure and reliable connection. each 2000 33 lug ring type 16 sqmm 16 sqmm ring type pvc insulation for added safety and protection against electrical shock. high pull out strength to ensure a secure and reliable connection. each 2000 34 frlsh wire 1 sqmm red insulated copper wire 1 sq. mm single core. wires should be made with the highest grade electroclytic copper & incorporate voltages upto 1100v, compliant with flame stop insulation technology, keeping safe from electrical accidents and fire emergencies. it should be ideal for wiring in closed confined spaces and applications that require high flexibility. suited for both indoor and outdoor installation in applications that require working high purity copper high flexibility for easy installation. it should be rohs/reach compliant. meter 2000 35 frlsh wire 1 sqmm black insulated copper wire 1 sq. mm single core. wires should be made with the highest grade electroclytic copper & incorporate voltages upto 1100v, compliant with flame stop insulation technology, keeping safe from electrical accidents and fire emergencies. it should be ideal for wiring in closed confined spaces and applications that require high flexibility. suited for both indoor and outdoor installation in applications that require working high purity copper high flexibility for easy installation. it should be rohs/reach compliant. 36 frlsh wire 2.5 sqmm red insulated copper wire 2.5 sq. mm single core. wires should be made with the highest grade electroclytic copper & incorporate voltages upto 1100v, compliant with flame stop insulation technology, keeping safe from electrical accidents and fire emergencies. it should be ideal for wiring in closed confined spaces and applications that require high flexibility. suited for both indoor and outdoor installation in applications that require working high purity copper high flexibility for easy installation. it should be rohs/reach compliant. meter 2000 37 frlsh wire 2.5 sqmm black insulated copper wire 2.5 sq. mm single core. wires should be made with the highest grade electroclytic copper & incorporate voltages upto 1100v, compliant with flame stop insulation technology, keeping safe from electrical accidents and fire emergencies. it should be ideal for wiring in closed confined spaces and applications that require high flexibility. suited for both indoor and outdoor installation in applications that require working high purity copper high flexibility for easy installation. it should be rohs/reach compliant. meter 2000 38 frlsh wire 4 sqmm red insulated copper wire 4 sq. mm single core. wires should be made with the highest grade electroclytic copper & incorporate voltages upto 1100v, compliant with flame stop insulation technology, keeping safe from electrical accidents and fire emergencies. it should be ideal for wiring in closed confined spaces and applications that require high flexibility. suited for both indoor and outdoor installation in applications that require working high purity copper high flexibility for easy installation. it should be rohs/reach compliant. 39 frlsh wire 4 sqmm black insulated copper wire 4 sq. mm single core. wires should be made with the highest grade electroclytic copper & incorporate voltages upto 1100v, compliant with flame stop insulation technology, keeping safe from electrical accidents and fire emergencies. it should be ideal for wiring in closed confined spaces and applications that require high flexibility. suited for both indoor and outdoor installation in applications that require working high purity copper high flexibility for easy installation. it should be rohs/reach compliant. meter 2200 40 frlsh wire 4 sqmm green insulated copper wire 4 sq. mm single core. wires should be made with the highest grade electroclytic copper & incorporate voltages upto 1100v, compliant with flame stop insulation technology, keeping safe from electrical accidents and fire emergencies. it should be ideal for wiring in closed confined spaces and applications that require high flexibility. suited for both indoor and outdoor installation in applications that require working high purity copper high flexibility for easy installation. it should be rohs/reach compliant. meter 2200 41 frlsh cable 4 core 16 sqmm insulated coppercable 16 sq mm 05 core should be made with the highest grade electroclytic copper & incorporate voltages upto 1100v, compliant with flame stop insulation technology, keeping safe from electrical accidents and fire emergencies. it should be ideal for wiring in closed confined spaces and applications that require high flexibility. suited for both indoor and outdoor installation in applications that require working high purity copper high flexibility for easy installation. it should be rohs/reach compliant. meter 200 42 frlsh flat submersible cable 3 core 2.5 sqmm cross sectional area 2.5 sq. mm, number of core 3 core, power 1000 w, voltage 480 v, usage submersible wirring, material copper meter 150 43 pvc tape red pvc tape (polyvinyl chloride (pvc) and/or its copolymers and has a rubberbased, pressure sensitive adhesive. the tape sha 44 pvc tape yellow pvc tape (polyvinyl chloride (pvc) and/or its copolymers and has a rubberbased, pressure sensitive adhesive. the tape shall be 0.178mm thick) (r,y,b,black, g) each 200 45 pvc tape blue pvc tape (polyvinyl chloride (pvc) and/or its copolymers and has a rubberbased, pressure sensitive adhesive. the tape shall be 0.178mm thick) (r,y,b,black, g) each 200 46 pvc tape green pvc tape (polyvinyl chloride (pvc) and/or its copolymers and has a rubberbased, pressure sensitive adhesive. the tape shall be 0.178mm thick) (r,y,b,black, g) each 200 47 pvc tape black pvc tape (polyvinyl chloride (pvc) and/or its copolymers and has a rubberbased, pressure sensitive adhesive. the tape shall be 0.178mm thick) (r,y,b,black, g) each 200 48 cu. plate 600x600x3 mm earth plate length x width: 600mm x 600mm height: 3.0mm surface area: 0.73sqmm unit weight: 9.60kg as per is each 8 49 cu. strip 32x6 mm earthing strips, size 32 x 6 material copper as per is meter 250 50 gypsum screw 1 screw 1 (length 1 , mild still, black) as per is each 2000 51 gypsum screw 2 screw 2 (length 2 , mild still, black) as per is each 2000 52 8 mm anchor fasteners 8 mm anchor fasteners (size: 8 mm, total length 6 cm, very easy to use, just drill the pilot hole direct into material and substrate, suitable for a variety of substrates concrete, solid, perforated or hollow bricks, natural stone, marble etc.) each 150 53 pvc flexible pipe size 20 mm flexble pipe (fire resistance. high flexibility. higher working temperature. technical data : from : 16mm to 25 mm (tolerence in sizes) ± 0.40 mm. from : 32 mm to 50) meter 2500 54 pvc flexible pipe size 32 mm flexble pipe (fire resistance. high flexibility. higher working temperature. technical data : from : 30 to 32 mm (tolerence in sizes) ± 0.40 mm. from : 32 mm to 50) meter 2500 55 16 no. gi wire wire gauge 16 swg, material galvanized iron rust proof yes, color silver 56 tube light 20 watt wattage 36w, light color cool daylight color temperature 6500k, material polycarbonate beam angle 120 degree, lumens 3600 lm length 120 cm, class of protection class i each 150 57 bulb 12 watt led color white, bulb base b22, wattage 12wcolor temperature 6500k, lumen output 1200lminput voltage 220v 240v, style modernshape round, special feature energy efficientpower source ac, body material polycarbonateproduct dimensions 11 x 6 x 6 cmlight source type led each 250 58 16 amp 3 pin top 16 a top (heavy duty, nickel plated ass terminals, for higher conductivity. rating, rated 16 a / 250 v ac 50 hz / 3000 w ...) each 70 59 1.5 hp submersible (water sealed) pump with starter pump 100 mm borewell submersible pump set, water filled submersible pump, suitable for : 100 mm boring power 1.5 hp, head range 111 12 m , stage 15 starter power 1.5 hp, phase three phase voltage 240 380 v, frequency 50 hz...
44448266 tender for supply of electrical material => limited; 1 pvc conduit hms 25 mm pipes pvc electrical conduit pipes 25 mm (material polyvinyl chloride,pvc electrical conduit pipes meter 3000 2 pvc surface junction box 25 mm 3 way 25mm 3 way white pvc surface junction box heavy duty , water proof each 250 3 pvc c clip 20 mm c clip white pvc cable clip c clip 20 mm (material polyvinyl chloride) each 2500 4 pvc cclip 25 mm c clip white pvc cable clip c clip 25 mm (material polyvinyl chloride) each 10000 5 pvc c clip 32 mm c clip white pvc cable clip c clip 32 mm (material polyvinyl chloride) each 5000 6 pvc moduler box 3m 3 module pvc box 3 module ; abs material. high impact strength, uv stabilized material used. ; brass stud. brass stud given for easy mounting of plates ; batten & conduits. each 200 7 cover plate 3m 3 module pvc plate 3 module ; abs material. high impact strength, uv stabilized material used each 200 8 cover plate 6m 6 module pvc plate 6 module ; abs material. high impact strength, uv stabilized material used each 60 9 cover plate 8m 8 module pvc plate 8 module ; abs material. high impact strength, uv stabilized material used each 60 10 cover plate12m 12 module pvc plate 12 module ; abs material. high impact strength, uv stabilized material used each 25 11 switch 6 amp one way current rating 6a, circuit type 1 way number of module 1m, color white switch type modular, power/voltage (v) 220 240 material polycarbonate each 100 12 switch 16 amp 15/16 a switch (single module mechanisms, 1 module 22.5 x 45 mm, finger proof protection for ip 20 protection against accidental contact, captive never to loose screws, tunnel terminal preventing screwdrivers from slipping, laser marking on mechanisms. arrow showing the correct orientation of the mechanism, the latest is 3854:1997, fully shrouded internal mechanism under the rocker preventing visibility of sparks each 250 13 socket 6 amp current rating 5 a, power source electric pin type 5 pin, voltage 220v, color white material polycarbonate, phase single module 2 each 100 14 socket 16 amp 6 pin 15/16 a socket (two module mechanisms, 1 module 22.5 x 45 mm, finger proof protection for ip 20 protection against accidental contact, captive never to loose screws, tunnel terminal preventing screwdrivers from slipping, laser marking on mechanisms. arrow showing the correct orientation of the mechanism, the latest is 3854:1997, fully shrouded internal mechanism under the rocker preventing visibility of sparks,sockets are shuttered for childs safety against electric shocks. each 250 15 fan regulator power rating 450w fan speed step 4 step , 5 step each 100 16 ceiling rose typ box, color white, material plastic, usage/application electric fittingsdiameter 50 mmno. of pin 3 pin each 60 17 angle holder b 22 lamps voltage : 240 v, 50 hz base : white, poly carbonate, fire retardant,uv stabilized, pbt inner holder housing each 100 18 fan sheet cover as per is each 50 19 tpn db 6 way 06 way db 08 way ) as per iec 61439 3, suitable for flush mounting and surface mounting,with 100 a copper busbar for each phase,with 2 neutral bar, 2 earthbar and cable ties for cable management, fully insulated busbar & shrouded neutral bars, improved pan assembly for ease of installation prefitted masking sheet, reversible door for ip 43, with provision for fp each 30 mcb/isolator/rccb/rcbo as incomer and sp/tp mcbs as outgoing 20 single pole mcb 2 amp single pole mcb 2 a to 32 a rating, 240/415 v, 10 ka, c curve, miniature circuit breaker. each 100 21 single pole mcb 6 amp single pole mcb 5 a to 32 a rating, 240/415 v, 10 ka, c curve, miniature circuit breaker. each 60 22 single pole mcb 16 amp single pole mcb 5 a to 32 a rating, 240/415 v, 10 ka, c curve, miniature circuit breaker. each 60 23 single pole mcb 32 amp single pole mcb 5 a to 32 a rating, 240/415 v, 10 ka, c curve, miniature circuit breaker. each 150 24 double pole 63 amp elcb rated current 63a, no. of poles double pole voltage 240v, sensitivity 30ma frequency 50hz, certification is certified phase single, breaking capacity 10 k tripping time 0.5 sec each 25 25 double pole 40 amp elcb rated current 40a no. of poles double pole voltage 220v sensitivity 100ma, frequency 50hz certification is certified, phase single phase breaking capacity 10 k, tripping time 0.5 sec each 25 26 double pole 25 amp elcb rated current 25a, no. of poles double pole voltage 220v, sensitivity 30ma frequency 50hz, certification is certified phase single phase, breaking capacity 10 k tripping time 0.5 sec each 25 27 four pole mcb 63 amp no.of poles four pole, rated current 63a brand standrad, frequency 50 hz voltage 240v, weight 115 g each 32 28 lug pin type 1.5 sqmm 1.5 sqmm pine type pvc insulation for added safety and protection against electrical shock. high pull out strength to ensure a secure and reliable connection. each 2000 29 lug pin type 2.5 sqmm 2.5 sqmm pine type pvc insulation for added safety and protection against electrical shock. high pull out strength to ensure a secure and reliable connection. each 2000 30 lug pin type 4 sqmm 4 sqmm pine type pvc insulation for added safety and protection against electrical shock. high pull out strength to ensure a secure and reliable connection. each 2000 31 lug pin type 6 sqmm 6 sqmm pine type pvc insulation for added safety and protection against electrical shock. high pull out strength to ensure a secure and reliable connection. each 2000 32 lug pin type 16 sqmm 16 sqmm pine type pvc insulation for added safety and protection against electrical shock. high pull out strength to ensure a secure and reliable connection. each 2000 33 lug ring type16 sqmm 16 sqmm ring type pvc insulation for added safety and protection against electrical shock. high pull out strength to ensure a secure and reliable connection. each 2000 34 frlsh wire 1 sqmm red insulated copper wire 1 sq. mm single core. wires should be made with the highest grade electroclytic copper & incorporate voltages upto 1100v, compliant with flame stop insulation technology, keeping safe from electrical accidents and fire emergencies. it should be ideal for wiring in closed confined spaces and applications that require high flexibility. suited for both indoor and outdoor installation in applications that require working high purity copper high flexibility for easy installation. it should be rohs/reach compliant. meter 2000 35 frlsh wire 1 sqmm black insulated copper wire 1 sq. mm single core. wires should be made with the highest grade electroclytic copper & incorporate voltages upto 1100v, compliant with flame stop insulation technology, keeping safe from electrical accidents and fire emergencies. it should be ideal for wiring in closed confined spaces and applications that require high flexibility. suited for both indoor and outdoor installation in applications that require working high purity copper high flexibility for easy installation. it should be rohs/reach compliant. meter 2000 36 frlsh wire 2.5 sqmm red insulated copper wire 2.5 sq. mm single core. wires should be made with the highest grade electroclytic copper & incorporate voltages upto 1100v, compliant with flame stop insulation technology, keeping safe from electrical accidents and fire emergencies. it should be ideal for wiring in closed confined spaces and applications that require high flexibility. suited for both indoor and outdoor installation in applications that require working high purity copper high flexibility for easy installation. it should be rohs/reach compliant. meter 2000 37 frlsh wire 2.5 sqmm black insulated copper wire 2.5 sq. mm single core. wires should be made with the highest grade electroclytic copper & incorporate voltages upto 1100v, compliant with flame stop insulation technology, keeping safe from electrical accidents and fire emergencies. it should be ideal for wiring in closed confined spaces and applications that require high flexibility. suited for both indoor and outdoor installation in applications that require working high purity copper high flexibility for easy installation. it should be rohs/reach compliant. meter 2000 38 frlsh wire 4 sqmm red insulated copper wire 4 sq. mm single core. wires should be made with the highest grade electroclytic copper & incorporate voltages upto 1100v, compliant with flame stop insulation technology, keeping safe from electrical accidents and fire emergencies. it should be ideal for wiring in closed confined spaces and applications that require high flexibility. suited for both indoor and outdoor installation in applications that require working high purity copper high flexibility for easy installation. it should be rohs/reach compliant. meter 2200 39 frlsh wire 4 sqmm black insulated copper wire 4 sq. mm single core. wires should be made with the highest grade electroclytic copper & incorporate voltages upto 1100v, compliant with flame stop insulation technology, keeping safe from electrical accidents and fire emergencies. it should be ideal for wiring in closed confined spaces and applications that require high flexibility. suited for both indoor and outdoor installation in applications that require working high purity copper high flexibility for easy installation. it should be rohs/reach compliant. meter 2200 40 frlsh wire 4 sqmm green insulated copper wire 4 sq. mm single core. wires should be made with the highest grade electroclytic copper & incorporate voltages upto 1100v, compliant with flame stop insulation technology, keeping safe from electrical accidents and fire emergencies. it should be ideal for wiring in closed confined spaces and applications that require high flexibility. suited for both indoor and outdoor installation in applications that require working high purity copper high flexibility for easy installation. it should be rohs/reach compliant. meter 2200 41 frlsh cable 4 core 16 sqmm insulated coppercable 16 sq mm 05 core should be made with the highest grade electroclytic copper & incorporate voltages upto 1100v, compliant with flame stop insulation technology, keeping safe from electrical accidents and fire emergencies. it should be ideal for wiring in closed confined spaces and applications that require high flexibility. suited for both indoor and outdoor installation in applications that require working high purity copper high flexibility for easy installation. it should be rohs/reach compliant. meter 200 42 frlsh flat submersible cable 3 core 2.5 sqmm cross sectional area 2.5 sq. mm, number of core 3 core, power 1000 w, voltage 480 v, usage submersible wirring, material copper meter 150 43 pvc tape red pvc tape (polyvinyl chloride (pvc) and/or its copolymers and has a rubberbased, pressure sensitive adhesive. the tape shall be 0.178mm thick) (r,y,b,black, g) each 200 44 pvc tapeyellow pvc tape (polyvinyl chloride (pvc) and/or its copolymers and has a rubberbased, pressure sensitive adhesive. the tape shall be 0.178mm thick) (r,y,b,black, g) each 200 45 pvc tape blue pvc tape (polyvinyl chloride (pvc) and/or its copolymers and has a rubberbased, pressure sensitive adhesive. the tape shall be 0.178mm thick) (r,y,b,black, g) each 200 46 pvc tapegreen pvc tape (polyvinyl chloride (pvc) and/or its copolymers and has a rubberbased, pressure sensitive adhesive. the tape shall be 0.178mm thick) (r,y,b,black, g) each 200 47 pvc tape black pvc tape (polyvinyl chloride (pvc) and/or its copolymers and has a rubberbased, pressure sensitive adhesive. the tape shall be 0.178mm thick) (r,y,b,black, g) each 200 48 cu. plate600x600x3 mm earth plate length x width: 600mm x 600mm height: 3.0mm surface area: 0.73sqmm unit weight: 9.60kg as per is each 8 49 cu. strip 32x6 mm earthing strips, size 32 x 6 material copper as per is meter 250 50 gypsum screw 1 screw 1 (length 1 , mild still, black) as per is each 2000 51 gypsum screw 2 screw 2 (length 2 , mild still, black) as per is each 2000 52 8 mm anchor fasteners 8 mm anchor fasteners (size: 8 mm, total length 6 cm, very easy to use, just drill the pilot hole direct into material and substrate, suitable for a variety of substrates concrete, solid, perforated or hollow bricks, natural stone, marble etc.) each 150 53 pvc flexible pipe size 20 mm flexble pipe (fire resistance. high flexibility. higher working temperature. technical data : from : 16mm to 25 mm (tolerence in sizes) ± 0.40 mm. from : 32 mm to 50) meter 2500 54 pvc flexible pipe size 32 mm flexble pipe (fire resistance. high flexibility. higher working temperature. technical data : from : 30 to 32 mm (tolerence in sizes) ± 0.40 mm. from : 32 mm to 50) meter 2500 55 16 no. gi wire wire gauge 16 swg, material galvanized iron rust proof yes, color silver kg 10 56 tube light 20 watt wattage 36w, light color cool daylight color temperature 6500k, material polycarbonate beam angle 120 degree, lumens 3600 lm length 120 cm, class of protection class i each 150 57 bulb 12 watt led color white, bulb base b22, wattage 12wcolor temperature 6500k, lumen output 1200lminput voltage 220v 240v, style modernshape round, special feature energy efficientpower source ac, body material polycarbonateproduct dimensions 11 x 6 x 6 cmlight source type led each 250 58 16 amp 3 pin top 16 a top (heavy duty, nickel plated ass terminals, for higher conductivity. rating, rated 16 a / 250 v ac 50 hz / 3000 w ...) each 70 59 1.5 hp submersible (water sealed) pump with starter pump 100 mm borewell submersible pump set, water filled submersible pump, suitable for : 100 mm boring power 1.5 hp, head range 111 12 m , stage 15 starter power 1.5 hp, phase three phase voltage 240 380 v, frequency 50 hz each 1...
44237284 bids are invited for electrical,accessories item name : earthing wire material : galvanized iron dimension : 14 swg as per is 208 2006; zinc coating for gi wire as per is 4826 1979 latest editionstotal quantity : 3002...
43872679 supply of sand, stone chips black, fly ash brick, tmt bars rod, saal wood, geo bags, gi wire/chain link wire mesh....
43500044 supply of gi wire size 8 swg as per is: 4826/1979gi wire size 8 swg as per is: 4826/1979,gi wire size 8 swg as per is: 4826/1979 .make tata/jindal/standard or similar. [ warranty period: 30 months after the date of delivery ]...
43345830 bids are invited for ductable ac in cgmt cell supply of ductable ac , itc of ductable ac , extra copper pipe , ducting , aluminium grills , volume control damper , canvass , power cable , electrical control , pvc pipe , flexible pvc pipe , gi wire total quantity : 420...
43209071 auction sale of lot no: 02 lot name: empty body of transformer of different rating, gi wire and other misc iron...
42616388 selection of agency for supply of ( food grains ) for daily use for prisoners. sub jail udakishunganj. strong tomato okra sweet gourd jingli eggplant bitter gourd pumpkin red greens kadima cucumber lemon spinach greens ( remove the roots ) save ripe banana orange mango grape pomegranate pear raw papaya jackfruit watermelon melon cauliflower cabbage. seam tomato spinach greens eggplant radish pumpkin kadima cucumber jackfruit bitter gourd vince lemon save ripe banana orange guava grape pomegranate pear raw papaya dattavan ( of neem or acacia ) ildi cumin dried garlic round chilli dried red chilli coriander ginger mustard seeds gram flour iodized salt refine vermicelli cheese curd soybean bari fine flour semolina pea hot torch roasted gram gram sattu arva rice ( for kheer ) wheat grinding hens egg clean and cut chicken meat milk mustard oil ( kachhi ghani ) agmark cleaning and cutting fish rehu or catla potato milk powder chickpea chuddha sprouted gram ( salt mixed with lemon ) sprouted moong ( salt mixed with lemon ) firewood bread onion payup voucher file fly leaf flat file index file register 2 jista register 3 jista register 4 jista register 5 jista carbon tag bunch tea pepper peen gum 700 ml fevi stick camel ball pen red, black, blue reynolds trimape ( kytener ) pilate pen permanent marker stamp tree stamp eek computer paper a4 size century star xerox b1022 multifunction lasserjet cartridge hp printer laserjet p1566 cartridge hp printer inkjet ईक hp printer laserjet pro mfp m429fdn cartridge cartridge refilling cd cassette mouse usb cello tape stapler peen dvd cassette that someone stapler peen medium punching machine colorful flag incense sticks clay pot clay pot lid clay pot bud picked ramras soil ocher soil empty bin ( five kg plastic ) empty bin ( 15 kg plastic ) coconut broom coconut rope gi wire twine bamboo soup bamboo basket bleaching powder veem powder drain brush asiddha bottle 500 ml palm fan electrical wire copper 3 / 20 electrical wire copper 7 / 20 electrical wire copper 23 / 78 electrical wire copper 1mm electrical wire copper 2mm electrical wire copper 4mm lightning holder power switch extension board wiring board 8 / 12 wiring board 8 / 10 wiring pipe. ech wiring pipe 1 / 2 inch power plug 5 amps power socket 5 amps power plug 15 amps power socket 15 amps mcb 16 ampere mcb 32 amps led bulb 09 watt led bulb 13 watt led bulb 27 watt led bulb 30 watt flashlight battery k1050 torch bulb new torch eveready 02 sale new torch eveready 03 sale hand pump head hand pump hand pump plate hand pump head hand pump plunger hand pump washer hand pump rod handpiece rod socket handpiece nutbolt hand pump cylinder handpiece cylinder socket hand pump head waist hand pump loot hand washer plate washer hand pump flancha radisson of handpumps handpiece grate sulation safeda link lock 65 link lock 70 condenser 315 condenser 4 johnson babysoap 100g baby powder ( branded ) baby mosquito net coconut oil 50 ml coconut oil in kg sanitary ware cotton petticoat cotton blouse cotton saree salwar suit woolen cloth for one to three year old child normal clothes for a child of one to three years woolen cloth for a child of three to six years normal clothes for a child of three to six years steel plate 12 inch steel bowl 5 inch steel spoon abeer lifebuoy soap 100 grams colored paper flag gate paint ( branded ) paint brush 1 inch paint brush 2 inch paint brush 4 inch thickener 500 ml matchbox phenyl tablet a4 size envelope main switch envelope extended envelope small jute bag with karas name engraved on it caustic soap phenyl 1000 ml badha bath soap ( 100gm ) branded laundry soap ( 80 gm ) surf powder ( 75 gm ) branded surf powder ( 500 gm ) branded surf powder ( 500gm ) branded surf powder ( 1000 gm ) branded creme biscuit ( 60 gm ) branded cream biscuit ( 45 gm ) branded namkeen biscuits ( 300 gm ) branded sweet biscuit ( 300 gm ) thatandakamak namkeen mujiya ( 32 gm ) branded namkeen bhujia ( 400 gm ) branded potato chips ( 24 gm ) branded fssai mustard oil ( 70 ml ) branded toothpaste ( 21 gm ) branded branded shampoo ( 6ml ) tooth brush increased size branded tongue cleaner plastic glucose ( 200 gm ) branded chyavanprash ( 500 gm ) branded neel ujala ( 75 ml ) branded dental shine ( 45 ml ) branded toothpaste ( 45 ml ) branded moong dal ( 30 gm ) branded gulab jamun ( 500 gm ) branded peda ( 100 gm ) branded fssai rabdi ( 80 gm ) branded fssai chilled oil ( 50 ml ) branded ludo ( including goti ) branded vaseline ( 5.5 gm ) branded facewash ( 50ml ) branded sonapapadi ( 500 gm ) branded mineral water ( bisleri / kinley ) ...
42616381 selection of agency for supply of ( food grains ) for daily use for prisoners. sub jail udakishunganj. strong tomato okra sweet gourd jingli eggplant bitter gourd pumpkin red greens kadima cucumber lemon spinach greens ( remove the roots ) save ripe banana orange mango grape pomegranate pear raw papaya jackfruit watermelon melon cauliflower cabbage. seam tomato spinach greens eggplant radish pumpkin kadima cucumber jackfruit bitter gourd vince lemon save ripe banana orange guava grape pomegranate pear raw papaya dattavan ( of neem or acacia ) ildi cumin dried garlic round chilli dried red chilli coriander ginger mustard seeds gram flour iodized salt refine vermicelli cheese curd soybean bari fine flour semolina pea hot torch roasted gram gram sattu arva rice ( for kheer ) wheat grinding hens egg clean and cut chicken meat milk mustard oil ( kachhi ghani ) agmark cleaning and cutting fish rehu or catla potato milk powder chickpea chuddha sprouted gram ( salt mixed with lemon ) sprouted moong ( salt mixed with lemon ) firewood bread onion payup voucher file fly leaf flat file index file register 2 jista register 3 jista register 4 jista register 5 jista carbon tag bunch tea pepper peen gum 700 ml fevi stick camel ball pen red, black, blue reynolds trimape ( kytener ) pilate pen permanent marker stamp tree stamp eek computer paper a4 size century star xerox b1022 multifunction lasserjet cartridge hp printer laserjet p1566 cartridge hp printer inkjet ईक hp printer laserjet pro mfp m429fdn cartridge cartridge refilling cd cassette mouse usb cello tape stapler peen dvd cassette that someone stapler peen medium punching machine colorful flag incense sticks clay pot clay pot lid clay pot bud picked ramras soil ocher soil empty bin ( five kg plastic ) empty bin ( 15 kg plastic ) coconut broom coconut rope gi wire twine bamboo soup bamboo basket bleaching powder veem powder drain brush asiddha bottle 500 ml palm fan electrical wire copper 3 / 20 electrical wire copper 7 / 20 electrical wire copper 23 / 78 electrical wire copper 1mm electrical wire copper 2mm electrical wire copper 4mm lightning holder power switch extension board wiring board 8 / 12 wiring board 8 / 10 wiring pipe. ech wiring pipe 1 / 2 inch power plug 5 amps power socket 5 amps power plug 15 amps power socket 15 amps mcb 16 ampere mcb 32 amps led bulb 09 watt led bulb 13 watt led bulb 27 watt led bulb 30 watt flashlight battery k1050 torch bulb new torch eveready 02 sale new torch eveready 03 sale hand pump head hand pump hand pump plate hand pump head hand pump plunger hand pump washer hand pump rod handpiece rod socket handpiece nutbolt hand pump cylinder handpiece cylinder socket hand pump head waist hand pump loot hand washer plate washer hand pump flancha radisson of handpumps handpiece grate sulation safeda link lock 65 link lock 70 condenser 315 condenser 4 johnson babysoap 100g baby powder ( branded ) baby mosquito net coconut oil 50 ml coconut oil in kg sanitary ware cotton petticoat cotton blouse cotton saree salwar suit woolen cloth for one to three year old child normal clothes for a child of one to three years woolen cloth for a child of three to six years normal clothes for a child of three to six years steel plate 12 inch steel bowl 5 inch steel spoon abeer lifebuoy soap 100 grams colored paper flag gate paint ( branded ) paint brush 1 inch paint brush 2 inch paint brush 4 inch thickener 500 ml matchbox phenyl tablet a4 size envelope main switch envelope extended envelope small jute bag with karas name engraved on it caustic soap phenyl 1000 ml badha bath soap ( 100gm ) branded laundry soap ( 80 gm ) surf powder ( 75 gm ) branded surf powder ( 500 gm ) branded surf powder ( 500gm ) branded surf powder ( 1000 gm ) branded creme biscuit ( 60 gm ) branded cream biscuit ( 45 gm ) branded namkeen biscuits ( 300 gm ) branded sweet biscuit ( 300 gm ) thatandakamak namkeen mujiya ( 32 gm ) branded namkeen bhujia ( 400 gm ) branded potato chips ( 24 gm ) branded fssai mustard oil ( 70 ml ) branded toothpaste ( 21 gm ) branded branded shampoo ( 6ml ) tooth brush increased size branded tongue cleaner plastic glucose ( 200 gm ) branded chyavanprash ( 500 gm ) branded neel ujala ( 75 ml ) branded dental shine ( 45 ml ) branded toothpaste ( 45 ml ) branded moong dal ( 30 gm ) branded gulab jamun ( 500 gm ) branded peda ( 100 gm ) branded fssai rabdi ( 80 gm ) branded fssai chilled oil ( 50 ml ) branded ludo ( including goti ) branded vaseline ( 5.5 gm ) branded facewash ( 50ml ) branded sonapapadi ( 500 gm ) branded mineral water ( bisleri / kinley ) ...
42616377 selection of agency for supply of (food grains) for daily use for prisoners. district jail madhepura. strong tomato okra sweet gourd jingli eggplant bitter gourd pumpkin red greens kadima cucumber lemon spinach greens ( remove the roots ) save ripe banana orange mango grape pomegranate pear raw papaya jackfruit watermelon melon cauliflower cabbage. seam tomato spinach greens eggplant radish pumpkin kadima cucumber jackfruit bitter gourd vince lemon save ripe banana orange guava grape pomegranate pear raw papaya dattavan ( of neem or acacia ) ildi cumin dried garlic round chilli dried red chilli coriander ginger mustard seeds gram flour iodized salt refine vermicelli cheese curd soybean bari fine flour semolina pea hot torch roasted gram gram sattu arva rice ( for kheer ) wheat grinding hens egg clean and cut chicken meat milk mustard oil ( kachhi ghani ) agmark cleaning and cutting fish rehu or catla potato milk powder chickpea chuddha sprouted gram ( salt mixed with lemon ) sprouted moong ( salt mixed with lemon ) firewood bread onion payup voucher file fly leaf flat file index file register 2 jista register 3 jista register 4 jista register 5 jista carbon tag bunch tea pepper peen gum 700 ml fevi stick camel ball pen red, black, blue reynolds trimape ( kytener ) pilate pen permanent marker stamp tree stamp eek computer paper a4 size century star xerox b1022 multifunction lasserjet cartridge hp printer laserjet p1566 cartridge hp printer inkjet ईक hp printer laserjet pro mfp m429fdn cartridge cartridge refilling cd cassette mouse usb cello tape stapler peen dvd cassette that someone stapler peen medium punching machine colorful flag incense sticks clay pot clay pot lid clay pot bud picked ramras soil ocher soil empty bin ( five kg plastic ) empty bin ( 15 kg plastic ) coconut broom coconut rope gi wire twine bamboo soup bamboo basket bleaching powder veem powder drain brush asiddha bottle 500 ml palm fan electrical wire copper 3 / 20 electrical wire copper 7 / 20 electrical wire copper 23 / 78 electrical wire copper 1mm electrical wire copper 2mm electrical wire copper 4mm lightning holder power switch extension board wiring board 8 / 12 wiring board 8 / 10 wiring pipe. ech wiring pipe 1 / 2 inch power plug 5 amps power socket 5 amps power plug 15 amps power socket 15 amps mcb 16 ampere mcb 32 amps led bulb 09 watt led bulb 13 watt led bulb 27 watt led bulb 30 watt flashlight battery k1050 torch bulb new torch eveready 02 sale new torch eveready 03 sale hand pump head hand pump hand pump plate hand pump head hand pump plunger hand pump washer hand pump rod handpiece rod socket handpiece nutbolt hand pump cylinder handpiece cylinder socket hand pump head waist hand pump loot hand washer plate washer hand pump flancha radisson of handpumps handpiece grate sulation safeda link lock 65 link lock 70 condenser 315 condenser 4 johnson babysoap 100g baby powder ( branded ) baby mosquito net coconut oil 50 ml coconut oil in kg sanitary ware cotton petticoat cotton blouse cotton saree salwar suit woolen cloth for one to three year old child normal clothes for a child of one to three years woolen cloth for a child of three to six years normal clothes for a child of three to six years steel plate 12 inch steel bowl 5 inch steel spoon abeer lifebuoy soap 100 grams colored paper flag gate paint ( branded ) paint brush 1 inch paint brush 2 inch paint brush 4 inch thickener 500 ml matchbox phenyl tablet a4 size envelope main switch envelope extended envelope small jute bag with karas name engraved on it caustic soap phenyl 1000 ml badha bath soap ( 100gm ) branded laundry soap ( 80 gm ) surf powder ( 75 gm ) branded surf powder ( 500 gm ) branded surf powder ( 500gm ) branded surf powder ( 1000 gm ) branded creme biscuit ( 60 gm ) branded cream biscuit ( 45 gm ) branded namkeen biscuits ( 300 gm ) branded sweet biscuit ( 300 gm ) thatandakamak namkeen mujiya ( 32 gm ) branded namkeen bhujia ( 400 gm ) branded potato chips ( 24 gm ) branded fssai mustard oil ( 70 ml ) branded toothpaste ( 21 gm ) branded branded shampoo ( 6ml ) tooth brush increased size branded tongue cleaner plastic glucose ( 200 gm ) branded chyavanprash ( 500 gm ) branded neel ujala ( 75 ml ) branded dental shine ( 45 ml ) branded toothpaste ( 45 ml ) branded moong dal ( 30 gm ) branded gulab jamun ( 500 gm ) branded peda ( 100 gm ) branded fssai rabdi ( 80 gm ) branded fssai chilled oil ( 50 ml ) branded ludo ( including goti ) branded vaseline ( 5.5 gm ) branded facewash ( 50ml ) branded sonapapadi ( 500 gm ) branded mineral water ( bisleri / kinley ) ...
42616346 selection of agency for supply of ( food grains ) for daily use for prisoners. district jail madhepura. strong tomato okra sweet gourd jingli eggplant bitter gourd pumpkin red greens kadima cucumber lemon spinach greens ( remove the roots ) save ripe banana orange mango grape pomegranate pear raw papaya jackfruit watermelon melon cauliflower cabbage. seam tomato spinach greens eggplant radish pumpkin kadima cucumber jackfruit bitter gourd vince lemon save ripe banana orange guava grape pomegranate pear raw papaya dattavan ( of neem or acacia ) ildi cumin dried garlic round chilli dried red chilli coriander ginger mustard seeds gram flour iodized salt refine vermicelli cheese curd soybean bari fine flour semolina pea hot torch roasted gram gram sattu arva rice ( for kheer ) wheat grinding hens egg clean and cut chicken meat milk mustard oil ( kachhi ghani ) agmark cleaning and cutting fish rehu or catla potato milk powder chickpea chuddha sprouted gram ( salt mixed with lemon ) sprouted moong ( salt mixed with lemon ) firewood bread onion payup voucher file fly leaf flat file index file register 2 jista register 3 jista register 4 jista register 5 jista carbon tag bunch tea pepper peen gum 700 ml fevi stick camel ball pen red, black, blue reynolds trimape ( kytener ) pilate pen permanent marker stamp tree stamp eek computer paper a4 size century star xerox b1022 multifunction lasserjet cartridge hp printer laserjet p1566 cartridge hp printer inkjet ईक hp printer laserjet pro mfp m429fdn cartridge cartridge refilling cd cassette mouse usb cello tape stapler peen dvd cassette that someone stapler peen medium punching machine colorful flag incense sticks clay pot clay pot lid clay pot bud picked ramras soil ocher soil empty bin ( five kg plastic ) empty bin ( 15 kg plastic ) coconut broom coconut rope gi wire twine bamboo soup bamboo basket bleaching powder veem powder drain brush asiddha bottle 500 ml palm fan electrical wire copper 3 / 20 electrical wire copper 7 / 20 electrical wire copper 23 / 78 electrical wire copper 1mm electrical wire copper 2mm electrical wire copper 4mm lightning holder power switch extension board wiring board 8 / 12 wiring board 8 / 10 wiring pipe. ech wiring pipe 1 / 2 inch power plug 5 amps power socket 5 amps power plug 15 amps power socket 15 amps mcb 16 ampere mcb 32 amps led bulb 09 watt led bulb 13 watt led bulb 27 watt led bulb 30 watt flashlight battery k1050 torch bulb new torch eveready 02 sale new torch eveready 03 sale hand pump head hand pump hand pump plate hand pump head hand pump plunger hand pump washer hand pump rod handpiece rod socket handpiece nutbolt hand pump cylinder handpiece cylinder socket hand pump head waist hand pump loot hand washer plate washer hand pump flancha radisson of handpumps handpiece grate sulation safeda link lock 65 link lock 70 condenser 315 condenser 4 johnson babysoap 100g baby powder ( branded ) baby mosquito net coconut oil 50 ml coconut oil in kg sanitary ware cotton petticoat cotton blouse cotton saree salwar suit woolen cloth for one to three year old child normal clothes for a child of one to three years woolen cloth for a child of three to six years normal clothes for a child of three to six years steel plate 12 inch steel bowl 5 inch steel spoon abeer lifebuoy soap 100 grams colored paper flag gate paint ( branded ) paint brush 1 inch paint brush 2 inch paint brush 4 inch thickener 500 ml matchbox phenyl tablet a4 size envelope main switch envelope extended envelope small jute bag with karas name engraved on it caustic soap phenyl 1000 ml badha bath soap ( 100gm ) branded laundry soap ( 80 gm ) surf powder ( 75 gm ) branded surf powder ( 500 gm ) branded surf powder ( 500gm ) branded surf powder ( 1000 gm ) branded creme biscuit ( 60 gm ) branded cream biscuit ( 45 gm ) branded namkeen biscuits ( 300 gm ) branded sweet biscuit ( 300 gm ) thatandakamak namkeen mujiya ( 32 gm ) branded namkeen bhujia ( 400 gm ) branded potato chips ( 24 gm ) branded fssai mustard oil ( 70 ml ) branded toothpaste ( 21 gm ) branded branded shampoo ( 6ml ) tooth brush increased size branded tongue cleaner plastic glucose ( 200 gm ) branded chyavanprash ( 500 gm ) branded neel ujala ( 75 ml ) branded dental shine ( 45 ml ) branded toothpaste ( 45 ml ) branded moong dal ( 30 gm ) branded gulab jamun ( 500 gm ) branded peda ( 100 gm ) branded fssai rabdi ( 80 gm ) branded fssai chilled oil ( 50 ml ) branded ludo ( including goti ) branded vaseline ( 5.5 gm ) branded facewash ( 50ml ) branded sonapapadi ( 500 gm ) branded mineral water ( bisleri / kinley ) ...
40890865 bids are invited for boq of misc items fogging chemical , butane gas , led series bulb , wall putty , mop , water tank , condenser , steel piple , wire , swan neck pillar cock , angle cock , hand focet , two in in bib cock , paper roll stand set , steel jali , white cement , soap stand , cpvc pipe , cpvc socket , cpvc tee , cpvc elbow , cpvc union , cpvc solvent , hexa blade , push tap steel , taplone tape , ball valve , waste pipe , gi wire , pvc tape , cpvc mta , cpvc reducer socket , cpvc ball valve , cpvc fta , terrra cota red berger , steel window handle , wheel , led bulb , karkat nut volt , machine screw nut volt , iron blade , jipson pench , square pipe , washer , iron bit , nut volt , wood cutter chain , glass putty , geaser elemenet total quantity : 1663...
40807372 bids are invited for supply installation testing and commissioning of 3 tr ductable split air conditioner supply of 3 tr non inverter type ductable air cooled split ac unit , itc of 3 tr non inverter type ductable aircooled split ac unit , supplying and fixing extra copper pipe , providing of suitale ducting made out from 24swg gi sheet , aluminium grills without volume control damper , providing and fixing of gi duct box type volume control damper in ducting as required. , providing canvass connection , control power cable of 4 core 4 sqmm , control power cable of 4 core 1.5 sqmm , powder coated heavy duty iron stand , 25 mm pvc pipe for drain water , 40mm dia flexible pvc pipe , 8swg dia gi wire total quantity : 367...
40669827 bids are invited for sitc 3tr ductable ac supply of 3 tr non inverter type ductable air cooled split ac unit , itc of 3 tr non inverter type ductable aircooled split ac unit , supplying and fixing extra copper pipe , providing of suitale ducting made out from 24swg gi sheet , aluminium grills without volume control damper , providing and fixing of gi duct box type volume control damper in ducting as required. , providing canvass connection , control power cable of 4 core 2.5 sqmm , control power cable of 4 core 1.5 sqmm , powder coated heavy duty iron stand , 25 mm pvc pipe for drain water , 40mm dia flexible pvc pipe , 8swg dia gi wire total quantity : 5404...
39858890 bids are invited for clamps and connectors pad clmp sngl moose , ct pt clmp moose , ct clmp 3inch ips tube , isolatorpad clmp 3 inch , isolatorpad clmp 3 inch ips tube rigid typ , cb pad 8 hole clmp 3inch ips tube expnsn , pt clmp 3 inch ips tube , bpi clmp 3inch ips tube , t cnctr 3 inch ips tube to sngl acsr moose , t cnctr 3 inch ips tube to twn acsr moose , t cnctr twn zbra to twn zbra cndctr , t cnctr sngl zbra to sngl moose , t cnctr sngl moose to sngl moose , ct clmp acsr moose cndctr , isolator pad clmp twn moose , strait through clmp 3 inch ips tube , sngl tnsn hrdwr ftng twn zbra bolted , spcr twn zbra 300mm spcng , earthwire tnsnclmp 7 of 8 swg gi wire , pg clmp 7 of 8 swg gi wire , pad clmp 7 of 8 swg gi wire , sngl tnsn hrdwrftng sngl zbra boltd , pg clmp sngl acsr moose cndctr total quantity : 208...
39851637 bids are invited for sitc of 4 nos 3tr non inverter ductable split ac supply of 3 tr non inverter type ductable air cooled split ac unit , itc of 3 tr non inverter type ductable aircooled split ac unit , supplying and fixing extra copper pipe , providing of suitale ducting made out from 24swg gi sheet , aluminium grills without volume control damper , providing and fixing of gi duct box type volume control damper in ducting as required. , providing canvass connection , control power cable of 4 core 2.5 sqmm , control power cable of 4 core 1.5 sqmm , powder coated heavy duty iron stand , 25 mm pvc pipe for drain water , 40mm dia flexible pvc pipe , 8swg dia gi wire total quantity : 5404...
39745185 bids are invited for etr aurangabad and mux gaya supply of 3 tr non inverter type ductable air cooled split ac unit , itc of 3 tr non inverter type ductable aircooled split ac unit , supplying and fixing extra copper pipe , providing of suitale ducting made out from 24swg gi sheet , aluminium grills without volume control damper , providing and fixing of gi duct box type volume control damper in ducting as required. , providing canvass connection , control power cable of 4 core 2.5 sqmm , control power cable of 4 core 1.5 sqmm , powder coated heavy duty iron stand , 25 mm pvc pipe for drain water , 40mm dia flexible pvc pipe , 8swg dia gi wire sitc of 5 no of 3 tr ductable split air conditioning unit in total quantity : 262...
39725521 bids are invited for nagar patna supply of 3 tr non inverter type ductable air cooled split ac unit , itc of 3 tr non inverter type ductable aircooled split ac unit , supplying and fixing extra copper pipe , providing of suitale ducting made out from 24swg gi sheet , aluminium grills without volume control damper , providing and fixing of gi duct box type volume control damper in ducting as required. , providing canvass connection , control power cable of 4 core 2.5 sqmm , control power cable of 4 core 1.5 sqmm , powder coated heavy duty iron stand , 25 mm pvc pipe for drain water , 40mm dia flexible pvc pipe , 8swg dia gi wire sitc of 3 tr ductable split air conditioner for te rajendra total quantity : 452...
39589381 bids are invited for kotheyan jalalpur chapra providing micronutrients molasses apperance thick viscous dark brown blackish liquid smell swell smell jgari gud , replacment or repair of indicator startor relaysor contractors etc for 70 kld 1 nos and 30kld 1 nos pannel , purchase of starter for 03hp or 05hp motar pump , gi wire rope for mud pump , wood saw dust for 30 and 70kld , cpvc pipe 50mm , cpvc male adopter 50mm , cpvc gate valve 50mm , cpvc elbow 50mm , cpvc tee 50mm , cpvc union 50mm , cpvc pipe 20mm , cpvc union 20mm , cpvc tee 20mm , cpvc gate valve 20mm , cpvc cap 20mm , cpvc reducer 50mmx20mm , pvc non return 3 inch , cpvc elbow 20mm , cpvc solvent , contactor 25 amp , contactor 05 amp , selector switch with elements , delevery pipe 3 inch supply of materials for 30and 70 kld at 6th bn itbp total quantity : 2411...
39518887 auction sale of s.m. srcap (comprising of scrap railway material from coach no.99258,8824, 01233, 01217,97208,98009 nf/gscn,solar pole, gi wire, ss wire,rusted chair with arm and steel chair in round pipe, insect killer, fire extinguisher, rusted table & chair, trolly set (paras), cylinder stand, probe holding assembly, calivation block, unit machine, juction box, utility board, ictpn switch, rusted switch board chest drawer, tiabar(bg)90/b, meter box, junction box,2 pio angle bracket, battery box empty, alt pully, locker, iron sheet, petrol jeep broken & cutting, night light fitting, fl fitting,tool box, gi sheet, checker plate, name plate, hand lamp, board strip type 40mm x 6mm danger board, caution board. belt tensionong device, rusted almirah, net, battery charging terminal, born cab fan, axle pully,water tank,equalizinig beam and mixed iron big and small lamp scrap)misc. s.m. scrap etc....
39139458 tender for providing sone sand, stone chips, black, fly ash brick, loca 1 sand, tmt bars rod, saal wood, geo bags, gi wire/chain link wire mesh etc....
39136453 tender for supply of sand, stone chips, fly ash brick, tmt bars rod, saal wood, geo bags, gi wire/chain link wire mesh....
37901498 bids are invited for price bid rev plsng hdr a1693 ga 013 ms mecgale , bld nipple a1693 ga 026 23 1 4 mecgale , header a1693 ga 013 200nb ms mecgale , cage a1693 ga 013 gi wire mecgale , ventury a1693 ga 013 cast al mecgale , rev plsng hdr a1693 ga 026 40nb mecgale , air hdr a1693 ga 026 4 200nb ms mecgale , ventury a1693 ga 026 cast al mecgale , cage a1693 ga 026 gi wire mecgale , aeration pad a1693 ga 029 mecgale , silo airation pad mecgale fpa r1 20r 50 , fluidising cone a1693 ga 029 2 mecgale , body a1693 ga 029 1 ci mecgale , hx bolt a1693 ga 029 4 m16x50lg mecgale , gasket a1693 ga 029 3 3mm thk mecgale total quantity : 1255...
37887708 auction sale of scrap equipment indian stanadard medium beam, angle, gi wire net, light poles / posts....
37344403 bids are invited for aglp for ntpc sipat and kahalgaon fgd project as per boq sl. no. 1 of pg. no. 1 of tech. spec for kahalgaon fgd i.e. 50nb galv ms heavy duty pipe perf 3m long , as per boq sl. no. 2 of pg. no. 1 of tech. spec for kahalgaon fgd i.e. gi wire 14 swg , as per boq sl. no. 3 of pg. no. 1 of tech. spec for kahalgaon fgd i.e. gs flat 25 x 6 mm , as per boq sl. no. 4 of pg. no. 1 of tech. spec for kahalgaon fgd i.e. gs rod 20 mm dia 1000mm long , as per boq sl. no. 5 of pg. no. 1 of tech. spec for kahalgaon fgd i.e. test link 150x25x6 mm gs flat with box , as per boq sl. no. 6 of pg. no. 1 of tech. spec for sipat fgd i.e. 100 id 13 mm thk ci pipe glv prf 3m long , as per boq sl. no. 7 of pg. no. 1 of tech. spec for sipat fgd i.e. gi wire 14 swg , as per boq sl. no. 8 of pg. no. 1 of tech. spec for sipat fgd i.e. gs flat 25 x 6 mm , as per boq sl. no. 9 of pg. no. 1 of tech. spec for sipat fgd i.e. gs rod 20 mm dia.1000mm long , as per boq sl. no. 10 of pg. no. 1 of tech. spec for sipat fgd i.e. test link 150x25x6 mm gs flat with box total quantity : 27459...
37244506 supply of cement angle iron, nail, sand, stones, plywood waterproof , jug, bucket, mug line suta, jute rope, wire, hammer, gi wire ct...
37044332 tender for special repair to omqs / smqs at af station bihta 1 excavation in trenches in soft/loose soil not exceeding 1.5 mtr wide and not exceeding 1.5 m deep and getting out including forming bottom surface for laying of pipes complete all as specified and directed. 2 returning filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 mm thick complete all as specified and directed. 3 removal of excavated material to a distance not exc 50 meter and depositing wheredirected at a level not exceeding 1.5 m above the starting point complete all as specified and directed. 4 supplying, laying and cushioning for cable protection in trenches 8 cm deep before laying cable and 15 cm deep over the cable including well punning complete all as specified and dierected 5 m&l cement concrete 1:5:10 type e2, using 40 mm graded stone coarse aggregate in sunken floor, all as specified and directed 6 m&lreinforced cement concrete (1:2:4) type b 1, (20 mm graded aggregate) as in slab supported on walls, beam, column and in similar work, complete all as specified and directed. 7 s & f for factory made solid pvc door frame of size 50mm x 47mm made out of 5mm plain colour pvc sheet, reinforced with ms square tube fixed in opening complete as per manufacturers specifications and as directed. 8 s & f for 30 mm thick factory made solid panel pvc door shutter conferming to criteria of testing as per is : 4020, consisting of frame made out of ms tube of 19 guage thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails ms frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded pvc `c channel of size 30x50mm forming styles and 5mm thick 75mm wide pvc sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross pvc sheet as gap insert for top rail and bottom rail panelling of 5 mm thick pvc sheet to be fitted in the ms frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick pvc sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick pvc strip of 20 mm width is to be struck on the interior side of c channel using pvc solvent adhesive complete as per manufacturers specifications & drawings & all as directed. 9 s & f pressed steel frames of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs hinges lock strike plate etc complete as specified. 10 s & f pressed steel frames of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete as specified. 11 m & l for pcc 1:3:6 type c 0 using 12.5mm aggregate crushed stone aggregate as in filling back side of pressed steel door/window frames, all as specified & directed. 12 s&f glazed/wire gauged/skeleton shutter 35 mm thick out of (well kilnseasoned)2nd class hard wood (hollock) the size of rails and style as per is chemically pressure treated in factory gainst termite infestation prepared to receive wire gauge (without sash bars) edges of frame chamfered or rounded fitted with cut and mitered beads, all as specified & directed.(note : wire gauge/glazing to be measured and paid separately). 13 s&f factory made 40 mm thick plain, framed, panelled shutter (two panel) with lock rail using 2nd class hw (hollock) kiln seasoned andchemicallypressure treated the size of rail and style as per is 1003 (part i) and panel insert of 9mm thick bwp commercial facing plywood or 12mm veneered particle boards with commercial ply all as specified 14 s&f plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed in 2nd class hardwood. 15 s&f of 25 mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both sides all as specified and as directed. 16 s&f in repairs of 12 mm thick plywood, grade bwr, type bb, fixed with screws to timber frame work etc. in built in cupboard complete all as specified and as directed. 17 s&f for 100mm long mild steel butt hinges, heavy weight cold rolled mild steel, all as specified and as directed. 18 s&f for 75mm long mild steel butt hinges, heavy weight cold rolled mild steel, all as specified and as directed. 19 s&f 150 mm long aluminium anodised handles, cast type, all as specified and as directed. 20 s&f for 150 mm long aluminium, anodised, barrel tower bolts of extruded section, all as specified and as directed. 21 s&f 300 mm long aluminium alloy, anodised, sliding dooor bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, all as specified and as directed. 22 s&f for 200 mm long aluminium, anodised, barrel tower bolts of extruded section, all as specified and as directed. 23 s&f mild steel 300 mm ordinary rat tail rod pattern springs including roller & rooler plate complete all as specified and as directed. 24 s&f floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor overall length of cover plate 140mm, all as specified and as directed. 25 s&f hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws of 100 mm size, all as specified and as directed. 26 s&f in repairs of harrison rail mild steel chromium plated of 19/20mm dia for curtain rod fixed with two nos of brackets for each rail all as specified and as directed. 27 s&f mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm, all as specified and as directed. 28 s&f anodised aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified & directed. (note : minimum thickness of powder coating 50 micron). 29 s&f anodised aluminium powder coated window and ventilator shutters, hung type without sash bar, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. anodised aluminium fittings such as peg stays 150 mm long (01 no), hinges b 21 100 mm long (02 no), suitable handle (01 no) complete all as specified.(note : minimum thickness of powder coating 50 micron). 30 s&f sheet glass 4 mm thick ordinary quality & glazing with rubber gasket in square n.exc 0.5 sqm in each pane, all as specified and directed.. 31 s&f 3 mm thick figured glass, pinhead type in squares n.exc 0.50 sqm each pane, all as specified and directed. 32 m&lfor mild steel tmt bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete, all specified and directed. 33 s&f in repair 18mm thick celuka pvc sheet minimum 600 kg/cum density grade 1 quality of both side plain white colour rigidlam glossy finish fixed with screws, solvent cement/adhesive as per manufacturer instructions to make kitchen cabinet sides top and bottom and shelves inside the cabinet completeas per specifications and as directed. note: (i) cup board accessories ie fittings,handles,hinges, will be measured and paid under this schedule.(ii) quoted rates deem to be include fixing of cabinet on wall with appropriate rawl plug/ dash through fastener (hammer type).(iii) fabrication and installation of cabinet to be carried out by authorised vendor of manufacturer only. 34 s&f auto closing stainless steel (grade 304) hinges 35 mm of 0 crank (kh 001) or 8 crank (kh 002) openable at 110 degree for kitchen cabinet shutters all as specified & directed. 35 s&f stainless steel handles of 100 mm size for kitchen cabinet shutter complete all as specified. 36 m&l for app basedpolymeric water proofing membrane minimum weight 3 kg/ sqm and minimum 3mm thick reinforced with polyster non wove fabrick (weight not less than 150gms/sqm), laid with torched application with the strict supervision of manufacturers technical supervisor, laid over hot blown bitumen 85/25 grade @1.2 kg per sqm over bitumen primer @0.30 ltr/sqm including cleaning surface, complete all as specified and directed.(note membrane shall be laid with 100mm side/end lap on prepared surface as per manufacturer instruction work shall be carried out strictly with the technical tradesmen and supervision of technical staff of manufacturer) 37 m&l for 40 mm thick brick tiles laid on bedding of 15 mm thick cement mortar (1:6) and joints grouted flush in cement mortar (1:3) on treated roof all as specified and as directed 38 m&l for applying bituminous primer @ 0.40 kg/sqm and applying one coat of hot blown bitumen of grade 85/25 @ 1.20 kg/sqm as in sunken complete all as specified including fixing of 40 mm dia gi spout pipe at bottom of slab/plastered surface etc, all as specified & directed. 39 roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc, all as specified & directed. 40 m&l for providing cement concrete type b 1, 1:2:4 (20 mm graded aggregate) as in roof padding, roof kerbs (rounded or chamfered on edge) etc all as specified & directed. 41 m&l 75 mm thick cement concrete type d 2, 1:4:8 (using 40 mm graded aggregate) as in subbase to floor, ll as specified and directed.. 42 m&l for 25 mm thick cement concrete type b 0, 1:2:4 (12.5 mm graded aggregate) as on floor, ll as specified and directed.. 43 m & lnon skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tiles including 15 mm thick screed bed in cement mortar 1:6 all as specified and directed. 44 m & lnon skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tiles including 15 mm thick screed bed 1:6 all as specified and directed. 45 m & l glazed ceramic coloured tiles of approved quality isi marked (450 x 300 x 7 mm / 350 x 250 x 7 mmthick) as in vertical surfaces such as skirting dados etc set jointed in neat cement slurry and pointed in coloured cement to match with the tiles including 1:4 cement plaster 10 mm thick on brick work and concrete surface, all as specified and directed. 46 m&l for 15 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms (including a hole of gas pipe) and like including 15 mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, all as specified and directed. 47 rounding to edges of stone slabs one edge, such as in steps, cooking platform, and similar situations, all as specified and directed.. 48 m&l for rendering 10 mm thick in cement mortor 1:4 on fair faces of brick work, surfaces finished even and fair without using extra cementwith water proofing compound, all as specified and directed. (note : wpc shall be measured and paid seperatelly). 49 m&l for 10 mm thick rendering in cement mortor (1:6) on air faces of brick work, surfaces finished even and smooth without using extra cement cement, all as specified and directed 50 m & l for 15 mm thick rendering in cm (1:4) on vertical surfaces of brick walls finished even and smooth without using extra cement with using water proofing compound, all as specified & directed. (note wpc will be measured and paid separately). 51 m&l for 5 mm thick rendering in cm (1:3) on ceiling surfacesoffinished even and fair without using extra cement, all as specified & directed.. 52 supply only integral water proofing compound 53 s&f 15 mm gi tubes medium grade with all fitting and fixed complete to walls, ceilings or laid infloors including taking up or down old steel tube complete all as specified and directed. 54 s&f 20 mm gi tubes medium grade with all fitting and fixed complete to walls, ceilings or laid infloors including taking up or down old steel tube complete all as specified and directed. 55 m&l for preparation of new wood basesurfaces of any description, over 10 cm in width or girth, not otherwise described and appling twocoats of synthetic enamel paint (ordinary tint) overone coats of pink primer, all as specified and directed. 56 m&l peparation of old painted wooden surfaes of any dscription over 10cm width or girth and applying one coatof synthetic enamel paint complete all as specified and as directed. 57 m&l peparation of old painted steel surfaces of any description over 10cmwidth or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. 58 m&l for preparation of new plastered surfaces of ceiling and applying three coats of white wash all as specified and directed. 59 m&l for preparation of old surfaces of ceiling and applying two coats of white washall as specified and directed. 60 m&l for preparation of new plastered surfaces of wall and applying three coats of white wash all as specified and directed. 61 m&l for preparation of old decorated plasteredsurfaces of wall and applying two coat of white wash all as specified and directed. 62 m&l for preparation of new plastered surfaces of wall and applying two coats oil bound distemper over a coat of alkali resistant primer over a coat of 1 mm thick wall care putty in two different layers complete all as specified & as directed.(note treatment slall be carried our by spraying with mechanical means) 63 m&l for complete removal of existing treatment of wall and applying two coats oil bound distemper over a coat of alkali resistant primer over a coat of 1 mm thick wall care putty in two different layers complete all as specified & as directed.(note treatment slall be carried our by spraying with mechanical means) 64 m&l for complete removing of existing treatment of wall surfaces by scrapping with mechanical sander (having mechanical vacuum mechanism)to make surface clean, free from dust, loose paint etc and applying two coat of cement base paint of different colours complete all as specified and directed. 65 m&l for preparation of new plastered surfaces of walls and applying two coat of cement base paint of any colours and pattern (two or more colours) complete all as specified and directed.(note : colour and pattern of paint will be directed by ge) 66 m&l for pvc (swr) pipe of 110 mm boresingle socketed in any length with rubber ring joint fixed to wall with suitable clamps of adequate numbers etc complete all as specified and directed. 67 s&fpvc swr bends 110 mm boreall as specified and directed. 68 s&f cast iron soil, waste pipe100 mm dia, sand cast, in any length with or without ear, with cement joint, laid in trenches, complete all as specified. 69 s&f cast iron soil, wastepipe100 mm dia, sand cast, in any length with or without ear, with cement joint, laid in trenches, complete all as specified. 70 s&f cast iron soil, waste and vent pipe100 mm dia, sand cast, in any length with or without ear, with cement joint, fixed on wall, complete all as specified. 71 s&f cast iron soil, waste and vent pipe100 mm dia, sand cast, in any length with or without ear, with cement joint, fixed on wall, complete all as specified & directed. 72 s & f in repairs of 100 mm bore cast iron bends of any radius diminshing pieces or tappers (larger bore measured), all as specified & directed.. 73 s & f in repairs of 75 mm bore cast iron bends of any radius diminshing pieces or tappers (larger bore measured), all as specified & directed.. 74 s&f cast iron cowls of 100 mm bore pipe, all as specified & directed. 75 s & f in repairs cast iron floor trap with chromium plated graating of 100 mm size including jointing to waste pipe with cement joints etc, all as specified & directed. 76 s&f soap dish brass chromium plated decorative type, size 160x90mm complete all as specifed and directed. 77 s&f 600 mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick ac buildg board or commercial plywood and fixed to wooden plugs with cpbrass screws and cup washers complete all as specified and directed. 78 s&f in repairbrass chromium plated, tubular towel rails 20 mm dia, d type, 60cm long between flanges, completed all as specified and directed. 79 s&f in repair chromium plated 125 mm size shower rose with swivel joints, in square with cp long shank arm including fixing to steel pipe or union of 15 mm bore, complete all as specified and as directed. 80 s&f in repairs vitreous china squatting pan “orissa pattern” of size 580 x 440mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and lime concrete bedding complete all as specified in ssr and including s&f trap set complete all as specified and directed. 81 s&f in repairs pvc flushing cistern 10 ltr capacity valve less syphonic action type low level with and including dual flushball valve float & handle, waste pipe & brackets complete set complete all as specified and directed. 82 s & f in repairvitreous china wash basin, flat back, size 630x450mm white, excluding waste coupling, chain & plug, ci prackets, pvc waste pipe 32 mm,and porcelain stopper but including brackets. 83 s&f in repair chromium plated fancy type, stop cock/angular cock, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends of size 15mm bore. complete all as specified and directed. 84 s&f in repair chromium plated concealed type, stop valve, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends of size 15mm bore. complete all as specified and directed. 85 s & f in repair 15mm bore chromium plated bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron or brass ferrule, complete all as specified and directed. 86 s&f sheet glass assembly consisting of 5.5mm thick sheet glass shelf 12mm wide with chromium plated bracket guard and railing, 600mm long,complete all as specified and directed. 87 s & f in repair pillar taps fancy type(long body)cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, screwed for iron pipe, complete all as specified and directed. 88 s&f in repairpvc connections 15mm size with ptmt nuts of length 450 mm, complete all as specified and as directed. 89 s&frotational moulded polythene water storage tank of capacity 500 ltrs (cylindrical/vertical with closed top), triple layer construction, isi marked, hoisted & fixed in position including followings : (i)20 mm gi pipe medium grade,over flow 450mm long.(ii) 20 mm gi pipe medium grade waste pipe 600mm long.(iii) 20 mm brass ball valve/float valves, high pressure & high density plastic ball screwed for iron pipe and fixed.(iv) 20 mm gun metal globe/gate valve with iron wheel head, screwed on both ends for fixing including one gi nipple(20mm bore). 90 s&f in repair sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including pvcwaste pipe, cp waste coupling,bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified anddirected. 91 s&f 1mm thick stainless steel kitchen plate rack of size 750x 900mm best quality assembled with brass washer and nut and bolts including hooks (spoon/cup holders) complete all as specified & directed. 92 demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level), all as specified & directed..note : all demolished items/ debris to be removed out side of mod land. 93 demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, all as specified & directed..note : all demolished items/ debris to be removed out side of mod land. 94 demolition of reinforced cement concrete of any description & in any position, complete all as specified and directed. 95 dismantling of stone slabs and tiles of any description or thickness in floors aprons etc including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. 96 dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises,all as specified and directed. 97 taking down cement plaster on brick or stone walls, etc, incl raking out joints, hacking for key, scrubbing down with water, etc & prepare to receive new plaster complete all as specified and directed 98 taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each and removal from site all as specified and directed. 99 taking down chowkats or frame with shutter (without taking out shutter from the frame) exceeding 1.50 sqm and n exc 4.00 sqm each and removal from site all as specified and directed 100 taking down of shutters of any description exc 1.00 sqm but n. exc 2 sqm each, all as specified and directed 101 taiking up or down steel tubing and connections, 15 mm bore including cleaning, complete all as specified and directed. 102 taiking up or down steel tubing and connections, 20 mm bore including cleaning, complete all as specified and directed. 103 dismantling pvc water tankcapacity exceeding 250 but not exceeding 500 ltr, complete all as specified and directed. 104 taking down100/75 mm cast iron soil waste pipe (any size or patterns) moulding all fittings heads shoes, bends etc (measured over all as fixed along the confrece line over fittings and accessories), all as specified and directed. 105 taking down rain water pipes (any size or pattern) ,including all fittings all as specified and directted . 106 demolition of bricks (laid flat or on edge) or brick tiles in floors, channels, kerbs, aprons, etc (each layer) laid, bedded and pointed in any mortar including removal of debris/muds etc complete all as specified and as directed.note : all demolished items/ debris to be removed out side of mod land. 107 demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) and finally cleaning the surface with wire brush to remove old treatment to lay pcc padding, complete all as specified and directed..note : all demolished items/ debris to be removed out side of mod land 108 taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc, complete all as specified and directed. 109 taking down old unserviceable mcb db tpn4 way (vertical), double door, 415 v, ac, 50 hz, includingmcb63 amps 16 ka ,ip 40 protection conforming to is 13032 universal mounting with copper bus bar,neutral link, earth link, earthing studs, detachable gland plates with knockouts on both sides, complete all as specified & directed. 110 material and labour for concealed point wring for one light/fan/exhaust fan point controlled by 1 no,one way 5/6 amp switch ,using approved colour coding (phase red,neutral black,earth green) complete with frls pvc insulated and unshealthedstranded copper conductor cable 1.5 sqmm single coreconforming to is 694 including medium duty concealed unplasticised pvc conduit conforming to is 9537(part 3) and isi marked not less than 20 mm dia with concealed in wall pressed steel terminal box of not less than 2 mm thick of required size including painting terminal boxs inside and outside with two coat of synthetic enamle paint over one coat of red oxide primerwith top cover3 mm thickbakelight laminated sheetwith brass screws and cup washer with all assessories including frls pvc insulated and unshealthedstranded copper conductor cable 1.5 sqmm single core in green colouras earth wireconnected to earth dolly . complete all as specified and directed . 111 all as per item no 110 above butfor one 3 pin /5 pin socket outlet 5 amp controlled by 1 no one way 5/6 amp switch on same board along with other switches ,fan regulator etc. 112 all as per item no 110 above butfor one 3 pin /5 pin socket outlet 5 amp controlled by 1 no one way 5/6 amp switch on independent board. 113 all as per item no 110 above butfor one call bell/buzzer point controlled by one push button switch. 114 material and labour for point wring ,using approved colour coding (phase red,neutral black,earth green) complete for one socket outlet 15 amp on independent board with frls pvc insulated and unshealthedstranded copper conductor cable 2.5 sqmm single coreconforming to is 694 including medium duty concealed unplasticised pvc conduit conforming to is 9537(part 3) and isi marked not less than 20 mm dia with concealed in wall pressed steel terminal box of not less than 2 mm thick of required size including painting terminal boxs inside and outside with two coat of synthetic enamle paint over one coat of red oxide primerwith top cover3 mm thickbakelight laminated sheetwith brass screws and cup washer with all assessories including frls pvc insulated and unshealthedstranded copper conductor cable 2.5 sqmm single core in green colouras earth wireconnected to earth dolly complete all as specified and directed. 115 s&f switch piano flush button single pole one way 5/6 amp, 240 volts conforming to is 3854 isi marked all as specified and directed. 116 s&ffor socket outlet, 5 pin, 5/6 amp flush type conforming to is 1293 isi marked all as specified and directed. 117 s&f switch piano flush button single pole one way 15 amp, 240 volts conforming to is 3854 isi marked including taking down old one, all as specified and directed. 118 s&ffor socket outlet, 3 pin, 15 amp flush type conforming to is 1293 isi marked including taking down old one, all as specified and directed. 119 s&fceiling rose, surface bakelite,isolated bodythree terminals including taking down old one, all as specified and directed. 120 s&f lamp holder pvc/polycarbonate type with back plate suitable for batten fittings, all as specified and directed. 121 supply only led bulb of 09 watt complete all as specified and directed. 122 s&f forbell push flush type 5 a sp 240 v all as specified and directed. 123 s&fbell (ding dong) 230 volts, single pole all as specified and directed. 124 taking down ceiling fan including cable, dismantling blades and carry out mnr repair and fixing of damaged parts like capacitor, bushes, bearings and screws etc and keeping in safe custody of contractor up to re fixing in the same. all as specified & directed. 125 m&l for painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust, all as specified and directed. 126 hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan, all as specified and directed. 127 m & l for repair / rewinding of ceiling fand replacement of requisite spares like bush, bearing, down rod, capacitor, fan clamp, fan blade etc if necessary all as specified and directed. 128 m & l for repair / rewinding of exaust fand replacement of requisite spares like bush, bearing, capacitor, fan clamp, fan blade etc if necessary all as specified and directed. 129 supply and fixing led tube lights fitting 1x 18w, 220v, including led tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling roseand complete all as specified and directed. 130 supply and fixing led batten type tube light complete fitting 1x 10 w, 220v,connecting up with three core flexible copper conductor cable of suitable size from ceiling roseand complete all as specified and directed. 131 supply &fixing and connecting up complete mcb db tpn 4 way (vertical), double door, 415 v, ac, 50 hz, with and includingmcb63 amps 16 ka ,ip 40 protection conforming to is 13032 universal mounting with copper bus bar,neutral link, earth link, earthing studs, detachable gland plates with knockouts on both sides, complete all as specified & directed. 132 s&f sheet metal enclosures (mcb distribution board) when mcb’s to be used singlepole and neutral 8 ways 220 volt with 200 amps rated bus bar, double door with bus bar neutral link earth bar, din rail, necessary blanking plated, including fixing db flush in wall complete with making good disturbed surfaces and colour matching all as specified and directed including taking down old one, complete all as specified & directed. 133 s&f mcb’s single pole, 10 ka ,32 amp to 40 amp 240 volts,and of b series with required wiring connections and lugs etc and erecting in provided enclouser/destribution board.mcbs shall be of current limiting type ,isi marked conforming to is 8828 1996, including taking down old one, complete all as specified & directed. 134 s&f sheet metalenclosure with socket plug top and mcbs single pole with a two pin and earth plug andsocket complete with one single pole mcb ofc series of cap 20 amps including taking out the old one all as specified and directed. 135 s&f mcb’s dp, 10 ka, 32 amp to 40 amp 240 volts,and of b series with required wiring connections and lugs etc and erecting in provided enclouser/destribution board. mcbs shall be of current limiting type ,isi marked conforming to is 8828 1996,including taking down old one complete all as directed. 136 supply and fixing stud 10 w led lights energy saving bulk head luminaries including led light driver, holder connecting up with three core flexible copper conductor cable of suitable size from ceiling roseand complete all as specified and directed. 137 s&f sub main wiring using approved colour coding (phase red,neutral black,earth green) complete with two single core frls pvc insulated and unsheathedstranded copper conductor cable 6 sqmmas current carrying conductor and one run of 6.0 sqmm as neutral cable ,voltage rating 1100 volt ,isi marked drawn in and including concealed pvc conduit isi marked of dia not less than 25 mm and thickness 2 mm with stranded accessories along with one run of frls pvc green colour insulated,unshealthed,stranded copper conductor of size 6 sqmm all as specified and directedincluding taking down old one, complete all as specified and directed.(note: two run of single core frls pvc cable with one run of earth contunity conductor and conduit shall be measured as one unit.) 138 m&l for earthing complete with galvanized steel earth plate 600x600x6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvanised earth lead wire of 4mm dia as earthing lead by means of bolts, nuts, check nuts, and washers of galvanised iron or steel besides welding at all joints as shown in drawings and including excavation and earth work, gi pipe light grade 15 mm bore for protection of giwire from earth electrodeto test point /machinery / equipment.supplying and laying charcoal dustcomman saltpcc(1:2:4) type b1 using 20 mm gradedstone agregratechamber andrcc cover 54 cm x 54cm x50 mm thick (1:2:4) type b 1using 20 mm stone agrigrtae )reinforced with 8 mm dia tmt bars @75mm c/c both ways with mild steel handle 12 mm dia,using round bar ,pgi funnel with wire mesh, 20 mm dia gi pipe medium grade for watering all as shown in electrical plate no 3 of ssr part 1including testing and taking out the old one complete all as specified and directed(note cost of gi wire and gi protection pipe up to a distance 7.5 m shall be includedin quated rate of above items) 139 s&f 415 v, 10 ka ,b curve miniature circuit breaker mcb tpn 63 amps, 16 ka complete all as specified and directed. 140 supply, laying, connecting and testing xlpe cable underground pvc insulated and over all sheathed with aluminium conductor heavy duty 1100 volts grade 3.5 core 35 sqmm sizes, laid in trenches, floors, ducts passing through pipe forroad crossing etc including taking down old unsv cable of any size complete all as directed including taking out old damaged cable and all as specified and directed. (note excavation, earth work, brick protection sand cushioningand gi pipe etc shall be measured & paid for separately) 141 m&l for laying of bricks subclass ‘b’ old size having crushing strengh not s than 75 kg/sqcm, laid flat perpendicular to the direction of cable for protection of cable complete all as specified & directed. 142 m&l gi tubing 50 mm dia light grade, laid in trench/floor or fixed on wall with all fixingaccessories etc as specified and directed. ...
36286256 tender for supply of host plantation for 50 rearers 1. vermi compost, rearing equipment for 20 reare 1. secature/looping shear 2. gator sprayer 3. nylon net (40 x 30 x 10) 4. bamboo 5. slaked lime 6. bleaching powder 7. sodium hypo chloride for 01 private tasar graineur 1 microscope with light arrangement 2. egg laying boxes 3. egg lying cabinet (wooden) 4. wooden mouth testing table 5. wooden stools 6. plastic drums 7. plastic drums 8. plastic tub, plastic tub 10.plastic mug 11.morter & pestle 12. measuring cylinder 13. weighing balance 14.disinfection mask 15.gi wire 16. wet & dry thermometer 17.max. min thermometer 18.formalin 19.koh 20.bleaching powder 21.bloting paper 22.muslin cloth 23.scissors 24.slides and cover slip 25.solar lantern...
35909205 bids are invited for dia 4mm gi chain link fencing gi chain link fabric fencing mesh size 50mmx50mm gi wire total quantity : 3780...
35780026 tender for chain link fencing work, weld mesh panel work, g.i. chain link febric fencing mesh size 50mm x 50mm gi wire dia 4 mm....
35478699 supply of 132 kv clamps & connectors for hurl barauni plant. pad clmp sngl moose 2 ct / pt clmp moose 3 ct clmp 3 ips tube 4 isolatorpad clmp 3 ips tube / expnsn 5 isolatorpad clmp 3ips tube rigid typ. 6 cb pad 8 hole clmp 3 ips tube expnsn 7 pt clmp 3 ips tube 8 bpi clmp 3 ips tube 9 t cnctr 3 ips tube to sngl acsr moose 10 t cnctr 3 ips tube to twn acsr moose 11 t cnctr twn zbra to twn zbra cndctr 12 t cnctr sngl zbra to sngl moose 13 t cnctr sngl moose to sngl moose 14 ct clmp acsr moose cndctr 15 isolator pad clmp twn moose 16 strait through clmp 3 ips tube 17 sngl tnsn hrdwr ftng twn zbra bolted 18 spcr twn zbra ( 300mm spcng ) 19 earthwire tnsnclmp 7 / 8 swg gi wire 20 pg clmp 7 / 8 swg gi wire 21 pad clmp 7 / 8 swg gi wire 22 sngl tnsn hrdwrftng sngl zbra boltd 23 pg clmp sngl acsr moose cndctr...
35202853 supply of coconut brooms with wooden plugo nominal length 800 mm , weight 500 gram min without wooden plug size of wooden plug, taper wooden plug shall be of length 150 mm reasonably round having dia of 25 mm at top and 5 mm at bottom material of tide up round gt wire no of round is 4, size of gi wire dia 1.2 mm . [ warranty period: 30 months after the date of delivery ] ...
35091094 bids are invited for 125 amp mccb and others 2x4 sq mm and 1x4 sq mm for elcb db to connector box , switch socket unit 15 by 16 a modular switch 02 nos , 63 amp connector 24 bay with pvc by gi suitable box 01 nos including gi nut bolt fasnut , supply of 1point1 kv grade xlpe insulated and 10 no gi wire double , aluminium lugs for following size of pvc included and pvc sheethed xlpe aluminium conductor cable of 1 point 1 kv grade as required 3 and half x35 sqmm 35mm , 125 amp mccb pinal box 750mm length 900mm hight 200 mm deep 16mm gag with powder coated paint , 4 pole mccb with voltmeter and volt selector switch and selector switch and r y b indictor lamp and 6 by 10 mcb 03 nos and control wiring and 200 amp bus bar , 32 or 40 or 60 elcb100 by 300ma mcb and basbar to elcb suitable copper wiring , fixing 125 mccb panel box total quantity : 147...
34928921 annual maintenance contract ( for 33kv / 6.6 kv ht switchyard, substation equipment ) ( arc items ) for electrical works and general cp / psp / mov related works at erpl patna pump station 2 complete quarterly manintenance of 33 kv / 6.6 kv ht switchyard equipments, substation equipments, pump station equipments / area, under erpl patna station jurisdiction as defined in scope of work & technical specifications. list of equipments are as follows: ( a ) transformer & ngr ( b ) circuit breaker ( vcb ) ( c ) air circuit breaker ( acb ) ( d ) current transformer ( e ) potential transformer ( f ) isolatorswitch ( g ) earth switch ( h ) lightning arrestor ( i ) post insulator ( j ) protection system of entire electrical system ( k ) capacitor bank ( l ) mov actuatorrates will be inclusive of boarding, lodging, local conveyance, mobilization & demobilization, manpower, equipment, tools & tackles and all other incidental cost. 3 complete half yearly manintenance of 33 kv / 6.6 kv ht switchyard equipments, substation equipments, pump station equipments / area, under erpl patna station jurisdiction as defined in scope of work & technical specifications. list of equipments are as follows: ( a ) transformer & ngr ( b ) circuit breaker ( vcb ) ( c ) air circuit breaker ( acb ) ( d ) current transformer ( e ) potential transformer ( f ) isolatorswitch ( g ) earth switch ( h ) lightning arrestor ( i ) post insulator ( j ) protection system of entire electrical system ( k ) capacitor bank ( l ) mov actuatorrates will be inclusive of boarding, lodging, local conveyance, mobilization & demobilization, manpower, equipment, tools & tackles and all other incidental cost. 4 complete yearlymanintenance of 33 kv / 6.6 kv ht switchyard equipments, substation equipments, pump station equipments / area, under erpl patna station jurisdiction as defined in scope of work & technical specifications. list of equipments are as follows: ( a ) transformer & ngr ( b ) circuit breaker ( vcb ) ( c ) air circuit breaker ( acb ) ( d ) current transformer ( e ) potential transformer ( f ) isolatorswitch ( g ) earth switch ( h ) lightning arrestor ( i ) post insulator ( j ) protection system of entire electrical system ( k ) capacitor bank ( l ) mov actuatorrates will be inclusive of boarding, lodging, local conveyance, mobilization & demobilization, manpower, equipment, tools & tackles and all other incidental cost. 5 relay coordination, testing and calibration ( relay calibrator being used for the work should be calibrated by an nabl authorized agency ) of all relays as defined in scope of work & technical specifications to be done once in a year. ( 1 unit of this item constitutes 138 relays listed in scope of work & technical specifications ) . these 138 relays constitute of numerical relays and electromagnetic relays ( mostly contact multiplier like k86, tc supn, transformer aux, etc ) rates will be inclusive of boarding, lodging, local conveyance, mobilization & demobilization, manpower, equipment, tools & tackles and all other incidental cost. work schedule will be as per instruction of site engineer / eic. 6 testing and calibration ( meter calibrator being used for the work should be calibrated by an nabl authorized agency ) of all meters as defined in scope of work & technical specifications to be done once in a year. ( 1 unit of this item constitutes 165 meters listed in scope of work & technical specifications ) .rates will be inclusive of boarding, lodging, local conveyance, mobilization & demobilization, manpower, equipment, tools & tackles and all other incidental cost. work schedule will be as per instruction of site engineer / eic. 7 testing and calibration ( through nabl certified laboratory ) of all electrical measuring instruments as defined in scope of work & technical specifications to be done once in a year. ( 1 unit of this item constitutes 10 measuring instruments listed in scope of work & technical specifications ) . rates will be inclusive of boarding, lodging, local conveyance, mobilization & demobilization, manpower, equipment, tools & tackles and all other incidental cost. work schedule will be as per instruction of site engineer / eic. 8 routine breakdown visit as defined in scope of work & technical specifications.routine breakdown maintenance means identifying reason for malfunction / not working / not running of electrical equipment on s witching ( as per instruction of eic ) , by a team of ( 1+1 ) engineer + assistants, in time schedule given by engineer in charge ( quantity of routine breakdown maintenance will be number of days as per schedule by eic, considering 8 working hours per day ) rates will be inclusive of boarding, lodging, local conveyance, mobilization & demobilization, manpower, equipment, tools & tackles and all other incidental cost. 9 minor breakdown manintenance as defined in scope of work & technical specifications. minor faults in the installed items are where no major breakdown has occurred. in minor breakdown maintenance, system is to be stabilized in maximum duration of 12 working hours from the time of instruction by se / eic and shall mean a team of ( 1+4 ) engineer + assistants. rates will be inclusive of boarding, lodging, local conveyance, mobilization & demobilization, manpower, equipment, tools & tackles and all other incidental cost. work schedule will be as per instruction of site engineer / eic. 10 major breakdown manintenance as defined in scope of work & technical specifications.work shall be termed as major breakdown, if items such as crane, specialized lifting equipment, highly skilled man power deputation, major spares replacements, etc. are required. [ spare shall be given by iocl or extra payment shall be made for this ] , in this, system is to be stabilized in time schedule given by engineer in charge. rates will be inclusive of boarding, lodging, local conveyance, mobilization & demobilization, manpower, equipment, tools & tackles and all other incidental cost. 11 attending power failure to system in cp / rcp / mov station as defined in scope of work & technical specifications. stations have lt power supply controlled by mcb / contactor. restoration after power failure / supply interruption to the input terminal of main system installed, is only in scope of this work. power failure or interruption issue is to be attended by ( restoring supply ) / ( bypassing inverter ) within 6 hours ( from the time of instruction by se / eic ) . in case of fault in inverter / battery / battery charger, it must be repaired and reinstalled in station within 72 hours ( from the time of instruction by se / eic ) [ cost of any part replacement will be paid extra ] . contractor has to arrange for repairing of inverter / battery / battery chargerrates will be inclusive of boarding, lodging, local conveyance, mobilization & demobilization, manpower, equipment, tools & tackles and all other incidental cost. work schedule will be as per instruction of site engineer / eic. 12 service assistance for psp checking, inspecting proper functioning of lights and exhaust fans, refilling distilled water in batteries, cleaning of solar panels, checking fence energizer, checking earth pit & anode bed condition, checking system functionality, upkeeping of jbs, cleaning trenches and earth pits, greasing and painting of rusted parts in cp stations complete in all respectunder the supervision of iocl personnel as per direction of e i c. contractor has to arrange distilled water & lodgingarrangement for the worker on his own expense. one personnel of contractor may commute withiocl personnel in office vehicle during cp / rcp / sv station visits, but he has to reach to vehicle start point and return from vehicle end point at his own expense. all required material, tools & tackles, equipment is to be arranged by contractor.rates will be inclusive of boarding, lodging, local conveyance, mobilization & demobilization, manpower, equipment, tools & tackles and all other incidental cost. work schedule will be as per instruction of site engineer / eic. 1 unit is for 1 cp station. [ maintenance of 2 cp stations shall require 1 semiskilled manday ] 13 service assistance for psp survey ( during day period ) including greasing of psp connection, carrying measuring instruments to tlp site, bolting of tlp post door, cleaning of tlps and clearing nearby vegetations complete in all respect including all tools & tackles and consumables under the supervision of iocl personnel as per direction of e i c. contractor has to arrange lodging of his worker on his own expense. one personnel of contractor may commute withiocl personnel in office vehicle during psp in row, but he has to reach to vehicle start point and return from vehicle end point at his own expense. all required material, tools & tackles, equipment is to be arranged by contractor. for psp measurement, iocl meters will be used. rates will be inclusive of boarding, lodging, local conveyance, mobilization & demobilization, manpower, equipment, tools & tackles and all other incidental cost. work schedule will be as per instruction of site engineer / eic.1 unit is for psp survey of all pipelines in 1 km of row. [ psp survey of all pipelines in 10km shall require 1 semiskilled manday ] 14 service assistance for mov / pcv actuator maintenance. actuators are of make biffi, rotork and auma. assistance in mov actuator maintenance, complete in all respect under the supervision of iocl personnel as per direction of eic. rates will be inclusive of boarding, lodging, local conveyance, mobilization & demobilization, manpower, equipment, tools & tackles and all other incidental cost. work schedule will be as per instruction of site engineer / eic.1 unit is for 1 mov actuator maintenance. maintenance of 10 mov actuator shall require 1 semiskilled manday ] 15 filtration of transformer oil by stream line filter machine provided by the contractor for improving the insulation strength of oil to the required strength as per specification given below ( excluding the supply of oil ) . a ) filtration of transformer oil till bdv as per instruction of eic is attained. b ) topping up of oil. c ) releasing all the air from air release plug & bucholz relay. d ) to and fro transportation of filter machine and equipments. e ) conducting transformer oil tests as mentioned in scope of work. 16 electrical composite items 17 caution board 18 supply and install caution boards for switchyard voltage system as per iss 2551 1963 complete in english / hindi / local language. 19 earthing plate 20 supply & installation of g.i. earthing plate outside the buildings. the item also includes grouting of the plate. the item should be complete in all respect including all materials, tools, tackels etc. and as per direction of eic / site engineer. 21 earth strip / wire / rope / cable supply, installing and testing of earthing strip / wire / rope / cable for completely making the earthing grid system by supplying, laying the gi / cu strip and making all the necessary welding joints, connecting to the earthing electrodes and existing earthing grid etc., complete as per directions of the site engineer / engineer in charge, including the cost of all labour, tools, materials, etc. complete in all respect: 22 50 mm x 6 mm g.i. earthing strip 23 40 mm x 5 mm g.i. earthing strip 24 25mm x 4 mm copper flat 25 25mm x 3 mm copper flat 26 gi wire ( 8 swg ) 27 gi wire / rope 35 sq. mm 28 gi wire / rope 10 mm diameter 29 copper cable as per specifications 100 sq.mm 30 copper cable as per specifications 10 sq.mm 31 earthing grid ( gi strip ) : supply, installation and testing of 75 mm x 10 mm gi earthing strip for completely making the earthing grid system by supplying, laying the g.i. strip and making all the necessary welding joints, connecting to the earthing electrodes and existing earthing grid etc. complete in all respects including consumables, tools / equipments and labour as per directions of engineer in charge / site engineer. 32 earthing electrode 33 supplying, installation, testing of gi earthing electrode including the supply and installation of the g.i. cover, charcoal etc. complete in all respects including consummables, tools / equipments and labour as per directions of engineer in charge / site engineer. 34 pvc conduit pipes supply, installation, fixing in position, pvc conduit pipes, of isi marked , in concrete, brick work etc. during or after construction by making grooves in the wall, ceiling etc. cutting threads and jointing the pipes with pvc couplers, providing necessary tees, bends, junction boxes etc. with 12 swg gi wire inside conduit without joint for concealed wiring, including making good the concrete, brick work, surfaces etc. complete as per direction of site engineer / engineer in charge including cost of all labour, materials etc.: 35 19 mm 36 25 mm 37 32 mm 38 supply & fixing of pvc conduit on surface: supply and fixing of following size of pvc conduit along with the accessories in surface including cutting the wal land making good the same in case of reessed, conduit as required: note: only isi marked conduits shall be used. 39 20 mm 40 25 mm 41 32 mm 42 40 mm 43 50 mm 44 supply & fixing of pvc casing / caping: providing and fixing following size of pvc casing and capingon surface as required. note: only isi marked caping and casing shall be used. 45 15 mm x 10 mm 46 20 mm x 10 mm 47 25 mm x 10 mm 48 30 mm x 10 mm 49 40 mm x 20 mm 50 50 mm x 20 mm 51 supply & fixing chequered plates 52 supply, installation and fixing of ms chequered plates of 5mm thickness. job includes cutting to size, supply of hinges / hooks for lifting, tag welding with support wherever required, painting including supply of paint, supply of all material and labor complete in all respect 53 hard stone laying ( sw yard ) : providing and spreading 40mm size approved hard stone chips around transformer yard in one layer of 100mm thick. job includes dressing of soil surface and laying the aggregate in uniform laying and density as per direction of site engineer aggregate shall be measured in boxes of size 1.1 / 2m x 1.1 / 2m x 1.1 / 2m which shall be taken as 1m3. the boxes will be supplied by contractor free of charge for measuring purpose. 54 supply of 40mm size stone chips per m3 55 spreading the stone chips per m3 56 putty application 57 application of pvc putty / m seal putty on lighting fixtures / jn. boxes / glands / switch boards etc. to avoid entering water / insects / any other type of things as per direction of the engineer in charge. note: putty will be supplied by owner free of cost. 58 supplying and fixing of gi route marker 59 suppplying cable route marker with 10 cm x 10 cm x 5 mm thick gi plate with inscription thereon, bolted / welded to 35 mm x 35 mm x 6 mm angle iron, 60cm long and fixing the same in ground as required. job includes painting with one coat of redoxide and finishing paint. 60 33kv ( e ) / 22 kv ( ue ) heat shrinkable straight through pvc / xlpe armoured aluminium cable jointing ( including cost of jointing kit ) : making straight through cable joint for power ( pvc / xlpe ) armoured cable and following sizes and grade including cutting, stripping of cable insulation all complete with labour including travel, transportation, boarding and lodging of the cable jointer and materials excluding cost of jointing kit as per standard and direction of the engineer in charge. note: work to be done in timeline as mentioned in tender document. 61 3 x 400 sqmm 62 salt and charcoal for plate earthing: extra for using below given salt and charcoal for plate earthelectrode as required. 63 96 kg charcoal and 5 kg salt 64 240 kg coke and 5 kg salt 65 salt and charcoal for pipe earthing: extra for using below given salt and charcoal for pipe earth electrode as required. 66 64 kg charcoal and 5 kg salt 67 160 kg coke and 5 kg salt 68 provide first aid boxes 69 supply and fixing of first aid boxes as per ie rules, 1956 clause 43 ( 2 ) , including necessary clamps, bolts, rawl plugs, etc. breachking and making good the walls if required. all complete with labour and materials as per the direction of engineer in charg 70 fire buckets 71 supply and installation of set of 3 nos. fire buckets on a suitable stand including fabrication and erection of iron stand and painting of stand and buckets, all complete with labour and materials as per the direction of engineer in charge 72 providing and fixing following rating metal clad, tp&n switch fuse unit, 415 / 500 volts, without h.r.c. fuses including drilling holes on the board, connections, earthing the body etc. as required. 1.isi marked hrc fuses shall be used. 2.tpn of english electric / l&t / crompton / havells / standard make shall be used. 73 16 a tpn hrc sfu 74 32 a tpn hrc sfu 75 63 a tpn hrc sfu 76 100 a tpn hrc sfu 77 l series mcb suitable for lighting and other domestic loads: supplying and fixing of following rating 240 volts, 50hz, 10ka l series, miniature circuit breacker ( suitable for lighting and other domestic loads and conforming to is 8828: 19 ) of single poles in the existing mcb db complete with connections, testing and commissioning etc. as required. note: isi marked mcbs of havells / loadster / indo kopp make shall be used. 78 5 to 32 amp 79 40 amp 80 5 a to 32 a g series mcb suitable for motorl and other inductive loads: supplying and fixing 5 amps. to 32 amps. rating, 240 / 415 volts, 50hz, 10ka g series, miniature circuit breaker ( suitable for motor and other inductive loads and conforming to is 8828: 1996, iec 60898: 2002 ) of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. note: isi marked mcbs of havells / loadster / indo kopp make shall be used. 81 single pole 82 single pole and neutral 83 double pole 84 triple pole 85 triple pole and netural 86 four pole 87 40 a to 63 a g series mcb suitable for motorl and other inductive loads: supplying and fixing 40 amps. to 63 amps. rating, 240 / 415 volts, 50hz, 10ka g series, miniature circuit breaker ( suitable for motor and other inductive loads and conforming to is 8828: 1996, iec 60898: 2002 ) of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. note: isi marked mcbs of havells / loadster / indo kopp make shall be used. 88 single pole and neutral 89 double pole 90 triple pole and netural / 4 pole 91 sp & dp mcb isolator: supplying and fixing following rating, single pole & double pole isolator in the existing mcb db complete with connections, testing and commissioning etc. as required. note: isi marked isolators shall be used. 92 40 amps. single pole 93 63 amps. single pole 94 40 amps. double pole 95 63 amps. double pole 96 80 amps. double pole 97 100 amps. double pole 98 125 amps. double pole 99 tp & fp mcb isolator: supplying and fixing following rating, three pole and four pole, 415 volts, isolator in the existing mcb db complete with connections, testing and commissioning etc. as required.note: isi marked isolators shall be used. 100 40 amps. triple pole 101 63 amps. triple pole 102 80 amps. triple pole 103 100 amps. triple pole 104 125 amps. triple pole 105 40 amps. four pole 106 63 amps. four pole 107 80 amps. four pole 108 100 amps. four pole 109 125 amps. four pole 110 double pole rccb: supplying and fixing following rating, double pole, ( single phase neutral ) , 240 volts, residual current circuit breaker ( rccb ) , isi marked, having a sensitivity current indicated miliamperes in the existing mcb db complete with connections, testing and commissioning etc. as required.note: isi marked rccb shall be used. 111 16 amps., 30 ma 112 16 amps., 100 ma 113 16 amps., 300 ma 114 25 amps., 30 ma 115 25 amps., 100 ma 116 25 amps., 300 ma 117 32 amps., 30 ma 118 32 amps., 100 ma 119 32 amps., 300 ma 120 40 amps., 30 ma 121 40 amps., 100 ma 122 40 amps., 300 ma 123 63 amps., 30 ma 124 63 amps., 100 ma 125 63 amps., 300 ma 126 four pole rccb: supplying and fixing following rating, four pole, ( three phase and neutral ) 415 volts, residual current circuit breaker ( rccb ) , isi marked, having a sensitivity current upto indicated milliamperes in the existing mcb db complete with connections, testing and commissioning etc. as required. note: isi marked rccb shall be used 127 25 amps., 30 ma 128 25 amps., 100 ma 129 25 amps., 300 ma 130 40 amps., 30 ma 131 40 amps., 100 ma 132 40 amps., 300 ma 133 63 amps., 30 ma 134 63 amps., 100 ma 135 63 amps., 300 ma 136 supply & instln. of fuse parts: supply, fixing and connection of following knife type hrc fuse link as per is:13703:1993 & iec 269:1986 of m / s havell / l&t / g ec astholm / standard / mds make or approved equivalent in distribution board etc.all complete with labour and materials as per direction of engineer incharge. 137 knife type 6 100 amp ( fcd00 series ) 138 knife type 125 amp ( hcd00 series ) 139 knife type 32 125 amp ( hcd 1 series ) 140 bolted type 2 32 amp ( hns series ) 141 boltedtype 6 32 amp ( htia series ) 142 boltedtype 80 125amp ( htsd series ) 143 supply and fixing of equipment in panels: supply, fixing and connection of following equipments in panels including small mechanical works and supply of all fixing materials. all complete with labour and materials as per the direction of engineer in charge 144 control contactors 4 contacts for ac control standard coil voltage 25, 110, 240, 415, 50hz type mm00 of l&t equivalent 145 control contactors 8 contacts for ac control standard coil voltage 25, 110, 240, 415, 50hz type mm01 of l&t equivalent 146 control contactors 4 contacts for dc control standard coil voltage 24, 110, 220 type mm00 of l&t or equivalent 147 control contactors 4 contacts for dc control standard coil voltage 24, 110, 220 type mm01 of l&t or equivalent 148 power contactor ( with 1no + 1nc ) upto 25 amp ( ac3 ) for ac standard coil voltage 110, 220, 240, 415 v, 50hz type mnx25 of l&t or equivalent 149 power contactor ( upto 2no + 2 nc ) above 25 amp but upto 45 amp ( ac3 ) for ac standard coil voltage 110, 220, 240, 415 v, 50hz type mnx45 of l&t or equivalent 150 power contactor ( upto 2no + 2 nc ) above 45 amp but upto 140 amp ( ac3 ) for ac standard coil voltage 110, 220, 240, 415 v, 50hz type mnx140 of l&t or equivalent 151 power contactor ( upto 2no + 2 nc ) above 140 amp but upto 400 amp ( ac3 ) for ac standard coil voltage 110, 220, 240, 415 v, 50hz type mnx400 of l&t or equivalent 152 thermal relays type mnxr3 with single phasing protection 0.2 0.33 a to 14 23a ( direct operated ) 153 thermal relays type mnxr4 with single phasing protection 20 33 to 30.0 50.0 a ( direct operated ) 154 thermal relays type mnxr4 with single phasing protection 45 75 to 66 110 a ( direct operated ) with separate mounting 155 thermal relays type mnxr5l with single phasing protection 42 69 a to 180 300 a ( ct operated ) with separate mounting 156 thermal relays type ml0 / ml1 / ml1.5 0.15 0.25 a to 10.0 16.0 a ( direct operated ) contractor 157 thermal relays type ml2 / ml3 9.0 14.0 a to 28.0 42.0 a ( direct operated ) contractor 158 shrouded push button actuator of l&t make tk 3 ( ss 91519 ) or approved equivalent of any color ( green, black, red, yellow, grey or blue ) . 159 automatic ac ammeter ( automatic electric make or approved equivalent ) 96 mm x 96 mm square type block backalite case / flush mounting / moving iron / spring controlled suppressed scale, ct operated ac ammeter / range 0 300 1800 a, ct ratio 300 / ia / accuracy + / 2.5%. 160 automatic ac volt meter ( automatic electric make or approved equivalent ) 96 mm x 96 mm square type block backalite case / flush mounting ac volt meter / range 0 600 accuracy + / 2.5%. 161 installation of current transformer of any rating 162 timer for auto lux switch 163 supply and installation of timer of approved make for autolux switch as per secpfication and direction of the engineer in charge 164 rcbo: supply, fixing and connection of following 240 / 415v, 50hz, with 10ka short circuit capacity residual current circuit breaker with overload and short circuit protection ( confirming to is 12640 2:2001 & iec 61009 2 1 ) of l&t / gec astholm / standard / mds / datar / havles make or approved equivalent in distribution board etc. all complete with labour and materials as per direction of e i c 165 double pole ( four module 25 a ( sensitivity 30 ma ) 166 double pole ( four module 25 a ( sensitivity 100 ma ) 167 double pole ( four module 25 a ( sensitivity 300 ma ) 168 double pole ( four module 40 a ( sensitivity 30 ma ) 169 double pole ( four module 40 a ( sensitivity 100 ma ) 170 double pole ( four module 40 a ( sensitivity 300 ma ) 171 supply & installation of mccb: supply & installation of m / s l&t / english electric / siemens make t.p. molded case circuit breaker ( mccb ) ( confirming to is 8828:1996, iec 60898:2002 ) of following current and breaking capacity rating suitable for 415v, 3ph, 50 c / s ac supply must be accompanied with performance test certificates from manufacturer. the mccb should be supplied with thermal overload relay and magnetic release. 172 10 / 15 / 20 / 30 / 40 / 50 / 60 / 63 / 75 / 90 / 100 a with icu = 10ka 173 110 / 125 / 140 / 150 a with icu = 10ka 174 125 / 140 / 150 / 160 / 175 / 200 / 225 a with icu = 25ka 175 250 / 300 / 350 / 400 a with icu = 35ka 176 supply & installation of led indication lamps: supply and fixing of led indication lamp in the panels. leds shall be provided with leakage voltage protection upto 40v. operating voltage shall be 110v / 220v / 230v / ac / dc, panel cutouts shall be 22.5 / 25.5 / 30.5 mm. terminals shall be shrouded for finger proofing and safety are with captivated washers to hold two lugged ( fork / pin ) wires in one terminal. job includes supply of labor and various undry materials required and finally testing of leds for + following eds 177 red / yellow / amber / green / milky white leds 178 blue led 179 supply & instln. of industerial type plug and sockets : supply, fixing and connection of following inusterial type plugs / sockets ( confirming to is / iec 309 ) of m / s havell / l&t / g ec astholm / standard / mds make or approved equivalent in distribution board etc.all complete with labour and materials as per direction of engineer in charge 180 plug 2 pole+ earth, 250v 20 amp 181 plug 3 pole+ earth, 440v 20 amp 182 socket 2 pole+ earth, 250v 20 amp 183 socket 3 pole+ earth, 440v 20 amp 184 supply and fixing of recessedmetal boxes with phenolic sheet: supply and fixing of metal box of following size ( nominal ) in recess with suitable size of phenolic laminated sheet cover in the front including painting etc. as required. 185 75 mm x 75 mm x 60 mm deep 186 100 mm x 100 mm x 60 mm deep 187 150 mm x 75 mm x 60 mm deep 188 150 mm x 150 mm x 60 mm deep 189 180 mm x 100 mm x 60 mm deep 190 200 mm x 125 mm x 60 mm deep 191 200 mm x 150 mm x 60 mm deep 192 200 mm x 150 mm x 75 mm deep 193 200 mm x 250 mm x 75 mm deep 194 200 mm x 150 mm x 100 mm deep 195 gi cable tray 196 supply, installation & fixing of prefabricated perforated gi cable trays with tray cover of width 150 mm, 300 mm, 450 mm & 600 mm as per site requirement for laying of cables with standard rung spacings. load for support span of 2.5 meter as 30, 60, 75 & 90 ( in kg / mtr ) respectively with concentric static load as 70 kg at the centre, with materials, labour, tools and tackles, consumables etc , as per directions of site engineer / engineer in charge. 197 aluminium cable tray 198 supply, installation & fixing of prefabricated perforated aluminium cable trays with tray cover of width 150 mm, 300 mm, 450 mm & 600 mm as per site requirement for laying of cables with standard rung spacings. load for support span of 2.5 meter as 30, 60, 75 & 90 ( in kg / mtr ) respectively with concentric static load as 70 kg at the centre, with materials, labour, tools and tackles, consumables etc , as per directions of site engineer / engineer in charge. 199 supply erection and installation of cable conduits made up of gi pipes of medium class, subject to owners approval, in already made trenches, on walls, concrete structures etc. including supply and installation of all the necessary pipe fittings such as bends, sockets, elbows, tees, etc. the job also includes bending, threading, binding, clamping, providing spacere, plugs, packings, bushing etc. as required for laying of cables, complete in all respects including consumables, tools / equipments and labour a per directions of engieer in charge / site engineer. 200 gi pipe with diameter 20 mm 201 gi pipe with diameter 25 mm 202 gi pipe with diameter 37 mm 203 gi pipe with diameter 100 mm 204 ht cable termination ( 6.6 / 11 kv ) supply, termination and connection of xlpe cable termination kit ( indoor type ) , heat shrinkable sleeve type of raychem / m seal / cci make with all accessories, including cutting ( tools and accessories for termination should meet the selected standards ) , stripping of cable insulation providing copper cable end lugs and cable glands as required, restoration of insulation, supplying and providing the cable supporting clamps, straps, cable tags connection to the terminals of ht panel, vfds, isolators, transformer, dg, mlpu / booster pump motors etc., earthing of armouring, materials, labour, tools and tackles, consumables etc , as per directions of site engineer / engineer in charge: 205 ht cable of size above 3cx240 sq. mm 206 ht cable of size upto 3cx240 sq. mm 207 lt cable end termination for armoured pvc insulated aluminium cable with doublecompression flame proof type brass glanding ( including cost of glands & lugs ) : providing end termination of power / control cable including cutting, stripping, providing & fixing lugs, cable insulation, providing & glanding double compression heavy duty flame proof type brass cable gland conforming to is 12943 ( dowells or approved equivalent ) , wherever specified, providing aluminium lugs, crimping / soldering, as necessary, restoration of insulation / clamping of cable, tagging with aluminium tag, earthing of armour, connection to the equipment terminals etc. all complete with labour and materials as per standard and direction of the engineer incharge 208 2 x 6 sqmm 209 2 x10sqmm 210 2 x16sqmm 211 3 x 4 sqmm 212 3 x 6 sqmm 213 3 x 10 sqmm 214 3 x 16 sqmm 215 3 x 25 sqmm 216 3 x 35 sqmm 217 3 x 50 sqmm 218 3 x 70 sqmm 219 3 x 95 sqmm 220 3 x 120 sqmm 221 3 x 150 sqmm 222 3 x 185 sqmm 223 3 x 225 sqmm 224 3 x 240 sqmm 225 3 x 300 sqmm 226 3 1 / 2 x 25 sqmm 227 3 1 / 2 x 35 sqmm 228 3 1 / 2 x 50 sqmm 229 3 1 / 2 x 70 sqmm 230 3 1 / 2 x 95 sqmm 231 3 1 / 2 x 120 sqmm 232 3 1 / 2 x 150 sqmm 233 3 1 / 2 x 185 sqmm 234 3 1 / 2 x 225 sqmm 235 3 1 / 2 x 240 sqmm 236 3 1 / 2 x 300 sqmm 237 lt cable heat shrinkable indoor / outdoor cable end termination ( including cost ofend termination kit ) : providing end termination of power cable including cutting, stripping, providing lugs, cable insulation, providing and glanding with single / double compression heavy duty brass cable gland conforming to is 12943 , wherever specified, providing aluminium lugs, crimping / soldering, as necessary, restoration of insulation / clamping of cable, tagging with aluminium tag, earthing of armour, connection to the equipment terminals etc. all complete with labour and materials as per standard and direction of the engineer in charge. make of kits shall be of raychem / cci / approved equivalent make 238 upto 3 / 3.5 / 4 x 10 sqmm 239 3 / 3.5 / 4 x 16 sqmm 240 3 / 3.5 / 4 x 25 sqmm 241 3 / 3.5 / 4 x 35 sqmm 242 3 / 3.5 / 4 x 50 sqmm 243 3 / 3.5 / 4 x 70 sqmm 244 3 / 3.5 / 4 x 95 sqmm 245 3 / 3.5 / 4 x 120 sqmm 246 3 / 3.5 / 4 x 150 sqmm 247 3 / 3.5 / 4 x 185 sqmm 248 3 / 3.5 / 4 x 225 sqmm 249 3 / 3.5 / 4 x 240 sqmm 250 3 / 3.5 / 4 x 300 sqmm 251 ht cable joint 252 making straight through joint on 6.6 / 11 kv aluminium / copper xlpe / pvc insulated armoured screened cable, including the supply of required materials such as cable jointing kit ( of heat shrinkable sleeve type of raychem / m seal / 3m ) , materials, labour, tools and tackles, consumables etc , as per directions of site engineer / engineer in charge: for cables of size upto 3 core x 400 sqmm 253 lt cable joint ( 1.1 kv ) making straight through joints on al / cu conductor xlpe / pvc insulated armoured cable including the supply of required materials such as cable jointing kit ( of heat shrinkable sleeve type of raychem / mseal / 3m ) , materials, labour, tools and tackles, consumables etc , as per directions of site engineer / engineer in charge: 254 power cables lt : od upto 20 mm 255 power cables lt : od above 20 mm and upto 40 mm 256 power cables lt : od above 40 mm and upto 60 mm 257 power cables lt : od above 60 mm 258 control cables lt : od upto 20 mm 259 earthing system set ( 06 pits ) 260 supply, installation, testing of earthing system consisting of 6 earth pits of perforated gi pipes earthing electrodes and copper plate terminal block including construction of chamber using cement concrete with earthing pit cover and frame, supply of charcoal, salt etc including supply of interconnecting cables / strips including necessary welding etc complete as per directions of the site engineer, including cost of tools, materials etc complete in all respects. the job shall also include testing of each earth pit and the entire earthing system on whole. ( note: earthing for field instruments shall be provided from station earth grid covered in electrical sor. ) 261 earthing system set ( 03 pits ) 262 supply, installation, testing of earthing system consisting of 3 earth pits of perforated gi pipes earthing electrodes and copper plate terminal block including construction of chamber using cement concrete with earthing pit cover and frame, supply of charcoal, salt etc including supply of interconnecting cables / strips including necessary welding etc complete as per directions of the site engineer, including cost of tools, materials etc complete in all respects. the job shall also include testing of each earth pit and the entire earthing system on whole. ( note: earthing for field instruments shall be provided from station earth grid covered in electrical sor. ) 263 chemical earthpit 264 supply, installation, testing and commissioning of ace ( artificial concept of earthing with chemical rod ) chemrod earthing electrode by digging earthing item includes the supply and installation of the ci / rcc cover in the earth pit, backfilling etc. and construction of chamber; complete including excavation, backfilling and supply of all materials required for making earth pit as per directions of the site engineer, including the cost of all labour, tools, materials etc. complete in all respects. 265 lightining arrestor 266 supply, installation and testing of lightning arrestor on top of the mov buiding or mov cp buiding for diverting lightning surges to the ground. the work shall include supply of 1.2 meter long copper lightning arrestor with 5 spronged phenyl rod base plate etc. complete with necessary insulators including supply and fixing of 50 x 6 mm gi earthing strip of required length and connection to the main earthing grid. 267 rewiinding of fans: rewinding of ceiling / pedestal / exhaust / air circulator fans of all types / sizes / make including 1 phase and 3 phase type exhaust fans max. upto 2.2 kw capacity and supply of super enameled winding wire ( devi dayal make, isi marked insulation materials required ) . this also includes replacement of single / double bearing skf make / bushes ( as per original make ) and overhauling of fan and all jobs related to complete this work in totality. this also includes removal of fans from site, installation and commissioning after testing of rewound fans and replacement of condenser, if required. this also includes transportation from site after dismantling to contractor’s workshop and back to site. note: contractor has to give guarantee for rewinding of above items for a period of six months and if winding is burnt again within six months of working of fans, it has to be rewound again free of cost of contractor. the burnt winding shall be kept by contractor. 268 ceiling / pedestal fans 269 exhaust / air circulators fans. 270 overhauling of exhaust / air circulator fans : overhauling of exhaust / air circulator fans of various types / sizes makes and its bearings including removal from site, cleaning, greasing after degreasing, assembling and fixing in position, testing and commissioning including transportation from site to workplace and back all complete with labour and materials as per directions of engineer incharge. 271 excluding the cost of bearings ( bearings if necessary will 272 including supply and fixing of bearings of skf make ( 2nos. bearings ) 273 overhauling of ceiling / pedestal fans : overhauling of ceiling / pedestal fans of various types / sizes / make and its bearings including removal from site, cleaning, greasing after degreasing, assembling and fixing in position, testing and commissioning including transportation from site to workplace and back. all complete with labour and materials as per directions of engineer incharge. 274 excluding the cost of bearings. ( bearings if necessary will be supplied by owner free of cost. 275 including supply and fixing of bearings of skf make and bushes ( as per original make ) of both sides by contractor. 276 erection of metallic street light: erection of metallic steet light standard of following length in cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation with cement concrete collar of size 0.4 m dia x 0.5 m height to accommodate the looping type cable end box including excavation and refilling etc. as required. 277 4.5 m but upto 6.5 m 278 6.5 m but upto 8 m 279 supply, erection and installation of strain insulators, post insulators, acsr dog conductor, connectors, shield wire, etc for outdoor switchyard. the job also includes assembling as required, installation on already made concrete foundations or fixing to walls or steel structures or fixtures, aligning, levelling, groutting assembling and fittings all accessories etc. supplied separately, complete in all respects including consumables tools / equipments and labour as per directions of engieer in charge / site engineer. 280 strain insulators for 33 kv 281 acsr dog conductors for 33 kv 282 connectors for 33 kv 283 shield wire for 33 kv 284 post insulators for 33 kv 285 supply and fixing of street light bracket with controlling switch 286 supplying and fixing of 20mm dia. g.i. pipe for street light water tight bracket including bending to shape, 40mm x 3mm flat iron clamps and wiring with 1.5 sq.mm. w.p. / pvc wire alongwith water proof controlling switch and painting the flat iron with primer and finish paint etc. as required. 287 33 kv stay set 288 supplying and erection of galvanised stay set for 33 kv overhead line complete with 19 / 20mm. dia x 1.8 metres long stay road, anchor plate of size 45 mm x 45 cm x 7.5 mm thick thimble, stay clamps, turn buckle ( 20mm x 600mm ) , 7 / 4.00mm. dia g.i. stay wire and 33 kv strain insulator etc. in cement concrete 136 ( 1 cement 3 coarse sand 6 graded stone aggregate 40mm. nominal size ) foundation including excavation and refilling etc. as required. 289 louvers / shutters of exhaust fan 290 fixing of louvers / shutters complete with frame for exhaust fan of all sizes 291 supplying and fixing ceiling fan: supply, installation, testing & commissioning of ceiling fans of bajaj / crompton greaves / khaitan / usha make only including supply and fixing of the electronic regulators with all necessary supports. all complete with labour and material, specification and direction of engineer in charge 292 1200mm sweep ( white ) 293 1400mm sweep ( white ) 294 supplying and fixing wall mounted fan: supply, installation, testing and commissioning of wall mounted fans of bajaj / cromptonreaves / khaitan / usha make only including supply and fixing of the electronic regulators with all necessary supports. all complete with labour and materials as per directions of engineer in charge.. note: necessary civil works required for fixing the exhaust fans shall be in the scope of contractor. 295 osc. wall & cabin fans of 300mm sweep 296 osc. wall & cabin fans of 450mm sweep 297 steel structural works 298 supply, fabrication, erection, installation of steel structural works of any type and shape such as cable raks, cable trays, push button control posts etc., as required job complete in all respects including the cost of all labour, tools, material etc., complete.and as per specifications and directions of site engineer / engineer in charge. 299 flp / wp push button station supply , erection, testing and commissioning of flp / wp push button ( on / off ) control station of approved make with / without ammeter for the motor off control at field including connection and termination of copper control cable, fabricating, earthing the supporting structure, painting the same, including supply & installation of double compression cable glands & flame proof plugs for sealing all spare entries including the cost of all labour, tools, materials etc. complete in every respect as per the specification and directions of the site engineer / engineer in charge including the cost of all labour, tools, materials etc. complete in every respect as per the specification and directions of the site engineer / engineer in charge: 300 with ammeter 301 without ammeter 302 flame proof fittings all equipment under this category shall be suitable ( minimum requirments ) for location in zone i gas group iia & iib ( temp. class t3 ) area with a separate terminal box for incoming cable and a separate terminal box for out going cable ( where applicable ) , apart from separate enclosure for each equipment including control gear etc. in ip 65 cast aluminium lm 6 certified enclosure: 303 flameproof tubelight, 2x22watt, led, suitable for exd gas group ii c, as per is / iec 60079 2007 304 flameproof led well glass fitting 90 w, supply, installation, testing & commissioning of exd ( flameproof ) well glass light fixture with provision of cable entries: 2 nos. x 3 / 4 et, cable glands: 2 nos. x 3 / 4 et ( max. od 20mm ) exd ( iia / iib ) , double compression type, brass nickel plated with pvc hood. blanking plug: 1 no. x 3 / 4 et exd, brass nickel plated. gasket: neoprene, hardware: ss 304, earthing: external 2 nos. ( m6 ) , internal 1 no. ( m5 ) , and as per directions of eic. 305 flameproof led flood light fitting 90 w, supply, installation, testing & commissioning of exd ( flameproof ) flood light fixture with provision of cable entries: 2 nos. x 3 / 4 et, cable glands: 2 nos. x 3 / 4 et ( max. od 20mm ) exd ( iia / iib ) , double compression type, brass nickel plated with pvc hood. blanking plug: 1 no. x 3 / 4 et exd, brass nickel plated. gasket: neoprene, hardware: ss 304, earthing: external 2 nos. ( m6 ) , internal 1 no. ( m5 ) , and as per directions of eic. 306 flameproof led flood light fitting 45 w, supply, installation, testing & commissioning of exd ( flameproof ) flood light fixture with provision of cable entries: 2 nos. x 3 / 4 et, cable glands: 2 nos. x 3 / 4 et ( max. od 20mm ) exd ( iia / iib ) , double compression type, brass nickel plated with pvc hood. blanking plug: 1 no. x 3 / 4 et exd, brass nickel plated. gasket: neoprene, hardware: ss 304, earthing: external 2 nos. ( m6 ) , internal 1 no. ( m5 ) , and as per directions of eic. 307 flameproof led well glass fitting 125 w, supply, installation, testing & commissioning of exd ( flameproof ) well glass light fixture with provision of cable entries: 2 nos. x 3 / 4 et, cable glands: 2 nos. x 3 / 4 et ( max. od 20mm ) exd ( iia / iib ) , double compression type, brass nickel plated with pvc hood. blanking plug: 1 no. x 3 / 4 et exd, brass nickel plated. gasket: neoprene, hardware: ss 304, earthing: external 2 nos. ( m6 ) , internal 1 no. ( m5 ) , and as per directions of eic. 308 critical light: flame proof & weather proof supply, erection ( fixing the same on roof truss, wall, column etc. as required ) , termination of 240v, flame proof light fittings with heat resistant glass diffuser and suitable for led lamp, ip65, of model pel 111 prolite make or equivalent approved makes as per eic. the job includes the cost of fitting and erection 1 no. led lamp 18w, ni cd battery of suitable size for minimum 01 hour back up, battery charger, earthing, supply & erection of all accessories, suitable ms brackets etc. complete. 309 flp & wp junction box supply, erection, installation, testing and commissioning of flameproof & weather proof junction box for providing cable termination of motor, including connection and termination of earthing wire and conduits etc., including supply & installation of double compression cable glands & flame proof plugs for sealing all spare entries complete as per direction of the site engineer, including the cost of all labour, tools, consumable materials etc., complete in all respect: 310 8 way junction box with 8 cable entries ( 1 x 1 & 7 x 3 / 4 ) at bottom & 20 nos. terminals. 311 6 way junction box with 6 cable entries ( 6 x 3 / 4 ) at bottom & 20 nos. terminals. 312 4 way junction box with 4 cable entries ( 4 x 3 / 4 ) at bottom & 20 nos. terminals. 313 exhaust fan supply, installation, testing of single phase 230 v, industrial type heavy duty exhaust fan of gec / usha / crompton greaves or of approved make fitted / provided with louvres, supports etc. including making the required opening on walls, fixing and connecting the wires etc. including earthing the body of the fan, making good the opening on the wall etc. complete as per direction of site engineer including the cost of all labour, tools, materials etc. complete. 314 18 sweep 315 12 sweep 316 flp / wp exhaust fans: 317 flame proof, weather proof, single phase, 12 exhaust fan, ip65, lm6 type ef1001 of fcg or equivalent alongwith supporting frame, bolts, louvers, flame proof motor, including supply & installation of double compression cable glands & flame proof plugs for sealing all spare entries, complete in all respects 318 flame proof, weather proof, single phase, 12 exhaust fan, suitable for exd gas group ii c, as per is / iec 60079 2007, ip65, lm6 type ef1001 of fcg or equivalent alongwith supporting frame, bolts, louvers, flame proof motor, including supply & installation of double compression cable glands & flame proof plugs for sealing all spare entries, complete in all respects 319 flp / wp rotary switch: 320 supply, installation, testing & commissioning of flame proof weather proof on / off rotary switch , ip65, lm6, including including supply & installation of double compression cable glands & flame proof plugs for sealing all spare entries etc., complete in all respects. 321 flp / wp distribution boards supply, erection, installation, testing and commissioning of flameproof / weather proof ( ip 65 ) distribution board as per technical specification of types as per eic for lighting purpose in mlpu / booster shed etc., including connection and termination of power cables, earthing wire and conduits etc. including including supply & installation of double compression cable glands & flame proof plugs for sealing all spare entriescomplete as per direction of the site engineer, including the cost of all labour, tools, consumable materials etc. complete in all respect: 322 outdoor type, floor mounted, flameproof, weatherproof ( ip 65 ) lighting distribution board type i db with bus bar 100 a tpn, incomer 1 no. 63 a tpn mcb & outgoing 9 no. 10 a spn, mcb 323 outdoor type, floor mounted, flameproof, weatherproof ( ip 65 ) lighting distribution board type ii db having bus bar 100 a tpn, incomer 1 no. 32 a tpn mcb & outgoing 3 no. 6 a spn mcb 324 flp / wp switch cum socket supply, erection, installation, testing and commissioning of flameproof / weatherproof switch cum socket / welding receptacle of approved makes to be installed on walls, coloumns, structures, including supply & installation of double compression cable glands & flame proof plugs for sealing all spare entries etc., including connection and termination of earthing wire and conduits., etc. complete as per direction of the site engineer, including the cost of all labour, tools, consumable materials etc. complete in all respect: 325 250v, 15 a switch cum socket with plug 326 250v, 63 a plug & welding receptacle 327 415v, 63a, switch & socket with plug ( no. of pins 3p +n+ e ) , model epss 1563 61 of baliga or equivalent approved make 328 wp 6 way junction box: 329 supply, erection, installation, testing and commissioning of weather proof 6 way junction box of approved make for providing cable termination & including connection and termination of earthing wire and conduits, including supply & installation of cable glands & plugs for sealing all spare entries etc. complete as per direction of the site engineer, including the cost of all labour, tools, consumable materials etc. complete in all respect. 330 wp push button station: 331 supply, erection, testing and commissioning of weather proof push button ( off ) control station of approved make for emergency transformer tripping at field including connection and termination of copper control cable, fabricating, earthing the supporting structure, painting the same, including supply & installation of cable glands & plugs for sealing all spare entries including the cost of all labour , tools, materials etc. complete in every respect as per the specification and directions of the engineer in charge. 332 stainless steel inscription plate : 333 supply and installation of approved quality stainless steel name inscription plates including anodising, engraving the inscriptions, providing screws, etc. for equipments viz. motors, motor control centres, switchgears, push button stations etc. as required, providing necessary holes tapping etc. and fixing the same complete in all respect as per the direction of site engineer / engineer in charge including the cost of all labour, tools etc. 334 plastic inscription plate : 335 supply and installation of approved quality plastic name inscription plates including engraving the inscriptions, providing screws, etc. for equipments viz. motors, motor control centres, switchgears, push button stations etc. as required, providing necessary holes tapping etc. and fixing the same complete in all respect as per the direction of site engineer / engineer in charge including the cost of all labour, tools etc. 336 point wiring supplying, installation and testing with 1.5 sq.mm stranded pvc insulated copper conductor wires for phase & neutral of 650v grade including earthing by providing 1.5 sq.mm earth insulated continutity wire of copper in pvc conduit ( supply & installation of pvc conduit covered elsewhere in sor ) recessed on wall / ceiling / false celing including supply & installation of switch boxes, junction boxes, pull boxes, bushes, screws, check nuts, bends, modular switches and sockets . the circuit wiring with 4 sq.mm pvc copper wire from d.b. to switchboard as required is also in the scope of the contractor: 337 1 light point controlled by 1 switch 338 16 a power plug point wiring: 339 wiring for 250 v single phase and neutral 16 amps modular power plug point with pvc insulated 4 sq. mm. copper conductor wires for phase & neutral, 650 v grade including earthing, the third pin with 2.5 sq. mm copper conductor earthing insulated continuity wire, complete with providing and fixing of 6 pin 16 / 6a modular socket and 20 / 10 a modular switch ( 1 plug point per circuit ) as per directions of site engineer. 340 6 a plug point wiring: 341 wiring for 250 v single phase and neutral 6 amps modular plug point with pvc insulated 2.5 sq. mm. copper conductor wires for phase & neutral, 650 v grade including earthing, the third pin with 1.5 sq. mm copper conductor earthing insulated continuity wire, complete with providing and fixing of 5 pin 6a modular socket and 10 a modular switch ( 1 plug point per circuit ) as per directions of site engineer. 342 ac point wiring: 343 point wiring for power plug point with 4 sq.mm stranded pvc insulated copper wire including earthing the third pin with 2.5 sq. mm copper insulated earthing wire complete with supply and fixing of recessed mounted industrial type 3 pin 32 a metal clad socket and plug, 20a mcb ( motor duty ) housed in a 16 gauge m.s. box 344 lighting distribution board / ac distribution board supply , installation, testing and commissioning of tpn lighting / ac distribution board of approved make, with rating and feeders as per specification. the db shall be of ip 42 protection class and shall conform to is 8623. the board shall be fitted with an acrylic door as per directions of site engineer: 345 type vi light db: euro db dboxx of havells or equivalent make complete with bus bar, neutral links, earth links along with 1 x 6 a mcb spn , 7x2 a spn mcb, digital time switch , 110 240 vac 1 phase 2w, 1 c / o, base / din based upon lat / long setting of location working according sunrise and sunset and mnx 9 2p power contactors 9 a 2 pole 1 no or 1 nc of l&t or equivalent. 346 critical light db: euro db dboxx of havells or equivalent make complete with bus bar, neutral links, earth links and 1 x 6 a mcb spn & 7x2 a spn mcb 347 decorative light fittings supply, installation, connection, earthing and testing of the following fittings, including supply and installation of drop pipes, hooks, fittings, fixtures, nuts, bolts, supports, on walls, outlet box for regulators and all other required materials etc. as per directions of the site engineer including cost of all labour, tools, materials etc. complete in all respects.make of the fittings can be the make mentioned in the respective sor items or equivalent model: 348 tube light fitting type quadra 2 bbs805 2 x llm 1800 / 840 psu e 220v 240v led luminaire of phillips or approved make, complete with all accessories suitable for mounting in false ceiling as per the directions by eic / site engineer. 349 led ceiling point: supply and fixing of surface mounted led ceiling light fitting type mainstream spot aura 15w of phillips or equivalent approved make complete with all accessories such as led module, driver, optics, thermal sink, connector blocks etc including installation. 350 wp endura led: supply and fixing of surface mounted weather proof endura led wt 550 light fitting of phillips or equivalent approved make complete with all accessories such as led module, driver, optics, thermal sink, connector blocks etc including installation. 351 supply and fixing of led wall light cat. no. 35022 9w fitting of phillips or equivalent approved make complete with all accessories such as led module, driver, optics, thermal sink, connector blocks etc including installation. 352 led light fittings, recess mounting type, sereno led rc869b led 30s 6500 pse w30l120 d8 or equivalent approved make with leds: supply and fixing of recess mounted weather proof light sereno led rc869b led 30s 6500 pse w30l120 d8 or equiavlent approved make with leds, 42 w or more, having 2950 lumens or more output. led fitting of phillips or equivalent approved make complete with all accessories such as led module, driver, optics, thermal sink, connector blocks etc including installation with led of approved make. 353 led light fittings with leds, sereno led suspended sp824 p led 30s 5000 gr od or approved equivalent:supply and fixing of surface mounted weather proof light sp824 p led 42 w having 2950 lumens output fitting of phillips or equivalent approved make complete with all accessories such as led module, driver, optics, thermal sink, connector blocks etc including installation with led of approved make. 354 led light fittings, batten with 2xtled tmc501 2x tled 36 w p3242 or equiavlent approved make with leds: supply and fixing of wall mounted / suspended type weather proof light 2xtled tmc501 2x tled or equiavlent approved make with leds, 36 w or more. led fitting of phillips or equivalent approved make complete with all accessories such as led module, driver, optics, thermal sink, connector blocks etc including installation with led of approved make. 355 wt550c led35scwpsu s1 pc: supply and fixing of surface mounted weather proof light wt550c led35scwpsu s1 pc led 42 w having 3500 lumens output fitting of phillips or equivalent approved make complete with all accessories such as led module, driver, optics, thermal sink, connector blocks, etc. including installation. 356 dn170c led10s 6500 psu wh: supply and fixing of surface mounted weather proof light dn170c led 15 w having 1000 lumens output fitting of phillips or equivalent approved make complete with all accessories such as led module, driver, optics, thermal sink, connector blocks etc including installation. 357 critical light: non flame proof type pel 240 m / sl of prolite or of approved make as per eic, with 2 x 18 w led tl / lamp including sealed lead acid battery of suitable size for minimum 01 hour back up, battery charger, for fire fighting pump shed, ht / lt room, battery room etc.the job includes connection of the fitting, 6a switch socket with 2c x 4 sqmm cable from db / switch board and as mentioned above including all accessories etc. complete in all respect as per direction of eic / site engineer. 358 all in one solar based led street light: 359 installation, testing, commissioning charges of all in one solar based led street light including supply of 5 m high gi pole ( with suitable panel mounting arrangement ) and associated civil foundation works complete in all respects. 360 supplying and laying reinforced cement concrete light duty hume pipe, non pressure type ( np3 ) , centrifugally cast conforming to i.s.458 with 1:3:6 concrete casing at joints as required with necessary slope including excavation, backfilling, supply of collars, jointing of pipes with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement: 2 fine sand ) , testing of joints, complete in all respects as per direction of the eic / site engineer: 361 300 mm dia 362 200 mm dia 363 sand filling 364 supplying and spreading of approved quality fine dry river sand in cable trenches including the cost of all material, transport, load and lift charges, labour, tools and tackles, consumables etc , as per directions of site engineer / engineer in charge 365 supply fixing and erection of modular cable transit ( mct ) for cable entry to building in proper frame including supply of peelable type, spare block, stay plates compression wedgs etc. with all accessories considering 20 % minimum spare in each module to be installed as per instruction of engineer in charge / site engineer: 366 galvanised mild steel frame with packing space of min.120x240 mm with multi diameter blocks and accessories with peeling off arrangement to adjust cable size from 3.5mm to 99mm outer dia 367 galvanised mild steel frame with packing space of min.120x180 mm with multi diameter blocks and accessories with peeling off arrangement to adjust cable size from 3.5mm to 99mm outer dia 368 brick soling 369 supply and laying of approved quality 75 mm. thick second class brick flat soling with sand filling in the interestices, in cable trenches for protection of laid cables in all respects including consumables, tools / equipments and labour as per directions of engieer in charge / site engineer. 370 outgoing mccb feeder as per instructions of engineer in charge 371 feeder rating 32a 372 outgoing sfu feeder as per instructions of engineer in charge 373 feeder rating 32 / 32a 374 flood light luminaires with separate c.g. box including cost of lighting fixtures: supply, installation, connection and testing of following flood light luminaries of philips / approved equivalent make with suitable lamps ( lamps cost will be paid separately ) and seperate control gear box ( cg box cost will be paid separately ) on flood light mast, supply and fixing of clamps, supports, nuts, bolts including welding, painting etc. all complete with labour and materials as per directions of engineer in charge. 375 type qvf 135 / 500 w halogen halolite floodlight luminaire 376 type qvf 135 / 70 w mhn td halolite floodlight luminaire including separate cg box 377 control gear box for flood lighting including cost of c.g. box: supply, installation, connection, testing and commissioning of control gear box of philips / approved equivalent make suitable for flood light mast fittings including supply of steel structures / flat / angles and welding, painting etc. all complete with labour and materials as per directions of the engineer in charge. 378 zvx x 300 / 250 / 240, 1x250 w hpi t pressure die cast aluminium cg boxrs with open construction ballasts 379 zvx x 310 / 400 / 240, 1x400 w hpi t pressure die cast aluminium cg boxrs with open construction ballasts 380 zvx 330 / 250 / 240, 1x250 w son pressure die cast aluminium cg boxes with open construction ballasts 381 zvx x 410 / 1000 / 220, 1x1000 w hpi t die cast aluminium cg box 382 zvx x 260 / 70i / 240, 1 x 70 w mhn td pressure die cast aluminium cg boxes with open construction ballasts 383 zvx x 340 / 250 / 240, 1x400 w son pressure die cast aluminium cg boxes with open construction ballasts 384 supply and inst. of c.g. box for flame proof fittings : supply, installation, connecting, testing and commisioning below given flameproof cg box, approved for zone 1 and gas group iia, iib including supply of necessary mounting steel structure / flat / angle and welding, painting etc. all complete with labour and materials as per directions of eic. 385 type flpw 927 ( baliga ) / type cgf 1108 ( crompton ) / 80 w hpmv flameproof cg box approved for zone i to gas group iia, iib 386 supply and inst. of increased safety control gear box : supply, installation, connecting, testing and commisioning below given increase safety cg box, approved for division 2 and gas group iia, iib & iic including supply of necessary mounting steel structure / flat / angle and welding, painting etc. all complete with labour and materials as per directions of eic. 387 type is 30660 ( baliga ) / type cgi 1108m ( crompton ) / 80 w hpmv increased safety cg box approved for division_2 and gas group iia, iib, iic 388 supply of lamps : supply of below given m / s philips or equivalent make lamps for installation in lighting fittings / fixtures as per directions of eic. 389 led bulb 5 6w 390 led bulb 9w 391 led tubelight 18w 392 installation of lighting fixtures ( excluding cost of fixtures ) : fixing of following light fittings attachments on ms hanger / supports / concrete wall structure / steel structure completed with lead in wires and other accessories all complete with labour and materials as per direction of the engineer in charge. ( cost of light fittings / lamp control gears and other fittings shall be excluded ) . 393 flp / increased safety wellglass / bulkhead / tubelight / floodlight 394 flp / increased safety control gear box / junction box / switch / socket 395 recessed tubelight fitting 396 ordinary bulkhead / pl type fitting 397 street light fitting ( upto 9 m height ) 398 street light fitting ( more than 9 m height ) 399 floodlight without control gear 400 control box for floodlight 401 floodlight without control gear ( more than 9 m height including on fldm ) 402 control box for floodlight ( more than 9 m height including on fldm ) 403 overhauling of window ac, split ac, water cooler etc. 404 overhauling and painting of wac, sac, wc & cold storage of different make & different capacities located at various location within the iocl premises. job includes removal of machines from location , dismantling , cleaning , washing , chemical cleaning of condenser & cooling coil , overhauling , lubrication of blower motor , checking , repair / rectification / replacement of effective control component. painting of all metal part and chassis cover internal painting with primer & outer painting with synthetic enamel paint. cleaning of coil & condenser to be done with wire brush. defective / damage insulation to be replaced. all the electrical wires must be dressed properly. defective wires to be replaced including supply of wires. defective / damage asbestos sheet to be replaced. asbestos sheet shall be provided by the owner. cleaning / replacement of filter by nylon filter.reassembly of machine, shifting to location & testing of machine. job complete in all respect including men & material and as per direction and instruction of site engineer / engineer in charge. 405 monthly routine maintenance of window ac, split ac, water coolers etc. 406 routine, regular and breakdown maintenance of wac, sac, wc and cold storage of different make & different capacities installed at various location of iocl premises . job includes attending the complaints of machines as per the complaint register and instruction of site engineer. job includes checking of machines, identification of defect, repair / replacement of defective component. rewinding of blower motor. replacement of thermostat, blower, fan blade, electrical switches, control knob, wires. cleaning of air filter, removal of dust from cooling coil & condenser by removing the machine from location if required. attending the minor / major leakage of refrigerant gas r 22 / r 12 arresting the leak and recharging the gas. repair / replacement of defective bush / bearing of blower motor including lubrication of blower motor, tightening of all the electrical connection. repair / replacement ( by repaired compressor ) of defective compressor. job includes dismantling of defective compressor either at site or at workshop after transportation of machine to workshop, taking necessary gate pass / permission from concerned 407 installation of split ac 408 transportation, installation, testing & commission of 2.0 / 3.0 tr split ac of any indian make. job includes supply and providing copper tube upto 4.0 meter, insulation of copper tube, refrigerant gas r 22 charging, supply & fixing required electrical wire. job complete in all respect as per direction of site engineer / engineer in charge. 409 additional copper tube for split ac 410 supply & fixing of additional length of copper tube for split a / c commissioning including all accessories. 411 replacement of burnt uncut compressor 412 replacement of burnt uncut compressor of 1.5 ton capacity from the manufacturer whenever required as per direction of engineer in charge. 413 replacement of burnt uncut compressor of 1.0 ton capacity from the manufacturer whenever required as per direction of engineer in charge. 414 gas charging of air conditioner 415 gas charging of air conditioner upto 1.5 ton capacity with job involved transportation of machine to vendors works. checking of all components for leak by charging co2 gas & finally evacuating the compressor completely & charges of refrigerant gas 22. a 416 electrical service items 417 cable laying laying of all type of cables lt ( pvc / xlpe / armoured / unarmoured / power / control / signalling ) in trenches, in cable racks, in trays, in protective pipes, poles, columns, in conduits, in panels and on structures etc.; including the supply and installation of all required materials such as fixing clamps, screws, cable straps, tags, etc. as required ( other than the supply of the conduits, cables, pipes, cable racks, trays, poles, structures and panels ) complete in all respect, including cost of all labour, tools, consumable materials, etc. and cutting the cables in required lengths as per directions of site engineer / engineer in charge: 418 power cables lt : od upto 20 mm 419 power cables lt : od above 20 mm and upto 40 mm 420 power cables lt : od above 40 mm and upto 60 mm 421 power cables lt : od above 60 mm 422 power control cables lt : od upto 20 mm 423 cable laying laying of all type of cables lt ( pvc / xlpe / armoured / unarmoured / power / control / signalling ) in trenches, in cable racks, in trays, in protective pipes, poles, columns, in conduits, in panels and on structures etc.; including the supply and installation of all required materials such as fixing clamps, screws, cable straps, tags, etc. as required ( other than the supply of the conduits, cables, pipes, cable racks, trays, poles, structures and panels ) complete in all respect, including cost of all labour, tools, consumable materials, etc. and cutting the cables in required lengths as per directions of site engineer / engineer in charge: 424 power cables ht 425 removal of rubbish / debris / brickbats 426 removal of rubbish / debris / brickbats, laterite boulders, earth, plaster flakes etc. including carriage by mechanical transport including packing stacking the rubbish in regular stacks at loading points at different places before loading the same in the trucks and unloading the same at directed places upto a lead of 2 km, including local carriage of rubbish at loading and unloading point etc. complete as per direction of the engineer in charge. ( payment will be made by stack measurement after deducting 20% for voids from stack measurement ) . 427 painting of electrical equipments 428 cleaning of surface, rust removing of foreign matter, rubbing down thoroughly with emery paper, wire brush, washing with degreasing solvent ( white spirit ) to remove grease etc. and preparation of surface for application of enamel paint by spray painting on bus ducts, transformers / motors / or any other metallic surface with one coat of ready mixed primer and two coats of approved quality / apcolite asian synthetic enamel paint including supply of paint suitable for a temperature of 100 degree celsius. all complete with labour and materials as per directions of the engineer incharge. 429 cleaning of surface, rust removing of foreign matter, rubbing down thoroughly with emery paper, wire brush, washing with degreasing solvent ( white spirit ) to remove grease etc. and preparation of surface for application of paint by spray painting on electrical equipment / structures / poles or any other metallic surface with two coats of approved brand & manufacturer of aluminium paint including supply of paint suitable for a temperature of 100 degree celsius. all complete with labour and materials as per directions of the engineer in charge. 430 lettering 431 lettering with black japan paint of approved brand and manufacture note : unit of measurement is considered each which is equal to per cm height per letter. 432 ht cable disconnection: disconnection of ht cables of following sizes at one end and reconnecting it at same place or another place after dressing and cleaning the terminals all complete with labour and materials as per the direction of the the engineer incharge 433 overall diameter upto 35 mm 434 overall diameter > 35 mm but upto 55 mm 435 overall diameter >55 mm but upto 75 mm 436 overall diameter > 75 mm 437 lt cable disconnection: disconnection of lt cables of following sizes at one end and reconnecting it at same place or another place after dressing and cleaning the terminals all complete with labour and materials as per the direction of the the engineer in charge. 438 overall diameter upto 35 mm 439 overall diameter > 35 mm but upto 55 mm 440 overall diameter >55 mm but upto 75 mm 441 overall diameter > 75 mm 442 temporary laying and dismantling of cables: temporary laying and dismantling of following cables ( armoured / unarmoured, power / control / telecommunication / computer ) of different voltage grades / sizes / types for temoprary connections during shutdown etc., including transportation of cable from stores / another site and returning the same after dismantling to store, all complete with labour and materials as per directions of the engineer incharge. 443 overall diameter upto 35 mm 444 overall diameter > 35 mm but upto 55 mm 445 overall diameter >55 mm but upto 75 mm 446 overall diameter > 75 mm 447 cleaning of light fitting fixtures: cleaning of below given fitting fixtures alongwith perfex cover ( wherever applicable ) with the help of surf powder. it includes the removal of perfex cover, washing the lighting fixture with powder, cleaning with fresh water and clothes and refixing in the same position. it also includes arranging ladder as and wherever required, providing scaffolding at all heights with necessary tools & tackles. all complete with labour and materials as per directions of the engineer incharge. 448 tube light fitting / ceiling / exhaust fan / fan at any height inside a building. 449 mll / hpmv / hpsv lamp of flp / increased safety / weather proof or any other similar fittings upto 250 w 450 lt panel cleaning 451 cleaning of complete pcc / mcc panels. it includes opening of side top covers, removal of dust by vacuum cleaners / blowers etc., checking and tightening of screws, nuts, bolts, washers & connections, application of petroleum jelly and boxing up of the panels. all complete with labour and materials as per directions of the engineer in charge. 452 earth resistance measurement 453 measurement of earthing resistance in thepump station / rcp / cp / ( other pipeline installation ) including transportation of earthing electrodes, cables etc. from stores to site, drawing the same into the ground at different points for measuring the earth resistance. the job includes the supply of connecting leads, clamps etc. all complete with labour and materials as per directions of the engineer in charge. note measuring instruments to be supplied by the owner 454 transformer cleaning 455 cleaning of transformer includes surface cleaning i.e. cleaning of accumulated sticky oil and other dust, oil fins. job includes opening of lt duct & ht terminal box, cleaning of duct and terminal box, tightening of nuts & bolts wherever is required. job to be completed with all men, materials and equipments like tools & tackles as per direction and satisfaction of the engineer in charge. all cleaning materials such as markin cloth, cotton waste etc. shall be supplied by the contractor. 456 ht / lt motor cleaning: cleaning of ht / lt motors & its push button includes cleaning of accumulated oil / spilage oil & other particles on the surface of motor & connected cable & surrounding area of the motor. all cleaning material such as cotton waste, markin cloth etc. shall be supplied by the contractor. job to be completed with all man & material as per direction & entire satisfaction of the engineer in charge. 457 ht motors 458 lt motors less than 45 kw 459 lt motors 45 kw & above 460 fixing of electrical components 461 fixing, fitting, commissioning, assembly of loose supplied components, if any, and connecting of one no. switch fuse unit / automate / starter of rating upto 400 a , 3 phase, 415 v with on without relay in normal / explosion proof enclosure, existing / new distribution panel or in control panel, mounted on wall / floor etc. transportation of automate / starter / switch fuse unit from the store to the site ( maximum distance of 10 km ) . job complete in all respect with labour and as per thedirection of engineer in charge excluding supply of switch fuse unit / automate / starter. 462 cable trench: 463 excavation in unpaved ares of earth in the work sites for cables trenches for a depth upto 1.5 meters including shoring, strutting etc. ( if necessary ) , backfilling the trench after cable laying with excavated earth or sand within the work sites complete in all respects including consumables, tools / equipments and labour. the work shall be performed as per directions of engineer in charge / site engineer. 464 lightning arrestor : erection, installation, testing & commissioning of lightning arrestors with insulating base, discharge counter, fittings etc. including assembling as required, installation on already made steel structures or fixtures, aligning, levelling, grouting, assembling and fitting of accessories / instruments etc. supplied separately, if any, making of the conductor connection, cables connections as required, earthing, testing, commissioning the same, complete in all respects including consumables, tools / equipments and labour as per directions of engineer in charge / site engineer. the supply of earthing strip is not covered in this item. 465 for 60 kv rated voltage ( highest system voltage 72.5 kv ) , 10 ka lightening arrestors 466 for 30 kv rated voltage ( highest system voltage 36 kv ) , 10 ka lightening arrestors 467 brick work in cable trench: removal of bricks from cable trench without any damage to the cable and disposing it within a lead of 50 meteres or stacking it at the edge of the trench and putting it back into the same trench or in a new cable trench within a lead of 50 meteres after the work is completed including completing the work in allrespects with all labour and materials as per the direction of the engineerin charge. 468 removal and relaying 469 removal and stacking only 470 removal of sand from cable trench 471 removal of sand from cable trench without any damage to the cable and disposing it within a lead of 50 meteres or putting it back into the same trench or in a new cable trench within a lead of 50 meteres all complete with labour and materials as per the direction of the engineer incharge. 472 removal of rcc slab upto 150 mm thick 473 removal of rcc slab upto 150 mm thick and of any size placed above the cable trench, handling carefully without any damage of the slab and cable beneath it and keeping it back in position after laying / removing the cable and sealing the same between rcc covers with cement & sand. job complete in all respect with labours and materials and as per direction of engineer in charge. 474 cable dismantling / pull out: dismantling / pulling out the lt / ht, pvc / xlpe, power / control / telephone / computer, armoured / unarmoured cables of various voltage grades / types / sizes / makes from the trench ( upto 1.5 metres deep ) / pipes / structures / racks or trays, rolling it into empty cable drums, returning the filled up cable drums to the store / another site including transportation of empty cable drums from stores to site and filled up cable drums from site to stores / another site, etc. including cutting of cables at joints / termination, dismantling of clamps etc. all complete with labour and materials as per directions of the engineer incharge. 475 overall diameter upto 35 mm 476 overall diameter > 35 mm but upto 55 mm 477 overall diameter >55 mm but upto 75 mm 478 overall diameter > 75 mm 479 cable dismantling / pull out and relaying: dismantling / pulling out the lt / ht, pvc / xlpe, power / control / telephone / computer, armoured / unarmoured cables of various voltage grades / types / sizes / makes from the trench ( upto 1.5 metres deep ) / pipes / structures / racks or trays and relaying as per direction of engineerin charge, all complete with labour and materials. job includes declamping, rerouting and relaying of cable for reglanding etc. 480 overall diameter upto 35 mm 481 overall diameter > 35 mm but upto 55 mm 482 overall diameter >55 mm but upto 75 mm 483 overall diameter > 75 mm 484 dismantling of power distribution equipments: dismantling of following power distribution equipments without any damage to it and returning it to our stores or reinstallation of same at a place within a lead of 3 km ( reinstallation charges not includes ) all complete with labour and materials as per the direction of the eic. 485 small equipment requiring tractor trailer but not requiring crane / hydra etc. ( beyond 100 kg. ) 486 equipment weighing above 500 kg and requiring hydra and tractor trolley etc. 487 equipment weighing more than 3 mt and requiring crane and tractor trolley etc 488 attending complaints : attending and rectification of complaint of the following note: all materials & accessories of fittings required for attending the complaint shall be supplied by the owner free of cost. the contractor has to take the material from central store / departmental store / site in charge. for attending above complaints. the defective material are to be returned to the deptt. stores. consumables items like pvc tape, cleaning tape, cleaning cloth, ctc etc. are in the scope of contractor. also application of pvc / m seal on above fittings to above entering of water / insects as per direction of the engineer in_charge. 489 tube light fittings including replacement of chokes, tubes, down rods, starters, starter holder, tube rod and holders and all other accessories if needed including cleaning of the light fittings if required. all complete with labour and materials as per direction of the engineer in charge 490 flp / increased safety and weatherproof upto 250 w lamps including replacement of lamps, lamp holders, connectors, glass & other accessories etc. including external and internal cleaning of glass and complete fittings as well as other related job involved. all complete with labour and materials as per directions of engineer in charge. 491 control gear boxes of hpmv lamp fittings upto 250w including replacement of chokes, condensers, fuses, holders, fuse base, wiring or any other accessories of control gear box. all complete with labour and materials as per directions of the engineer in charge. 492 fldms / highway fittings / street light fittings including replacement of lamps, tubes, ignitors, chokes, capacitors, fuses, fuse holders, gasket, providing / extension rod on lamp holder glass including cleaning of glass or any other accessories required. all complete with labour and materials as per directions of the engineer in charge. 493 circuit fault rectification 494 rectification of circuit fault in flp / non flp junction boxes / djbs / dbs / switchboards etc. other than in fldms including supply of minor type of materials costing less than rs.6.00 in one complaint. all complete with labour and materials as per directions of the engineer in charge. note : materials used by contractor should not exceed rs.6.00 per complaint. balance material exceeding rs. 6.00 per complaint shall be supplied by owner free of cost. also application of pvc putty / m seal putty on above fittings, if required, to avoid entering of water / insects as per directions of the engineer in charge. putty will be supplied by owner free of cost. 495 miscellaneous complaints 496 attending complaint of installation e.g. hand lamps, flood lights, exhaust fans, halogen fittings, smoking booth & other elect. complaints & replacement of crocodile clips on earthing leads with a maximum period of one hour from the time of receipt of complaint. 497 cleaning of cable trenches 498 cleaning of cable trenches of depth upto 3 meter and width 1.5 meter of cable galleries, sub stations and other locations etc. the job includes lifting of rcc slabs / chequerred plates, removing of paper waste jute, mud, or any other unwanted materials lying in trenches & dumping these waste materials in the nearest dust bin or as directed by the engineer in charge., keeping back rcc slabs / chequerred plates in positions. all complete with men and materials as per direction of the engineer in charge. 499 horizontal drilling 500 making horizontal bore / drill for roads at different location. job includes pipe coupling & cutting, insert the pipe through both side of the road and make it as original ( gi pipe, ms pipe from 2 to 8 meter long ) ( horizontal drilling ) . gi / ms pipe supply shall be in the scope of iocl. transportation of the pipe from stores / site to work site shall be in the scope of the contractor. 501 replacement of old transformer oil 502 replacement of the old oil from the transformer as per the specifications given below a ) old oil heating by hot oil circulator for 4 hrs. b ) draining out entire quantity of oil. c ) blanking of all opening for vaccum pulling. d ) applying vacuum pulling for 4 hrs minimum 600 hg mercury pressure. e ) filtration of new transformer oil for filling. f ) filling the oil under vacuum & filtration of oil till desired bdv is attained as per is. g ) releasing all the air from air release plug & bucholz relay h ) topping up of oil. i ) to and fro transportation of filter machine and equipments. j ) transportation of old and new oil. 503 wbm road / concrete breaking: 504 wbm road / concrete breaking for cable trenches including required shoring strutting etc., and repairing of the road / dyke to original condition and disposing off excess materials ( within the work site ) job complete in all respects including the cost of labour, tools, materials, load, lift hire charges of equipments, if any, complete as per directions of site engineer / engineer in charge. 505 excavation in hard rock : 506 excavations in hard rock requiring chiselling for cable trenches upto depth of 1.5 metres, including shoring, strutting ( if necessary ) , excavated earth or sand to be back filled ( after cable laying ) to the finished level and excess earth to be disposed off within the work sites complete in all respects including comsumables, tools / equipments and labour. the work shall be performed as per directions of engineer in charge / site engineer. 507 itc of ceiling fan and regulator with aluminium connecting cable 508 installation, testing and commissioning of ceiling fan and regulator including wiring the down rod of standard length ( upto 30 cm ) with 1.5 sqmm, pvc insulated, aluminium conductor, single core cable etc. as required. 509 installation of exhaust fan:fixing of exhaust fans on existing opening, complete with lead in wires and other accessories all complete with labour and materials as per direction of the engineer in charge. ( cost of fans shall be excluded ) 510 with louver shutter / mesh 511 without louver shutter / mesh 512 flp / is exhaust fan 513 dismantling of split ac 514 dismantling , shifting of 2.0 / 3.0 tr split ac including dismantling of all the copper tube, condensing unit, electrical connection to new location or a / c workshop as per direction of site engineer / engineer in charge. 515 electrical supply items 516 shock treatment chart 517 supply of shock treatment chart in glass frame suitable for wall mounting 518 safety equipment supplying the following safety equipment as per directions of site engineer / engineer in charge complete in all respects including transportation charges: 519 supply and installation of 33 kv discharge rod 520 supply of hand gloves 521 suitable for 11 / 33 kv voltage level with isi mark and with test certificate with issue date within 1 month 522 supply of elastomer mat 523 supply of 2000mm x1000 mm, 3 mm thick ( class b ) elastomer mats conforming to is: 15652:2006 524 insulating elastomer mats conforming to is 15652:2006 of thickness 2.5 mm ( class b ) 525 extra for providing copper lugs: supply ( to be used only when it is mentioned in sor that lug supply is excluded ) of copper tube terminal heavy duty ( crimping cable lug ) of kse / dowells make or equivalent certified by eic. of the following sizes. 526 1.5 sqm 527 2.5 sqm 528 4.0 sqm 529 6.0 sqm 530 10.0 sqm 531 16.0 sqm 532 25 sqmm 533 extra for providing aluminium lugs: supply ( to be used only when it is mentioned in sor that lug supply is excluded ) of aluminium tube terminal heavy duty ( crimping cable lug ) of kse / dowells make or equivalent certified by eic. of the following sizes. 534 16.0 sqm 535 25 sqmm 536 35 sqm 537 50 sqm 538 70 sqm 539 120 sqm 540 150 sqmm 541 240 sqmm 542 300 sqmm 543 extra for providing flameproof double compression ( brass ) cable glands: supply ( to be used only when it is mentioned in sor that gland supply is excluded ) of cmrs / cce approved flameproof double compression ( brass ) cable gland for following overall cable sizes as per directions of engineer in charge. 544 10.0 to 16.0 mm 545 16.5 to 18.0 mm 546 18.5 to 20.0 mm 547 20.5 to 23.0 mm 548 23.5 to 26.0 mm 549 26.5 to 30.0 mm 550 30.5 to 33.0 mm 551 33.5 to 37.0 mm 552 37.5 to 41.0 mm 553 41.5 to 46.0 mm 554 46.5 to 52.0 mm 555 52.5 to 60.0 mm 556 60.5 to 66.0 mm 557 lightning arrestor : supply of lightning arrestors with insulating base fittings etc. as per specifications 558 for 60 kv rated voltage ( highest system voltage 72.5 kv ) , 10 ka lightening arrestors 559 for 30 kv rated voltage ( highest system voltage 36 kv ) , 10 ka lightening arrestors 560 supply of materials / equipments as given below complete in all respects, as per the instruction of eic including transportation to site and storing : 561 supply of zn grounding cells ( with prepackaged backfill material ) including required length of cable ( minimum 10 m ) of approved make & as per instructions of eic. 562 dcdb 563 installation and commissioning of wall mounted dcdb including supply of all cable end lugs, cable glands, fittings & fixtures and all other required accessories, tools and tackles complete in all respects as per directions of site engineer / engineer in charge. item includes supply and termination of 2 runs of 1cx25 sq. mm copper cable for battery bank 564 ht 33 kv, 11 kv & 6.6 kv cables screened, xlpe insulated, extruded pvc type st 2 inner sheathed, galvaznized armoured, pvc type st 2 overall sheathed, stranded, frlsh, c2, smoke density<40% 565 al 3cx120 mm² 6.6kv 566 al 3c x 150 mm² 6.6 kv 567 al 3cx185 mm² 6.6kv 568 al 3cx240 mm² 6.6 kv 569 al 3cx400 mm² 6.6kv 570 al 3cx400 mm² 33kv 571 lt cables frlsh aluminium cables 1.1 kv, xlpe insulated, extruded pvc type st 2 inner sheathed, galvanized armoured, pvc type st 2 overall sheathed, stranded, frlsh, c2, smoke density<40% 572 al, 3cx10 mm², a2xfy 573 al, 3cx16 mm² 574 al, 4cx16 mm², a2xfy 575 al, 3cx25 mm², a2xfy 576 al, 3.5cx25 mm², a2xfy 577 al, 4cx25 mm², a2xfy 578 al 3c x 35 mm² 579 al, 3.5cx35mm², a2xfy 580 al, 3cx50mm² 581 al, 3.5cx50 mm², a2xfy 582 al, 3½c x 95 mm² 583 al, 3½c x 120 mm² 584 al, 3.5cx150 mm², a2xfy 585 al, 3c x 185 mm² 586 al, 3½c x 185 mm² 587 al, 3.5cx240 mm², a2xfy 588 al, 3.5cx400 mm², a2xfy 589 supply of xlpe insulated , pvc sheathed cable, 1100 v grade conforming to is: 7098 ( p 1 ) as per specifications and approved make 590 copper cable size 1cx50 sq. mm armoured 591 copper cable size 1cx35 sq. mm armoured 592 copper cable size 1cx25 sq.mm armoured 593 copper cable size 2cx6 sq.mm armoured 594 copper cable size 2cx25 sq.mm armoured 595 copper cable size 2cx70 sq.mm armoured 596 tinned copper cable size 1cx10 sq.mm unarmoured for distributed anodes of station cp system 597 civil items 598 providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement all work up to plinth level : 1:2:4 [ 1 cement : 2 coarse sand derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources ] 599 steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level :thermo mechanically treated bars of grade fe 500d or more 600 brick work with common burnt clay f.p.s. ( non modular ) bricks of class designation 7.5 in foundation and plinth in : cement mortar 1:4 ( 1 cement : 4 coarse sand ) 601 random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 ( 1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size ) at window sills, ceiling level and the like. 602 12mm plaster ( in coarse sand ) :1:4 ( 1 cement : 4 coarse sand ) 603 casting, supplying and erecting in position precast reinforced cement concrete elements ( with proper lifting lugs ) for trench & drain covers, shelves, partitions, post, slabs etc. for all leads and levels including making necessary moulds, vibrating, tamping, curing, finishing the top surface with cement mortar 1:3 ( 1 cement : 3 fine sand ) to give a smooth and even surface, transportation to site, aligning and fixing in position with cement mortar 1:3 ( 1 cement: 3 find sand, ) including making recess in brick wall for placing the precast element in position and making good the same etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per directions of the engineer in charge. [ note: payment for reinforcement shall be made as per relevant item of sor. ] :with cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 10 mm nominal size ) . 604 motor items 605 rewinding of lt motor upto & incl 11 kw as per special conditions of contract ( technical ) of tender document 606 rewinding of lt motor 12 18 kw as per special conditions of contract ( technical ) of tender document 607 rewinding of lt motor 132 150 kw as per special conditions of contract ( technical ) of tender document 608 overhauling of lt motor upto & incl 11 kw as per special conditions of contract ( technical ) of tender document 609 overhauling of lt motor 12 15 kw as per special conditions of contract ( technical ) of tender document 610 overhauling of lt motor 132 260 kw as per special conditions of contract ( technical ) of tender document 611 shaft metallizing / repair of lt motor upto & incl 11 kw as per special conditions of contract ( technical ) of tender document 612 shaft metallizing / repair of lt motor 12 15 kw as per special conditions of contract ( technical ) of tender document 613 shaft metallizing / repair of lt motor 16 21 kw as per special conditions of contract ( technical ) of tender document 614 shaft metallizing / repair of lt motor 111 150 kw as per special conditions of contract ( technical ) of tender document 615 dynamic balancing of lt motor upto & incl 11 kw as per special conditions of contract ( technical ) of tender document 616 dynamic balancing of lt motor 12 15 kw as per special conditions of contract ( technical ) of tender document 617 dynamic balancing of lt motor 111 150 kw as per special conditions of contract ( technical ) of tender document 618 supply terminal plate of lt motor upto & incl 11 kw as per special conditions of contract ( technical ) of tender document 619 supply terminal plate of lt motor 12 18 kw as per special conditions of contract ( technical ) of tender document 620 supply terminal plate of lt motor 111 150 kw as per special conditions of contract ( technical ) of tender document 621 supply of cooling fan lt motor upto & incl 11 kw as per special conditions of contract ( technical ) of tender document 622 supply of cooling fan lt motor 12 18 kw as per special conditions of contract ( technical ) of tender document 623 supply of cooling fan lt motor 111 150 kw as per special conditions of contract ( technical ) of tender document 624 supply of fan cover lt motor upto & incl 11 kw as per special conditions of contract ( technical ) of tender document 625 supply of fan cover lt motor 12 18 kw as per special conditions of contract ( technical ) of tender document 626 supply of fan cover lt motor 111 150 kw as per special conditions of contract ( technical ) of tender document 627 supply of end shield lt motor upto & incl 11 kw as per special conditions of contract ( technical ) of tender document 628 supply of end shield lt motor 12 15 kw as per special conditions of contract ( technical ) of tender document 629 supply of end shield lt motor 111 150 kw as per special conditions of contract ( technical ) of tender document 630 suply of bearing cover lt motor upto & incl 11 kw as per special conditions of contract ( technical ) of tender document 631 suply of bearing cover lt motor 12 18 kw as per special conditions of contract ( technical ) of tender document 632 suply of bearing cover lt motor 111 150 kw as per special conditions of contract ( technical ) of tender document 633 erection, testing and commissioning of motor on existing foundation including carriage from stores to the site, unpacking, placing on foundation, levelling, fixing and fitting of all components, making necessary connections, phase checking, meggering as necessary all complete with labour and materials as per the direction of engineer in charge. small equipment requiring tractor trailer but not requiring crane / hydra etc. ( beyond 100 kg. ) 634 erection, testing and commissioning of motor on existing foundation including carriage from stores to the site, unpacking, placing on foundation, levelling, fixing and fitting of all components, making necessary connections, phase checking, meggering as necessary all complete with labour and materials as per the direction of engineer in charge. equipment, panels, motor etc. weighing above 500 kg and requiring hydra and tractor trolley etc.but <3mt 635 erection, testing and commissioning of motor on existing foundation including carriage from stores to the site, unpacking, placing on foundation, levelling, fixing and fitting of all components, making necessary connections, phase checking, meggering as necessary all complete with labour and materials as per the direction of engineer in charge. equipment, panels, motor etc.weighing more than 3 mt and requiring crane and tractor trolley but <25mt 636 supply and installation of l&t / siemenas or equilent make dol motor starter ( with all acessaries including o / l relay etc. ) confirming to is:13947 4 on walls / steel structure, connection of cables all complete with labour and materials as per direction of the engineer in charge upto 5.5kw 637 supply and installation of l&t / siemenas or equilent make dol motor starter ( with all acessaries including o / l relay etc. ) confirming to is:13947 4 on walls / steel structure, connection of cables all complete with labour and materials as per direction of the engineer in charge 5.5 to 7.5 kw 638 supply and installation of l&t / siemenas or equilent make dol motor starter ( with all acessaries including o / l relay etc. ) confirming to is:13947 4 on walls / steel structure, connection of cables all complete with labour and materials as per direction of the engineer in charge 7.5 to 11kw 639 supply and installation of l&t / siemenas or equilent make dol motor starter ( with all acessaries including o / l relay etc. ) confirming to is:13947 4 on walls / steel structure, connection of cables all complete with labour and materials as per direction of the engineer in charge 11 to 15kw 640 transportation of lt induction motor for rewinding frompump station to contractors works and back to pump station. this includes arranging suitable vehicle for to & fro transportation, unloading & loading the motor at rewinding works. all complete with labour, materials, tools and tackles as per the direction of engineer in charge.note: lifting facility to put the motor in the vehicle at our end will be provided by iocl for the motors of capacity more than 15 kw. motor upto 1.5 kw 641 transportation of lt induction motor for rewinding frompump station to contractors works and back to pump station. this includes arranging suitable vehicle for to & fro transportation, unloading & loading the motor at rewinding works. all complete with labour, materials, tools and tackles as per the direction of engineer in charge.note: lifting facility to put the motor in the vehicle at our end will be provided by iocl for the motors of capacity more than 15 kw. motor above 1.5 kw to 18.5 kw 642 transportation of lt induction motor for rewinding frompump station to contractors works and back to pump station. this includes arranging suitable vehicle for to & fro transportation, unloading & loading the motor at rewinding works. all complete with labour, materials, tools and tackles as per the direction of engineer in charge.note: lifting facility to put the motor in the vehicle at our end will be provided by iocl for the motors of capacity more than 15 kw. motor above 75 kw to 160 kw 643 online condition monitoring and diagnostic testing of 6.6 kv ht motors as per tender specifications 644 offline condition monitoring and diagnostic testing of 6.6 kv ht motors as per tender specifications 645 offline diagnostic testing of ht cables as per tender specifications 646 fixed charges for transportation of equipments, mobilisation of engineers & instruments, accomodation arrangement by contractor itself during work at site, lodging and boarding etc. for carrying out work at erpl patna pump station....
34175516 tender for supply of agriculture pet plastic wire for creeper vegetable cultivation, gi wire, and reinforced concrete pole etc...
33574007 bids are invited for lrb rock wool 75mm thick; 105kg / cu. mtr bulk density with both side gi wire nett; ntpc kahalgaonsite ( q3 ) total quantity : 8500...
33462315 bids are invited for lrb rock wool 75mm thick; 105kg / cu. mtr bulk density with both side gi wire nett; ntpc kahalgaonsite ( q3 ) total quantity : 8500...
32874382 auction sale of s.m scrap (comp. of differant size of gi wire, rods,lamp fittings, fire extingusher, rusted almirah, angle, channel, panel, joist, c.g sheet, water tank, iron board, iron plate, and sheet, filter, rusted drum, mild steel,barbed wire, pipe, hand trolley, gate, mobile filter, wire coil of sm rod,gi pipe etc. and mixed iron big and small lamp scrap)and misc. s.m scrap etc. total weight 5.00 mt....
31318468 supply of supply of gi wire to tie the fiber as per ts 21 (coil/set of 100 mtr)supply of gi wire to tie the fiber as per ts 21 (coil/set of 100 mtr),supply of gi wire to tie the fiber as per ts 21 (coil/set of 100 mtr)...
30458823 bids are invited for pile boring, providing and installation bored cast in situ reinforced cement concrete piles of grade m 25 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. by percussion drilling using direct mud circulation ( dmc ) or bailer and chisel technique by tripod and mechanical winch machine all complete, including removal of excavated earth with all its lifts and leads ( length of pile for payment shall be measured up to bottom of pile cap ) .450mm dia piles ( inclusive of carriage ) , pcc providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering all work up to plinthlevel : 1:3:6 ( 1 cement : 3 coarse sand ( zone iii ) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources ) ( inclusive of carriage ) , rcc providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, portland pozzolana / ordinary portland / portland slag cement, admixtures in recommended proportion as per is: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer in charge; for the following grades of concrete. note: extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. in case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re design the mix or bear the cost of extra cement. ( inclusive of carriage ) , brick work brick work with bricks of class designation 100a in foundations and plinthin :cement mortar 1:4 ( 1 cement : 4 coarse sand ) ( inclusive of carriage ) , sand filing supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. ( inclusive of carriage ) with lead upto 3 km , shuttering centering and shuttering including strutting, propping etc. and removal of form for foundations, footings, bases of columns, etc. for mass concrete , steel steel reinforcement for r.c.c. work ready to use cut and bend rebars of approved make from factory / workshop to construction site including placing in position and binding all complete thermo mechanically treated bars of grade fe 500d or more. , plinth protection making plinth protection 50mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand ( zone iii ) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources ) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. , door & window providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate z sections and other sections of approved make conforming to is: 733 and is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber / neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, c.p. brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer in charge. ( glazing, paneling and dash fasteners to be paid for separately ) :powder coated aluminium ( minimum thickness of powder coating 50 micron ) , glass providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in charge . ( cost of aluminium snap beading shall be paid in basic item ) :with float glass panes of 5 mm thickness ( weight not less than 12.50 kg / sqm ) , upvc door providing and fixing of factory made upvc white colour casement door, upvc multichambered extruted frame, sash and mullion profile. frame duly reinforced with 1.2mm gi section box tpe chamber and sash with 1.5mm thick gi section ( ± 0.2mm ) based on wind load calculations ( shape and size according to upvc profiles ) , appropiate dimentions of upvc extruded glazing bead, epdm gasket ( k / o type ) , seperate drainage system, ss34 grade friction hinges 2d / 3d plate hinges, zinc alloy ( white powder coated ) casement handle, gi fastener 8x100 mm size for fixing frame to finish wall, plastic packer and caps and necessary steel screws etc.profile of frame and sash shall be metered cut and fusion welded at all corners, mullion shall be also fusion welded / joined mechanically including drilling of holes for fixing hardware and drainage of water etc. after fixing of frames , gap between frame and adjascent wall shall be filled with pu foaam / backer rod required size and the approved quantity. after that sealed with weather proof silicon sealant at both side, all complete as per approved drawing and direction of eic , door closer providing and fixing aluminium die cast body tubular type universal hydraulic door closer ( having brand logo with isi, is : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm ) , with necessary accessories and screws etc. complete. , door providing and fixing isi marked flush door shutters conforming to is : 2202 ( part i ) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including stainless steel butt hinges wirhnecessary screws , door stopper providing and fixing aluminium hanging floor door stopper, isi marked, anodised ( anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour and shade, with necessary screws etc. complete. single rubber stopper , solling providing designation 100 a one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as perbuilding specification and direction of e / l, , tile 1 providing and laying vitrified floor tiles in different sizes ( thickness to be specified by the manufacturer ) with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand ) , jointing with grey cement slurry @ 3.3 kg / sqm including grouting the joints with white cement and matching pigments etc., complete. size of tile 600x600 mm , tile 2 providing and laying ceramic glazed floor tiles of size 300x300 mm ( thickness to be specified by the manufacturer ) of 1st quality conforming to is : 15622 of approved make in colours such as white, ivory, grey, fume red brown, laid on 20 mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand ) , jointing with grey cement slurry @ 3.3 kg / sqm including pointing the joints with white cement and matching pigment etc., complete. , tile 3 providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 ( thickness to be specified by the manufacturer ) , of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer in charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand ) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. , granite providing and laying flamed finish granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm ( average ) thick base of cement mortar 1:4 ( 1 cement : 4 coarse sand ) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the engineer in charge :flamed finish granite stone slab jet black, cherry red, elitebrown, cat eye or equivalent. , false ceiling providing and fixing mineral fibre false ceiling tiles at all heights of size 595x595mm of approved texture, design and pattern. the tiles should have humidity resistance ( rh ) of 99%, light reflectance ? 85%, thermal conductivity k = 0.052 0.057 w / m k, fire performance as per ( bs 476 pt 6 &7 ) in true horizontal level suspended on interlocking t grid of hot dipped all round galvanized iron section of 0.33 mm thick ( galvanized @120 gsm ) comprising of main t runners of 15x32 mm of length 3000 mm, cross t of size 15x32mm of length 1200 mm and secondary intermediate cross t of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item ( galvanised@80gsm ) 50 mm long 8mmouter diameter m 6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and l shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘t’ , pre fabsteel designing, providing, installing and fixing factory finished custom designed cold form light gauge steel framed super structure comprising of steel wall panel, trusses, purlins etc manufactured out of minimum 0.75 mm thick steel sheet as per design requirements. the steel sheet shall be galvanized ( az 150gms aluminium zinc alloy coated steel having minimum yield strength 300 550 mpa ) conforming to aisi specifications and ibc 2009 for cold formed steel framing and construction and also as per is: 875 1987, iso 800 1984 and is:801 1975. the wind load shall be as per provisions of is 875 ( part iii ) . lgsfs frame shall be designed as per is: 801 using commercially available software such as frame cad pro 11.7 / staad pro v8i / architekv2.5.16 / revit architecture 2011 or equivalent. proper usage of connection accessories like heavy duty tension ties, light duty hold ons, twist straps ( to connect truss with wall frames ) , strong tie, tie rod, h brackets, boxing sections, l shaped angles for better structural stability. the framing section shall be cold form c type having minimum web depth 89 mm x 39mm flange x 11mm lip in required length as per structural design requirement duly punched with dimple / slot at required locations as per approved drawings. , pre fabwall providing and fixing of external wall system on light gauge steel frame work with outer face cement boards as per standard sizes fixed with self drilling / taping screws / fasteners @ 60cm c / c of approved make. a groove of 2 mm to 3mm shall be maintained and grooves shall be sealed with silicon based sealant. the board shall be fixed in a staggered pattern. screws shall be of counter sunk rib head of 1.60mm to 4 mm thick or 8 to 10 gauge of length varying from 25 to 45 mm and. internal face 12.5 mm thick gypsum plaster board fixed on cement board as per standard sizes fixed with self drilling / taping screws / fasteners @ 60cm c / c of approved make, proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic based jointing compound for seamless finish. ( cost of frame work to be paid for separately ) outer face: outer face having 6mm thick fiber cement board fixed on 9mm thick fiber cement board, type a, as per is:14862:2000 ( high pressure steam cured ) inner face : 12.5 mm thick gypsum plaster board conforming to is 2095:2011 fixed on 8 mm thick fibre cement board confirming to is:14862:2000 of type b ( high pressure steam cured ) , pre fabin. wall providing and fixing internal wall panels on light gauge steel frame work with 12.5mm thick gypsum plaster board conforming is 2095:2011 fixed on cement board as per standard sizes fixed with self drilling / taping screws / fasteners @ 60cm c / c of approved make, screws shall be of counter sunk rib head of 1.60mm to 4 mm thick or 8 to 10 gauge of length varying from 25 to 45 mm. proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic based jointing compound for seamless finish. ( cost of frame work to be paid for separately , roof sheet supply & installation of precoated galvanised iron profile sheets ( size, shape and pitch of corrugation as approved by engineer in charge ) 0.50 mm + / 5% total coated thickness ( tct ) thick zinc coating 120gsm as per is: 277 in 240mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15 18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by engineer in charge. the sheet shall be fixed using self drilling / self tapping screws of size ( 5.5x 55mm ) with epdm seal or with polymer coated j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i. limpet washers or with g.i. limpet washers filled with white lead complete upto any pitch in horizontal / vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. , ridge plain providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + / 5% total coated thickness ( tct ) thick zinc coating 120gsm as per is: 277 in 240mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15 18 microns using self drilling / self tapping screws or with polymer coated j or l hooks, bolts and nuts and or g.i. seam bolts and nuts, g.i. plain and bitumen washers complete : ridges plain ( 500 600mm ) . , gutter drain providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + / 5% total coated thickness ( tct ) thick zinc coating 120gsm as per is: 277 in 240mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15 18 microns using self drilling / self tapping screws or with polymer coated j or l hooks, bolts and nuts and or g.i. seam bolts and nuts, g.i. plain and bitumen washers complete : gutter , flashing providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + 5% total coated thickness ( tct ) , zinc coating 120gsm as per is: 277 in 240mpasteel grade, 5 7 microns epoxy primer on both side of the sheet and polyester topcoat 15 18 microns using self drilling / self tapping screws or with polymer coated j or l hooks, bolts and nuts and or g.i. seam bolts and nuts, g.i. plain and bitumenwashers complete :flashings / aprons. ( upto 600 mm ) , under deck insulation providing and fixing thermal insulation of ceiling ( under deck insulation ) with resin bonded rockwool conforming to is: 8183, density 48 kg / m3, 50 mm thick, wrapped in 200 g virgin polythene bags fixed to ceiling with metallic cleats ( 50x50x3 mm ) @ 60 cm and wire mesh of 12.5mm x 24 gauge wire mesh, for top most ceiling of building. , resin bonded rock wool providing and fixing thermal insulation with resin bonded rock wool conforming to is: 8183, having density 48 kg / m3, 50 mm thick, wrapped in 200 g virgin polythene bags fixed to wall with screw, rawel plug & washers and held and in position by criss cossing gi wire etc. complete as per directions of engineerin charge. , face panel providing and fixing in all exterior face panels breathable vapour barrier underneath the cementfiber board as per national building code 2009 complete as per direction of engineer in charge. , lap siding supplying and installation of moisture resistant / fire resistantlap siding 8 mm thick and width as per standard sizes made ofiber cement board with embossed decorative finish to give pleasing exterior fixed horizontally with staggered joints including minimum over lapof 32 mm external cement fibre boardconforming to is 14862:2000 offixed with self drilling / taping screws / fastners of approved make. , putty providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. , distemper distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : 1 new work ( two or more coats ) over and including water tinnable priming coat with cement primer , ex. paint finishing walls with textured exterior paint of required shade : new work ( two or more coats applied @ 3.28 ltr / 10 sqm ) over and including priming coat of exterior primer applied @ 2.20kg / 10 sqm sqm , oil paint painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work . , steel 1 steel work in built up tubular ( round, square or rectangular hollow tubes etc. ) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. hot finished welded type tubes , excavation earth work in excavation over areas ( exceeding 30 cm in depth. 1.5 m in width as well es 10 sqm on plan ) including disposal of excavated earth , lead upto 50 m and lift upto 1.5 m; disposed earth to be levelled and neatly dressed. , road providing and laying c.c. pavement of mix m 25 with ready mixed concrete from batching plant. the ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc.complete as per specifications and directions of engineer in charge. ( the panel shuttering work shall be paid for separately ) . ( note: cement content considered in this item is @ 330 kg / cum. excess / less cement used as per design mix is payable / recoverableseparately ) . , paver block providing and laying 60 mm thick factory made cement concrete interlocking paver block of m 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thickcompacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of engineer in charge. , phe 1 providing & fixing stone slab table rubbed, edges rounded and polished of size 75 x 50cm deep and 1.8 cm thick fixed in urinal patitions by cutting chase of appropriate width with chase cutter and embedding the stone in chase with epoxy grout or with cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregste 6mm nominal size ) as per engineer in charge and finished smooth white agaria marble stone , phe 2 providing and fixing salem stainless steel a isi 304 ( 18 / 8 ) kitchen sink as per is: 13983 with ci brackets and stainless steel waste with plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required. kitchen sink with drain board510x1040mm bowl depth 200mm. , phe 4 providing and fixing mirror of superior glass ( of approved quality ) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing:rectangular shape 453x357 mm , phe 5 providing and fixing toilet paper holder:c.p. brass , phe 6 providing and fixing water closet squatting pan ( indian type w.c.pan ) with 100 mm sand cast iron p or s trap, 10 litre low fixturescomplete, including cutting and making good the walls andlevel whitep.v.c. flushing cistern, including flush pipe, with manually controlleddevice ( handle lever ) conforming to is : 7231, with all fittings andfloors wherever required :white vitreous china orissa pattern w.c. pan of size580x440 mm with integral type foot rests , phe 7 providing and fixing white vitreous china pedestal type water closet ( european type w.c. pan ) with seat and lid, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device ( handle lever ) , conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : w.c. pan with isi marked white solid plastic seat and lid , phe 8 providing and fixing 8 mm dia c.p. / s.s. jet with flexible tube upto 1 metre long with s.s. triangular plate to eureopean type w.c. of quality and make as approved by engineer in charge , phe 9 providing and fixing cp brass 32mm size bottle trap of approved quality & make and as per the direction of engineer in charge.. ( sink & urinal ) , phe 10 providing & fixingptmt towel ring trapezoidal shape 215 mm long 200 mm wide with minimum distance of 37 mm from wall face with concealedfittings arrangement of approved quality and colour weighing not less than 88 gms , phe 11 providing and fixing c.p. brass long body bib cock of approved quality conforming to is standards and weighing not less than 690 gms.15mm nominal bore , phe 12 providing and fixing c.p. brass bib cock of approved quality confirming to is:893115mm nominal bore , phe 13 providing and fixing c.p.brass angle valve for basin mixer and geyser points of approved quality conforming to is 8931 a ) 15 mm nominal bore.15 mm nominal bore , phe 14 providing and fixing wash bashin with c.i. brackets, 15mm dia cp brass singal hole basin mixer of approved quility and make, including painting of fittings and brackets, cutting and making good the walls wherever required white vitreous china surgeon type wash basin of size 660x460 mm with a pair of 15 mm c.p. brass pillar taps with elbow operated levers , phe 15 providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water ( 250 ml & 500 ml consumption ) , having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of engineer in charge.. , phe 16 providing & fixing chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology. , phe 17 providing and fixing white vitreous china laboratory sink with c.i. brackets, c.p. brass chain with rubber plug, 40 mm c.p brass waste and 40mm c.p. brass trap with necessary c.p. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required :size 600x450x200 mm , phe 18 providing and fixing cp brass single lever telephonic wall mixer of quality & make as approved by engineer in charge . a ) 15 mm nominal dia. , phe 19 providing and fixing cp brass shower rose with 15 or 20 mm inlet100 mm diameter , phe 20 providing and fixing ptmt towel rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. , phe 21 providing and fixing ptmt liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. , phe 22 providing and fixing g.i. pipes complete with gi fittings and clamps including cutting and making good the walls etc. ( internal work ) 40 mm dia, nominal bore , phe 23 providing and fixing g.i. pipes complete with gi fittings and clamps including cutting and making good the walls etc. ( internal work ) 50 mm dia, nominal bore , phe 24 two or more coats on new work over an under coat ofsuitable shade with ordinary paint of approved brand andmanufacturetwo more coast on new work , phe 25 p / f m.s. cap 100 mm dia , phe 26 providing and fixing, upvcpipes 6 kg / cm2 ( is: 4985 ) including all fittings ( plain or door ) e.g. bends, junction, offsets, access pieces, jointing with rubber ring / solvent cement joints includingrequired suports, cutting chase or holes in walls and floors and making good where required.75 mm dia pipe , phe 27 providing and fixing, upvcpipes 6 kg / cm2 ( is: 4985 ) including all fittings ( plain or door ) e.g. bends, junction, offsets, access pieces, jointing with rubber ring / solvent cement joints includingrequired suports, cutting chase or holes in walls and floors and making good where required.110 mm dia pipe , phe 28 providing & fixing on wall face unplasticised rigid pvc rain water pipes conforming to is:13592 tyape a included jointing with seal ring conforning to is:5382 leaving 10 mm gap for thermal expansion. ( i ) single socketed pipes.110 mm diameter , phe 29 providing, fixing on wall face unplasticised pvc moulded fittings / accessories for unplasticised rigid pvc rain water pipes conforming to is ; 13592 type a including jointing with seal ring conforming to is ; 5382 leaving 10 mm gap for thermal expansion. coupler 110 mm diameter , phe 30 providing, fixing on wall face unplasticised pvc moulded fittings / accessories for unplasticised rigid pvc rain water pipes conforming to is ; 13592 type a including jointing with seal ring conforming to is ; 5382 leaving 10 mm gap for thermal expansion. bend 87.5 deg 110 mm diameter , phe 31 providing, fixing on wall face unplasticised pvc moulded fittings / accessories for unplasticised rigid pvc rain water pipes conforming to is ; 13592 type a including jointing with seal ring conforming to is ; 5382 leaving 10 mm gap for thermal expansion. shoe 110mm shoe , phe 32 providing & fixing unplasticised pvc pipe clips of approved design to unplasticised pvc rain water pipes by means of 50x50x50mm hard wood plugs, screwed with .m.s. screws of required length including cutting brick work and fixing in cement mortar 1:4 ( 1cement : 4 coarse sand ) and making good the wall etc. complete.110 mm dia , phe 33 providing and fixing cpvc pipes having thermal stability for hot and cold water supply including all cpvc plain and brass threaded fittings including fixing the pipe with clamps at 1.00 mt spacing. this includes jionting of pipes and fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge. 20 mm nominal outer dia pipes , phe 34 providing and fixing of gun metal gate valve with ci wheel of approved quality ( screwed ends ) 25mm dia, nominal bore , phe 35 providing and fixing of gun metal gate valve with ci wheel of approved quality ( screwed ends ) 32 mm dia, nominal bore , phe 36 providing and fixing gun metal non return valve of approved quality ( pn 1.6 ) 40 nominal bore , phe 37 providing and fixing brass stop cock of approved quality15mm nominal bore , ex. phe 6 providing 250mm wide brick drain in cement mortar ( 1:6 ) with av. 150mm.clear depth and 250mm apron including cost of e / w. involved with 75mmcement concrete ( 1:4:8 ) over one brick designation 100 a flat soling inproper grade and slope at the base.the drain duly.plastered in cm. ( 1:3 ) with punning over exposed surface all complete as per buildingspecification and direction of e / l, , ex. phe 7 excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottom depth upto 1.5 m including getting out the excavated soil ( hard or soft ) and then returning the soil as required in layers not exceeding 20 cms in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed within a lead of 50m. [ hard / dense soil ] pipes, cables etc.exceeding 80mm dia.but not exceeding 300mm dia. , ex. phe 8 excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottom depth upto 1.5 m including getting out the excavated soil ( hard or soft ) and then returning the soil as required in layers not exceeding 20 cms in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed within a lead of 50m. [ hard / dense soil ] pipes, cables etc.exceeding 80mm dia. exceeding 300mm dia. , ex. phe 9 providing and laying non pressure np2 class ( light duty ) rcc pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement : 2 fine sand ) including testing of joints etc. complete. ( for storm drainage ) 250 mm dia rcc pipe , ex. phe 10 providing and laying non pressure np2 class ( light duty ) rcc pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement : 2 fine sand ) including testing of joints etc. complete. ( for storm drainage ) 300 mm dia rcc pipe , ex. phe 11 providing and laying non pressure np2 class ( light duty ) rcc pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement : 2 fine sand ) including testing of joints etc. complete. ( for storm drainage ) 450 mm dia rcc pipe , ex. phe 12 inside size 120x90 cm and 90 cm deep including c.i. cover with frame ( medium duty ) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg ( weight of cover 58 kg and weight of frame 58 kg ) :with common burnt clay f.p.s. ( non modular ) bricks of class designation 7.5 , ex. phe 13 providing and fixing square mouth sw gully trap grade ‘a’ complete ci grating brick masonry chamber with bricks of class designation 75 and water tight ci cover with frame of 300 x 300 mm size ( inside ) the weight of cover to be not less than 13.00 kg and frame to be not less than 5 kg. as per standard design. ( cover min. 4.5 kg & frame min.2.7 kg ) 180x150 mm size p type with fps bricks , ex. phe 14 constructing masonry chamber 30x30x50 cm, inside with 75 class designation brick work in cement mortar 1:4 ( 1 cement:4 coarce sand ) for stop cock complete with c.i. surface box 100x100x75mm ( inside ) with locking arrangement and rcc top slab 1:2:4 mix ( 1 cement : 2 corase sand: 4 graded stonr aggregate 20mm nominal size ) necessary excavation foundation concret 1:5:10 ( 1 cement:5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortor 1:3 ( 1 cement : 3 coarse sand ) 12 mm thick finished with a floating coat of neat cement complete as per standard design. , ex. phe 15 constructing masonry chamber 60x60x75 cm, inside with 75 class designation brick work in cement mortar 1:4 ( 1 cement: 4 coarse sand ) for sluice valve, with c.i. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside ) with channel lid and rcc top slab 1:2:4 mix ( 1 cement: 2 coarse sand: 4 graded stone sggregate 20 mm nominal size ) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 ( 1 cement: 3 coarse sand ) 12 mm thick finished with a floating coat of neat cement complete as per standard design:with f.p.s. bricks , ex. phe 16 structual steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. , ex. phe 17 making connection of gi distribution branch with gi main of 50 80mm nominal bore by providing and fixing tee, including cutting and threading the pipe etc. complete. , rain water harvesting 1 boring / drilling bore well of required dia for casing / strainer pipe, bysuitable method prescribed in is:2800 ( part i ) , including collecting sample from different strata , preparing and submitting strata chart / bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of engineer in charge, upto 90m depth below ground level.300 mm dia , rain water harvesting 2 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized plc. medium well casing ( cm ) pipe of required dia, conforming to is: 12818, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per director of engineer in charge.150mm nominal size dia , rain water harvesting 3 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized plc. medium well screen ( rms ) pipes with ribs, conforming to is: 12818, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per director of engineer in charge.150 mm nominal size dia , rain water harvesting 4 supplying, filling, spreading & levelling stone boulders of size range 5cm to 20cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of engineer in charge. , rain water harvesting 5 supplying, filling, spreading & levelling gravel of size range 5mm to 10mm, in recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of engineer in charge. , rain water harvesting 7 providing and fixing bail plug / bottom plug of required dia to the bottom of pipe assembly of tube well as per is:2800 ( part i ) . 100 mm dia , rain water harvesting 8 making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and s.w. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. with common burnt clay f.p.s. ( non modular ) bricks of class designation 7.5 , rain water harvesting 9 constructing soak pit 1.20x1.20x1.20 m filled with brickbats including s.w. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. with common burnt clay f.p.s. ( non modular ) bricks of class designation 7.5 , tubewell 1 boring / drilling bore well of required dia for casing / strainer pipe, bysuitable method prescribed in is:2800 ( part i ) , including collecting sample from different strata , preparing and submitting strata chart / bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of engineer in charge, upto 90m depth below ground level.300 mm dia , tubewell 2 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized plc. medium well casing ( cm ) pipe of required dia, conforming to is: 12818, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per director of engineer in charge.150mm nominal size dia , tubewell 3 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized plc. medium well casing ( cm ) pipe of required dia, conforming to is: 12818, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per director of engineer in charge.100mm nominal size dia , tubewell 4 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized plc. medium well screen ( rms ) pipes with ribs, conforming to is: 12818, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per director of engineer in charge.100 mm nominal size dia , tubewell 5 supplying, filling, spreading & levelling stone boulders of size range 5cm to 20cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of engineer in charge. , tubewell 6 providing and fixing bail plug / bottom plug of required dia to the bottom of pipe assembly of tube well as per is:2800 ( part i ) . 100 mm dia , submersible pump 35m deep boring with casing and pipe. supply of pipe etc supplying & installation of suitable 2hp submersible pump b.s or k.s.bor equivalent make with finolex cable 1x3x2.5 squmm ( upto 50mtr ) withflexible conduit 25mm dia, electrical out door pannel with required electrical fitting such as mcb of 0 25amp ( havell or indocopp or mds make ) , volt & ampere meter ( ae make ) , single phase preventer ( minilac or vsp 1 make ) starter ( l&t or bch make ) etc of approved make, 40mm hdpe pipe ( 25 mtr ) and all accessories complete as per requirement of site. , water purifier and cooler 1 fitting and fixing single faucet storage type water cooler ( size 461 mm wide x 582 mm deep x 1217 mm height, weight 46 kg ) fully stainless body having storage capacity of 40 ltrs, cooling capacity of 40 ltrs. / hr. with hermetic type compressor, gas cooled motor equipped with over load protector, condensor for propeller type, thermostat autometically controlled temperature, refrigerent r 22, 230 volt, single phase 50 hertz, maximum current 2.3 amp including plug top and electrical lead wire connection upto 3 metres from the cooler, water inlet and drain out connections complete in all respects of voltas model no 40 / 40 tushar pss type or similar type of approved make. , water purifier and cooler 2 fitting and fixing water purifier for drinking purpose of capacity 6 litres / min, 5 purification system with reverse osmosis system with ultra ventilated membrane, tds500 to 2000 mgl / ppm, auto shut off with microswitch float manual flush facility, tds reduction 90% having automatic backwash system with filteration unit along with all accessories including plug top and electrical lead wire connection upto 3 metres from the purifier, water inlet and drain out connections complete in all respects similar to aquaguard or similar approved make ( model aquasure elegant ro water purifier of size width 360 mm x height 430 mm x depth 235 mm and weight 8.5 kg ) . , fire extinguisher 1 providing and fixing carbon di oxide type fire extinguishers consisting of welded m.s. cylindericalbody, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket conforming to is:15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge. capacity 4.5 kg. , fire extinguisher 2 providing and fixing abc powder type fire extinguishers consisting of welded m.s. cylindericalbody, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket conforming to is:15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge.capacity 6.0 kg. , electrical 1 wiring for light point / fan point / exhaust fan point / call bellpoint with 1.5 sq.mm frls pvc insulated copper conductorsingle core cable in surface / recessed steel conduit, withmodular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm frls pvc insulated copper conductor single core cable etc. as required. group c , electrical 2 wiring for twin control light point with 1.5 sq.mm frls pvcinsulated copper conductor single core cable in surface / recessed steel conduit, 2 way modular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm. frls pvc insulated copper conductor single core cable etc. as required. , electrical 3 wiring for group controlled ( looped ) light point / fan point / exhaust fan point / call bell point ( without independent switch etc. ) with 1.5 sq. mm frls pvc insulated copper conductor single core cable in surface / recessed steel conduit, and earthing the point with 1.5 sq. mm frls pvc insulatedcopper conductor single core cable etc. as required. group c , pvc conduit 1 supplying and fixing of following sizes of medium class 20mmpvc conduit along with accessories in surface / recessincluding cutting the wall and making good the same incase of recessed conduit as required. , pvc conduit 2 supplying and fixing of following sizes of medium class 32mmpvc conduit along with accessories in surface / recessincluding cutting the wall and making good the same incase of recessed conduit as required. , pvc conduit 3 supplying and fixing of following sizes of medium class 50mmpvc conduit along with accessories in surface / recessincluding cutting the wall and making good the same incase of recessed conduit as required. , electrical 4 wiring for light / power plug with 2x4 sq. mm frls pvcinsulated copper conductor single core cable in surface / recessed conduit alongwith 1 no. 4 sq. mm frls pvcinsulated copper conductor single core cable for loop earthingas required. , wiring frls pvc insulated copper conductor 1 2 x 2.5 sq. mm. + 1 x 2.5 sq. mm. earth wire , wiring frls pvc insulated copper conductor 2 2 x 6 sq.mm. + 1 x 6 sq.mm. earth wire , wiring frls pvc insulated copper conductor 3 4 x 6 sq. mm + 2 x 6 sq. mm earth wire , wiring frls pvc insulated copper conductor 4 4 x 10 sq. mm + 2 x 6 sq. mm earth wire , wiring frls pvc insulated copper conductor 5 4 x 16 sq. mm + 2 x 16 sq. mm earth wire , s / f, gi box along with modular base & cover plate 1 or 2 module ( 75mm x 75mm ) , s / f, gi box along with modular base & cover plate 1 3 module ( 100mm x 75mm ) , s / f, gi box along with modular base & cover plate 2 4 module ( 125mmx75mm ) , s / f, gi box along with modular base & cover plate 3 6 module ( 200mm x 75mm ) , s / f, gi box along with modular base & cover plate 4 12 module ( 200mmx150mm ) , s / f modular switch / socket on the existing modular plate 5 / 6 amps switch , s / f modular switch / socket on the existing modular plate 2 15 / 16 amp switch , s / f modular switch / socket on the existing modular plate 3 3 pin 5 / 6 amp socket outlet , s / f modular switch / socket on the existing modular plate 4 6 pin 15 / 16 amp socket outlet , s / f modular switch / socket on the existing modular plate 5 telephone socket outlet , s / f modular switch / socket on the existing modular plate 6 tv antenna socket outlet , s / f modular switch / socket on the existing modular plate 7 bell push , electrical 5 supplying & fixing suitable size gi box wih modular plate and cover in front on surface or in recess including providing and fixing 25 a modular socket outlet and 25 a modular sp mcb, “c” curve including connections, painting etc. as required. ( for ac / geyser ) , electrical 6 supplying and drawing co axial tv cable rg 6 grade, 0.7 mm solid copper conductor pe insulated, shielded with fine tinned copper braid and protected with pvc sheath in the existing surface / recessed steel / pvc conduit as required. , electrical 7 supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. , electrical 8 providing and fixing m.s. fan clamp type i or ii of 16 mm dia m.s. bar, bent to shape with hooked ends in r.c.c. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete as required. , electrical 10 supplying and fixing 20 a, 240 v, spn industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 a c curve, sp, mcb, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required. , electrical 11 supplying and fixing 20 a, 415 v, tpn industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 20 a c curve, tpmcb, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioningetc. as required. , electrical 12 supplying and fixing 30 a, 415 v, tpn industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 a c curve, tpmcb, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioningetc. as required. , electrical 13 supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 8 way , double door , electrical 14 supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 12 way , double door , electrical 15 supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 16 way, double door , electrical 16 supplying and fixing following way, horizontal type three pole and neutral, sheet steel, mcb distribution board, 415 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 6 way ( 4 + 18 ) , double door , electrical 17 supplying and fixing following way, horizontal type three pole and neutral, sheet steel, mcb distribution board, 415 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 8 way ( 4 + 24 ) , double door , electrical 18 supplying and fixing of following ways surface / recess mounting, vertical type, 415 v, tpn mcb distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 a tinned copper bus bar, common neutral link, earth bar, din bar for mounting mcbs ( but without mcbs and incomer ) as required . ( note : vertical type mcb tpdb is normally usedwhere 3 phase outlets are required. ) 4 way ( 4 + 12 ) , double door , 40 a, rccb supplying and fixing following rating, double pole, ( single phase and neutral ) , 240 v, residual current circuit breaker ( rccb ) , having a sensitivity current 30 ma in the existing mcb db complete with connections, testing and commissioning etc. as required. , 40a mcb supplying and fixing 40 a rating, 240 / 415 v, 10 ka, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. 40 tp mcb , single pole mcb supplying and fixing 5 a to 32 a rating, 240 / 415 v, 10 ka, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. , 40a 4p mcb supplying and fixing of following mcbs, 415 volts, c curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing mcb db complete with connections, testing and commissioning etc. as required. , 63a 4p mcb supplying and fixing of following mcbs, 415 volts, c curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing mcb db complete with connections, testing and commissioning etc. as required. , 100a 4p mcb supplying and fixing of following mcbs, 415 volts, c curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing mcb db complete with connections, testing and commissioning etc. as required. , l / f pvc sheathed / xlpe power cable in trench laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. above 95 sq. mm and upto 185 sq. mm , l / f pvc sheathed / xlpe power cable in trench 1 laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. above 185 sq. mm and upto 400 sq. mm , l / f pvc sheathed / xlpe power cable over cable tray upto 35 sq. mm ( clamped with 1mm thick saddle ) , l / f pvc sheathed / xlpe power cable over cable tray 2 above 35 sq. mm and upto 95 sq. mm ( clamped with 25x3mm ms flat clamp ) , l / f pvc sheathed / xlpe power cable over cable tray 3 above 95 sq. mm and upto 185 sq. mm ( clamped with 25 / 40x3mm ms flat clamp ) , l / f pvc sheathed / xlpe power cable over cable tray 4 above 185 sq. mm and upto 400 sq. mm ( clamped with 40x3mm ms flat clamp ) , s / m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 3.5c x 300 sqmm, aluminium conductor cable a2xfy , s / m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 1 3.5c x 240 sqmm, aluminium conductor cable a2xfy , s / m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 2 3.5c x 120 sqmm, aluminium conductor cable a2xfy , s / m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 3 3.5c x 95 sqmm, aluminium conductor cable a2xfy , s / m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 4 3.5c x 50 sqmm, aluminium conductor cable a2xfy , s / m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 5 4c x 35 sqmm aluminium conductor cable a2xfy , cable tray supplying and installing following size of perforated hot dipped galvanised iron cable tray ( galvanisation thickness not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required. 100 mm width x 50 mm depth x 1.6 mm thickness , cable tray 1 supplying and installing following size of perforated hot dipped galvanised iron cable tray ( galvanisation thickness not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required. 300 mm width x 50 mm depth x 1.6 mm thickness , cable tray 2 supplying and installing following size of perforated hot dipped galvanised iron cable tray ( galvanisation thickness not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required. 600 mm width x 62.5 mm depth x 2.0 mm thickness , cable tray “bends” supplying and installing following size of perforated hot dipped galvanised iron cable tray “bends” ( galvanisation not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required.100 mm width x 50 mm depth x 1.6 mm thickness , cable tray “bends” 1 supplying and installing following size of perforated hot dipped galvanised iron cable tray “bends” ( galvanisation not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required.150 mm width x 50 mm depth x 1.6 mm thickness , cable tray “bends” 2 supplying and installing following size of perforated hot dipped galvanised iron cable tray “bends” ( galvanisation not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required.300 mm width x 50 mm depth x 1.6 mm thickness , cable tray “bends” 3 supplying and installing following size of perforated hot dipped galvanised iron cable tray “bends” ( galvanisation not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required.450 mm width x 50 mm depth x 2 mm thickness , cable tray “bends” 4 supplying and installing following size of perforated hot dipped galvanised iron cable tray “bends” ( galvanisation not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required.600 mm width x 62.5 mm depth x 2.0 mm thickness , mv cable supplying following 1.1kv grade, xlpe insulated, frls type, heavy duty armoured cables suitable for 415v, 50hz, ac system, with inner and outer pvc sheath, outer sheath provided with frls insulation, galvanised steel armouring ( round ( w ) or flat ( f ) as mentioned ) and with all components as mentioned , specifications, complete as required.3.5c x 300 sqmm, aluminium conductor cable a2xfy , mv cable 1 supplying following 1.1kv grade, xlpe insulated, frls type, heavy duty armoured cables suitable for 415v, 50hz, ac system, with inner and outer pvc sheath, outer sheath provided with frls insulation, galvanised steel armouring ( round ( w ) or flat ( f ) as mentioned ) and with all components as mentioned , specifications, complete as required.3.5c x 240 sqmm, aluminium conductor cable a2xfy , mv cable 2 supplying following 1.1kv grade, xlpe insulated, frls type, heavy duty armoured cables suitable for 415v, 50hz, ac system, with inner and outer pvc sheath, outer sheath provided with frls insulation, galvanised steel armouring ( round ( w ) or flat ( f ) as mentioned ) and with all components as mentioned , specifications, complete as required.3.5c x 120 sqmm, aluminium conductor cable a2xfy , mv cable 3 supplying following 1.1kv grade, xlpe insulated, frls type, heavy duty armoured cables suitable for 415v, 50hz, ac system, with inner and outer pvc sheath, outer sheath provided with frls insulation, galvanised steel armouring ( round ( w ) or flat ( f ) as mentioned ) and with all components as mentioned , specifications, complete as required.3.5c x 95 sqmm, aluminium conductor cable a2xfy , earthing earthing with g.i. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal / coke and salt as required. , earthing 1 earthing with g.i. earth plate 600 mm x 600 mm x 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal / coke and salt as required. , earthing 2 earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal / coke and salt as required. , earthing 3 providing and fixing 6 swg dia g.i. wire on surface or in recess for loop earthing along with existing surface / recessed conduit / submain wiring / cable as required. , earthing 4 providing and fixing 25 mm x 5 mm g.i. strip on surface or in recess for connections etc. as required. , earthing 5 providing and fixing 25 mm x 5 mm copper strip on surface or in recess for connections etc. as required. , earthing 6 providing and fixing earth bus of 50 mm x 5 mm copper strip on surface for connections etc. as required. , fiting & fixtures 1 supply and installation of regular / standard model a.c. ceiling fan of 1400 mm sweep including wiring the down rods of standard length ( upto 30 cm ) with 1.5 sq. mm fr pvc insulated copper conductor etc as required. , fiting & fixtures 2 supplying and fixing single wall mounted 18 / 22 watt led type batten fitting complete with electronic driver and led tube etc directly on wall / ceiling includingconnections with 1.5 sq.mm fr pvc insulated copper conductor and earthing the body etc. as required. , fiting & fixtures 3 supply installation and comissioning ofintegrated batten made ( 2ft ) of ultra slim co extruded polycarbonate channel with housing part in white finish & diffuser part in reeded opal finish.white finish abs end caps with decorative circular coloured polycarbonate cap snap fitted on the end cap to enhance the aesthetic of the fixture. these end caps are snap fitted to the fixture.high efficiency long life led with lumen efficacy of 130 lm / w with viewing angle of 120º.powered by an integral isolated low thd electronic led driver ( smps based constant current supply ) with output short circuit protection, surge protection.can be fixed directly into the wall / ceiling by means of mounting ss clips provided with the fixture. ip 20, lumen output of 950 lumens with system efficacy of > 105lm / w .cri >80, color temperature 6500k, thd <20% and pf>0.95, ip20 . life class of 35, 000 hrs @ l70, operating temperature: 10 to +45 deg.c; input supply voltage range:140 270 v, frequency :50 60 hz;internal surge protection:3 kv; protection including 3 core 1.5 sq.mm frls pvc insulated and pvc sheathed copper conductor cable and earthing etc. up to suitable point complete as required. : reverse polarity, open & short circuit. driver safety requirement standards :is 15885 2 13, test report to be submitted; photo biological safety norms: is 16108, test certificate to be submitted; certification: lm 79 for luminaire lm 80 for led source. cat ref havells :lumilinebs9wled840spcwh or approved equivalent. , fiting & fixtures 4 supplying and fixing recess mounted 12 watt led vertical downlighter complete with all accessories and replaceable electronic driver, directly on false ceilingincluding connection with 1.5 sq.mm fr pvc insulated copper conductor cable and earthing the body etc. as required. , fiting & fixtures 5 supplying and fixing recess mounted 18 watt led vertical downlighter complete with all accessories and replaceable electronic driver, directly on false ceilingincluding connection with 1.5 sq.mm fr pvc insulated copper conductor cable and earthing the body etc. as required. , fiting & fixtures 6 supply, installation, testing and commissioning of 400 mm sweep, 65w, blade material aluminium blades , speed & oscillation 3 speed, pull cord for speed and oscillation.air delivery minimum 72 m³ / min, speed minimun 1350 revolution per minute.suitable for 230 v, 50 hz, single phase ac supply, earthing etc. complete as required. , fiting & fixtures 7 supply installation and comissioning of 28w 2x2 panel recess mounting luminaire with high performance leds, suitable for mounting with armstrong / grid ceiling.crca powder coated white after phosphochromate treatment.high efficiency long life led package in integral module with lumen efficacy of >100 lm / w and viewing angle of 120° to ensure better uniformity.powered by an independent isolated, selv output electronic led driver ( smps based constant current supply ) with output short circuit protection, surge protection & other reliability test. lumen output of 3450 lumens.cri >80, color temperature 5700k, thd <10% and pf >0.95, ip20, ik03.life class of 50, 000 hrs @ l70, operating temperature: 10 to +45 deg.c; input supply voltage range:140 270 v, frequency :50 60 hz;internal surge protection:3 kv; protection including 3 core 1.5 sq.mm frls pvc insulated and pvc sheathed copper conductor cable and earthing etc. up to suitable point complete as required. : reverse polarity, open & short circuit. driver safety requirement standards :is 15885 2 13, test report to be submitted; photo biological safety norms: is 16108, test certificate to be submitted; certification: lm 79 for luminaire lm 80 for led source.cat ref havells :venusneohe2x2plr128wled857 or approved equivalent. , fiting & fixtures 8 supplying installation testing & commissioning ofb22 based 9w led 3 star bulb with 850 lumen, 6k color temperature including holder. , fiting & fixtures 9 supplying installation testing & commissioning of black painted extruded aluminium housing. green / red led’s mounted inside the housing. laser engraved signage matter on single / double acrylic sheet fixed on one side suitable for wall / ceiling / suspension type single / double sided display. in double sided version black paper is inserted. ni cd battery back up to 2 hrs. ( charged up to 8 10 hrs ) .mounting strings provided for pendent mounting operating voltage 150 280v ac ambient operating temperature. – 0 to 450c ingress protection – ip42.including 3 core 1.5 sq.mm frls pvc insulated and pvc sheathed copper conductor cable and earthing etc. up to suitable point complete as required. 220208 besl 03 led ssd wbb green 240 3 8wor220209 besl 03 led ssd wbb red 240 3 8wor220210 besl 03 led dsd wbb green 240 3 8wor220211 besl 03 led dsd wbb red 240 3 8w , fiting & fixtures 10 supply, installation, testing & erecting of ip66 bulkhead surface type lighting fixture 10w made up of pressure die cast aluminium housing and polyster powder coated die cast aluminium with high quality polycarbonate diffuser in opal finish for glare free light distribution.high efficiency long life led module with smd led package mounted on mcpcb with lumen efficacy of >95 lm / w with system lumen 950. powered by integral electronic led driver with apfc with low thd output short / open circuit protection. cct 5700, cri>80, system efficacy>90lm / w, thd<15%, pf>.95, ip66, ik 10, life class of 50, 000 hrs @ l70, operating temperature: 10 to +45 deg.c; input supply voltage range:140 270 v, frequency :50 60 hz.including 3 core 1.5 sq.mm frls pvc insulated and pvc sheathed copper conductor cable and earthing etc. up to suitable point complete as required. cat ref: havells : hexaft10wled857ssymbopc or approved equivalent. , civil & misc works1 providing and fixing m.v. danger notice plate of 200 mm x 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. , civil & misc works2 providing and fixing h.t. danger notice plate of 250 mm x 200 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. , civil & misc works3 supplying and making cable route marker with cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) of size 60 cm x 60 cm at the bottom and 50 cm x 50 cm at the top with a thickness of 10cm including inscription duly engraved as required. , civil & misc works4 supplying and fixing cable route marker with 10 cm x 10 cm x 5 mm thick g.i. plate with inscription there on, bolted / welded to 35 mm x 35 mm x 6 mm angle iron, 60 cm long and fixing the same in ground as required. , civil & misc works5 providing & fixing in position 1000 mm wide , electrical insulating rubber mats as per is 15652:2006, 2 mm thick, suitable up to 1.1 kv , fire retardant, no effect of acids, alkalis and transformer oils, moisture proof, high tensile strengthandtexture finish / cloth impression ( anti slip , marking on top ) , civil & misc works6 supply & fixing shock treatment chart duly mounted on a wooden frame with 5 mm thick glass as required ( approx front area 1.20 sq metre ) , 40 kvaups supplying, installation, testing and commissioningof online double conversion fully microprocessor based , indoor type, compact ups system of following rating with igbt based pwm technology to achieve thd < 3% and input power factor of greater than 0.95 at 50% loading, suitable for three phase ac input voltage 380 v to 440 v, 50 hz +3% / 3 % and three phase ac output voltage 415 ± 1% volts & frequency 50 ± 0.5 hz , inbuilt isolation transformer, necessary vrla batteries of suitable size having 30 minutes back up time , mounting rack including and suitable size connecting cable ( for ups to battery and battery to battery ) , static and maintenance bypass switch, snmp card for rs232 / ethernet ip computability for operation and monitoring etc. with all components as mentioned , specifications, complete as required.note : concerning vendor needs to furnish the battery sizing calculations at the time of ga approval and battery size has to be as per the approved ga drawing. , external lighting 1 supply and erection of 4 metre height hot dipgalvanized octagonal street light pole with followingarm with top dia 70 mm and bottom dia a / f 130 mm, made of 3 mm thick sheet along with base plate of size220 x 220 x 12 mm , small door opening for junctionbox mounting with mcb & connector, cement concreteof 1:3:6 including excavation, refilling and suitable sizefoundation bolts with template and all complete jobasrequired. ( but without pole collar ) single arm , external lighting 2 supplying and fixing 40 / 45 watt led type street lightwith die cast aluminium housing for ingress protectionof ip65 and complete with all accessories etc, onpole / building including connection with fr pvcinsulated copper conductor cable and earthing thebody etc. as required. , ip based cctv system 1 sitc of 2 megapixel @ 25fps, h.265 ip bullet camera, 1 / 2.9 cmos with 2.8~12mm varifocal lens, 0 lux with night vision ir up to 30 mtrs.support intelligent analytics like abnormal video signal detection, video mask, heartbeat, password protection. supports digital wdr, icr, true d / n, 3d dnr, roi coding, poe, onvif, ip66 etc. complete as required. , cctv 2 sitc of 2 megapixel @ 25fps, h.265 ip dome camera, 1 / 2.9 cmos with 3.6 fixed mm 0 lux with night vision ir up to 30 mtrs.support intelligent analytics like abnormal video signal detection, video mask, heartbeat, password protection. supports digital wdr, icr, true d / n, 3d dnr, roi coding, poe, onvif, ip66 etc. complete as required. , cctv 3 sitc of 2 megapixel @ 25fps, ptz camera h.265 ip dome camera, 1 / 2.9 cmos with 2.6 fixed lenslux with night vision ir up to 30 mtrs.support intelligent analytics like abnormal video signal detection, video mask, heartbeat, password protection. supports digital wdr, icr, true d / n, 3d dnr, roi coding, poe, onvif, ip66 etc. complete as required. , cctv 4 sitc of 32ch 4k ivr , h.265 / h.264 • 1080p real time • 4k display • dual lan • 8x hdd • raid •web plugin free h.265 / h.264 compression technology 4k display for clear monitoring up to 1080p 16ch decoding ability smart search ii smart vca event searchsupport raid 0, 1, 5 supported to prevent from recording data loss browsers supported: ie , smart functions : target count, electric fence, face detection, humaniod detection, retrograde detection, leave position detectio output, local & network backup etc. complete as required. , cctv 5 sitc of harddiskdrive8tb, 24 / 7surveillance category only complete etc as required.etc.all complete , cctv 6 sitc of 55 led narrow bazel for monitoring for nvr server etc. all complete. , cctv 7 sitc of rj 45 outlets near the cameras etc. all complete. etc. all complete. , cctv 8 sitc of cat 6 patch cords 1 meter high quality four pair twisted stranded cable terminated with rj45 modular plugs at both the ends. , signage 1 providing & fixing of building direction signage mounted on pole, with pole of 100x100mm shs ( square hollow section ) of height of 5600mm, and sign size of 900x1050, sign made of aluminiu c section of 60mm with internal framing to support the frame in ms tubes hollow section, frame work duly painted with anti rust coatings, with facia of 3mm thick exterior grade aluminium composite panel, cladded with uv cured digital printed retroreflective sheet of 3m make, and back panel of 3mm exterior grade acp, all pipes to be painted in approved color. cost shall includecost towards installation, including excuvation and filling up with specified pcc and fixing of foundation bolts as specified, also it shall include the designing charges.all complete as per direction by engineer in charge. , signage 4 providing and fixing of signages modular curved frame technology of various widths and lengths to fometre suggested usages made of aluminium extruded sections. duly anodised all signages shall be provided with 0.6 0.8mm polycarbonate protecting film over the prints of appropriate size .all complete as per direction by engineer in charge , wall projected 250x210mm, both sides , signage 5 providing and fixing of signages modular curved frame technology of various widths and lengths to fometre suggested usages made of aluminium extruded sections. duly anodised all signages shall be provided with 0.6 0.8mm polycarbonate protecting film over the prints of appropriate size .all complete as per direction by engineer in charge, door mounted, 300x80mm , 2 tr air conditioning 1 split ac ( inverter model ) : supply, installation, testing, commissioning of split type wall mounted air conditioning units of following capacity including inddor, outdoor unit fitted with inverter based rotary compressor fitted with rotary compressor, copper condensor and first charge refrigent r410a / eco friendly green gas only, all complete including all electrical connections to the electrical power supply system of the building, includingbut not limited to supply of all electrical plugs, etc., as necessary, lengthening of all electrical wires of ac units ( both indoor and outdoor ) , drain pipe andincluding suitable voltage stabilisers, etc. so as to place them in a concealed manner in the desired position. the copper pipes and electrical cables shall be concealed in approved manner and neatly run in straight lines in a workman like manner with proper supports. complete supply and installation of split2 tr star rating 3 star , refrigerant piping copper piping: supply, installation, providing, testing and commisioning of interconnectiong copper refrigent pipe work ( 19mm / 13 mm thick ) duly insulated with elastomeric nitrile rubber, joints shall be covered with nitrile tape of 3mm thick complete as per specification soft refrigerant copper piping as per specifications and drawings. 25 mm od, wall thickness >= 1.2 mm ( insulation 19 mm thick ) , refrigerant piping 1 copper piping: supply, installation, providing, testing and commisioning of interconnectiong copper refrigent pipe work ( 19mm / 13 mm thick ) duly insulated with elastomeric nitrile rubber, joints shall be covered with nitrile tape of 3mm thick complete as per specification soft refrigerant copper piping as per specifications and drawings. 19.1 mm od, wall thickness >= 1.0 mm ( insulation 13 mm thick ) , refrigerant piping 2 copper piping: supply, installation, providing, testing and commisioning of interconnectiong copper refrigent pipe work ( 19mm / 13 mm thick ) duly insulated with elastomeric nitrile rubber, joints shall be covered with nitrile tape of 3mm thick complete as per specification soft refrigerant copper piping as per specifications and drawings. 15.9 mm od, wall thickness >= 0.8 mm ( insulation 13 mm thick ) , refrigerant piping 3 copper piping: supply, installation, providing, testing and commisioning of interconnectiong copper refrigent pipe work ( 19mm / 13 mm thick ) duly insulated with elastomeric nitrile rubber, joints shall be covered with nitrile tape of 3mm thick complete as per specification soft refrigerant copper piping as per specifications and drawings. 9.5 mm od, wall thickness >= 0.8 mm ( insulation 13 mm thick ) , drain piping providing and fixing of cpvc 6 kg / cm2 drainpiping complete with fittings, supports, 6 mm thick closed cell elastomeric insulation as per specifications and drawings. 20 mm , drain piping 1 providing and fixing of cpvc 6 kg / cm2 drainpiping complete with fittings, supports, 6 mm thick closed cell elastomeric insulation as per specifications and drawings. 32 mm , main oxygen manifold supply, installation, testing and commissioning of following gas manifold system ( excluding cylinders ) . the manifold is configured for designed numbers of cylinders and is suitable to withstand a pressure of 145 kg / cm2, along withhigh pressure copper annealed tail pipes with end brass adapter suitable for cylinders and manifold. top frame comprising of high pressure copper pipes of size 1 / 2” nb x 15swg with high pressure brass fittings made of high tensile brass and connections through nonreturn valves, the design of middle and bottomframes is provided to fit both round and flat bottom cylinders safely. the manifold is tested ( hydraulically ) at 3500 psig. ( it should be ce and iso 13485 certified ) mani fold oxygen manifold 6 + 6 cylinder banks complete with nrv, middle frame, bottom frame with ce marked, , emergency manifold emergency oxygen manifold 01 + 01 cylinder emergency manifold with complete regulator, nrv, middle frame & bottom frame, , control panelfor oxygen fully automatic three port control panel for oxygen supply, installation, testing and commissioning of automatic manifold control panel would provide a duty or standby gas supply from two cylinder banks with automaticchangeover the manifold indicates local status and has a remote indicator facility. automaticmanifold control panel would be designed to supply the mgps with a constant pressure supply via a control panel form two equal banks of cylinders and the changeover from the ‘duty’ to the ‘standby’ bank of cylinders would beautomatic. automatic changeover from the duty to the standby bank would occur at a cylinder pressure that will ensure the maximum usage of the contents of the duty bank. the changeover unit would be provided with monitoring todetect and display: duty bank operating, duty bank empty, standby bank operating, and standby bank below 10 % when the duty bank is empty, reserve bank low, pipeline pressure fault. there would be facility to connect liquidoxygen supply ( i.e. three port control panel ) ( it should be ce and iso 13485 certified ) fully automatic three port control panel for oxygen , emergency manifold line regulator emergency manifold line regulator supply, installation, testing and commissioning of emergency manifold line regulator i n p u t p r e s s u r e 1 5 0 k g / c m 2 working pressure 4 kg / cm2 it should be ce and iso 13485 certified.oxygen input pressure 150 kg / cm2 working pressure 4 kg / cm2capacity : 1500 lpm , cylinderconnectingpipe ( pig tail ) supply, installation, testing and commissioning of cylinder connecting pipe ( pig tail ) made up of flexible ss hose with safety cord 5 / 8 inch bsp gland nut and one side 1 / 2 inch bsp internal threads having one meter length. ( oxygen 24 , n2o 10, co2 4 ) , backpressurecompensated [ bpc ] oxygen flowmeter supply, installation, testing and commissioning of back pressure compensated [ bpc ] oxygen flow meter body should be made of brass material dully chrome plated and graduated from 0 15 l / m on an expanded lower scale forprecision setting at low flow and 5 15 l / m for general use. the humidifier bottle should be made up of unbreakable polycarbonate / polysulphone material and autoclavable at 121 degree centigrade temperature. it should be ceand iso 13485 certified. , oxygen gas outletfront loadeddin / bsstd gas outlet front loaded din / bs std:supply, installation, testing and commissioning of din / british standard gas outlets are for use with medical gas system. the gas outlets completely complywith htm2002 and c11 standard regulations and pass the test of leakage and connector stability. medical gas outlet shall be gas specific for the services indicated and accept only corresponding din / british standard quickconnect adapter. specifically, gas specific indexed to eliminate interchangeability of gas services. the gas outlet is offered in consoletype, wall type with box and hose barb type gas system. it should be ce and iso 13485certified. din / bis std. gas outlets feature and benefits:* comply with htm2002 and c11 standardregulations* color coded according to iso32 color*100% pressure and leak tested* full range of mounting options* available in wall type with box, console typeand hose barb type* gas specific adapters , medical air ( 4 bar ) outletfront loadeddin / bsstd gas outlet front loaded din / bs std:supply, installation, testing and commissioning of din / british standard gas outlets are for use with medical gas system. the gas outlets completely complywith htm2002 and c11 standard regulations and pass the test of leakage and connector stability. medical gas outlet shall be gas specific for the services indicated and accept only corresponding din / british standard quickconnect adapter. specifically, gas specific indexed to eliminate interchangeability of gas services. the gas outlet is offered in consoletype, wall type with box and hose barb type gas system. it should be ce and iso 13485certified. din / bis std. gas outlets feature and benefits:* comply with htm2002 and c11 standardregulations* color coded according to iso32 color*100% pressure and leak tested* full range of mounting options* available in wall type with box, console typeand hose barb type* gas specific adapters , quickconnectadapter din / british standard quick connect oxygen adapter ( safety probe ) , tube oxygen h.p. rubber tube white color, , alarm supply, installation, testing and commissioningof area pressure alarm panel would be witdigital display, closed circuit, self monitoringtype. the alarm would be designed to monitorthe line pressure in piping systems.it should be ce and iso 13485 certified. withfour digit notified no. area line pressure alarm 1 gases , isolation valve, supply, installation, testing and commissioning of the ball valves [ for dividing the pipelines into various zones for the case of maintenance ] the internal ball with full borne is made of stainless steel with teflon seats. these valves are leakproof and needs only quarter turn for its operation [ either fully open or fully closed ] . it should be ce and iso 13485 certified.42mm , isolation valve 2 supply, installation, testing and commissioning of the ball valves [ for dividing the pipelines into various zones for the case of maintenance ] the internal ball with full borne is made of stainless steel with teflon seats. these valves are leakproof and needs only quarter turn for its operation [ either fully open or fully closed ] . it should be ce and iso 13485 certified 28mm , isolation valve 3 supply, installation, testing and commissioning of the ball valves [ for dividing the pipelines into various zones for the case of maintenance ] the internal ball with full borne is made of stainless steel with teflon seats. these valves are leakproof and needs only quarter turn for its operation [ either fully open or fully closed ] . it should be ce and iso 13485 certified 22mm , isolation valve 4 supply, installation, testing and commissioning of the ball valves [ for dividing the pipelines into various zones for the case of maintenance ] the internal ball with full borne is made of stainless steel with teflon seats. these valves are leakproof and needs only quarter turn for its operation [ either fully open or fully closed ] . it should be ce and iso 13485 certified 15mm , isolation valve 5 supply, installation, testing and commissioning of the ball valves [ for dividing the pipelines into various zones for the case of maintenance ] the internal ball with full borne is made of stainless steel with teflon seats. these valves are leakproof and needs only quarter turn for its operation [ either fully open or fully closed ] . it should be ce and iso 13485 certified 12mm , pipeline 1 medical grade copper pipeline ( in mtrs. ) as per en 13348, 12 mm ( od ) x 0.7 mm thickness , pipeline 2 medical grade copper pipeline ( in mtrs. ) as per en 13348, 15 mm ( od ) x 0.9 mm thickness , pipeline 3 medical grade copper pipeline ( in mtrs. ) as per en 13348, 22 mm ( od ) x 0.9 mm thickness , pipeline 4 medical grade copper pipeline ( in mtrs. ) as per en 13348, 28 mm ( od ) x 0.9 mm thickness , pipeline 5 medical grade copper pipeline ( in mtrs. ) as per en 13348, 42 mm ( od ) x 1.2 mm thickness , hospital sheet patient bedtype iii with mattress overall sizes: ( l ) 2268 mm x ( w ) 922 mm x ( h ) 610 mmdescription: sheet bed should be a plain bed used in the recovery ward.material specifications: under structure has a higher diameter tubewhich should provide a sturdy understructure.lying surface area of crcafinish specifications: head board / leg board should be made of frame ms erw roundtube of sections ø19, ø25.4& ø31.75mm, ofthickness1.6 mmprovision for mounting of iv pole and mosquito net pole should be presentfinish specifications: powder coating should be bacteriostatic and thermosetting epoxy polyester, formulated to fulfill the requirements for bacterial protection.all powder coated parts in ral whiteperformance specifications: maximum patient load should be 135 kgthickness mattress: 3+sandwitchconstruction: round corners yeshitlon thickness ( mm ) : 60hitlondensity ( gm / dcm3 ) : 23coir ( both side ) thicknessmm: 20density ( gm / dcm3 ) : 70, drc ( % ) : 22quilting combination / layers:pilled foam – quilting ( one side ) thicknessmm 14pilled foam density gm / dcm3 18pu foam / epe sheet side walling thicknessmm 3total mattress thickness mm 87rexine ( gsm ) : 150note: * finish product thickness should be measure from outer to outer surface. tolerance +5 mm , paediatric bed with mattress paediatric bed of overall sizes in mm: 1500 ( l ) x 850 ( w ) x 1210 ( h ) flat single section bed with grille frame on 4 sides.suitable for children up to 12 years.drop down grill frame on both sides for protection of the patient.material specifications: under structure has a higher diameter tubewhich should provide a sturdy understructure.lying surface area of crcafinish specifications: head board / leg board should be made of frame ms erw roundtube of sections ø19, ø25.4& ø31.75mm, ofthickness1.6 mmprovision for mounting of iv pole and mosquito net pole should be presentfinish specifications: powder coating should be bacteriostatic and thermosetting epoxy polyester, formulated to fulfill the requirements for bacterial protection.all powder coated parts in ral white , bed side locker type i over all dimension :402mmlx422mm wx840mm ht .locker should have one cabinet and one drawer unit .both provided with cam lock .there should be gap between drawer and unit to keep general items for frequesnt use castors are provided for easy handling .drawer made up of crca sheet 1 mm thick and has ball slide for easy operation .top ss 304 sheet 0.8 mm thick castors 50 mmdia , hamdle abs ..powder coating of epoxy polyester , medicinetrolleytype i overall size902mm ( l ) x532mm ( w ) x915mm ( h ) .top shelf should be made of ss 304 sheetof 1 mm thick. supporting legs made of ss304 tubesection 30.30 mm dia.of 1.2 mm thick provided to suppoort the entire structure.ss 304 tube provided at the bottom for placement of instument being used .handle made up of ss 304 tubeof dia dia 16 mmand thickness 1.2 mm provided to handle trolley .and maneuver accordingly. high endurance anti static plastic injection moulded castors of 125 mm dia.ss should be finished in glossy mirror finish. max load capacity of 10 kg / shelf udl , round stooltype i overall sizes diagonal legdia 538 mmh470 min 655max.ss 202 made sheet with spin section of thickness 1mm & should be non corrosive. it should have a diameter of 305mm, seat base is made of ms ring and rectangular tube.en8 screw having dia of 22 mm should be used for height adjustment of the seat base.the hub should be made of ms erw tube having dia of 38mm and thickness 2 mm.the hub should be welded with the legs and it should accommodate and cover the lead screw mechanism.the understructure should consist of 4 legs made up ofms erw tube of diameter 25.4 mm and 1.6mm thick. the press formed pipe leg should give a round & clean look. all the legs should be provided with 4 nos of nylon 6 bush.all metal componentsshould be pre treated with zinc phosphating in 9 tank process and then powder coated with anti microbialepoxy polyster powder coating . all welding should be co2 argon welding to minimise rusting on the welding areas.safe working load must be 135kg , strecher on trolley type i 2005mm ( l ) x666mm ( w ) x827mm ( h ) .the trolley should be made of 31.75 and 25.4 mm dia 1.6 mm thick erw tube.holder for stretcher should be made up of mild steel.castor should be of 200 mm dia , diagonal locking castor.stretcher should be made up oferw tubeof dia 25.4 mm and thickness 1.6 mm.top sheet should be made of crca sheetof thickness 1.2 mm with contour shape to accommodate patient.iv pole holder should be made ofms .maximum safe work load should be 135 kg.to ensure qood quality welding co2 argonprocess should be adhered to.all metal componentsshould be pre treated with zinc phosphating in 9 tank porcess and then powder coated with anti microbialepoxy polyster powder coating.goods should be supplied in knocked down construction to reduce carbon emission. performance test :proof loading test , cycle tests , impact test, salt spray test, castor break test, the manufacturer should compilant with iso 9001, 14001, 13485, ohsas 1800 and ce certification. , doctor desk type x s / f / f executive table main desk should be of dimesion : 1350w x 750d x 750h.the table top should bein white cedar, side panelsin black, while the modestypanel ina combination of black & white cedar. side panels : ( black ) made form 18mm thick plt with pvc lipping.modesty panel : made form 18mm thick plt with pvc lipping. bigger upper panel in black and smaller lower panel in white cedar. made from 18mm thick plt with pvc lipping. mobile pedestal : one box and one filing drawer with 18mm thick plb fronts and top. handles : black powder coated die cast aluminum alloy handles. mobile pedestal and hdu are fitted with central lock. , chair type iii s / f / f executive chair1 ) seat / back assembly: the seat and back are made up of 1.2 cm. thick hot pressed plywood, upholstered withfabric upholstery covers and moulded polyurethane foam. the back foam is designed with contoured lumbar support for extra comfort. the seat has extra thick foam on front edge to give comfort to popliteal area.high back size : 47.5 cm ( w ) x 69.5 cm ( h ) seat size : 47.0 cm. ( w ) x 48.0 cm. ( d ) 2 ) polyurethane foam: the polyurethane foam is moulded with density = 45 + / 2 kg / m 3and hardness = 20 + / 2at 25% compression. 3 ) armrests: the one piece armrests are injection moulded from black co polymer polypropylene. 4 ) center tilt synchro mechanism : the mechanism is designed with the following features:• 360 revolving type. • upright position locking. • tilt tension adjustment.• seat / back tilting ratio of 1:3 ( 60 seat tilt / 180 back tilt ) . 5 ) pneumatic height adjustment : the pneumatic height adjustment has anadjustment stroke of 12.0 cm. 6 ) telescopic bellow assembly : the bellow is 3 piece telescopic type and injection moulded in black polypropylene. 7 ) pedestal assembly : . , staff / visitor chair type i chair of over all size: 58.0cm ( w ) x 56.5cm ( d ) x 87.5cm ( h ) & 48.0cm ( sh ) seat / back assembly: the seat and back are made from chemically treated and seasoned wood, upholstered with plywood, black leather cloth, and u foam.*back size: 46.0cm ( w ) x 27.0cm ( h ) .*seat size: 46.0cm ( w ) x 40.0cm ( d ) .armrest tube: the armrest tube is made of m.s. e.r.w. tube dia. 2.54cm. ( 1” ) x 16bg thick and powder coated.armrest: the armrest is gas assisted injection moulded from black polypropylene.understructure assembly: the understructure assembly is a cantilever type frame made of dia. 2.54cm. ( 1” ) x 14bg. thick m.s. e.r.w. tube and powder coated. , wheel chair type i ( l ) 790 x ( w ) 600 x ( h ) 870mm.foldable frame structure should be made of section 22diax1.2mm a3 carbon steel with chrome finish. cross bar should be made of a3 carbon steel with section 25.4 x 1.2mm.rear wheel:24 inch solid mag wheels with alloy in the rim .integrated handrim provide to drive the wheel chair of section 16x1.2mm a3 carbon steel with chrome finish.front wheel :8 inch hub made of pa polymer and outer with solid rubber.pu molded arm rest & base should be made of abs for better arm support .leatherite strap for calf rest & leatherite cushion for seat.adjustable alluminimum die cast foot rest with updown & swivel type mechanism.handles should be made of moulded rubber grip to push the wheelchair.hand brakes should be provided to lock the wheelchair at desired location.foot pressextended base with molded plastic for better grip.anti rust chrome finsh. safe work load of100 kg , basin stand type i ht 850 mm ss bowl ms tubular frame of dia 25.4 x1.2 mm tube work mounted on three 50 dia.non rusting castors all without brack. ss part finished with matt polish , kick buckettype i overa all dimension of the bucket should be 517 mm ( l ) x 517 mm ( w ) x 210 mm h.it should made of 12.7 mm dia and 1.6 mm thick ss 304 ring. the bowl should be ss made of .8 mm thck .3 nos 50 mm diahigh endurance plasticinjection moulded castors should be provided for the movement.mx load bearing capacity should be 10 kg. , hospital curtain tracks & i.v. tree system supply installation testing & commissioning of cubical tracks system made of powder coated aluminium alloy, stain free polyster fabric , water repellent curtains , smooth movement , non sticking runnner with stainless steel hooks made from mirror finish stainless steel , adjustable height with all accessories. total quantity : 1...