• Home
  • Tender Notice : 46506544

Supply Of Machines And Equipment For Civil Engineering Lab--1 Direct reading transit theodolite 2 with tripod 2 Dumpy level with tripod 3 Prismatic compass with tripod 4 Cross Staff 5 Optical Square 6 Ranging Rod (Steel) 4m 7 Ranging Rod (Steel) 3m 8 Leveling Staff (4m) 9 Leveling Staff (5m) 10 Leveling Staff (6m) 11 Engineers Measuring Chain 30m 12 Metallic Tape 30m, 13 Arrows (Metal) 14 Mallet and pegs (wooden) 15 Spirit Level 16 Invar Tape 30m 17 Surveyor compass 18 Stand 19 Chain 20 Metallic Tape 10m, 21 Pegs 22 Hammer 23 Plane Table and its accessories 24 Metallic Tape 5m, 25 Prism Square 26 Clinometer 27 Tachometer -1 Compaction Factor Apparatus Material of Construction: Special quality low carbon mild steel. 2 Paint quality:-Powder coating 70-80 micron thick for determination of workability determination of concrete mixes of very low workability such as those normally used with concrete, compacted by vibration. Concrete mix having maximum size of aggregate not exceeding 38 mm, can be tested for workability. Compaction Factor Apparatus is complete with hoppers and receiver assembly, Tamping Rod of 16 mm dia x 60 cm long having a Hooper and two trowels. As per IS- 1199, 5515 & BS 1881-103 No’s 2 Slump Test Apparatus Slump Test Apparatus with testing rod and base plate, consisting of Slump Cone, Base plate (200mm and height 300mm) with swivel handle, Tamping rod steel, 16 mm dia x 600 mm length as per ISI 7320 No’s 4 3 Vee bee Consisto meter Material of Construction:Special quality low carbon mild steel with good paint quality Vibrator Table : Min 380*260. Four rubber shock absorbers with A.C. supply motor 415 volts, 3 phase, One metal pot, One slump cone, One swivel arm with metal cone, One graduated rod, One perspex disc. One tamping rod as per IS 1199 No’s 2 4 Cement Mortar Moulds Cement Mortar Mould, Steel, for 70.6mm cube with ISI certification mark, IS:10086, machined with a permissible variation of 0.15mm and finished within tolerances of +0.15mm - 0.10mm No’s 10 5 Cylindrical Moulds Cast Iron, Split Lengthwise 150mm dia x 300mm high with baseplate and top plate No’s 5 6 Cube Moulds Cast Iron, for 150mm Cube with ISI Certification IS:10086 No’s 10 Angle between adjacent interior faces and between interior faces and top and bottom plates of mould-90+/-0.5Deg length of base plate -Min. 280mm Width of base plate -Min. 215mm Machined flat to +/- 0.02 mm of accuracy and finished to within +/- 0.2 mm of specified dimensions. Approx wt minium to14kg 7 Le Chatelier Flask Le-Chatelier Flask, determination of specific gravity of hydraulic cement as specified in IS:4031-1968. Nos 5 8 Le-Chatelier Apparatus Le-Chatelier Mould with IS 269, 712 6392 Part-IX. This unit comprises of a metal sleeve with a hook and set of screw to fit over one of the mould pointers and a clamp to fit on to the other pointer of the mould. Nos 5 9 Standard Vicat’s Apparatus Vicat Apparatus with ISI Certification Mark, IS:5513. Nos 5 10 Needle Vibrator Immersion Type Needle Vibrator, Electrically Operated, Motor-Single Phase 2HP, Needle Dia-40mm Length (including Needle) 4-5 Mtrs. No’s 1 11 Digital Weighing Balance Electronic Balance, Capacity Min: 20kg ± 2g No’s 1 12 Digital Platform Balance Electronic Balance, Capacity Min: 100kg ± 10g No’s 1 13 Trowel made of iron, standard size No’s 10 14 spatulla 100mm, 150mm, 200mm blade of iron No’s 10 15 guinia made of iron, 200mmx 100mm metallic No’s 10 16 spirit level digital, made of brass No’s 10 17 Floor Tile testing machine (Flexure and abrasion) with all accessroies Size: 280×150×100mm: Voltage 220 V: Displacement measurement error ≤0.01mm, Temperature record value error: ±1% No’s 1 18 Weight 2kg, 1kg, 100g, 200g, 50g, 500g Set 1 19 Weight Hanger Provided with hook, made of steel No’s 1 20 steel scale 300mm size No’s 5 21 Thickness and Length Gauge for Flakness and Elongation Index material - SS, Application Thickness & Length Gauge No’s 5 22 I.S. Sieves Set Sieves 20 cm diameter brass Aperture size 4.75 mm, 2.36 mm, 1.18mm, 600 micron, 300 micron,150 micron and 75 micron as per IS 460 No’s 2 PHE (Public Health Engineering) Lab 1 pH meter 20 x 2 line back lighted LCD display., pH Meter complies to USP and DIN standards, alphanumeric splash waterproof polyester keyboard with soft keys., Range 0° to 150° C. No’s 1 2 Turbidity meter 0 - 10,000 NTU , ± 2% of reading plus 0.01 NTU (0 to 1000 NTU)± 5% of reading (1000 to 4000 NTU) ± 10% of reading (4000 to 10,000 NTU) , Response Time: less than 6 seconds, Sample Size: 30ml, Operating Temperature: 0° - 50°C No’s 1 3 Test tube Glass Test Tube - 150 mm tall x 16 m with 14 mm inside diameter. Approximate volume is 22 mL. Borosil No’s 24 4 MAGNETIC STIRRER WITH HOT PLATE Number of stirring Positions: 1 No’s 1 Calibration: Automatic Calibration Type of Drive Motor: Motorless magnetic coil type Display Option/Output Read out Option: Digital Magnetic stirrer is: with a hot plate or some other means for heating the liquid Controller type: Electronically controlled and Programmable Speed Control Accuracy of set speed (+/-) (RPM): 0 Maximum Stirring capacity per position: 2000 milliliter Ceramic Top Plate Material, Digital Front Panel, Last run memory CE certified Product (seller to furnish supporting document to Buyer on demand) SPEED Speed Mode: Variable Speed Minimum Speed Possible (RPM): 50 Maximum Speed (RPM) of variable speed mode equipment: 1600 DIMENSIONS External Dimension: (Height )200 millimeter External Dimension: Width 200 millimeter External Dimension: Depth: 50 millimeter Body Material: Stainless Steel Finish of Body material: Powder coated Top plate Finish: Ceramic coated STIR BAR Stir bar cover material: PTFE QUOTED ALNICO MAGNET Stir Bar length: 200 millimeter TOP PLATE Top plate area shape: Circular Circular Top plate diameter: 1000 millimeter Top plate Finish: Ceramic coated 5 Burette 50 ml, made of Borosil No’s 6 6 Burette. stand with rod,clam & boss head Base 8 x 5, Rod 2411 long, 1.1tree finger clamp No’s 10 7 Conical Flask 250 ml, made of Borosil No’s 6 8 Pippette, 25 ml, made of Borosil No’s 10 9 Rubber gloves, Nitrile rubber (L Size) Box 4 10 Apron White Cloth Lab Apron (M size) No’s 5 11 Nessler Tube Borosil glass, 3.3mm thick, and 100ml capacity No’s 6 12 Glass test tubes Glass Test Tube - 150 mm tall x 16 m with 14 mm inside diameter. Approximate volume is 22 mL. made of Borosil No’s 24 13 Thermometer Digital display, accuracy +/- 1c No’s 3 14 Petri Dish Borosilicate Glass Petri Dish 90mm No’s 10 15 Silica Crucible (50m1) Heat Resistant, Strong build quality {10 piece of each). can be used in muffle furnace at high tempareture up to 1000 degree celcius No’s 10 16 Silica Crucible (100 ml) Heat Resistant, Strong build quality {10 piece of each). can be used in muffle furnace at high tempareture up to 1000 degree celcius No’s 10 17 BOD Bottle 300ml bottle , made of borosil No’s 30 18 Digital COD Digester (for 10 ml COD vials) Digestion capacity 10-16 vials Vial volume Maximum 10m1 Vial dimension 16 x 100 mm Digestion temperature 20C- 200° C No’s 1 19 Chloroscope Square unbreakable test tube - 2 Nos, glass dropper with rubber test-1No, O-Toluidine reagent-125ml, packed in thermocol box, to check chlorine in drinking water from 0.25ppm to 2ppm No’s 6 20 Porcelain dish 80mm dia, 40 ml No’s 6 21 Measuring cylinder 250 ml made of Borosil No’s 6 22 Beaker 250 ml made of Borosil No’s 6 23 Filter Paper 42 & 45 no. No’s 12 24 Funnel made of Borosil No’s 6 Geo Tech. Engg 1 I.S. Sieves 20 cm diameter brass Aperture size 4.75 mm, 2.36mm, 1.18mm, 600micron, 300 micron,150 micron and 75 micron as per IS 460 Sieves 20 cm diameter brass Aperture size 4.75 mm, 2.36 mm, 1.18mm, 600 micron, 300 micron,150 micron and 75 micron as per IS 460 Set 2 2 Pycnometer As per IS:2386 ( Part 3 ) Consist of a 1 kg Glass Jar with Brass Cone No’s 6 3 Liquid Limit Device Casagrande grooving tools and gauge block with AC Supply Compliance with IS:2720 (Part 5), IS:9259 No’s 6 Consists of a hard rubber base Casagrande Grooving Tool Gauge Block 4 Plastic Limit Set Glass plate, Flexible Spatula, Brass / SS rod, Moisture Dish & Porcelain Dish. No’s 6 5 Core Cutter As per IS:2720 (Part 29), Min. 100 mm dia x 130 mm long, Steel Dolly 25 mm high and 100 mm dia,Rammer with Steel Rod. No’s 4 6 Density bottle 100 ml, made of borosilicate No’s 5 7 Density bottle 50 ml, made of borosilicate No’s 5 8 Proctor Test Apparatus for heavy compaction Proctor Test Apparatus for heavy compaction, Material - Mild Steel as per the IS:2720 (Part 8), Rammer and Base Plate, made of Mild steel No’s 1 150 mm dia, 127.3 mm height 2,250 ml volume. Rammer:- 4.9 kg 9 Direct shear apparutus . moterised with 12 speed . As per IS : 2720 ( part XIII ) Ref. Standards IS :11229, 2720 (Part 13) No’s 1 Type of Shear : Direct / Residual Measurement Operation : Motorised Rates of Strain (mm/min) : 1.25, 0.625, 0.25, 0.125, 0.05, 0.025, 0.01, 0.005, 0.002, 0.001, 0.0004, 0.0002 Specimen Size : 60 x 60 x 25 mm Digital Indicator, Load Cell 2KN, Displacement Sensor Range : 0-20mm. Shear Box Assembly, This assembly comprises of : Halves of the Shear Box 2 Nos. Plane Gripper Plate - 2 Perforated Gripper Plate - 2 Porous Stone - 2 Top Loading Pad - 1 Base Plate - 1 Specimen Cutter - 1 Min normal stress - 3 kg/cm2 Operation : Motorised 10 Laboratory Vane Shear Apparatus As per the IS:2720 (Part 30) with special motor, Rotation 0.10/sec. No’s 1 Rate of rotation : 1/60 rpm Suitable for operation on 220 V, 50 Hz, Single Phase, AC supply. Container 1 No.Set of 4 Springs, (one each of capacity 2 kg-cm, 4 kg-cm, 6 kg-cm and 8 kg-cm min) 11 Sieve Shaker Sieve Shaker, Motorized, with Built-in Digital Timer, • A digital timer adjustable from 0-99 minutes is incorporated as an integral part of the equipment. No’s 1 • The Sieve Shaker can carry up to 8 sieves of 20cm diameter, also supplied with 30cm adaptor. It is driven by a ¼ HP geared motor. , • The Sieve Table is inclined from the vertical axis and the direction of inclination changes progressively in the clockwise direction. In addition to the gyratory motion of the table, there is a tapping motion as well. Suitable for operation on 220 V, 50 Hz, Single Phase, AC supply. 12 Electronic Balance Upto 500g, and 5 kg No’s 1 13 Glass measuring cylinder 1000 ml No’s 5 14 Stop Watch Accuracy : 0.01 Seconds No’s 2 15 Hydrometer Apparatus Hydrometer, Range: 0-20, 20-40, 40-60, 60-80, & 80-100 No’s 5 16 Metre scale 300 mm length, steel made No’s 2 17 Shrinkage Limit Set As per IS : 2720 (Part 6), Porcelain Evaporating Dish, Shrinkage Bath, Glass Cup, Min. Three Metal Prongs, Perspex Plain Plate Spatula, Glass Cylinder, 25 ml x 0.5 ml, Mercury. No’s 2 18 Sample Extractor application - soil Extractor, Capacity - 5 Ton, Automation Grade Manual No’s 1 19 Sand bath Device with tray, stove, palet, knife, steel top with powder coated, 230V, single phase No’s 1 20 Non Corridible air tight container or can 100 ml, 200 ml, 500 ml, 1000 mlSet of 6 for each Nos 24 21 Thermometer 0.5c - 60c No’s 2 22 Water bath 15 Litre capacity, temperature controlled, LED water bath No’s 1 MOM Lab. 1 Beam deflection Apparatus structural lab A mild steel beam 2.5 cm x 3 mm in cross section and 100 cm long is pinned to two supports 70 cm apart situated symmetrically. One of the ends can be fixed or given a known slope by applying a known moment at the end with the help of suspended loads. At the other end also a known moment can be applied at various points along the span of the beam. No’s 1 2 Abrasion Testing Machine for Glezed Tile voltage 230, Power 100 Watt, 50 Hz, single Phase AC Supply No’s 1 3 Flexure Strength Testing Machine Flexure Testing Machine Electrically Operated, Material of Construction: No’s 1 Weight of the Load Frame: Min. 130kg Hydraulic System: With Min. 15 liters, hydraulic oil feed and fuel pump separately, 0.5 hp, 1 Ph, 220V AC motor driven two-speed hydraulic pump.Standard confirm to:- Conforms to IS 516 and IS : 14858, Machines conforming to ASTM C39.

Tender Notice

46506544

Department Of Science And Technology

Indian

Bhagalpur

Bihar

December 16, 2024

Key Value

Ref. Documents

Ref. Documents

Ref. Documents

To Download Tender Document Click on the below link

Supply Of Machines And Equipment For Civil Engineering Lab--1 Direct reading transit theodolite 2 with tripod 2 Dumpy level with tripod 3 Prismatic compass with tripod 4 Cross Staff 5 Optical Square 6 Ranging Rod (Steel) 4m 7 Ranging Rod (Steel) 3m 8 Leveling Staff (4m) 9 Leveling Staff (5m) 10 Leveling Staff (6m) 11 Engineers Measuring Chain 30m 12 Metallic Tape 30m, 13 Arrows (Metal) 14 Mallet and pegs (wooden) 15 Spirit Level 16 Invar Tape 30m 17 Surveyor compass 18 Stand 19 Chain 20 Metallic Tape 10m, 21 Pegs 22 Hammer 23 Plane Table and its accessories 24 Metallic Tape 5m, 25 Prism Square 26 Clinometer 27 Tachometer -1 Compaction Factor Apparatus Material of Construction: Special quality low carbon mild steel. 2 Paint quality:-Powder coating 70-80 micron thick for determination of workability determination of concrete mixes of very low workability such as those normally used with concrete, compacted by vibration. Concrete mix having maximum size of aggregate not exceeding 38 mm, can be tested for workability. Compaction Factor Apparatus is complete with hoppers and receiver assembly, Tamping Rod of 16 mm dia x 60 cm long having a Hooper and two trowels. As per IS- 1199, 5515 & BS 1881-103 No’s 2 Slump Test Apparatus Slump Test Apparatus with testing rod and base plate, consisting of Slump Cone, Base plate (200mm and height 300mm) with swivel handle, Tamping rod steel, 16 mm dia x 600 mm length as per ISI 7320 No’s 4 3 Vee bee Consisto meter Material of Construction:Special quality low carbon mild steel with good paint quality Vibrator Table : Min 380*260. Four rubber shock absorbers with A.C. supply motor 415 volts, 3 phase, One metal pot, One slump cone, One swivel arm with metal cone, One graduated rod, One perspex disc. One tamping rod as per IS 1199 No’s 2 4 Cement Mortar Moulds Cement Mortar Mould, Steel, for 70.6mm cube with ISI certification mark, IS:10086, machined with a permissible variation of 0.15mm and finished within tolerances of +0.15mm - 0.10mm No’s 10 5 Cylindrical Moulds Cast Iron, Split Lengthwise 150mm dia x 300mm high with baseplate and top plate No’s 5 6 Cube Moulds Cast Iron, for 150mm Cube with ISI Certification IS:10086 No’s 10 Angle between adjacent interior faces and between interior faces and top and bottom plates of mould-90+/-0.5Deg length of base plate -Min. 280mm Width of base plate -Min. 215mm Machined flat to +/- 0.02 mm of accuracy and finished to within +/- 0.2 mm of specified dimensions. Approx wt minium to14kg 7 Le Chatelier Flask Le-Chatelier Flask, determination of specific gravity of hydraulic cement as specified in IS:4031-1968. Nos 5 8 Le-Chatelier Apparatus Le-Chatelier Mould with IS 269, 712 6392 Part-IX. This unit comprises of a metal sleeve with a hook and set of screw to fit over one of the mould pointers and a clamp to fit on to the other pointer of the mould. Nos 5 9 Standard Vicat’s Apparatus Vicat Apparatus with ISI Certification Mark, IS:5513. Nos 5 10 Needle Vibrator Immersion Type Needle Vibrator, Electrically Operated, Motor-Single Phase 2HP, Needle Dia-40mm Length (including Needle) 4-5 Mtrs. No’s 1 11 Digital Weighing Balance Electronic Balance, Capacity Min: 20kg ± 2g No’s 1 12 Digital Platform Balance Electronic Balance, Capacity Min: 100kg ± 10g No’s 1 13 Trowel made of iron, standard size No’s 10 14 spatulla 100mm, 150mm, 200mm blade of iron No’s 10 15 guinia made of iron, 200mmx 100mm metallic No’s 10 16 spirit level digital, made of brass No’s 10 17 Floor Tile testing machine (Flexure and abrasion) with all accessroies Size: 280×150×100mm: Voltage 220 V: Displacement measurement error ≤0.01mm, Temperature record value error: ±1% No’s 1 18 Weight 2kg, 1kg, 100g, 200g, 50g, 500g Set 1 19 Weight Hanger Provided with hook, made of steel No’s 1 20 steel scale 300mm size No’s 5 21 Thickness and Length Gauge for Flakness and Elongation Index material - SS, Application Thickness & Length Gauge No’s 5 22 I.S. Sieves Set Sieves 20 cm diameter brass Aperture size 4.75 mm, 2.36 mm, 1.18mm, 600 micron, 300 micron,150 micron and 75 micron as per IS 460 No’s 2 PHE (Public Health Engineering) Lab 1 pH meter 20 x 2 line back lighted LCD display., pH Meter complies to USP and DIN standards, alphanumeric splash waterproof polyester keyboard with soft keys., Range 0° to 150° C. No’s 1 2 Turbidity meter 0 - 10,000 NTU , ± 2% of reading plus 0.01 NTU (0 to 1000 NTU)± 5% of reading (1000 to 4000 NTU) ± 10% of reading (4000 to 10,000 NTU) , Response Time: less than 6 seconds, Sample Size: 30ml, Operating Temperature: 0° - 50°C No’s 1 3 Test tube Glass Test Tube - 150 mm tall x 16 m with 14 mm inside diameter. Approximate volume is 22 mL. Borosil No’s 24 4 MAGNETIC STIRRER WITH HOT PLATE Number of stirring Positions: 1 No’s 1 Calibration: Automatic Calibration Type of Drive Motor: Motorless magnetic coil type Display Option/Output Read out Option: Digital Magnetic stirrer is: with a hot plate or some other means for heating the liquid Controller type: Electronically controlled and Programmable Speed Control Accuracy of set speed (+/-) (RPM): 0 Maximum Stirring capacity per position: 2000 milliliter Ceramic Top Plate Material, Digital Front Panel, Last run memory CE certified Product (seller to furnish supporting document to Buyer on demand) SPEED Speed Mode: Variable Speed Minimum Speed Possible (RPM): 50 Maximum Speed (RPM) of variable speed mode equipment: 1600 DIMENSIONS External Dimension: (Height )200 millimeter External Dimension: Width 200 millimeter External Dimension: Depth: 50 millimeter Body Material: Stainless Steel Finish of Body material: Powder coated Top plate Finish: Ceramic coated STIR BAR Stir bar cover material: PTFE QUOTED ALNICO MAGNET Stir Bar length: 200 millimeter TOP PLATE Top plate area shape: Circular Circular Top plate diameter: 1000 millimeter Top plate Finish: Ceramic coated 5 Burette 50 ml, made of Borosil No’s 6 6 Burette. stand with rod,clam & boss head Base 8 x 5, Rod 2411 long, 1.1tree finger clamp No’s 10 7 Conical Flask 250 ml, made of Borosil No’s 6 8 Pippette, 25 ml, made of Borosil No’s 10 9 Rubber gloves, Nitrile rubber (L Size) Box 4 10 Apron White Cloth Lab Apron (M size) No’s 5 11 Nessler Tube Borosil glass, 3.3mm thick, and 100ml capacity No’s 6 12 Glass test tubes Glass Test Tube - 150 mm tall x 16 m with 14 mm inside diameter. Approximate volume is 22 mL. made of Borosil No’s 24 13 Thermometer Digital display, accuracy +/- 1c No’s 3 14 Petri Dish Borosilicate Glass Petri Dish 90mm No’s 10 15 Silica Crucible (50m1) Heat Resistant, Strong build quality {10 piece of each). can be used in muffle furnace at high tempareture up to 1000 degree celcius No’s 10 16 Silica Crucible (100 ml) Heat Resistant, Strong build quality {10 piece of each). can be used in muffle furnace at high tempareture up to 1000 degree celcius No’s 10 17 BOD Bottle 300ml bottle , made of borosil No’s 30 18 Digital COD Digester (for 10 ml COD vials) Digestion capacity 10-16 vials Vial volume Maximum 10m1 Vial dimension 16 x 100 mm Digestion temperature 20C- 200° C No’s 1 19 Chloroscope Square unbreakable test tube - 2 Nos, glass dropper with rubber test-1No, O-Toluidine reagent-125ml, packed in thermocol box, to check chlorine in drinking water from 0.25ppm to 2ppm No’s 6 20 Porcelain dish 80mm dia, 40 ml No’s 6 21 Measuring cylinder 250 ml made of Borosil No’s 6 22 Beaker 250 ml made of Borosil No’s 6 23 Filter Paper 42 & 45 no. No’s 12 24 Funnel made of Borosil No’s 6 Geo Tech. Engg 1 I.S. Sieves 20 cm diameter brass Aperture size 4.75 mm, 2.36mm, 1.18mm, 600micron, 300 micron,150 micron and 75 micron as per IS 460 Sieves 20 cm diameter brass Aperture size 4.75 mm, 2.36 mm, 1.18mm, 600 micron, 300 micron,150 micron and 75 micron as per IS 460 Set 2 2 Pycnometer As per IS:2386 ( Part 3 ) Consist of a 1 kg Glass Jar with Brass Cone No’s 6 3 Liquid Limit Device Casagrande grooving tools and gauge block with AC Supply Compliance with IS:2720 (Part 5), IS:9259 No’s 6 Consists of a hard rubber base Casagrande Grooving Tool Gauge Block 4 Plastic Limit Set Glass plate, Flexible Spatula, Brass / SS rod, Moisture Dish & Porcelain Dish. No’s 6 5 Core Cutter As per IS:2720 (Part 29), Min. 100 mm dia x 130 mm long, Steel Dolly 25 mm high and 100 mm dia,Rammer with Steel Rod. No’s 4 6 Density bottle 100 ml, made of borosilicate No’s 5 7 Density bottle 50 ml, made of borosilicate No’s 5 8 Proctor Test Apparatus for heavy compaction Proctor Test Apparatus for heavy compaction, Material - Mild Steel as per the IS:2720 (Part 8), Rammer and Base Plate, made of Mild steel No’s 1 150 mm dia, 127.3 mm height 2,250 ml volume. Rammer:- 4.9 kg 9 Direct shear apparutus . moterised with 12 speed . As per IS : 2720 ( part XIII ) Ref. Standards IS :11229, 2720 (Part 13) No’s 1 Type of Shear : Direct / Residual Measurement Operation : Motorised Rates of Strain (mm/min) : 1.25, 0.625, 0.25, 0.125, 0.05, 0.025, 0.01, 0.005, 0.002, 0.001, 0.0004, 0.0002 Specimen Size : 60 x 60 x 25 mm Digital Indicator, Load Cell 2KN, Displacement Sensor Range : 0-20mm. Shear Box Assembly, This assembly comprises of : Halves of the Shear Box 2 Nos. Plane Gripper Plate - 2 Perforated Gripper Plate - 2 Porous Stone - 2 Top Loading Pad - 1 Base Plate - 1 Specimen Cutter - 1 Min normal stress - 3 kg/cm2 Operation : Motorised 10 Laboratory Vane Shear Apparatus As per the IS:2720 (Part 30) with special motor, Rotation 0.10/sec. No’s 1 Rate of rotation : 1/60 rpm Suitable for operation on 220 V, 50 Hz, Single Phase, AC supply. Container 1 No.Set of 4 Springs, (one each of capacity 2 kg-cm, 4 kg-cm, 6 kg-cm and 8 kg-cm min) 11 Sieve Shaker Sieve Shaker, Motorized, with Built-in Digital Timer, • A digital timer adjustable from 0-99 minutes is incorporated as an integral part of the equipment. No’s 1 • The Sieve Shaker can carry up to 8 sieves of 20cm diameter, also supplied with 30cm adaptor. It is driven by a ¼ HP geared motor. , • The Sieve Table is inclined from the vertical axis and the direction of inclination changes progressively in the clockwise direction. In addition to the gyratory motion of the table, there is a tapping motion as well. Suitable for operation on 220 V, 50 Hz, Single Phase, AC supply. 12 Electronic Balance Upto 500g, and 5 kg No’s 1 13 Glass measuring cylinder 1000 ml No’s 5 14 Stop Watch Accuracy : 0.01 Seconds No’s 2 15 Hydrometer Apparatus Hydrometer, Range: 0-20, 20-40, 40-60, 60-80, & 80-100 No’s 5 16 Metre scale 300 mm length, steel made No’s 2 17 Shrinkage Limit Set As per IS : 2720 (Part 6), Porcelain Evaporating Dish, Shrinkage Bath, Glass Cup, Min. Three Metal Prongs, Perspex Plain Plate Spatula, Glass Cylinder, 25 ml x 0.5 ml, Mercury. No’s 2 18 Sample Extractor application - soil Extractor, Capacity - 5 Ton, Automation Grade Manual No’s 1 19 Sand bath Device with tray, stove, palet, knife, steel top with powder coated, 230V, single phase No’s 1 20 Non Corridible air tight container or can 100 ml, 200 ml, 500 ml, 1000 mlSet of 6 for each Nos 24 21 Thermometer 0.5c - 60c No’s 2 22 Water bath 15 Litre capacity, temperature controlled, LED water bath No’s 1 MOM Lab. 1 Beam deflection Apparatus structural lab A mild steel beam 2.5 cm x 3 mm in cross section and 100 cm long is pinned to two supports 70 cm apart situated symmetrically. One of the ends can be fixed or given a known slope by applying a known moment at the end with the help of suspended loads. At the other end also a known moment can be applied at various points along the span of the beam. No’s 1 2 Abrasion Testing Machine for Glezed Tile voltage 230, Power 100 Watt, 50 Hz, single Phase AC Supply No’s 1 3 Flexure Strength Testing Machine Flexure Testing Machine Electrically Operated, Material of Construction: No’s 1 Weight of the Load Frame: Min. 130kg Hydraulic System: With Min. 15 liters, hydraulic oil feed and fuel pump separately, 0.5 hp, 1 Ph, 220V AC motor driven two-speed hydraulic pump.Standard confirm to:- Conforms to IS 516 and IS : 14858, Machines conforming to ASTM C39.