sensor Tenders in Bihar

1
Military Engineer Services - Bihar

45089669 tender for provision of sainik institute at mil stn gaya; 2 schedule a part i (building work)lump sum price worked out by the contractor for building work as listed in schedule a part i against the lump sum price inserted by the mes. 3 sch a part ii (internal water supply)lump sum price worked out by the contractor for internal water supply) as listed in schedule a part ii against the lump sum price inserted by the mes. 4 sch a part iii(internal electric supply)lump sum price worked out by the contractor for internal electric supply as listed in schedule a part iii against the lump sum price inserted by the mes. 5 sch a part iv(external water supply)lump sum price worked out by the contractor for external water supply as listed in schedule a part iv against the lump sum price inserted by the mes. 6 sch a part v(external electrific supply)lump sum price worked out by the contractor forexternal electrific supply as listed in schedule a part v against the lump sum price inserted by the mes. 7 sch a part vi(road, path and culvert)lump sum price worked out by the contractor for road path and hard standing as listed in schedule a part vi against the lump sum price inserted by the mes. 8 sch a part vii(sewage disposal)lump sum price worked out by the contractor for sewage disposal as listed in schedule a part vii against the lump sum price inserted by the mes. 9 sch a part viii (area drainage)lump sum price worked out by the contractor for area drainage as listed in schedule a part viii against the lump sum price inserted by the mes. 10 sch a part ix(site clearance, excavation & earth works)lump sum price worked out by the contractor for site clearance, excavation & earth works as listed in schedule a part ix against the lump sum priceinserted by the mes. 11 note for srl no 2 to 10the percentage above / below the ssr 2020 (part ii) rates shall be derived from the amount quoted by the contractor against srl no. 2 to 11by comparing it with the amount inserted / pre priced by the department and the same shall be applicable for the items of respective schedule 12 schedule a part x (miscellaneous works) 13 item no 01 : supply, install, commissioning and testing of split type wall mounted air conditioner of capacity 1.5 tr (4500 k cal/hr) single phase, (non cfc/hchc) suitable for 230 volt +10%, 50 hz, ac supply complete with cordless remote control unit, minimum bee 3 star rating, eer of 5.02 and above complete all as specified and directed. 14 item no 02 : supply and fixing voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 v to 250 v with output voltage stabilized at 230 v with accuracy of ± 2.5% and of capacity 4 kva complete all as specified and directed. 15 item no 03 : supply and fix water cooler electric driven (single phase), having approx storage capacity of 80 litre and nominal cooling capacity of 40 litres per hour complete all as specified and directed. 16 sewage disposal 17 item no 04 : m&l for dwc hdpe pipes class sn 8 laid in trenches of 150 mm internal diameter of pipe and jointed as specified complete all as specified and directed. 18 item no 05 : m&l for dwc hdpe pipes class sn 8 laid in trenches of 100 mm internal diameter of pipe and jointed as specified complete all as specified and directed. 19 arboriculture 20 item no 06 : material & labour for continuous brick on deging with width equal to the depth of the brick laid dry on end at the required angle with modular bricks sub class b bricks complete all as specified and directed. note: the rate quoted by the tenderer for this item shall be inclusive of embedding bricks in the ground upto the required depth and tempering the ground around bricks and removing surplus soil to a distance not exceeding 100 m complete all as specified and directed. 21 item no 07 : supply & plant ashoka plant of height 7 complete all as specified and directed. 22 item no 08 : supply & plant cycas leaf palm of height 4 of height 7 complete all as specified and directed. 23 item no 09 : supply & plant sampen palm of height 5 of height 7 complete all as specified and directed. 24 item no 10 : supply & plant triangular palm of height 7 complete all as specified and directed. 25 item no 11 : supply & plant triangular plant of height 7 complete all as specified and directed. 26 item no 12 : supply & plant bottle palm of height 7 complete all as specified and directed. 27 item no 13 : supply & plant china palm of height 1 complete all as specified and directed. 28 item no 14 : supply & plant pichutia palm of height 4 complete all as specified and directed. 29 item no 15 : supply & plant red palm of height 6 complete all as specified and directed. 30 item no 16 : supply & plant areca palm of height 7 complete all as specified and directed. 31 item no 17 : supply & plant ficus palm of height 4 5 complete all as specified and directed. 32 item no 18 : supply & plant golden cypress plant of height 5 complete all as specified and directed. 33 item no 19 : supply & plant silver star plant of height 1 2 complete all as specified and directed. 34 item no 20 : supply & plant coconut plant of height 7 complete all as specified and directed. 35 item no 21 : supply & plant euforbia plant of height 1 complete all as specified and directed. 36 item no 22 : supply & plant supari palm of height 7 complete all as specified and directed. 37 item no 23 : supply & plant foxtail palm of height 7 complete all as specified and directed. 38 item no 24 : supply & plant green vichia palm of height 7 complete all as specified and directed. 39 item no 25 : supply & plant cantia palm of height 7 complete all as specified and directed. 40 item no 26 : supply & plant ravenea palm of height 4 complete all as specified and directed. 41 item no 27 : supply & plant rhapis palm of height 4 complete all as specified and directed. 42 internal electrical supply 43 item no 28 :m & l for point wiring using approved colour coding as per is, with multistranded copper conductor1.5 sq. mm (nominal area), single core, pvc insulated and unsheathed frlsh cable 1100 volts gradeisi 694 marked drawn through in and including heavy duty, pvc concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty isi marked, including pvc insulated multistranded copper conductor 1.5 sqmm (nominal area) single core frlsh cable as earth continuity conductor to common earth and connecting to earth dolly includingcutting, chasses and makinggooddisturbed surface to match with existing finish with plaster complete all as specified and directed for the following : 44 (a) one light point controlled by one, one way switch 5 amps 45 (b) one fan point/ exhaust fan point controlled by one, one way switch 5 amps and regulator 46 (d) one 3 point 5 amps switch socket outlet point controlled by one switch on the same board. 47 (e)one 3 pin 5 amps switch socket outlet point controlled by one switch on independent boad. 48 item no 29 :description all as per item no 28 here in before butusing 2.5 sq mm single core copper conductor two noscables of multistranded flame retardant pvc insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of2.5 sq mm copper conductor flame retardant pvc wire as earth continuity conductor along with wiring and connecting to the common eath dolly. 49 item no 30 :description all as per item no. 28 here in before butusing 4.0 sq mm single core copper conductor two nosfrlsh cable of multistranded pvc insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of4.0 sq mm pvc insulated copper conductor frlsh cable as earth continuity conductor along with wiring and connecting to the common eath dolly. (for ac point) 50 item no 31 : s & f modular metal flush box 8 module 51 item no 32 : s & f modular metal flush box 12 module 52 item no 33 : s & f modular white cover plate with frame 12module 53 item no 34 : m & l forsub main wiring with approved colour coding as per is with two single core pvc insulated frlsh cable with stranded copper conductor of size 6 sq mm nominal area and drawing into suitable size of pvc non metallic rigid heavy duty pvc conduit of white/ ivory colour and its accessaries isi marked heavy duty of suitable sizeincluding concealed in wall etcone run of pvc insulated with 6.0 sqmm (nominal area) stranded copper conductor frlsh cable as earth wire complete all as specified and as directed. note: two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of pvc conduit will be measured as one unit 54 item no 35 : s & f for sheet metal enclosure mcbdbtpn4 way verticaltype with 200 amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the dbs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. 55 item no 36 : s & f for sheet metal enclosure mcbdbspn8 way with 200 amps rated bus bar 240 volts double door including blanking plate for dummy space with magnitic locking system including necessary provision for inserting the dbs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specifiedand as directed. 56 item no 37 : s & fformcb four polerated capacity 63 amps, 415 volts breaking capacity 10 ka, c curve complete all as specified and as directed. 57 item no 38 : s & f for mcb dp rated capacity 32amps, 240 volts breaking capacity 10 ka, c curve complete all as specified and as directed. 58 item no 39 : s & ffor mcb single pole rated capacity 6 32 amps, 240 volts breaking capacity 10 ka, c curve complete all as specified and as directed. ( 6a 15 nos, 10a 05 nos, 16a 10nos, 32a 08 nos) 59 item no 40 : s & ffor metal clad box suitable for 230 volt 50 hz ac supply with threee pin power socket & plug top 15 amp including mcb sp 25 ampcomplete all as specified and as directed complete all as specified and as directed 60 item no 41 : supply and fixing ceiling fans complete with blades, down rods, electronic regulator modular type and accessories, 230 v, 1200 mm sweep. min air delivery 210 cfm with service value 6.0 bee. five star rated with brushless direct current motor (bldc) complete all as specified and as directed. 61 item no 42 : s & f forled 10 watts batten aluminium extruded with decorative end caps with luminous efficacy not less than 120 lumen/watt complete all as specified and as directed. 62 item no 43 : s & f led luminaire surface/recess mounted type 36 watt, approx size of600mm x 600mm, 230 voltswith crca housing with and intregrated electronic driverconnector block with luminous efficacy not less than 120 lumen/watt etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired andnecessary mounting arrangements, provision of new 3 core multistrandedcopper conductor with flexible conduit of 0.75 sqm sizecomplete all as specified and as directed. 63 item no 44 : s & f for wall mounted led tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput with luminous efficacy not less than 120 lumen/wattboxtype fitting, 230 volts and intregrated electronic driverconnector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired andnecessary mounting arrangements, provision of new 3 core multistrandedcopper conductor and flexible conduit of size 0.75 sqm from ceiling rose to fitting complete all as specified and as directed. 64 item no 45 : s & f for energy saving new generation environmental friendly long life versatile presure die cast aluminium ip 66 for security light fitting luminaire with high power leds as light source and electronic driver of capacity 35 wattswith luminous efficacy not less than 110 lumen/wattwith pre wired andnecessary mounting arrangements and provision of 0.75 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia gi pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by engineer in charge. 65 item no 46 : s & f for energy efficient exhaust fan of 300 mm sweep made of metal body ventil air ds type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of pvc flexible copper cable of size 0.75 sqmm three core from ceiling rose to exhaust fan forconnection and making suitable size ofhole to existing brick wall for fan basecompelte all as specifiedand directed. 66 item no 47 : s& f occupancy sensor suspended type to detect the presence of a person for include automatic adjustment of lights systems in response to the quantity of people present for switch off/on the light in a circuit as per user reqmt ( for use at parking area, verandah or any other space where power saving srequired) 67 external electrical supply 68 item no 48 : supply, fabrication, installation and testing of lt panel out door type factory made cpri approved, water and vermin proof protection of size 1000mm x 1000mm x 500 mm (over all dimension) made out of 3.00 mm thick crca sheet dully supported with mild steel angle iron of size 50 x 50 x 6 mm vertical frame and legs with mild steel flat iron 25 x 5 mm in horizontal sides of the frame with front and back side openable, single hinged door / shutter with locking arrengement and powder coated finish both internal and external steel surfaces after necessary preparation of steel surfaces including providing pcc (1:3:6) type c2 foundation of suitable size and connections of all outgoing / incomming cable inclusive of necessary excavation and earthwork as required including the following fitment accessories complete all as specified and directed. 69 incomming(a) copper strip busbar of 100 amps rated capacity wrapped with pvc sleeves with maintained the colour code and provision of making holes with copper nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends 04 nos (b) tpn mcb 40 amps 01 no. (c) on load change over switch tpn of capacity 63 amps 01 no (d) led neon indicator lamp (ryb) with holder and fuse holder 230/250 volts, ac 01 set (set of three) (e) digital ammeter of range (0 100) amps, flush mounting type with ct’s of ratio 100/5 and selector switch 01 set. 70 outgoing(a) mcb tpn 32 amps 02 nos. (one spare) (b) mcb spn 16 amps 01 nos (street light) (c) enamelled iron danger notice plate of 1.60 mm thick mild steel sheet of size 200 mm x 150mm, white with letters, figures and conventional skull and bones in signal red and fixed with nuts and bolts on door / shutter of jb for lt 01 no. 71 item no 49 : s&f pvc junction box of size 350mm x 250mmm x 138mm outdoor type, weather proof, factory made out of pvc sheet 1.8mm thick with front side hinged opening having locking arrangement with nuts & bolts & arrangement for incoming and outgoing cable/wire complete comprising of aluminium bus bar for 3 phases & neutral, insulated with insulators, including colour coding and 01 nos mcb 06 amps complete all as specified and directed. 72 item no 50 : supply and fixing led street light fitting 70 watt 230 v ac outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with ip 65/66 protection complete all as specified and directed. 73 item no 51 : supply and fixing post top lantern led type 40 watt 230 watt volts ac outdoor type with decorative post top for 360 degree indirect light ip 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed. 74 item no 52 : supplying, install and erect in true vertical position steel tubular swaged welded pole complete with ms base plate 6 mm thick and of size 300 x 300 mm, final taper, pole cap, bolts, nuts, washers & screws etc pole made out of erw ms tubing conforming to is 2713 part ii type 410 sp 31 (9.0 metres long) including of holes of reqd nos and size for fixing of cross arms, painting with one coat of red oxide primer and two coats of aluminium paint for exposed surfaces and two coats of black bituminous paint for portion embedded in concrete, painting with synthetic enamel paint (first grade/quality) black & yellow colour at lower portion of exposed pole starting from plinth block band of 1200 mm height (4 nos each strip of 150 mm width) complete all as specified and directed. note: earthwork, cement concrete, cross arms etc. will be measured and paid under approprite items. 75 item no 53 : m & l for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to gi earth strip 32x6mm by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, pcc chamber, ci frame and cover, ms funnel with wire mesh all as shown in electrical plate no 3 of ssr part i including excavation and earthwork in any type of soil/strata and testing on completion. note: gi earth strip 32x6 mm and 40 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted. 76 item no 54 : m & l for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to gi wire 4mm by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, pcc chamber, ci frame and cover, ms funnel with wire mesh all as shown in electrical plate no 3 of ssr part i including excavation and earthwork in any type of soil/strata and testing on completion. note: gi iron strip 4 mm and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted. 77 furniture 78 item no 35 : chair easy fd 229 79 item no 36 : chair tublar steel with armsfd 75(m) 80 item no 37 : chair tublar steel without armsfd 75(m) 81 item no 38 : chair verandahfd/map/ ii/06 82 item no 39 : durrie 18x15tp 83 item no 40 : form with back steel fd 78(m) 84 item no 41 : ladder aluminiumfd 1025 85 item no 42 : receptacle pvcfd/e6/map/13 86 item no 43 : stool steel fd 81(m) 87 item no 44 : table 90x60 cm with drawer fd 283 88 item no 45 : table 90x60 cm without drawer fd 284 89 item no 46 : table 90x90 cm marble top fd 300 90 item no 47 : table office clerk steel fd 1004 91 item no 48 : table 90x90 cm steel fd 1009 92 item no 49 : table steel for serving fd 1011 93 item no 50 : teapoy fd 278 94 item no 51 : teapoy verandahfd/e6/map/17 ...

Due Date : September 26, 2024

Tender Value : ₹ 1.17 Crore

View Tender
2
Military Engineer Services - Bihar

45068519 tender for widening of roads at af station bihta; 1 surface excavationnot exceeding 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil complete all as specified and asdirected. 2 excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 deep andgetting out in hard/dense soil complete all as specified andas directed. 3 rolling and consolidatingformation surfaces in cutting with power rollar exc 8 tonne and not exc 12 tonne complete all as specified and as directed. 4 m&l for laying and compacting 150 mm thick (compacted thickness) granular sub base course(gsb) grading as per grade ii as per table 900 1 ofmorth specificationfor road and bridge works 2013, in a single layer over compacted sub gradewith natural sand, crushed gravel, crushed stone , crushed slag or combination thereofas per the gradingrequired .the materials are mechanically mixed, spread and levelling on the subgrade by using motor grader of adequate capacity and rolling with vibratory rollar of capacity 80 100knstatic weight for achievingrequired compacted density of atleast 98% of the maximum dry density. consolidating torequired gradient and camber with finished surfaces, tolerances as per morth specification table 900 1 for road and bridge work 2013 complete all specifiered and as directed. 5 m&l for laying and compacting 150 mm thick (compacted thickness) wet mix macadam (wmm) laid in two layers if 75 mm each, grading as per 400 13 of morth specification for road and bridge works 2013, manufactured in wmm plant, material comprising of clean,crushed,graded aggregateand granular material premixed with water to a dense mass. spreadingwith sensor paver and rolling with vibratory roller of capacity 80 100 kn static weightandconsolidating torequired gradient and camber with finished surfaces, tolerances as per morth specification table 900 1 for road and bridge work 2013 complete all specifiered and as directed. 6 m&lformoorum/red bajri filling in layers not exceeding 15 cm thick, spread, rolled , compected and consolidated to gradient and cambe as in berms of road complete all as specified and as directed. 7 m&l for preparing wet mix macadam (wmm) surface by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming/ tack coat with bituminous primer with paving bitumen vg 10 @ 10 kg per ten square metrecomplete all as specified and as directed. 8 m&l 50 mm consolidated thickness premix bituminous macadamusing binder paving bitumen grade vg 30 at the rate of 4% of total mix weight by using hot mix plant for mixing andmechanical paver for laid/rolled and compactedwith 8 to 10 tonne power roller to required gradient and camber complete all as specified and as directed.note: (i) work shall be executed as perapproved design mix from nablgovt approved lab /govt engg college as decided by ge.(ii) any variation in binder content during design mix at site on plus side shall be borne by the contractor without any extra cost to the government. 9 preparing of existingold black top surface by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etcand applyingevenly a tack coatwith bituminous primer using paving bitumen of grade vg 10@ 5 kg per ten square metrecomplete all as specified and as directed 10 m&l providing bituminous premixsemi denseasphaltic concrete 30 mmconsolidated thickness with minimum5.5 % binder contentby weight of total mix, using paving bitumen vg 30using hot mix plant and laidby using mechanical paver, rolled and compacted with 8 to 10 tonne power roller to required camber and gradient complete all as specified and as directed.note : (i)work shall be executed as perapproved design mix from nablgovt approved lab /govt engg college as decided by ge.(ii) any variation in binder content during design mix at site on plus side shall be borne by the contractor without any extra cost to the government. 11 m & l for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like on roads pavements with hot applied thermo plastic road marking paint of approved colour confirmingto bs 3262 1989 with special applicator machine all as per manufacturers instruction complete all as specified and as directed.note: (i)road marking work shall be carried out in accordance with manufactures instructions and as specified.(ii)refermorth specification ofpara803.4.2.1 and 800.4.2.2 on bituminous surface in white colour or yellow colour and super imposed with glass beads confirming to bs 6088 and morth specificationpara 803.4.3.3 . 12 s&f road studs of abs material of size 100mmx100mmx20 mm with two side acrylic plastic reflectors complete all as per manufacturers instruction complete all as specified and as directed.make: gogiya plastic cat part no gp 733 a/3m/dark eye as approved 13 m&l for continuous brick edging with width equal to the width of bricks, laid dry on end vertically with burnt claybricksof sub class b complete all as specified and as directed. 14 removing excavated material (soils)not exceeding 50 m and depositig where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed. ...

Due Date : September 28, 2024

Tender Value : ₹ 43 Lakhs

View Tender
3
District Planning & Monitoring Unit - Bihar

45057993 tender for supply of materials for establishment of atal tinkering labs, arduino und or compatible microprocessor and microcontroller breadboards & mini breadboard general purpose solderable board 16x2 lcd display with 120 usb cables, usb cables 9 volt battery resistor kit capacitor kit linear voltage regulator water pump module 8*8 led matrix module bluetooth (hc 05) 7 segment led display alligator connectors battery clips with dc jack hookup wires, jumper cable rgb leds leds (red) leds (yellow) leds (white) timer ic lm 555 capacitive touch module mpr121 capacitive touch switch ir sensors, obstacle avolder sensor triple axis magnetometer...

Due Date : September 18, 2024

Tender Value : ₹ Ref. Documents

View Tender
4
East Central Railway - Bihar

45046043 supply of speed sensor pg complete medha pt no t813 m for mrt922. pl no 25208690speed sensor pg complete medha pt no t813 m for mrt922. pl no 25208690,speed sensor pg complete medha pt no t813 m for mrt922. pl no 25208690 [ warr anty period: 30 months after the date of delivery ] ]...

Due Date : September 09, 2024

Tender Value : ₹ Ref. Documents

View Tender
5
National Thermal Power Corporation Limited - Bihar

45025399 procurement of gwr level transmitters and swas spares of rosemount procurement of gwr level transmitters and swas spares of rosemountemerson make for ntpc nabinagar , gwr spare level prb,3309nn+,rosemount , lvl probe,3309nn0s1v3am0127+,rosemount , lvl probe,3309nn0s1v3am0142+,rosemount , gwr spare level prb,3309nn+,rosemount , gwr lvl tx head assy,3301+q4u1,rosemount , lvl trnsmtr assy,rosemount,gwr,0 800mm , lvl trnsmtr assy,3301ha1s+,rosemount,gwr , lvl tx assy,3301ha1+,rosemount,gwr , transmitter assy,rosemount,3301ha1s1+ , ph sensor,396p 02 10 55,rosemount , extension cable,lad cable,emerson , turbidity xmtr,1056 03 27 38 an,emerson , turbidity snsr sg bd,24412 00,emerson , acid concent xmtr wth probe,1056,emerson...

Due Date : September 09, 2024

Tender Value : ₹ Ref. Documents

View Tender
6
Department Of Science And Technology - Bihar

45024286 supply of machines and laboratory equipments for civil engineering in the premises of government polytechnic buxar 1 slump test apparatus 2 flow table 3 cement mortar moulds cement mortar mould, steel, for 70.6 mm cube with isi certification mark, is 100086, machined with a permissible variation of 0.15 mm and finished within tolerances of ±0.15mm 0.10mm 4 cylindrical moulds cast iron, split lengthwise 150mm dia x 300 mm high with baseplate and top plate. 5 spring material test specifications 1000n (digital display) operation hand operated capacity 1000n maximum load measurement by load cell displacement by rotary encoder resolution 10000 counts for maximum load n 100n load cell, load & displacement display resolution of displacement 0.01 mm vertical day light 300mm load accuracy +/ 1% from 4% to 100% load cell capacity overall dimension in mm approx. (l x w x h) 500 x 400 x 1100mm approx.. 6 cement autoclave as per is 4031 (part 3) suitable for conducting accelerated soundness test on cement or the autoclave expansion test. stainless steel pressure vessel wit insulated outer shell pressure controlled through microprocessor based pid controller equipment with spring loaded safety valve pressure gauge, pid controller with rtd for control of heater unit. three fold safety mechanism reliable silicon rubber lid sealing gasket working pressure 21±1kg/cm at 2150c pressure vessel id 150mm x depth 500mm weight 70kg heater 2000 watts supply 220v, 50 hz, 1phase machine supplied with rubber gasket, viton 1 no pressure gauge, 0 42kg/cm temperature controller with sensor shrinkage bar mould, four compartments with smooth reference point length comparator digital. 7 floor tile testing machine (flexure and abrasion) with all accessories size 280 x 150 x 100mm voltage 220v displacement measurement error ≤0.01mm, temperature record value error ±1% 8 strain gauge indicator 0.3 mm 60mm, copper nickel alloy made name of lab: environmental engineering 1 turbidity meter 0 1000 ntu, ±2% of reading plus 0.01 ntu (0 to 1000 ntu) ±5% of reading (1000 to 4000 ntu) response time less than 6 seconds, sample size, 30ml, operating temperature 00 500c ...

Due Date : September 23, 2024

Tender Value : ₹ Ref. Documents

View Tender
7
East Central Railway - Bihar

45018658 auction sale of scrap aluminium item [1] junction box with fittings [speed sensor and dump valve], qty 1.306 mt, location rncc depot...

Due Date : September 09, 2024

Tender Value : ₹ Ref. Documents

View Tender
8
East Central Railway - Bihar

45018657 auction sale of scrap stainless steel items [1] released seat of 2nd ac char car lhb coaches (03 seater 14 nos.) qty 42 nos. [2] released seat of 2nd ac chair car lhb coaches (02 seater, 18 nos.), qty 36 nos. [3] junction box with fitting [speed sensor and dump valve], qty 60 nos. location rncc depot...

Due Date : September 09, 2024

Tender Value : ₹ Ref. Documents

View Tender
9
East Central Railway - Bihar

44996832 supply of speed sensor g16, make knnor bremse ii35456/20013speed sensor g16, make knnor bremse ii35456/20013,speed sensor g16, make knnor bremse ii35456/20013 [ warranty period: 36 months after t he date of delivery ] [quantity tolerance (+/ ): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]...

Due Date : September 09, 2024

Tender Value : ₹ Ref. Documents

View Tender
10
Eastern Railways - Bihar

44978891 supply of plug, sensor turbo speed & heat shrink tubeplug, sensor turbo speed & heat shrink tube,plug cpc 23 22m (reference chart no.40027876 alt. kc) emd part no. 40019316 a nd blw pl. no. 18360221 for wdg4/wdp4 hhp locomotives (reference chart no.40027876 a lt. kc) emd part no. 40019316 and blw pl. no. 18360221 for wdg4/wdp4 hhp locomotives [ warranty period: 30 months after the date of delivery ] ] , sensor turbo speed (tpu) to emd pt no:40038643 pl no.16241332 [ warranty period: 30 months after the date of delivery ] ] , heat shrink tube to emd part no. 40048383 and blw pl.no. 18531131 for wdg4/ wdp4 hhp locomotives. [ warranty period: 30 months after the date of delivery ] ]...

Due Date : September 20, 2024

Tender Value : ₹ Ref. Documents

View Tender
11
Rail Wheel Plant - Bihar

44971636 supply of spares for bhn sensorspares for bhn sensor,spares for bhn sensor as per annexure a [ warranty period: 30 months after the date of deli very ] ] sse/elect./sub bihar 3.00 set => limited...

Due Date : September 06, 2024

Tender Value : ₹ Ref. Documents

View Tender
12
Rail Wheel Plant - Bihar

44971504 supply of 220 240volt ac auto day/night on & off photocell.220 240volt ac auto day/night on & off photocell.,220 240volt ac auto day/night on & off photocell, ldr sensor switch for lighting water proof, phot ocell sensor 10a, frequency 50hz, make: phillips, quick sense, legrand, havells, anchor [ warranty period: 12 months after the date of delivery ] ] => limited...

Due Date : September 06, 2024

Tender Value : ₹ Ref. Documents

View Tender
13
Rural Works Department - Bihar

44962012 tender for mr n/23 24/phulparas 03 1 name of road l033 to kulai tolaclearing and grubbing road land (by manual means)including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees ofgirth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i 2 construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 100 m as per technical specification. 3 construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification. 4 wbm grading iii providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smoothwheel roller 80 100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification. 5 providing and applying primer coat with bitumen emulsion (ss 1)on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 1.0 kg/sqm using mechanical means as per technical specification clause 502. 6 providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503. 7 providing and laying semi dense bituminous concrete with 100 120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 508 complete in all respects. 8 construction of un reinforcedplain cement thickness as perdesign , over a prepared sub base with 43 grade cement or any other type as per clause 1501.2.2 m 30 grade coarse and fine aggregate maximum size of aggregate not exceding 25mm , mixed in a concrete of not less than 0.2cum capacity and appropriate weigh batcher using approved mix design ,laid in approved fixed side formwork ( steel channel ,laying and fixing of 125 micron thick plythene film ,wedges ,steel plates including levelling the formwork as per drawing ) spreading the concrete with shovels , rakes , compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion , constrution joints ,applying debonding strips , primer , sealant , dowel bars , near approaches to bridge/ culvert and construction joints, admixtures as approved , curing of concrete slab for 14 days curing compound (where specified) and water finishing to lines and grade as per drawing and technical specification clause 1501. 9 km stone reinforced cement concrete m15 grade kilometre local stone of standard design asper irc:8 fixing in position including painting and printing , etc as per drawing and technical specification clause 1703. 10 200 m stone reinforced cement concrete m15 grade kilometre local stone of standard design asper irc:8 fixing in position including painting and printing , etc as per drawing and technical specification clause 1703. 11 600 mm equilateral & triangle providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as perdrawings and technical specification clause 801 12 600 mm circular providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as perdrawings and technical specification clause 801 13 600 mm x 450 mm rectangular providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as perdrawings and technical specification clause 801 14 planting of trees by the road side (avenue trees) in 0.60 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, planting the saplings, backfilling the trench, watering, fixing the tree guard and maintaining the plants for one year 15 providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads@ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per irc:35.the finished surface to be level, uniform and free from streaks and holes. (bt) 16 providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads@ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per irc:35.the finished surface to be level, uniform and free from streaks and holes. (pcc) 17 providing and fixing of typical mmgsy informatory sign board with logo as per mord specifications and drawing. three ms plates of 1.6 mm thick, top and middle plate duly welded with ms flat iron 25mm x 5m size on back on edges.the lower plate will be welded with ms angle iron frame of 25mm x 25mm x 5mm. the angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 swg sheet tubes posts duly embedded in cement concrete m 15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level.the top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 swg steel plate tube.all m.s. will be stove enameled on both sides.lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour.all sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing clause 1701 and annexure 1700.1 18 brick masonry work in cement mortar 1:3 in parapet excluding pointing and plastering as per drawing and technical specifications clauses 600, 900 and 1208.4 19 plastering with cement mortar (1:4 ) on brick work in sub structure as per technical specifications 20 painting two coats including primer coat after filling the surface with synthetic enamel paint in all shades on new, plastered / concrete surfaces as per drawing and technical specification clause 1701 21 add labour cess @ 1% 22 add gst @ 18% 23 seigniorage fee 24 1st year maintenance cost 25 2nd year maintenance cost 26 3rd year maintenance cost 27 4th year maintenance cost 28 5th year maintenance cost 29 add labour cess @ 1% 30 add gst @ 18% 31 seigniorage fee 32 name of road t02 to bariyahiclearing and grubbing road land (by manual means)including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees ofgirth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i 33 construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 100 m as per technical specification. 34 construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification. 35 construction of granular sub base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavatorat omc, and compacting with smoothwheelroller to achieve thedesired density, complete as per technical specification clause 401. grading ii 36 wbm grading iii providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smoothwheel roller 80 100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification. 37 providing and applying primer coat with bitumen emulsion (ss 1)on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 1.0 kg/sqm using mechanical means as per technical specification clause 502. 38 providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503. 39 providing and laying semi dense bituminous concrete with 100 120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 508 complete in all respects. 40 construction of un reinforcedplain cement thickness as perdesign , over a prepared sub base with 43 grade cement or any other type as per clause 1501.2.2 m 30 grade coarse and fine aggregate maximum size of aggregate not exceding 25mm , mixed in a concrete of not less than 0.2cum capacity and appropriate weigh batcher using approved mix design ,laid in approved fixed side formwork ( steel channel ,laying and fixing of 125 micron thick plythene film ,wedges ,steel plates including levelling the formwork as per drawing ) spreading the concrete with shovels , rakes , compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion , constrution joints ,applying debonding strips , primer , sealant , dowel bars , near approaches to bridge/ culvert and construction joints, admixtures as approved , curing of concrete slab for 14 days curing compound (where specified) and water finishing to lines and grade as per drawing and technical specification clause 1501. 41 5th km stone reinforced cement concrete m15 grade kilometre local stone of standard design asper irc:8 fixing in position including painting and printing , etc as per drawing and technical specification clause 1703. 42 km stone reinforced cement concrete m15 grade kilometre local stone of standard design asper irc:8 fixing in position including painting and printing , etc as per drawing and technical specification clause 1703. 43 200 m stone reinforced cement concrete m15 grade kilometre local stone of standard design asper irc:8 fixing in position including painting and printing , etc as per drawing and technical specification clause 1703. 44 600 mm equilateral & triangle providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as perdrawings and technical specification clause 801 45 600 mm circular providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as perdrawings and technical specification clause 801 46 600 mm x 450 mm rectangular providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as perdrawings and technical specification clause 801 47 planting of trees by the road side (avenue trees) in 0.60 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, planting the saplings, backfilling the trench, watering, fixing the tree guard and maintaining the plants for one year 48 providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads@ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per irc:35.the finished surface to be level, uniform and free from streaks and holes. (bt) 49 providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads@ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per irc:35.the finished surface to be level, uniform and free from streaks and holes. (pcc) 50 providing and fixing of typical mmgsy informatory sign board with logo as per mord specifications and drawing. three ms plates of 1.6 mm thick, top and middle plate duly welded with ms flat iron 25mm x 5m size on back on edges.the lower plate will be welded with ms angle iron frame of 25mm x 25mm x 5mm. the angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 swg sheet tubes posts duly embedded in cement concrete m 15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level.the top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 swg steel plate tube.all m.s. will be stove enameled on both sides.lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour.all sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing clause 1701 and annexure 1700.1 51 plastering with cement mortar (1:4 ) on brick work in sub structure as per technical specifications 52 painting two coats including primer coat after filling the surface with synthetic enamel paint in all shades on new, plastered / concrete surfaces as per drawing and technical specification clause 1701 53 add labour cess @ 1% 54 add gst @ 18% 55 seigniorage fee 56 1st year maintenance cost 57 2nd year maintenance cost 58 3rd year maintenance cost 59 4th year maintenance cost 60 5th year maintenance cost 61 add labour cess @ 1% 62 add gst @ 18% 63 seigniorage fee 64 name of road pahalwan pokhar to gatti patti ( gilal ram tola )clearing and grubbing road land (by manual means)including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees ofgirth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i 65 construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification. 66 construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification. 67 wbm grading iii providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smoothwheel roller 80 100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification. 68 providing and applying primer coat with bitumen emulsion (ss 1)on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 1.0 kg/sqm using mechanical means as per technical specification clause 502. 69 providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503. 70 providing and laying semi dense bituminous concrete with 100 120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 508 complete in all respects. 71 construction of un reinforcedplain cement thickness as perdesign , over a prepared sub base with 43 grade cement or any other type as per clause 1501.2.2 m 30 grade coarse and fine aggregate maximum size of aggregate not exceding 25mm , mixed in a concrete of not less than 0.2cum capacity and appropriate weigh batcher using approved mix design ,laid in approved fixed side formwork ( steel channel ,laying and fixing of 125 micron thick plythene film ,wedges ,steel plates including levelling the formwork as per drawing ) spreading the concrete with shovels , rakes , compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion , constrution joints ,applying debonding strips , primer , sealant , dowel bars , near approaches to bridge/ culvert and construction joints, admixtures as approved , curing of concrete slab for 14 days curing compound (where specified) and water finishing to lines and grade as per drawing and technical specification clause 1501. 72 km stone reinforced cement concrete m15 grade kilometre local stone of standard design asper irc:8 fixing in position including painting and printing , etc as per drawing and technical specification clause 1703. 73 200 m stone reinforced cement concrete m15 grade kilometre local stone of standard design asper irc:8 fixing in position including painting and printing , etc as per drawing and technical specification clause 1703. 74 600 mm equilateral & triangle providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as perdrawings and technical specification clause 801 75 600 mm circular providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as perdrawings and technical specification clause 801 76 600 mm x 450 mm rectangular providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as perdrawings and technical specification clause 801 77 planting of trees by the road side (avenue trees) in 0.60 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, planting the saplings, backfilling the trench, watering, fixing the tree guard and maintaining the plants for one year 78 providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads@ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per irc:35.the finished surface to be level, uniform and free from streaks and holes. (bt) 79 providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads@ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per irc:35.the finished surface to be level, uniform and free from streaks and holes. (pcc) 80 providing and fixing of typical mmgsy informatory sign board with logo as per mord specifications and drawing. three ms plates of 1.6 mm thick, top and middle plate duly welded with ms flat iron 25mm x 5m size on back on edges.the lower plate will be welded with ms angle iron frame of 25mm x 25mm x 5mm. the angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 swg sheet tubes posts duly embedded in cement concrete m 15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level.the top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 swg steel plate tube.all m.s. will be stove enameled on both sides.lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour.all sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing clause 1701 and annexure 1700.1 81 brick masonry work in cement mortar 1:3 in parapet excluding pointing and plastering as per drawing and technical specifications clauses 600, 900 and 1208.4 82 plastering with cement mortar (1:4 ) on brick work in sub structure as per technical specifications 83 painting two coats including primer coat after filling the surface with synthetic enamel paint in all shades on new, plastered / concrete surfaces as per drawing and technical specification clause 1701 84 add labour cess @ 1% 85 add gst @ 18% 86 seigniorage fee 87 1st year maintenance cost 88 2nd year maintenance cost 89 3rd year maintenance cost 90 4th year maintenance cost 91 5th year maintenance cost 92 add labour cess @ 1% 93 add gst @ 18% 94 seigniorage fee 95 name of road t02 to kishnipatticlearing and grubbing road land (by manual means)including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees ofgirth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i 96 construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 100 m as per technical specification. 97 construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification. 98 wbm grading iii providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smoothwheel roller 80 100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification. 99 providing and applying primer coat with bitumen emulsion (ss 1)on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 1.0 kg/sqm using mechanical means as per technical specification clause 502. 100 providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503. 101 providing and laying semi dense bituminous concrete with 100 120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 508 complete in all respects. 102 construction of un reinforcedplain cement thickness as perdesign , over a prepared sub base with 43 grade cement or any other type as per clause 1501.2.2 m 30 grade coarse and fine aggregate maximum size of aggregate not exceding 25mm , mixed in a concrete of not less than 0.2cum capacity and appropriate weigh batcher using approved mix design ,laid in approved fixed side formwork ( steel channel ,laying and fixing of 125 micron thick plythene film ,wedges ,steel plates including levelling the formwork as per drawing ) spreading the concrete with shovels , rakes , compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion , constrution joints ,applying debonding strips , primer , sealant , dowel bars , near approaches to bridge/ culvert and construction joints, admixtures as approved , curing of concrete slab for 14 days curing compound (where specified) and water finishing to lines and grade as per drawing and technical specification clause 1501. 103 km stone reinforced cement concrete m15 grade kilometre local stone of standard design asper irc:8 fixing in position including painting and printing , etc as per drawing and technical specification clause 1703. 104 200 m stone reinforced cement concrete m15 grade kilometre local stone of standard design asper irc:8 fixing in position including painting and printing , etc as per drawing and technical specification clause 1703. 105 600 mm equilateral & triangle providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as perdrawings and technical specification clause 801 106 600 mm circular providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as perdrawings and technical specification clause 801 107 600 mm x 450 mm rectangular providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as perdrawings and technical specification clause 801 108 reinforced cement concrete m15 grade boundary pillars/local stone of standard design as per irc:25, fixed in position including finishing and lettering but excluding painting as per drawing and technical specification clause 1704 109 planting of trees by the road side (avenue trees) in 0.60 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, planting the saplings, backfilling the trench, watering, fixing the tree guard and maintaining the plants for one year 110 providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads@ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per irc:35.the finished surface to be level, uniform and free from streaks and holes. (bt) 111 providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads@ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per irc:35.the finished surface to be level, uniform and free from streaks and holes. (pcc) 112 providing and fixing of typical mmgsy informatory sign board with logo as per mord specifications and drawing. three ms plates of 1.6 mm thick, top and middle plate duly welded with ms flat iron 25mm x 5m size on back on edges.the lower plate will be welded with ms angle iron frame of 25mm x 25mm x 5mm. the angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 swg sheet tubes posts duly embedded in cement concrete m 15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level.the top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 swg steel plate tube.all m.s. will be stove enameled on both sides.lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour.all sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing clause 1701 and annexure 1700.1 113 brick masonry work in cement mortar 1:3 in parapet excluding pointing and plastering as per drawing and technical specifications clauses 600, 900 and 1208.4 114 plastering with cement mortar (1:4 ) on brick work in sub structure as per technical specifications 115 painting two coats including primer coat after filling the surface with synthetic enamel paint in all shades on new, plastered / concrete surfaces as per drawing and technical specification clause 1701 116 add labour cess @ 1% 117 add gst @ 18% 118 seigniorage fee 119 1st year maintenance cost 120 2nd year maintenance cost 121 3rd year maintenance cost 122 4th year maintenance cost 123 5th year maintenance cost 124 add labour cess @ 1% 125 add gst @ 18% 126 seigniorage fee 127 name of road l035 to navtoliclearing and grubbing road land (by manual means)including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees ofgirth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i 128 construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 100 m as per technical specification. 129 construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification. 130 wbm grading iii providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smoothwheel roller 80 100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification. 131 providing and applying primer coat with bitumen emulsion (ss 1)on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 1.0 kg/sqm using mechanical means as per technical specification clause 502. 132 providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503. 133 providing and laying semi dense bituminous concrete with 100 120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 508 complete in all respects. 134 construction of un reinforcedplain cement thickness as perdesign , over a prepared sub base with 43 grade cement or any other type as per clause 1501.2.2 m 30 grade coarse and fine aggregate maximum size of aggregate not exceding 25mm , mixed in a concrete of not less than 0.2cum capacity and appropriate weigh batcher using approved mix design ,laid in approved fixed side formwork ( steel channel ,laying and fixing of 125 micron thick plythene film ,wedges ,steel plates including levelling the formwork as per drawing ) spreading the concrete with shovels , rakes , compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion , constrution joints ,applying debonding strips , primer , sealant , dowel bars , near approaches to bridge/ culvert and construction joints, admixtures as approved , curing of concrete slab for 14 days curing compound (where specified) and water finishing to lines and grade as per drawing and technical specification clause 1501. 135 km stone reinforced cement concrete m15 grade kilometre local stone of standard design asper irc:8 fixing in position including painting and printing , etc as per drawing and technical specification clause 1703. 136 200 m stone reinforced cement concrete m15 grade kilometre local stone of standard design asper irc:8 fixing in position including painting and printing , etc as per drawing and technical specification clause 1703. 137 600 mm equilateral & triangle providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as perdrawings and technical specification clause 801 138 600 mm circular providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as perdrawings and technical specification clause 801 139 600 mm x 450 mm rectangular providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as perdrawings and technical specification clause 801 140 planting of trees by the road side (avenue trees) in 0.60 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, planting the saplings, backfilling the trench, watering, fixing the tree guard and maintaining the plants for one year 141 providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads@ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per irc:35.the finished surface to be level, uniform and free from streaks and holes. (bt) 142 providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads@ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per irc:35.the finished surface to be level, uniform and free from streaks and holes. (pcc) 143 providing and fixing of typical mmgsy informatory sign board with logo as per mord specifications and drawing. three ms plates of 1.6 mm thick, top and middle plate duly welded with ms flat iron 25mm x 5m size on back on edges.the lower plate will be welded with ms angle iron frame of 25mm x 25mm x 5mm. the angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 swg sheet tubes posts duly embedded in cement concrete m 15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level.the top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 swg steel plate tube.all m.s. will be stove enameled on both sides.lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour.all sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing clause 1701 and annexure 1700.1 144 brick masonry work in cement mortar 1:3 in parapet excluding pointing and plastering as per drawing and technical specifications clauses 600, 900 and 1208.4 145 plastering with cement mortar (1:4 ) on brick work in sub structure as per technical specifications 146 painting two coats including primer coat after filling the surface with synthetic enamel paint in all shades on new, plastered / concrete surfaces as per drawing and technical specification clause 1701 147 providing concrete for plain/reinforced concrete m 20in coping over protection wall complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 p.c.c grade m 20 (protection wall ) 148 earth work in excavation for foundation of structures upto 3.0 m depth as per drawing and technical specification clause 1104 149 brick flat soling in foundation: brick flat soling in foundation trenches as per drawing and technical specification clause 1108 150 providingpcc grade m15 for plain/reinforced concrete in open foundations complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 151 brick masonary work in cement mortar (1:4) in head wall complete as per drawing and technical specification clause 1109 in cement mortar 1:4 152 plastering with cement mortar (1:4 ) on brick work in sub structure as per technical specifications 153 add labour cess @ 1% 154 add gst @ 18% 155 seigniorage fee 156 1st year maintenance cost 157 2nd year maintenance cost 158 3rd year maintenance cost 159 4th year maintenance cost 160 5th year maintenance cost 161 add labour cess @ 1% ...

Due Date : September 03, 2024

Tender Value : ₹ 6.27 Crore

View Tender
14
Department of Higher Education - Bihar

44931435 bids are invited for sitc iot and ai iot based intelligent lamp , iot data acquisition systems and protocol converters , microcontroller kits along with programming software , sensor trainer kit , sensors for green house application , weather monitoring system , iot based smart car parking , iot based smart air quality monitoring system , wearable wireless biomedical kit , learning kit , computer networking and security work bench , ai kit total quantity : 288...

Due Date : September 17, 2024

Tender Value : ₹ Ref. Documents

View Tender
15
National Thermal Power Corporation Limited - Bihar

44910052 supply of forbes marshall spares for eqms analyzer at ntpc nabinagar , ph anlsr:ph sensor model:ht238411:forbes , ph analysr:sensor cable :ht355184:forbes , ph analyser:ph card :awa ea307 fm:forbes , ph anlsr:flw thru chmbr:ftcpp135rtd:frbs , optical filter,oe2254,forbes marshall , optical filter,oe2550,forbes marshall , 4 20 output module,ea 306,forbes , mvux card,awa ea313,forbes marshall , water detector set,me 610,forbes , pwr sply card,awa ee890,forbes marshall , peristaltic pump hd,he 731,forbes , smplg pump mtr,he 741,forbes,cx1000 3922 , rs485 card&eeprom,ea309 ee732,forbes , 8 ch scanner,forbes,cx1000 3922 , flow through chamber,ftcturbhdpe,forbes...

Due Date : August 30, 2024

Tender Value : ₹ Ref. Documents

View Tender
16
Department Of Heavy Industry - Bihar

44894227 bids are invited for lighting fixtures lamps and misc items for barh i fgd , lighting luminaires complete with accessories luminaire type fc06 led , lighting luminaires complete with accessories luminaire type fc81 led , lighting luminaires complete with accessories luminaire type fc07 led dc , lighting luminaires complete with accessories luminaire type fc33 led dc , lighting luminaires complete with accessories luminaire type fc34 led dc , lighting luminaires complete with accessories luminaire type sf63 led , lighting luminaires complete with accessoriesluminaire type sb02 led , lighting luminaires complete with accessories luminaire type sb03 led , lighting luminaires complete with accessories luminaire type ss62 led , lighting luminaires complete with accessoriesluminaire type sw41 led , lighting luminaires complete with accessories luminaire type sw42 led , lighting luminaires complete with accessories luminaire type fc30 led , switch boxes for individual control of circuits type swb1 decorative , switch boxes for individual control of circuits type swb2 decorative , switch boxes for individual control of circuits type swb3 decorative , switch boxes for individual control of circuits type swb4 decorative , junction boxes type jb f , junction boxes type jb fe , receptacles type ra , receptacles type rb , receptaclestype rc , ceiling fan 1200 mm sweep , pedestal fan , emergency lighting units with ni cd battery and 2 x 10w led , flexible conduit, terne coated , free standing adjustable from 5m to 10m aluminium ladder , 10m high car wheel mounted adjustable aluminium ladder adjustable upto 10m high , exit sign , occupancy sensor , driverluminaire type fc06 led , driver luminaire type fc07 led dc , driver luminaire type fc33 led dc , driverluminaire type fc34 led dc , driver luminaire type fc30 led , driver luminaire type fc81 led , driver luminaire type sb02 led , driver luminaire type sb03 led , driverluminaire type sf63 led , driver luminaire type ss62 led , driver luminaire type sw41 led , driver luminaire type sw42 led , structural steel , hume pipe 100 mm dia , 14 swg wire , 25x6 mm gs flat , 50x6 mm gs flat , 40 mm dia ms rod , lighting luminaires complete with accessories luminaire type fc06 led mandatory spares , lighting luminaires complete with accessories luminaire type fc81 led mandatory spares , lighting luminaires complete with accessories luminaire type fc07 led dcmandatory spares , lighting luminaires complete with accessories luminaire type fc33 led dc mandatory spares , lighting luminaires complete with accessoriesluminaire type fc34 led dc mandatory spares , lighting luminaires complete with accessories luminaire type sf63 led mandatory spares , lighting luminaires complete with accessories luminaire type sb02 led mandatory spares , lighting luminaires complete with accessories luminaire type sb03 led mandatory spares , lighting luminaires complete with accessories luminaire type ss62 ledmandatory spares , lighting luminaires complete with accessories luminaire type sw41 led mandatory spares , lighting luminaires complete with accessories luminaire type sw42 led mandatory spares , lighting luminaires complete with accessories luminaire type fc30 led mandatory spares total quantity : 18719...

Due Date : August 27, 2024

Tender Value : ₹ Ref. Documents

View Tender
17
Department Of Heavy Industry - Bihar

44892442 bids are invited for lighting fixtures lamps and misc items for barh ii fgd , lighting luminaires complete with accessories luminaire type fc06 led , lighting luminaires complete with accessories luminaire type fc81 led , lighting luminaires complete with accessories luminaire type fc07 led dc , lighting luminaires complete with accessories luminaire type fc33 led dc , lighting luminaires complete with accessories luminaire type fc34 led dc , lighting luminaires complete with accessories luminaire type sf63 led , lighting luminaires complete with accessoriesluminaire type sb02 led , lighting luminaires complete with accessories luminaire type sb03 led , lighting luminaires complete with accessories luminaire type ss62 led , lighting luminaires complete with accessoriesluminaire type sw41 led , lighting luminaires complete with accessories luminaire type sw42 led , lighting luminaires complete with accessories luminaire type fc30 led , switch boxes for individual control of circuits type swb1 decorative , switch boxes for individual control of circuits type swb2 decorative , switch boxes for individual control of circuits type swb3 decorative , switch boxes for individual control of circuits type swb4 decorative , junction boxestype jb f , junction boxes ty pe jb fe , receptacles type ra , receptacles type rb , receptaclestype rc , ceiling fan 1200 mm sweep , pedestal fan , emergency lighting units with ni cd battery and 2 x 6w led , flexible conduit, terne coated , free standing adjustable from 5m to 10m aluminium ladder , 10m high car wheel mounted adjustable aluminium ladder adjustable upto 10m high , exit sign , occupancy sensor , driverluminaire type fc06 led , driver luminaire type fc07 led dc , driver luminaire type fc33 led dc , driverluminaire type fc34 led dc , driver luminaire type fc30 led , driver luminaire type fc81 led , driver luminaire type sb02 led , driver luminaire type sb03 led , driverluminaire type sf63 led , driver luminaire type ss62 led , driver luminaire type sw41 led , driver luminaire type sw42 led , lighting luminaires complete with accessoriesluminaire type fc06 led mandatory spares , lighting luminaires complete with accessories luminaire type fc81 led mandatory spares , lighting luminaires complete with accessories luminaire type fc07 led dc mandatory spares , lighting luminaires complete with accessoriesluminaire type fc33 led dc mandatory spares , lighting luminaires complete with accessories luminaire type fc34 led dc mandatory spares , lighting luminaires complete with accessories luminaire type sf63 led mandatory spares , lighting luminaires complete with accessoriesluminaire type sb02 led mandatory spares , lighting luminaires complete with accessories luminaire type sb03 led mandatory spares , lighting luminaires complete with accessories luminaire type ss62 led mandatory spares , lighting luminaires complete with accessories luminaire type sw41 led mandatory spares , lighting luminaires complete with accessories luminaire type sw42 ledmandatory spares , lighting luminaires complete with accessories luminaire type fc30 led mandatory spares total quantity : 4197...

Due Date : August 27, 2024

Tender Value : ₹ Ref. Documents

View Tender
18
East Central Railway - Bihar

44890540 supply of air spring sensor with suitable female connector, operating range 0 10 bar, operating voltage 10 30v dc, output 4 20 ma, conforming to ip65, make: jumo or similar [ warranty period: 30 months after the d ate of delivery ] ]...

Due Date : October 07, 2024

Tender Value : ₹ Ref. Documents

View Tender
19
Border Security Force - Bihar

44873878 tender for supply, installation, testing & commissioning of 06 (six) nos. inverter type 4.0 tr, 3 phase cassette split type air conditioners and 02 nos air curtain for human evolution gallery at shrikrishna science centre (ssc), chajju bagh, west gandhi maidan, patna 800001 (bihar) ; 1 electronics & electrical items : 2 supply, installation, testing and commissioning ofinverter typecassette split air conditioning unit 4.0 tr capacity one outdoor unit415v/50 hz/3 ph., one indoor unit 230 v/ 50hz/1ph ,singlescroll/ twin rotorycompressor thermo sensor temperaturecontrol, 4 way air direction timer setting, auto air swing, multifunction remote, with r 32/410a eco friendly refrigerant and minimum 2 star energy efficient , cost will be inclusive of installation at site as per instructions of the engineer in charge, complete in all aspects. 3 supply and fixing of wall/floor mounting brackets suitable for holding the outdoor unit structure made of 50mmx50mmx5mm ms angle for installation of outdoor unit with anit virbation pad including grouting on wall/floor etc as required depending o nsite condition and as per the instuctions. grouting to be done by cutting necessary holes and grouting with m12 anchor fasteners/cement concrete 1:2:4 and making good the damages with similar finish, two coats of synthetic enamel paint over a coat of metal primer 4 supply and fixing of copper pipe line with good quality high density nitrile rubber foam insulation pipe covering with flexible pvc pipe all complete as per standard specification and practicewith proper saddling (s.s saddle) on wall / terrace including making good the damages with cement mortar 1:2:4 on walls /floor with similar finish.(payment will be made as per actual execution) copper line sizes for4.0tr cassette type air conditioning unit 9.52mmx0.8mm+15.88x0.9mm (liquid line &suction line) ’copper line (payment will be made as per actual execution) 5 supply and laying of control cable of 2.5 sq. mm 4core along with suitable pvc conduitfor indoor unit to outdoor unit along with suitable pvc conduit. (payment will be made as per actual execution) 6 supply installation & testing of 415 volts motor starter and 40amps 4 pole isolator with box complete with connection etc (relay setting 12 16 amp) 7 supply and laying of control cable for mcbto outdoor unit 4.00 sq. mm 4 core pvc insulatedcopper wire + double earthing gi wire . (payment will be made as per actual execution) 8 supply and fixing isi mark extra upvc pipe 25mm/32mm dia with 6.00 mm thick insulation nitrile rubber closed cell, elbow, tee socket for condensate water drainage. (payment will be made as per actual execution) 9 the acs indoor outdoor connection pipeline (copper pipe & cable wire) and water drain pipes are not to rest on false ceiling. they are to be laid by hanging from ceiling with proper supports of gi cable tray (6 thinckness 1mm or more) with proper clamps. supply and fixing heavy duty trough type gi cable tray (6 x 3 x 12ft). (payment will be made as per actual execution) 10 supply, installation, testing and commissioning of air curtain , size 5 feet or more, height covered up to 10 feetmax velocity high 23m/s, low 16m/sfront sloted sleek modelcolour white, front suction suitable for 24x7 operation ...

Due Date : September 14, 2024

Tender Value : ₹ Ref. Documents

View Tender
20
National Thermal Power Corporation Limited - Bihar

44868306 procurement of forbes marshall spares for ntpc barh , sample cooler, dhx 06 0 0 1 0 0,forbes isolation valve, vgw17072003 isolation valve, vgw17078003 prs red vlv,c4w sprv,forbes marshall sample relief valve,50 013 1031969 back press reg valve,fgf4w2011720 flow switch,fs wp adf,forbes marshall cation column, fgf4w2011733, forbes wtr level sensor, rwc150tr(50trx3nos) fm flow switch,fqs u30g (061h4000), fm therml exp vlv elem, te12tex12067b3210,fm thermal exp vlv body, τε12 (067b4023),fm solenoid valve, 032l1240, forbes marshall hp/lp pr switch,kp15060126591,fm smpl cooler, dhx1815100, forbes marshall...

Due Date : August 29, 2024

Tender Value : ₹ Ref. Documents

View Tender
21
Bihar State Building Construction Corporation Limited - Bihar

44857729 tender for purchase of computer and other items desktop 17 make: hp/dell/lenovo intel core i7 12 gen, window 11pro, 32gb ram ddr4 3200mhz, 512 gb ssd 1tb hdd, monitor 24, dedicated graphics 1gb keyboard mouse optical, with ms office professional plus 2021and 3 years warranty. desktop 15 make: hp/dell/lenovo intel core i5 12 gen, window 11pro, 16gb ram 3200mhz, 512 gb dora ssd, 1tb hdd, monitor 24, keyboard mouse optical, with ms office professional plus 2021and 3 years warranty laptop 15 make: hp/dell/lenovo intel core i5 12 gen, window 11pro, 16gb ram dora 3200mhz, 512 gb ssd, monitor 15, ms office professional plus 2021 and 3 years warranty a3 scanner make hp/epson/canon hatbed specifications ad flatbed color image scanner, fixed document and moving carriage, 600dpi×600dpi, adf specifications a3 sheet fed, one pass duplex scanner, fixed carriage and moving document 600 dpi x 600 dpi, multi feed detection ultrasonic sensor connectivity: hi speed usb, compatible with usb 2.0/3.0. color printer a4 make hp/canon/brother color printer with print, scan, copy & adf print resolution: up to 600x600dpi, print speed: upto 16ppm. print technology: laser, connectivity: hi speed usb, compatible with usb2.0 supportedh media types: paper (plain, laser), envelop, postcard, b/w printer a4 make hp/canon/brother printer with print, scan, copy & ade print resolution upto600x600dpi print speed lipto 14ppm, print technology: monochrome laser, connectivity: hi speed usb, compatible with usb2.0/3.0 types: paper(plain, laser),envelop, postcard. monitor 27 inch make hp/dell eye safe full hd ips 27 computer monitor 60.8 x 18.8 x 43.7 cm. vga, hdmi, fhd 1080p, 1920 x 1080 pixels desk mount external hard disk(1tb) make hp/wd/samsung printer usb cable length 2mtr make hp/equivalent....

Due Date : September 03, 2024

Tender Value : ₹ Ref. Documents

View Tender
22
East Central Railway - Bihar

44855815 supply of 1)jzv card for wsp of lhb coaches to escorts drg. no. 3eb 8242/1. 2)speed sensor assembly complete along with 2 mtrs cable and accessories to escorts drg. no.: 3eb 8342. 3)manifold assembly (iso cock, filter,ch,tp) escort make 4)manifold isolating cock with vent1)jzv card for wsp of lhb coaches to escorts drg. no. 3eb 8242/1. 2)speed sensor assembly complete along with 2 mtrs cable and accessories to escorts drg. no.: 3eb 8342. 3)manifold assembly (iso cock, filter,ch,tp) escort make 4)manifold isolating cock with vent,speed sensor assembly complete along with 2 mtrs cable and accessories to escorts drg. no.: 3eb 8342. [ warranty period: 30 months after the date of delivery ] ] , manifold assembly (iso cock, filter,ch,tp) escort make [ warranty period: 30 m onths after the date of delivery ] ] , manifold isolating cock with vent [ warranty period: 30 months after the date of deliv ery ] ] , jzv card for wsp of lhb coaches to escorts drg. no. 3eb 8242/1. [ warranty pe riod: 30 months after the date of delivery ] ]...

Due Date : September 09, 2024

Tender Value : ₹ Ref. Documents

View Tender
23
Indian Oil Corporation Limited - Bihar

44809575 procurement of fire water diesel engine spares at iocl barauni refinery , list of item(s) / work(s) as per tender documents , air fltr element safety p/n:141109234243 , fltr insrt with o ring,p/n:001200240912, , primary af element,p/n:141109234242 , cam bush,p/n:200604320012,12v14tag, , cam bush,p/n:200604320022,12v14tag, , lub oil filter 234,p/n:605412970039, , filter element with o ring,1200240911 , set of gaskets,p/n:201200190287,12v14tag , gasket cylinder head,p/n:201208540024 , set of hoses,p/n:20120019037,12v14tag, , rocker lever assy.,p/n:200606450027, , set of o rings,p/n:123200190438 , oil seal flywheel side,p/n:604960651332 , oil seal,p/n 604960650951,greaves , piston assy.,p/n:200601600027,12v14tag, , piston ring set,p/n 105032110026, , push rod,p/n:623203210034,12v14tag, , radiator pre mix,p/n 141100195038 , set sealing rings,p/n:123200190358, , sensor switch,p/n:101190770226,12v14tag, , lop sensorcumsw,p/n:100007761195, , vlv seat insert inlet,p/n:200603450012, , vlv seat insert exhaust,p/n 200603450022 , inlet valve,p/n:200604600014,12v14tag, , valve bridge,p/n:200606450054,12v14tag, , exhaust valve,p/n:200604600024,12v14tag, , valve stem seal,p/n:p04960650121, , thrust washer bottom,p/n:200603400024 , thrust washer top,p/n:200603400014, , e p unit krb202,p/n:100007760955, , piston cooling noz,p/n:200604650015, , liner,p/n:200601320014,12v14tag,greaves , conrod brg.set,p/n:201204300027,12v14tag , injector sleeve,p/n:200603300014, , assy.lub pump,p/n:201207300057,12v14tag, , pipe lop to crankcase,p/n:201209010055 , o ring liner,u/n 104932111185,greaves , motorpal repair kit2 u/n:10520024,greave , charging alternator 24v,u/n:105710100142 , poly v belt 3pk1495,u/n:103460221495 , thermostat element,u/n:p05250100002 , pick up with m f conn,u/n:100007762414 , o ring injector sleeve,u/n:104932111194 , drpm with o/s 12/24v,u/n:105652090174 , tbdv12 marine aftr coolr,un:623409450044 , turbo_he300fg_b,u/n:105292001477 , turbo_he300fg_a,u/n:105292001478 , control card mtrpal fip,u/n:105200246059 , strter remy mdl 42mt,u/n:105720520022 , heat exch 500kva new d,u/n:201207500015 , fuel pipe,u/n 201209010155,12v14tag , pipe,u/n 201209421445,12v14tag,greaves , cable harness,u/n 201290770116,12v14tag , main bearing std.141104306017 , thrust wsr(cr.shaft)top,u/n p21103400014 , thrust washer (bottom)/p21103400024 , cylinder linner 141101320074 , piston assy+ring set,u/n 141101604156 , inlet valve p/n p21104600014 , exhaust valve p/n p21104600024 , valve seat exhaust part no. 141103450014 , valve seat inlet part no.141103450024 , valve guide 141103320014 , valve steam seal p04960650121 , turbo tr 59 2.471n 6.11,u/n p05292000081 , pipe out after cooler,u/n 141109427635 , gskt set,u/n 141100190559,4g11t,greaves , gskt kit o/h,u/n:141108530494,4g11t , lub oil filter p/n 605411880008 , filter element w/o ring,p/n:001200240911 , filter insert with ring,p/n:001200240912 , air filter,u/n 141109234232,4g11t,greave , water pump 4g,u/n 141107310077,4g11t , lop switch/ pn:100007761195 , procom econ f contrl,u/n 100007762864 , 6 cable harness g11 prcom,10119077032 , 24v relay card,u/n 107120130053 , magnetic pickup/pn:100007760796 , ele.governor card esd5111,106902090053 , o ring p/n 604931070183 , water manifold assy,u/n 141109104007...

Due Date : September 02, 2024

Tender Value : ₹ Ref. Documents

View Tender
24
Hpcl Biofuels Limited - Bihar

44787555 supply of ethanol and dm plant lab chemicals , supply ethanol and dm plant lab chemicals as per below descriptions: , phosphate test kit, 1.14449.0001(range 1 40 mg/ltr. ),make: merck , silica test (lower) kit, 1.14410.0001(range 0.02 0.53 mg/ltr sio2),make: merck , silica test kit(higher) 1.14792.0001(0.3 10 mg/ltr si), make: merck , ammonia buffer solution,,500ml,,make::merck/ranchem/fischer/sd fine chem , edta soln(0.02 n),,500 ml,, make: merck/ranchem/fischer/sd fine chem , hardness kit lower range, make merck/ ion exchange. , hardness kit higher range, make merck/ ion exchange , universal ph indicator,,500ml,, make: merck only , buffer capsule,ph 7,make::merck/ranchem/fischer/sd fine chem , buffer capsule ph 9.2,make::merck/ranchem/fischer/sd fine chem , buffer capsule ph 4.0,,make::merck/ranchem/fischer/sd fine chem , fehling solutiona ( make merck) 500ml , fehling solutionb ( make merck) 500ml , filter paper ordinary size 18.5cm (100 pcs) , thermometer make zeal range 0 to 120 degree centigrade, red mercury , hydrochloric acid lr grade , sulphuric acid lr grade , glass beaker ,250ml,make:borosil , glass beaker ,500ml,make:borosil , glass beaker ,50ml,make:borosil , measuring cylinder500mlmake: borosil , conical flask 250 mlmake: borosil , burette 50 mlmake: borosil , cover slip (1 container contained 10 pieces) , slight glass (1 container contained 10 pieces) , digital eutech conductivity meter co 700 table type make eutech with sensor , digital eutech ph meter table type make eutech with sensor...

Due Date : September 02, 2024

Tender Value : ₹ Ref. Documents

View Tender
25
Bharat Heavy Electricals Limited - Bihar

44759563 765kv gis for ntpc nabinagar project pre bid tie up for 765kv gis for 3x800 mw ntpc nabinagar super thermal power project stage ii , gis bay supply: 765kv, 3150a, 50 ka, sf6 gis gt feeder bay module (including sf6 gas, structure, hardwares & earthing materials) as per ts , gis bay supply: 765kv, 3150a, 50 ka, sf6 gis transformer feeder bay module (including sf6 gas, structure, hardwares & earthing materials) as per ts , gis supply: additional equipments for interfacing of transformer feeder to auxiliary busbar module (including sf6 gas, structure, hardwares & earthing materials) as per ts , gis bay supply: 765kv, 3150a, 50 ka, sf6 gis bus reactor feeder bay module (including sf6 gas, structure, hardwares & earthing materials) as per ts , gis bay supply: 765kv, 3150a, 50 ka, sf6 gis line feeder bay module (including sf6 gas, structure, hardwares & earthing materials) as per ts , gis bay supply: 765kv, 3150a, 50 ka, sf6 gis tie bay module (including sf6 gas, structure, hardwares & earthing materials) as per ts , gis supply: 765kv, 4000a, 50 ka, sf6 gis bus bar module (including sf6 gas, structure, hardwares & earthing materials) as per ts , gis supply: 765kv, 4000a, 50 ka, sf6 gis auxiliary busbar module for spare transformer (including sf6 gas, structure, hardwares & earthing materials) as per ts , gis supply: 765kv, 50 ka, sf6 bus vt bay module (including sf6 gas, structure, hardwares & earthing materials) as per ts , gis supply: 765kv, online pd monitoring system (opms) for 765kv gis system , gis supply: 765kv, controlled switching device (csd) for 765kv, 3 ph circuit breaker , supply gis : 765kv, 3150a, 1 phase gas insulated bus duct (including sf6 gas, structure with hardwares and earthing materials) , gis supply: 765kv,3150a, 1 phase sf6 to air bushing (polymer) (including sf6 gas, structure with hardwares and earthing materials) , gis supply: local control cubicles , gis supply:sf6 gas filling and evacuating plant , gis supply: sf6 gas processing unit , gis supply: sf6 gas analyzer , gis supply: sf6 gas leakage detector , gis supply: operational analyser with dcrm kit , gis supply: dew point meter , gis supply: partial discharge measurement set , gis supply: portable leakage current analyzer (for gapless surge arrester), , spare gis:switchyard 765kv gis switchgear sf6 gas pressure relief devices of each type along with o rings , spare gis:switchyard 765kv gis switchgear sf6 gas gauge cum switch or density monitors and pressure switch as applicable of each type5% of total population ( max 5nos and min,1no) , spare gis:switchyard 765kv gis switchgear coupling device of each type for pressure gauge cum switch for connecting gas handling plant , spare gis:switchyard 765kv gis switchgear rubber gaskets, “o” rings and seals for sf6 gas of each type of circuit breaker, disconnector and other gis equipment’s . , spare gis:switchyard 765kv gis switchgear molecular filter for sf6 gas with filter bags ( 5% of total weight ) , spare gis:switchyard 765kv gis switchgear all type of control valves for sf6gas of each type , spare gis:switchyard 765kv gis switchgear sf6 gas cylinders of 50kgs / cylinder (20% of total gas quantity ) , spare gis:switchyard 765kv gis switchgear locking device to keep the dis connectors and earthing switches in close or open position in case of removal of the driving mechanism (if applicable , spare gis:switchyard 765kv gis switchgear spares for local control cabinet: mcb, fuses, timers, aux relay of each type & rating, terminals of each type (set) , spare gis:switchyard 765kv gis switchgear uhf pd sensors of each type 5% of total population(max 5nos and min 1no) , spare gis:switchyard 765kv gis switchgear bus support insulator / gas barrier of each type along with associated contacts and shields , spare gis:switchyard 765kv gis switchgear sf6 to air bushing of each type & rating along with conductor and enclosure for 1 phase enclosure , spare gis:switchyard 765kv gis switchgear all types of corona shield (3 nos. of each type) , spare gis: gis circuit breaker ( 765kv) one complete pole (1phase unit ) of circuit breaker including csd/closing resistor, grading capacitor(as applicable), of each type & rating complete with , interrupter, main circuit , enclosure and marshalling box with operating mechanism to enable replacement of any type / rating of cb by spare (1no of each type & rating ) , spare gis: gis circuit breaker ( 765kv) tripping coils assembly with resistors as applicable r (3nos of each type) , spare gis: gis circuit breaker ( 765kv) closing coil assembly with resistor as applicable (3nos of each type) , spare gis: gis circuit breaker ( 765kv) relays, power contactors, push buttons, timers & mcbs etc of each type & rating( if applicable) , spare gis: gis circuit breaker ( 765kv) aux. switch assembly, 3 nos. of each type , spare gis: gis circuit breaker ( 765kv) operation counter, 3 nos. of each type , spare gis: gis circuit breaker ( 765kv) window scope/ observing window, 3 nos. ofeach type (if applicable) , spare gis: gis circuit breaker ( 765kv) spare of hydraulic operated mechanism if applicable:spare of hydraulic operated mechanism 1 set for each type of circuit breaker [a] hydraulic operating mechanism with drive motor of each type – 1 no. [b] ferrules and joints & couplings of each type – 1 set [c] hydraulic filter of each type – 1 set [d] high pressure hose of each type – 1 set [e] n2 accumulator of each type – 2 no. [f] pressure transducers – 1 no. [g] valves of each type – 1 set [h] o rings, gaskets and seals – 1 set [i] pressure gauges with coupling device of each type – 1 set [j] hydraulic oil – 20% of total used quantity in substation [k] limit switch – 1 no. of each type [l] pipe length (copper & steel) of each size & type 1 set [m] pressure switch of each type 2 nos [n] pressure relief device of each type 1 set , spare gis: gis circuit breaker ( 765kv) complete spring operating mechanism including charging mechanism etc of each type & rating , spare gis: gis circuit breaker ( 765kv) spring charging motor of each type & rating , spare gis:gis disconnector( 765kv) complete set of 3 nos. of single phase / one 3 ph isolator of each type , dimension , current &voltage rating including main circuit , enclosure ,driving mechanism and support insulator etc to enable replacement of any type / rating of isolator by spare , spare gis:gis disconnector( 765kv) complete set of 3 nos. of single phase / one 3 ph maintenance earthing switch of each type ,dimension , current & voltage rating includingmain circuit , enclosure , driving mechanism and support insulator etc to enable replacement of any type / rating of isolator by spare , spare gis:gis disconnector( 765kv) complete set of 3 nos. of single phase / one 3 ph fast earthing switch of each type ,dimension , current & voltage rating includingmain circuit , enclosure , driving mechanism and support insulator etc to enable replacement of any type / rating of isolator by spare , spare gis:gis disconnector( 765kv) copper contact fingers for isolator male &female contact along with corona shield for one complete ( 3phase) isolator of each type andrating , spare gis:gis disconnector( 765kv) copper contact fingers for maintenance earthing switch male & female contact along with corona shield for one complete ( 3phase) isolator of each type and rating , spare gis:gis disconnector( 765kv) copper contact fingers for fast earthing switch male & female contact along with corona shield for one complete ( 3phase) isolator of each type and rating , spares gis:open/ close contactor assembly, timers, key interlock , interlocking coils, relays , push buttons indicating lamps , power contactors, resistors, fuses mcbs & drive control cards etcfor one complete mom box ( 3 lh gang operated or 1 ph unit ) disconnector and ( 3ph ) earthingswitch of each type and rating for one complete(3phase) disconnector and earthing switch of each type & rating ( if applicable for isolator , spares gis:open/ close contactor assembly, timers, key interlock , interlocking coils, relays , push buttons indicating lamps , power contactors, resistors, fuses mcbs & drive control cards etcfor one complete mom box ( 3 lh gang operated or 1 ph unit ) disconnector and ( 3ph ) earthingswitch of each type and rating for one complete(3phase) disconnector and earthing switch of each type & rating ( if applicable for maintenance earth switch , spares gis:open/ close contactor assembly, timers, key interlock , interlocking coils, relays , push buttons indicating lamps , power contactors, resistors, fuses mcbs & drive control cards etcfor one complete mom box ( 3 lh gang operated or 1 ph unit ) disconnector and ( 3ph ) earthingswitch of each type and rating for one complete(3phase) disconnector and earthing switch of each type & rating ( if applicable for fast earthing switch , spare gis:limit switches and aux. switches for complete 3 phase equipment for isolator , spare gis:limit switches and aux. switches for complete 3 phase equipment for maintenance earth switch , spare gis:limit switches and aux. switches for complete 3 phase equipment for fast earthing switch , spare gis: motor drive mechanism of each type for isolator , spare gis: motor drive mechanism of each type for maintenance earth switch , spare gis: motor drive mechanism of each type for fast earthing switch , spare gis: gis current transformers ( 765kv)complete ct, of each type and with enclosure to enable replacement of any type / rating of ct as spare(1no of each type/ rating) , spare gis:gis voltage transformers ( 765kv) complete vt of each type and with enclosure to enable replacement of any type / rating of vt as spare ( 1no of each type / rating ) , spare gis:gis surge arrestor ( 765kv) complete surge arrestors of each type and with enclosure with surge monitor counter to enable replacement of any type / rating of vt as spare( 1no of each type / rating ) , spare gis:gis surge arrestor ( 765kv) surge monitor and counter of each type / rating ( 1no of each type / rating ) , spare gis:gis surge arrestor ( 765kv) 765kv air to sf6 bushing for transformers & reactor as applicable for each ( 1no of each type / rating ) , spare gis:gis surge arrestor ( 765kv) control switching device along with transducers, sensors, contactors, switches etc 1set of each make , spares gis: reference unit price for addition / deletion of supply items:765kv, operating mechanism for circuit breaker complete in all respect , spares gis: reference unit price for addition / deletion of supply items:765kv, operating mechanism for disconnector , spares gis: reference unit price for addition / deletion of supply items:765kv, operating mechanism for maintenance earthing switch complete in all respect , spares gis: reference unit price for addition / deletion of supply items:765kv, operating mechanism for fast acting/ high speed grounding switch complete in all respect , spares gis: reference unit price for addition / deletion of supply items:765kv, 1 phase maintenance earthing switch complete in all respect (excluding operating mechanism) , spares gis: reference unit price for addition / deletion of supply items:765kv, 3 phase fast acting/ high speed grounding switch complete in all respect (excluding operating mechanism) , spares gis: reference unit price for addition / deletion of supply items:765kv, single phase bus bar , spares gis: reference unit price for addition / deletion of supply items: 765kv, gis metallic enclosure , spares gis: reference unit price for addition / deletion of supply items: 765kv, expansion joints , spares gis: reference unit price for addition / deletion of supply items: 765kv, flexible connections , spares gis: reference unit price for addition / deletion of supply items: 765kv, barrier insulator , spares gis: reference unit price for addition / deletion of supply items: 765kv, non barrier insulator , spares gis: reference unit price for addition / deletion of supply items: 765kv, gas seals , spares gis: reference unit price for addition / deletion of supply items: 765kv, gas density monitor switch , spares gis: reference unit price for addition / deletion of supply items: 765kv, gas pressure switch , spares gis: reference unit price for addition / deletion of supply items: 765kv, tee bend , spares gis: reference unit price for addition / deletion of supply items: 765kv, angle bend , spares gis: reference unit price for addition / deletion of supply items: 765kv, l bend , services 765kv gis: supervision of erection of gis , services 765kv gis:supervision of erection of 1 phase gas insulated bus duct , services 765kv gis:supervision of erection of 1 phase sf6 to air bushing , services 765kv gis:testing & commissioning of gis , services 765kv gis : testing & commissioning of gas insulated bus duct , services 765kv gis : final successful hv/ power frequency testing of gis including arranging of hv test kit along with operator , services 765kv gis : insulation co ordination studies for gis system , services 765kv gis : training for gis at site , services 765kv gis : training for gis at manufacturer works , services 765kv gis : reference unit price for addition / deletion of services services for supervision of erection of gis , services 765kv gis : reference unit price for addition / deletion of services services for testing & commissioning of gis , services 765kv gis : reference unit price for addition / deletion of services: demobilization and remobilization charges for gis erection supervision team , services 765kv gis : reference unit price for addition / deletion of services: demobilization and remobilization charges for gistesting & commissioning team , services 765kv gis : reference unit price for addition / deletion of services: demobilization & remobilization charges ofhv test kit along with operator...

Due Date : August 27, 2024

Tender Value : ₹ Ref. Documents

View Tender
26
Indian Oil Corporation Limited - Bihar

44670516 bids are invited for multi gas detector (lel,o2,h2s and conh3so2c12 level) with pump combustible sensor detector (catalytic type) (iocl) (q2) total quantity : 50...

Due Date : September 02, 2024

Tender Value : ₹ Ref. Documents

View Tender
27
Northeast Frontier Railway - Bihar

44581874 supply of aecaec,axle end cover (speed sensor) for lhb coaches to drg.no 1902713, ver 06r1.mat. spec.: 17.33 4 100 06, sg 400/15 is:1865, mdts 166 (rev 02) [ warranty period: 30 months after the date of delivery ] ] dbrt workshop depot, nfr assam 4.00 numbers => limited...

Due Date : August 12, 2024

Tender Value : ₹ Ref. Documents

View Tender
28
Ministry Of Power - Bihar

44559714 bids are invited for fail freeze posidapt expert, remote mount asm position sensor, seals material viton diaph vlv seal pu equipment manufacturer total quantity : 94...

Due Date : August 16, 2024

Tender Value : ₹ Ref. Documents

View Tender
29
Hpcl Biofuels Limited - Bihar

44558693 supply and installation of electromelt auto direct electric melting of sulphur , a. supply portion electromelt system: auto direct electric melting of sulphur for batch type sulphur burner. 1. electromelt: low power quick heat system for melting of sulphur. 2. electric heaters: heavy duty ss 304/316l integrated casing electric heater suitable for quick heat generation power: 10 15 kw/hr. (electromelt) for asb. 3. control panel: microprocessor based auto digital heater control & monitoring in auto/manual modes. distribution & safety: 1 no. 4. temp. sensors, signal cables etc. 5. internal electric wires/cables from panel to heaters 180 mtrs. required sensors. b. service portion installation & commissioning of electromelt auto direct electric melting of sulphur for sulphur burner in boiling house. 1. actual erection will be carried out by vendor staff under vendor supervision. and boarding & lodging will be provided vendor 2. work shall be carried out as per the best engineering practices at sugar industries. 3. supplies shall be fully guaranteed against any manufacturing defects / poor workmanship/ inferior design or quality etc. for a period of 12 months from the date of commissioning or 18 months from the date of delivery whichever is earlier. during this period, seller will arrange to repair / replace any defective part free of cost or replace complete equipment, if required. vendor shall be held liable for any direct/consequential damage arising from a fault or malfunction of equipment to vendor’s own risk. the repair /replacement will be done at factory site (during guarantee period)....

Due Date : August 16, 2024

Tender Value : ₹ Ref. Documents

View Tender
30
Northeast Frontier Railway - Bihar

44548443 supply of 3 phase asynchronous motor (resistance ring mechanically interlocked to end plate design rotor, scheme ii), type 6fra 6068 for wag 9 loco without active speed sensor . spec: clw spec.no. 4tms.096.081 alt 3 or latest3 phase asynchronous motor (resistance ring mechanically interlocked to end plate design rotor, scheme ii), type 6fra 6068 for wag 9 loco without active speed sensor . spec: clw spec.no. 4tms.096.081 alt 3 or latest,3 phase asynchronous motor (resistance ring mechanically interlocked to end plate design rotor, scheme ii), type 6fra 6068 for wag 9 loco without active speed sensor . spec: clw spec.no. 4tms.096.0 81 alt 3 or latest [ warranty period: 30 months after the date of delivery ] ]...

Due Date : August 23, 2024

Tender Value : ₹ Ref. Documents

View Tender
31
Department of Agricultural Research and Education - Bihar

44546310 bids are invited for purchase of farm machinery for cra project tractor mounted sprayer , power tiller , multi crop thresher , tractor mounted repear com binder , seed cum fertilizer drill 11 tine , cultivator 13 tine , sugarcane cultivator , green seeker hand held crop sensor , high speed hay rake total quantity : 48...

Due Date : August 24, 2024

Tender Value : ₹ Ref. Documents

View Tender
32
East Central Railway - Bihar

44518606 supply of supply, erection, testing and commissioning of occupancy sensorsupply, erection, testing and commissioning of occupancy sensor,supply, erection, testing and commissioning of occupancy sensor for controlling light , fan and air c onditioner consisting of sensor 01 no , 40amp dp mcb 01 no , 40 amp contactor 01 no, mcb db 4 way 01 no, along with casing capping wiring with 1.5 sq.mm copper wire for light/fan and 4 sq.mm copper wire for ac. d etailed specification as per annexure a. [ warranty period: 30 months after the date of delivery ] ]...

Due Date : August 13, 2024

Tender Value : ₹ Ref. Documents

View Tender
33
Hpcl Biofuels Limited - Bihar

44504715 supply of spares and service support for 40 kva single phase ups system , supply of spares parts of 40 kva single phase ups system emerson make model no. hipuls, i/p 415 vac, output 230 vac, battery voltage 408 vdc as per below specification: , ups logic card , inverter logic cards , rectifier logic cards , hvi , rectifier driver card , inverter static card , bypass static card , parallel static , display , operation board , igbt , scr , holl sensor , cooling fan size 4” , servicing of online ups system: , deputation of service engineer for checking, servicing and repairing of faulty ups on site...

Due Date : August 12, 2024

Tender Value : ₹ Ref. Documents

View Tender
34
Eastern Railways - Bihar

44499574 supply of sensorsensor,sensor..voltage_10ma_vdcl to emd pt.no. :40026571 pl no. 18160062 [ warranty p eriod: 30 months after the date of delivery ] ]...

Due Date : September 06, 2024

Tender Value : ₹ Ref. Documents

View Tender
35
East Central Railway - Bihar

44457941 supply of set of speed sensor and hose pipesset of speed sensor and hose pipes,set of speed sensor and hose pipes for vande bharat as per annexure a, make ftil. [ warrant y period: 30 months after the date of delivery ] ]...

Due Date : August 05, 2024

Tender Value : ₹ Ref. Documents

View Tender
36
Ministry Of Power - Bihar

44334570 bids are invited for price bid wtr transducer kit 58547 81 alfa laval , solenoid valve 52550 80 alfa laval , temperature sensor 597256 01 alfa laval , pr transmitter blck 582752 81 alfa laval , shut off vv 1764621 01 alfa laval actr total quantity : 9...

Due Date : August 14, 2024

Tender Value : ₹ Ref. Documents

View Tender
37
Indian Oil Corporation Limited - Bihar

44181943 procurement of cfr engine make spares at iocl barauni refinery , list of item(s) / work(s) as per tender documents , plate oil heater,110v,p/n b3109a , spring for crf engine, p/n b6426 , solenoid assembly p/n a109334n , gasket, water inlet cap, pn 109421 , gasket, water pipe, pn b5096a , valve, intake p/n 23436b , bearing conn rod, p/n 106137a , washer, conn rod bolt lock p/n 111406a , oil filter element p/n 111346 , gasket manifold p/n b2557 , felt washer,intake valve cfr p/n b4680 , valve exhaust, p/n 106625a , ring piston, compression p/n 106222a , ring piston, comp, chrome p/n 106222b , ring piston, oil p/n 23505 , gasket, lower cyl guide plate p/n 106721 , gasket, upper cyl guide plate p/n b2544 , 1/8 nptf steel socket head pipe plug 3/ , carburetor sight glass gasket p/n 75976a , gasket gear tray for cetane engine,p/n 1 , gasket, cylinder base (0.003) p/n 10518 , gasket, cylinder base (0.010)p/n 1051 , exhaust pipe flange gasket p/n 110523 , nozzle, injector p/n 110700 , nut,intake manifold,5/16x24,p/n b5828 , surge tank gasket, p/n 109350 , injection spray gasket p/n 109281 , condenser body gasket p/n 75690 , nut,hex,.312 24,p/n 21186 , sensor, timing (inc hdwr) p/n 210903 , water temperature switch gauge p/n 11178 , cable, flywheel & injector sensor p/n 21 , rtd probe crankcase oil temperature a2 , fuse, 5 amp p/n 210875 , fuse, 10 amp p/n 210876...

Due Date : July 23, 2024

Tender Value : ₹ Ref. Documents

View Tender
38
East Central Railway - Bihar

44121700 supply of complete speed sensor assembly without pgr for igbt based locos with 5 plus 3 pin connector as per m/s bombardier transport item no. 000010 and part no. 3eyp401277r0001.complete speed sensor assembly without pgr for igbt based locos with 5 plus 3 pin connector as per m/s bombardier transport item no. 000010 and part no. 3eyp401277r0001.,complete speed sensor assembly without pgr for igbt based locos with 5 plus 3 pin connecto r as per m/s bombardier transport item no. 000010 and part no. 3eyp401277r0001. [ warranty period: 30 m onths after the date of delivery ] dsl depot patratu, ecr jharkhand 17.00 set...

Due Date : August 05, 2024

Tender Value : ₹ Ref. Documents

View Tender
39
Eastern Railways - Bihar

44109340 supply of plug, sensor turbo speed & heat shrink tubeplug, sensor turbo speed & heat shrink tube,plug cpc 23 22m (reference chart no.40027876 alt. kc) emd part no. 40019316 a nd blw pl. no. 18360221 for wdg4/wdp4 hhp locomotives (reference chart no.40027876 a lt. kc) emd part no. 40019316 and blw pl. no. 18360221 for wdg4/wdp4 hhp locomotives [ warranty period: 30 months after the date of delivery ] , sensor turbo speed (tpu) to emd pt no:40038643 pl no.16241332 [ warranty period: 30 months after the date of delivery ] , heat shrink tube to emd part no. 40048383 and blw pl.no. 18531131 for wdg4/ wdp4 hhp locomotives. [ warranty period: 30 months after the date of delivery ]...

Due Date : August 05, 2024

Tender Value : ₹ Ref. Documents

View Tender
40
Department of Defence Production - Bihar

44095625 bids are invited for heat detector sensor (wmx5000fs l200) , part no. 906401 operating voltage 7.6 to 30 v dc, mse exemption for turnover yes startup exemption for turnover yes additional doc 1 (requested in atc),additional doc 2 (requested in atc),additional doc 3 (requested in atc),additional doc 4 (requested in atc) total quantity : 8...

Due Date : August 23, 2024

Tender Value : ₹ Ref. Documents

View Tender
41
Hpcl Biofuels Limited - Bihar

44043513 supply of abb make instrument materials , smps rating o/p 24 vdc, 10a, model no cp e/24/10.0, make abb , smps rating o/p 24 vdc, 5a,model no cp e/24/5.0, make abb , 2 valve manifold block&bleed, ss316, part no : 46c163j, make abb , 5 valve manifold flg mntd t type, ss316, part no : i9677004, make abb , diaphram seal type level transmitter, make abb 2600t series, mwp ovp 16mpa, url 65kpa, lrl 65kpa, serial no. 10g1006,range 0 to 1350 mmwc , diaphram sealed differential pressure level transmitter, make : abb 2600t series, url 40kpa, lrl 40kpa,span limit : 0.4 to 40 kpa mwp 21mpa, range : 0 to 840 mmwc , 2600t series pressure transmitter, cal range 0 to 5kg/cm2 with local display, span 0 5kpa, o/p 4 20 ma (hart comptible), lrl0 kpa, url 2400kpa, make abb , 2600t series pressure transmitter, cal range ( ve) 1 to 5kg/cm2(absolute) with local display, span 24 2400kpa, o/p 4 20ma (hart comptible), lrl 7 kpa(abs), url 2400kpa(abs), make abb , 266drh high performance differential pressure transmitter with remote seal(s) model code: model : 266drh.f.s.r.r.s.a.7 .e6..ls + s26ra.h.g1.s.f.sm.1.n.1.s.n.n.n + s26ra.l.g1.s.f.sm.1.b.e.s.n.n.n. with details sensor span limits 0.67 40kpa, base accuracy 0.075%, maximum working pressure (static pressure) standard static 21 mpa (210bar, 3045 psi), diaphragm material / fill fluid aisi 316l ss / silicone oil, output standard hart digital communication and 4 to 20 ma, integral lcd standard digital lcd integral display, mounting flange rating / size asme cl 150 / 3 in.cal range 0 to 2575 mmwc url 40kpa, lrl ( ve) 40kpa, make abb , pressure transmitter, model code : 266hshmsba1e6l1b6, make abb , diffrential pressure transmitter, model code : 266dshfssa2a1v1e6l1b1, make abb , cpu pm554 tp eth, 8di 24vdc 6do t 24vdc 0.5a, with128kb memory, 1x rs485, for batch m/c, make abb , digital input/output module, model : dx561 a1, 8di : 24vdc sink/source, 1 wire, 8do : transistor 24vdc 0.5a, 1 wire,for batch m/c, make abb...

Due Date : July 26, 2024

Tender Value : ₹ Ref. Documents

View Tender
42
East Central Railway - Bihar

43985374 supply of supply, erection, testing and commissioning of occupancy sensorsupply, erection, testing and commissioning of occupancy sensor,supply, erection, testing and commissioning of occupancy sensor for controlling light , fan and air c onditioner consisting of sensor 01 no , 40amp dp mcb 01 no , 40 amp contactor 01 no, mcb db 4 way 01 no, along with casing capping wiring with 1.5 sq.mm copper wire for light/fan and 4 sq.mm copper wire for ac. d etailed specification as per annexure a. [ warranty period: 30 months after the date of delivery ]...

Due Date : July 24, 2024

Tender Value : ₹ Ref. Documents

View Tender
44
Hindustan Petroleum Corporation Limited - Bihar

43934919 bids are invited for supply of pneumatic and mechanical spares at hpcl purnea lpg plant pneumatic cylinder size 300mmx40 , toggle joint,gd and pt , tool box of taparia make containing 76 pcs , centering arm,108680,carousel , pneumatic cylinder size 320mmx50 , pneumatic cylinder size 400mmx40 , chain,duplex,1in , duplex 24 teeth sprocket bore 60 mm , duplex 14 teeth sprocket , duplex 28 teeth sprocket bore 60 mm , duplex 18 teeth sprocket , 30 teeth sprocket for gear box , 14 teeth sprocket , pneumatic cylinder model number a12063080o janatics , 8 teeth sprocket , clamping arm with roller for gd pt , shaft size60mm x 650 mm en 8 , shaft size40mm x 380 mm en 8 , brg unit,plummer block,ntn 212 , gd pt arm roller , pusher pad , pneumatic cylinder size 500mmx50 , filling gun pneumatic kosan o ring set , filling gun non pneumatic kosan o ring set , siraga make filling o ring set , stopper roller teflon , bar code sensor sick wll24 2x430s01 , pneumatic cylinder size 250mmx50 , pneumatic cylinder size 300mmx35 , seal for norgen make pneumatic cylinder of dia 50mm , seal for janatics make pneumatic cylinder of dia 50mm , solenoid coil for kosan filling scale , lpg hose of length 1 m , lpg hose of length 1.5 m , guide rod for ejection unit length as per kosan carousel , quick exhaust valve 1 4 festo or norgen , wd 40 spray 400 ml , pencil sensor , cuc card cover for mark iv , key pad for markiv , key pad for markii , rivet type conveyor chain , sensor sick wt24 diffusive type, total quantity : 1582...

Due Date : June 29, 2024

Tender Value : ₹ Ref. Documents

View Tender
45
Hpcl Biofuels Limited - Bihar

43934545 standing order for supply of instrument materials , pu tube od 6mm, with polyurethane tube od 8mm x tube id 6mm, wh00b06, with handling pressure 7 bar @ 50 to 60 degree, make : janatics. , pu tube od 8mm, with polyurethane tube od 8mm x tube id 6mm, wh00b08, with handling pressure 7 bar @ 50 to 60 degree, make : janatics. , pvc insulated cu tube od 8mm, specifications bs1710:2014astm88, en1057, p.v.c thickness 2mm, colur blue , ss seamless tube 1/2od material ss316,thickness0.065, make : standard , ss seamless tube 1/4od material ss316, thickness 0.035, make : standard , ss seamless tube 3/8od material ss316, thickness 0.035, make : standard , ss union tee 1/4 od, thickness 0.035, material ss316, make : standard , ss connector 1/2 npt (m) x1/2 o.d, material ss316, make : standard , ss connector 1/2 npt (f) x1/2 o.d, material ss316, make : standard , ss straight connector 1/2 o.d x1/2 o.d, material ss316,make : standard , ss straight connector 1/2 npt (m) x1/4 o.d,material ss316,make : standard , ss impulse pipe,1/2 sch80,material ss316,make : standard , ss reducer 1/2od x1/4 od, material ss316, make : standard , ss reducer 1/4npt(m) x1/4 od, material ss316, make : standard , ss u clamp for 15 nb pipe , three way manifold t type, material ss316, 3000#, make : standard , two way manifold, material ss316, 3000#, make : standard , socket weld elbow 1/23000# , threaded globe valve, 1/2npt(m)x 1/2 npt(f), material ss316, 3000#, make : standard , junction box,moc:die cast aluminium, dimension 400l x 350h x150 d:2 mm thick with specification (a)tb:48 nos, suitable fot 2.5 sqmm cable termination, (b)cable entery 3/4et, 6 no each side, bottom 1.25et,2nose doors:hinged, locable, ip65 protection, gasket elastomer, earthing:brass earth lug with green screw head with mounting accessories nut bolt etc. , pu connector , type straight, 8mm odx 1/2npt male, with handling pressure 7 bar @50 to 60 degree, make : janatics. , pu connector , type straight, 6mm odx 1/2npt male, with handling pressure 7 bar @ 50 to 60 degree , make : janatics. , pu connector , type straight, 8mm odx 3/8bsp male, with handling pressure 7 bar @ 50 to 60 degree, make : janatics. , pu connector , type straight,6mm odx 3/8bsp male, with handling pressure 7 bar @ 50 to 60 degree , make: janatics. , pu connector , type straight, 8mm odx 1/4npt male, with handling pressure 7 bar @ 50 to 60 degree, make : janatics. , pu connector , type straight, 6mm odx 1/8npt male, with handling pressure 7 bar @ 50 to 60 degree, make : janatics. , pu connector , type straight, 8mm odx 1/2npt female, with handling pressure 7 bar @ 50 to 60 degree, make : janatics. , pu connector ,type straight, 6mm odx 1/2npt female, with handling pressure 7 bar @ 50 to 60 degree, make : janatics. , pu connector , type straight, 8mm odx 3/8bsp female, with handling pressure 7 bar @ 50 to 60 degree, make : janatics. , pu connector, type straight, 6mm odx 3/8bsp female, with handling pressure 7 bar @ 50 to 60 degree, make : janatics. , pu connector , type straight, 8mm odx 1/4npt female, with handling pressure 7 bar @ 50 to 60 degree, make : janatics. , pu connector, type straight, 6mm odx 1/8npt female, with handling pressure 7 bar @ 50 to 60 degree, make : janatics. , pu connector , t shape 8mm od tube, with handling pressure 7 bar @ 50 to 60 degree, make : janatics. , pu connector , i shape 8mm od tube, with handling pressure 7 bar @ 50 to 60 degree, make : janatics. , pu connector, t shape 8mm od x 8mm od x 1/4 npt (male) connection, with handling pressure 7 bar @ 50 to 60 degree, make : janatics. , teflon tape, length10mtr,width 12mm,thickness 0.3mm, material ptfe, make : pediliteany standard , pvc steel grip tape size 1.80cm x 6.5mtr x 0.125mm, (pack of 30 assorted rolls), make : steel grip/anchor/pidilite industries ltd. , hot air gun for soldering, quick anti electrostatic rework station , model quick858d, make : shopivate , soldring iron (10w), 220vac,50 hz, with soldring wire & paste, make : tony , desoldering wire (wick) width 2.5mm, length 1.5mtr,material copper, make : technosystems pvt ltd/any brand , desoldering pump cum solder sucker, esd antistatic, hand held, make : any standard , cylinder with female clevis, model no a12032100d 1d, make : janatics , cylinder with female clevis, model no a12040050d 1d, make : janatics , cylinder with female clevis, model no a12063100d 2d, make : janatics , cylinder with female clevis, model no a12040160d 2d, make : janatics , solenoide coil, type ac23a, volt 220vac, power6va, make : janatics , seal kit of cylinder dia 32mm, model no sk0001, make : janatics , seal kit of cylinder dia 40mm, model no sk0002, make : janatics , seal kit of cylinder dia 63mm,model no sk0004, make : janatics , fork for 40mm dia cylinder, model no af010, make : janatics , fork for 40mm dia cylinder,model no af012,make : janatics , fork for 63mm dia cylinder,model no af014, make : janatics , clevis female for 32mm dia cylinder, model no md032, make : janatics , clevis female for 40mm dia cylinder, model no md040, make : janatics , clevis female for 63mm dia cylinder, model no md063, make : janatics , flow control valve (1/8) series gr5 odering no gr5105008, make : janatics , flow control valve(1/4) series gr5 odering no gr5105108, make : janatics , realay board 8channel dual o/p, contact rating 6a, coil supply voltage 24vdc, model no umk 8rels/ksr 24/21/21 2975722, make : phoenix contact , sloenoide valve for bagging m/c with coil, model no ds255sr61, range2 10bar, port1, 2, 4 g1/4 & port3, 5 g1/8, make : janatics , seal kit for sov bagging, model sk4015, make : janetics , ball valve/gate valve 3/8, make : flow check , air filter regulator g 1/4, max : 10bar, set pr:0.2 7bar, connection size : 1/4”npt, model no : frc136113 a, make : janatics , air filter regulator g 1/2, max:10bar, set pr : 0.2 7bar, connection size : 1/2”npt, model no : frlm1 56314, make : janatics , air filter regulator g 3/8, max : 10bar, set pr:0.2 7bar, connection size : 3/8”npt, model no : frlm1 46214, make : janatics , air filter regulator g 1, max : 10bar, set pr:0.2 7bar, connection size : 1”npt, model no : frlm1 76514, make : janatics , solenoid valve , 3 way single coil, single acting, type 3013 6 2g 230v, make : rotex india limited , solenoid valve, 4 way single coil,double acting, type 3012 6 2g 230v, make :rotex india limited , solenoid valve, 3 way double coil,double acting, type 57400 6 2g 230v, make : rotex india limited , mtc cylinder, make : energy tech , sloenoide valve kit for batch type machine, make : energy tech , solenoide valve, modeldg4v 5 8cjv, muh620, make : vickers , sov for qcnrv102, type 51432 40 12r, atm2 10,wo no 109661/1/1, mfg 09/2010,with coil i 24v dc 16,06/2010 09/0932, make : rotex india limited , sov for qcnrv 101a ,type 51432 16 4r, atm2 10, wo no 108464/3/1, mfg 09/2010, make : rotex india limited , sov for qcnrv 104, type 51432 20 4r m6, atm 2 10, wo no 100012/6/1, mfg 11/10, coil i 24v dc 16,11/2010 10029825., make : rotex india limited , sov for qcnrv 103a pa12716 0033, s9 381rf 1/4 ng, make : parker , sov for msdh, type 51424 6 2r, wo no 5b1970/9, atm2 10, make : rotex india limited , sov for air compressor, type 5012 4 2g, wo no 5b2666/75, atm0 6, make : rotex india limited , sov coil for msdh, typei 37 h, supply voltage 24vdc/340ma/8w., make : rotex india limited , double acting actuator, model ecf150, make : rotex india limited , seal kit for double acting actuator, model ecf150, make : rotex india limited , seal kit for double acting actuator, model ecf125, make : rotex india limited , control valve actuator, model ecf110, w.o no 10201614_so, make : rotex india limited , pneumatic valve, pro code50120121e288 size dn300, 12, make : delval , control valve actuator, type da0sr ama1102238, make : deltorq , solid state relay, type emt 48 16dc, load 16a at80 480vac, input 3 32vdc, make : emtech , single relay(solid state) rel mr 24dc/21 2961105, make : phoenix contact , solid state relay with base, rss113024406012000, 6a/250v/ac, supply voltage 24vdc, make : weildmuller , relay with base model no my2n dc24, double pole, make : omron , relay with base mkbp i, contact10a(n.o) 250vac 7agen, cosø=0.4, make : omron , relay with base model no g2r 2 dc24, double pole, make : omron , sov gang with common manifold with 5nos 3/2way+2nos5/2 way single coil for water wash, make : energy tech engineers , sov gang with common manifold with 1no5/2 way single coil for pugmill gate, make : energy tech engineers , sov gang with common manifold with 1no 3/2 way+1no5/2 way double coil for hood, make : energy tech engineers , sov gang with common manifold with 1no 3/2 way+2no5/2 way double coil, for plough, make energy tech engineers , mtc chrage regulator assembly, code et030200400, make : energy tech engineers , mtc pneumatic cylinder with fork,code et030200401, make : energy tech engineers , mtc rubber seal kit, code et030200402, make : energy tech engineers , mtc spring for cylinder, code et030200403, make : energy tech engineers , brake assembly complete for batch type machine, code et010100701, make : energy tech engineers , brake assembly sealkit, code et020200703, make : energy tech engineers , pneumatic operated control valve, assembly 20 nb code et010200901, make : energy tech engineers , pneumatic operated control valve, assembly 25 nb code et010200902, make : energy tech engineers , pneumatic operated control valve, teflon seal kit 20/25 nb code et010200903, make : energy tech engineers , pneumatic operated control valve, rubber seal kit 20/25 nb code et010200904, make : energy tech engineers , pneumatic operated control valve, spring code et010200905, make : energy tech , brass connector 5/16x1/4, code et010201101, make : energy tech engineers , brass connector 1/4x1/4, code et010201102, make : energy tech engineers , brass nut 5/16, code et010201103, make : energy tech engineers , brass nut 1/4, code et010201104, make : energy tech engineers , brass ferule 5/16, code et010201105, make : energy tech engineers , brass ferule1/4, code et010201106, make : energy tech engineers , copper tube 5/16, code et010201107, make : energy tech engineers , copper tube 1/4, code et010201108, make : energy tech engineers , flow control valve 1/4bsp, code et010201109, make : energy tech engineers , hand operated valves, code et010201110, make : energy tech engineers , shuttle valves, code et010201111, make : energy tech engineers , limit switch for break & anti vobling, code et010201112, make : energy tech engineers , proximity switch for break & anti vobling, code et010201113, make : energy tech engineers , coil 230 vac, code et030200105, make : energy tech engineers , 3 way(3/2way) solinoide valve code et020200101, make : energy tech engineers , 4 way(5/2way) single coil solinoide valve code et020200106, make : energy tech engineers , 4 way(5/2way) double coil solinoide valve code et020200107, make : energy tech engineers , plunger assembly double coil solinoide valve code et020200111, make : energy tech engineers , popet assembly double coil solinoide valve code et020200110, make : energy tech engineers , popet assembly double coil solinoide valve code et020200110, make : energy tech engineers , rtd pt 100, il=150mm, od=6mm, type duplex with transmitter output (4 to 20ma), temp. range 0 to 100c, make : pyro/japsin/radix , rtd pt 100, il=150mm, od=6mm, type duplex with transmitter output (4 to 20ma), temp. range 0 to 150c, make : pyro/japsin/radix , rtd pt 100, il=300mm,od=6mm, type duplex with transmitter output (4 to 20ma), temp. range 0 to 400c with hart, make : rose mount/radix , thermocouple , type k, od 06mm, il=400mm, type duplex, make : tempsense/pyro/radix , thermocouple , type j, od 06mm, il=150mm, type simplex, make : tempsense/radix , pressure transmitter,model s10,range minus 760 to 0 mmhg, make : wika , disc rotary valve, connection size:1/4, 10kg/cm2, model no 2armdr h 06, make : airmax , earthing cable armoured, size 25 sqmm, copper, make, , pvc insulated 3core power cable, size 2.5sqmm, armoured, make, , straight connector, contact rating 06a, make : elemax/phoenix contact , lug coppersize 1sqmm, type pin, make : sbs/dowells , lug copper size 1.5sqmm, type pin, make : sbs , lug copper size 0.5sqmm, type pin, make : sbs , temperature controller, model no tc324a 2, size 96x96mm, supply voltage 230vac, o/p rly/ssr, rly, user configrable for j type t/c., make : selec , process controller, i/p : universal type, i/p : 4 20madc, ac supply : 230v, model lc5296h c u1 1 n, size 96x96mm, with two alarm, make : masibus , 24 channel scanner, model 85xx+for rtd,t/c, ma source with relay o/p, make : masibus , (8) channel scanner, model 8208, for rtd pt100, make : masibus , process totalizer, model no 1008s, power supply230vac, i/p 4 to 20ma configrable, make : masibus , ir sensor,od:3/4”, length : 1.5”(brass), make : yutech , donnely chute level indicator cum controller,model no dc 8s 8r bc i/p 06 no infrared sensor, supply voltage 230vac, make : yutech , auto manual controller i/p 4 to 20ma vdc o/p 4 20ma, model no 5002u am, supply voltage 230vac., make : masibus , pressure gauge, range o to 7 bar, dail size 4glycrin filled, connection 1/2npt bottom,with ss bourden tube, make : wika , pressure gauge, range o to 7 bar, dail size 4, connection 3/8 npt bottom, with ss bourden tube, model pgt23.100., make : wika , pressure gauge,range o to 250 bar,dail size 6, connection 1/2 npt bottom, ss bourden tube, body ss, make : h guru. , compound gauge range ( ve)1 to 1.5kg/cm2, connection:3/8bsp,dail size 6, bottom entry, type ss bourden tube, model pgt23.160., make : wika/mass , compound gauge range ( ve)1 to 4.5kg/cm2,connection:3/8bsp,dail size 6, bottom entry, type ss bourden tube, model pgt23.160., make : wika/mass , vaccum gauge, range : 0 to760mm hg, connection:3/8bsp, dail size 6back entry, model pgt23.160., make : wika , vaccum gauge, range : 0 to760mm hg, connection:3/8bsp, dail size 6 bottom entry, model pgt23.160., make : wika , pressure gauge, range o to 10 kg/cm2, dail size 4, connection 3/8bsp bottom entry,digital o/p 4 to 20ma, with ss bourden tube, model : pgt23.160., make wika , pressure gauge, range o to 1.5kg/cm2,dail size 4, connection 3/8bsp bottom entry, digital o/p 4 to 20ma,with ss bourden tube, model : pgt23.160., make wika , master pressure gauge, range:0 2500mmwc, dial size:250mm,bottom entry, ss bourden tube connection 1/2npt(m)., make : wika/waaree , master pressure gauge, range:0 5kg/cm2, dial size:250mm, bottom entry, ss bourden tube connection 1/2npt(m)., make : wika/waaree , shnuber for pressure gauge, size 3/8bsp male to 3/8bsp female, model 910.12, body material ss304., make : wika , pressure gauge syphon, model no 910.15.100, type pig tail for vertical installation, connection 3/8bsp male to 3/8bsp female, body material ss304., make : wika , electronic timmer for air dryer, make : gem , sealkit for air dryer sov, make : gem , main flow sov for air dryer, make : gem , carbon filter for air dryer, make : gem , prefilter for air dryer, make : gem , after filter for air dryer, make : gem , nrv seal kit for air dryer, make : gem , auto drain valve for air dryer, make : gem , positioner for cv model no yt 1000 rdx532510, make : ytc , relay for positioner cv model no yt 1000 rdx532510, make : ytc , relay for positionercv model no yt 1000 ldx, make : ytc , positioner for cv model no yt 1000 ldx, make : ytc , electro pneumatic positioner for cv model no 8013, make : mil , relay sa for e/p positioner for cv model no 8013, make : mil , positioner for cv model no 7401, make : mil , e/p positioner , make forbes marshal, model no 830wp, explosen proof noon explosion proof , relay for e/p positioner, model no rtx1000, make : rotex , linkage assembly for cv positioner model no 8013, make : mil , temperature gauge, range 0 to 200c, bottom entry, type bimetalic, il=300mm, od 8mm,dail size 6, make : mass/general , temperature gauge, range 0 to 200c, bottom entry, type hg infield, il=150mm, od 4mm,dail size 6, capilary extension length 3mtrs, ss body, make : mass/general , temperature gauge, range 0 to 120c , bottom entry, type hg infield,il=150mm, od 4mm,dail size 6, capilary extension length 2mtrs, make : mass/general , slow blow glass fuse 2a/3.15a/1a/250ma/500ma/5a/10a, make, , standard vacuum manometer hg filled range 0 to 760mm of hg,type single limb tube,accuracy ±0.25% of fsd,cashing die cast alumnium with transparent acrylic front cover, unit mmhg,wetted part ss 304, end connection 1/4bsp,mounting stand,metering tube mercury filled uniform bore, one end shield,with catch port., make, , mv/ma source calibrator, model no tcs 4050m, make : masibus , digital multimetermodel no f15b, make : fluke , trms digital multimeter, model rishabh616, make : rishabh , 8 port ethernet switch 10/100/1000mbps, model dgs 1008a, make : dlink , media converter set for dcs, model no dmc g1000sc, make : d link , analog input(ai) card 7017, input channels: 8, analog input type: ma, power supply: 10 to 30vdc, mounting din rail., make : icp das , ao module7024d,output channels: 4, analog output type: ma, power supply: 10 to 30vdc, mounting din rail, make : icp das , di module 7041d,input channels: 14, digital input type: sink/source, power supply: 10 to 30vdc, make : icp das , do module 7042d,output channels:13, digital output type: sink, power supply input: 10 to 30vdc, mounting din rail, make : icp das , protection card(8ai,2ao,2di) for icpcon plc for spray engineering devices panel , pressure transmitter, range: 0 5 bar, for spray engineering devices panel , pressure transmitter, range: 0 1.6 bar, for spray engineering devices panel , pressure switch, kp 35,model: kp 35 (for high pr.) range : 0.2..7.5bar, differential.: 0.7…4bar,process con.: g1/4, directive:emc directive 89/336/eec, en 61000 6 2,en 61000 6 3, make : danfoss , pressure switch, model: rt 121 (for low pr)., range : 1…0bar,differential: 0.09 to 0.4bar, process con.: g3/8, directive:emc directive 89/336/eec,en 61000 6 2, en 61000 6 3, make : danfoss , vibrating fork level switch,supply voltage: 12 to 55vdc,amb. temp.( 40 to 70deg c), ip 65, thread size: 1”bsp, selectable switch for high/low mode setting , probe length 69mm, make : e&h , temperature transmitter tt 100,range: 0 100 deg c, type: 2wire, output signal: 4 20ma, accuracy: +1% deg c of fsd, housing protection: ip65, input voltage: 24vdc (+2v), stem length 150mm, make : sed. , temperature transmitter tt 100l,range: 0 100 deg c, type: 2wire, output signal: 4 20ma, accuracy: +1% deg c of fsd, housing protection: ip65, input voltage: 24vdc (+2v), stem length 1000mm. make : sed. , temperature transmitter tt 150,range: 0 150 deg c, type: 2wire, output signal: 4 20ma, accuracy: +1% deg c of fsd, housing protection: ip65, input voltage: 24vdc (+2v), stem length 150mm. process conection:1/2 bsp(male), make : sed , power supply, rating: 10amps,input : 24v ac,output: 24 v dcfor spray engineering devices panel , diode o ring , model ulpeddio 20amp. module, size: 66x92mm, piv of diode: 1200v, current: 20a , micro switch 2no+2nc, contact rating 5a at 220vac, ms 1 l, make elcom , level switch (vibration frock ), model no ftl 20 0020 dc pnp, supply 10 to35vdc, connection size g1/2., make : e&h , head mounted temperature transmitter, range:0 400°c, make for k type thermocouple, model no 248 hananonsq4, make : rosemount , flow trnasmitter, model no 8732estiaie5m4, sr. no. 06019527,line size 3, make : rosemount , flow transmitter, model no 8732estiaie5m4, line size 2, make : rosemount , pull chord switch for bet convers, model sw4037, ip66 protection, 2no+2nc, contact rating 6a, 230vac, make : jayshree electrodevices pvt ltd , belt sway switch for bet convers, 2no+2nc, contact rating 6a, 230vac,model sw4027, make : jayshree electrodevices pvt ltd , zero speed switch for belt convers, 2no+2nc, contact rating 5a, 230vac,series rme221 nitd ca22 b30, supply voltage 110/240vac, speed setting range 5 to 50 rpm, make : jayshree electrodevices pvt ltd , signal converter 9000u dop series with dual o/p 4 to 20ma,supply voltage 18 to 36vdc.i/p 4 to 20ma, make : masibus , signal isolator 9000u t with dual o/p 4 to 20ma,supply voltage 85 to 265vac @50hz, i/p 4 to 20ma., make : masibus , current (0 to 1a) to (4 to 20ma) converter, supply 230vac, make : masibus , current (0 to 5a) to (4 to 20ma) converter, supply 230vac, make : masibus , watt. transducer model no dw30114fc, 3phase 4wire 3element, i/p 1a(ac), 63v(ac)@50hz, external power240v(ac), calibration 0 to63watts/element, 4 to20ma(dc) into 750 ohms., make : masibus , ring spanner set(6 23mm), make : taparia , d spanner set(6 23mm), make : taparia , adjustable spanner set(8&12), make : taparia , universal tool kit 1001,cotains adjustable spanner(size 6) 1170 6 c.p, insulated plier (size 6)1621 6, screw driver set802 screw driver 932 and 839, with carry casing,make : taparia , nose plyer 8, make : taparia , pipe wrinch 14, make : taparia , combination plier size 8, make : taparia , allen key set mm & inch, make : taparia , jumbo displaysize 8, 7 segment 4 digit, process indicatorfori/p 4 20ma, o/p 0 to 9999 supply 220vac, make : electromed/masibus , 409 4in large display indicator, supply voltage 230vac, i/p 4 20ma , o/p display range 0 to 9999 with ip65 encloser with wall mount encloser, make : masibus , panel exhaust fan, type squre, size 4, operating voltage 230vac, make : any standard , panel exhaust fan, type squre, size 6, operating voltage 230vac, make : any standard , panel air filter size (6x6x8mm), make : any standard , ball valve/gate valve 1/4, make : flow check , line tester, make taparia, supply range 500vac , thermowell od=1/2, length 10, moc m.s , thermowell od=1/2, length 6, moc m.s , screw driver set, make : taparia , taparia 2 philips 6.0x0.8mm two in one screw driver, 907, blade length : 200 mm , taparia ws06 wire stripping plier , taparia 1441 5s internal 5 inch circlip plier , hard disk for desktop pc of dcs capacity 1tb, make : segate/westeern digital , smps of pc of dcs 24 pin,500 wat, i/p supply 230vac, make : intex/iball/mercury , main board (motherboard) of pc for dcs, model no pih55z, make : mercurry , combo set of optical mouse & key board with mousee pad, make hp/iball/tvs /dell , ram ddr3, 4gb for pc of dcs , power adopter 12 vdc,2a, i/p supply 90 250vac@50hz , power adopter 24 vdc, 2a, i/p supply 90 250vac@50hz , contact cleanerfor non live application,oks no2621, article no 5302621305, content 500ml, 275 gram, make : kluber lubrication india private limited , aaa/aa battery 1.5vdc, any standard, make : duracell , 9 vdc battery, make : duracell , rs 485 to rs 232 serialconverter with cable &driver cd, make : at for plc , cable gland 1/2npt connection with double compression, any standard , ktype thermocouple, od=6mm, il=1000mm, make : tempsense/pyro/radix , controller model xe231 make ge fanuc with card model no : xyc007 , controller with level transmitter supply 230vac o/p no nc make ge fanuc , vacuum cleaner supply 230vac,power 1400watts,wet & dry cleaning, model no ultimo p, make : eureka forbes. , bench/table top hydraulic dead weight testers, accuracy : ±0.015% reading, ranges : 0 to 700 bar, features : oil operated pump with built in priming, piston type : single / dual, weights : stainless steel, units : bar/kg/cm2/psi. make : yantrik/radix/ravika , cpu wp 8147, for sedl plc , make: icp das, specification : cpu: pxa270, 32 bit and 520 mhz or compatible os: windows ce 5.0,sram: 512kb, eeprom: 16kb, software installed: isagraf, power supply: 10 to 30vdc. , pressure transmitter, make : honeywell, model no.: stg74s e1g000 1 c ahs 11c b 11a0 f1 0000, supply : 11to 42vdc, range: 14.7 to 500 psi, fact cal: 0 to 35 bar , hydraulic pressure comparator, range 0 250 bar,model gcl 250,make : nagman® , master digital pressure gauge, range 0 250 bar,model mpc h i 250,accuracy 0.05% fs, make : nagman® , multifunction calibrator, model: nagman 25, make : nagman® , combined hand held vaccum & pressure hand pump, model : php60,range 0.9 bar vacuum to 60 bar pressure, medium air, sensitivity / resolution upto 1 mbar, make : nagman. , hand pump, ranges upto 700 / 1000 bar, medium oil / (water : optional), make : nagman , protable pressure calibrator, model : ppc pl, make : nagman , protable pressure calibrator, model : mpc p2, make : nagman , series iii high pressure electrode for hydrastep level indicator with p/n. 246781za rating : 210 bars at 370 deg c, make : delta mobrey ltd uk , remote panel mounting display with part number : 24683bb din modular panel mounted type, make : delta mobrey ltd uk , hand held metal detector for industrial use, make : any standard , exhaust for electro pneumatic positioner, make: ksb mil control ltd, model : 8013, serial no. ep192990 , pressure gauge, range: 0 25 kg/cm², connection size: 1/2 npt, dial size:6 bottom entry, make : h guru/any standard , temperature gauge, range 0 to 400°c, bottom entry, type hg infield, il=300mm, od 8mm, dail size 6, make : mass/general , cylinder for id fan, size: od 6 * 12 length, model : 10110086 , cylinder for fd fan, size: od 3 * 12 length, model : 10110086 , cylinder for id fan, size: od 4 * 12 length, model : 10110089...

Due Date : July 15, 2024

Tender Value : ₹ Ref. Documents

View Tender
46
Bharatiya Rail Bijlee Company Limited - Bihar

43927295 procurement of sky climber spares. , guide washer,41008049,sky climber , disc spring,12000518,sky climber , pressure bolt,41008003,sky climber , seal,52008277,sky climber,alpha 800 , ball bearing,26008529,sky climber , female plug housing,53008749,sky climber , contactor,53008932,sky climber,alpha 800 , hex soc cap screw,11002230,sky climber , cooling fan cover,h2980503,skyman , main contactor,53008439,sky climber , nc switch element,53008674,sky climber , spring speed sensor,56008971,sky climber , end plug,41008217,sky climber , brake hub,41008128,sky climber,alpha 800 , release handle assy,41008218,sky climber , power supply cable,53009014,boiler , safety device,56009847,greaves cotton , serated lock washer,12000406,sky climber , bolt,11006380,sky climber , self locking hex nut,12005512 , wire rope,sky climber,alpha 800 , flat spacer,41008045,sky climber...

Due Date : July 06, 2024

Tender Value : ₹ Ref. Documents

View Tender
47
East Central Railway - Bihar

43926784 supply of micro controller based electronic speed indicating and recording system.micro controller based electronic speed indicating and recording system.,micro controller based electronic speed indicating and recording system type mrt 918 for towe r wagon/car working voltage 110v, maximum speed 160 kmph as per rdso specification no. mp.0.3700 07 rev.07, august 2017, each set consisting of following items: (1.) recorder cum indicator 01 no. (2.) additional i ndicator 01 no. (3.) speed sensor 01 no. (4.) junction box 01 no. (5.) connecting cables 01 set. (6.) mounting accessories 01 set foot mounting type. requirement of cable length details: (a) master power cable from batt ery to recorder=30 feet. (b) master signal cable from recorder to junction box=30 feet. (c) slave power cable f rom battery to indicator=30 feet. (d) master to slave communication cable length = 130 feet. instead of existing entry as per rdso specification no. mp.0.3700 07 rev.07, august 2017. make/brand medha only. [ warranty period: 30 months after the date of delivery ]...

Due Date : July 09, 2024

Tender Value : ₹ Ref. Documents

View Tender
48
East Central Railway - Bihar

43926758 supply of spare parts of tower wagon.spare parts of tower wagon.,engine speed sensor. make ashok leyland only [ warranty period: 30 months after the date of delivery ] , water temperature sensor. make ashok leyland only. [ warranty period: 30 months after the d ate of delivery ] , sensor oil, pressure & temperature. make ashok leyland only. [ warranty period: 30 months af ter the date of delivery ] , turbocharger. make ashok leyland only. [ warranty period: 30 months after the date of delivery ] , oil pressure sensor and switch. make ashok leyland only. [ warranty period: 30 months after t he date of delivery ] , temperature sensor. make ashok leyland only. [ warranty period: 30 months after the date of d elivery ] , water pump sub assembly. make ashok leyland only. [ warranty period: 30 months after the d ate of delivery ] , thermostat. make ashok leyland only. [ warranty period: 30 months after the date of delivery ] , starter motor. make ashok leyland only. [ warranty period: 30 months after the date of delivery ] , alternator. make ashok leyland only. [ warranty period: 30 months after the date of delivery ] , belt tensioner.make ashok leyland only. [ warranty period: 30 months after the date of delivery ] , poly v belt fan drive. make ashok leyland only. [ warranty period: 30 months after the date of d elivery ] , poly v belt ac compressor drive. make ashok leyland only. [ warranty period: 30 months afte r the date of delivery ] , wiring harness ac conn edc 17 08 mtr. make ashok leyland only. [ warranty period: 30 months after the date of delivery ] , ecu interface eng. safety unit ip67. make ashok leyland only. [ warranty period: 30 months af ter the date of delivery ] , exhaust bellow n6 eng. make ashok leyland only. [ warranty period: 30 months after the date of delivery ] , crs ecu for neptune. make ashok leyland only. [ warranty period: 30 months after the date of delivery ] , air compressor assembly. make ashok leyland only. [ warranty...

Due Date : July 09, 2024

Tender Value : ₹ Ref. Documents

View Tender
50
National Thermal Power Corporation Limited - Bihar

43844626 abb make spares for main plant offsite areas npgc , pre amp circuit board,758003,caldos 17 , pwr supp,3kxg758003u0400,abb , display h2 anal,769149,abb , flame arrestor,19516574,abb , five way ball valve, 19917027,analyser , analog o/p card,990055,abb , pwr supply mod,4201073786,abb,cp e24v20a , power supply module,cp e 24,abb , conductivity sensor,tb27.001.1.1.1.0.0c2 , power supply module,cp e 24v 5a,abb , thermal trip,745836,abb...

Due Date : June 28, 2024

Tender Value : ₹ Ref. Documents

View Tender